Brown wooden frame with red coloured beads/counters on thin pieces of dowel. Frame is connected together with metal right-angle bracketseducation, school, abacus, counting, maths

Set of four colour photographs of overhead /bracket arm pole work in conjunction with Powercor on 16.08.2005 in Wendouree Parade. Taken by Carolyn Dean.On rear of all photos "16.8.05" and "Photo by Carolyn Dean" in ink.wendouree parade, overhead, bracket arms

Slide, Allan Budge Collection: house, Queen Street. Verandah Friezes In Timber. Frieze in wood - note the 'Sun' inserts. The eave brackets are distinctive.house, public, allan budge collection:, allan budge collection:

Matching carry box for Astro Compass 98.1Wooden box painted blue grey, hinged lid with brass latches. Mounting brackets inside to stow Astro Compass. Canvass shoulder strap (broken)Delicate Instrument To Be Handled With Great Care, Astro Compass Mk.IIcarry box, storage box, box, astro compass, cramer

Surrey Hills Mounted Police Station was located at 5 Suffolk Road (dem.) from 1889-1914. It was a police residence with two rooms as the police office and workshop. There were stables on the back fence. The property adjoined Wyclif Church in Norfolk Road. Gilbert McCallum rented from c.1914-1923 when he built a home in Westminster Street. It is his son Archie who can just be seen on the front steps. Archie remembers the 2 storied stables with a gantry for hauling feed sacks up with a block and tackle, then a polished wood slide to send the feed down. The McCallum children and local friends found this to be a marvellous slide. David McPhie, ex-police force, lived here with his family from 1923-c.1950. A black and white photograph showing a mid to late Victorian style weatherboard house with decorative brackets under the eaves. The verandah is of timber with decorative timber fretwork.surrey hills mounted police, suffolk road, surrey hills, wyclif church, (mr) gilbert mccallum, (mr) david mcphie, police, (master) archie mccallum

Probably of US origin Can , Meat (Mess Kit), M-1910, M-1918 The older style mess kits had the flat lid that could also be used as a plate. The M-1932 (not unit in our collection) unit had the plate divided into two sections so food could be separated. The folding handle, when closed, fits into the groove formed by the divider. The ring on the plate was moved to the end of the groove so the lip of the handle fits right into it. The M-1932 Meat Can was made of "corrosion resistant" galvanized steel, not aluminium. It used the same WW I style narrow profile steel handle attached by a cast hinge.Oval aluminium mess kit with steel handle which acts as a lid lock when folded. Cover has a mounted bracket for a ring fitting for attachment to belt.Nilmess kit, m-1918, m-1910

WT George & Co of Sherlock Street Birmingham were makers of ships lanterns under the trade name “Meteorite”. In 1941 Thomas George writer assumes a relative of WT George was granted a patent number GB546575 relating to improvements to his lamps. After this date a plate was affixed with this number. What's confusing with the companies records is that they show that in Birmingham three companies are listed making lamps together and the writer is assuming under a partnership agreement. First in 1983 W T George & Co with William Harvie & Co went into liquidation with G Bocock & Co, together, then in 1992 George Bocock and Harvie Ltd were in liquidation. Although these companies seem to have different addresses in Birmingham they were linked together given they were all liquidated at the same time for two of them. They all appear to have been partners in some way making marine lamps under the William Harvie banner. William Harvie & Co. Ltd advertised as being electric light and power engineers, and patent ship lamp manufacturers, as early as 1901-1902, as listed in the Post Office annual Glasgow Directory 1901-1902.An item made by a company that was an innovator of significant improvements in the manufacture of marine signal and navigation lamps during the late 19th and 20th centuries. Lamps made by this manufacturer are now sought after collector's items that are of significant value. Lamp, round ship's copper lamp with clear glass, handle at top, fitted with hinged and catch section at top to service lamp. Bracket at back for hanging lamp. Stamped "Meteorite 110560" Bottom stamped "Patent no GB546575 and others pending".warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, lamp, round ship's lamp, kerosene marine lamp, w t george & co, william harvie & co, george bocock & co

A Frame Bearing bracket. Made from pressed steel. Made by Standard Pressed Steel Co Jenkintown USA. Height 600mm width 400mm Circa 1960flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

A Frame Bearing bracket. Made from pressed steel. Made by Standard Pressed Steel Co Jenkintown USA. Height 600mm width 400mm Circa 1960flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

A Frame Bearing bracket. Made from pressed steel. Made by Standard Pressed Steel Co Jenkintown USA. Height 600mm width 400mm Circa 1960flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Hand operated rope making machine with hooks for 5 strands. Mounted on a steel angle bracket bolted to a piece of timber. Handle painted green, remainder unpainted.Nonemachine tool; metalcraft; rope

Dyeline print of MMTB Drawing R7489 - "Class SW6 Car Stanchion Bracket", Rev C, dated 1/7/1957. Gives pattern numbers and material.Hand date stamp on bottom right hand corner of "12 Sep 1969". Stamped "P/O 34597 return to drawing on completion of job", drawing number and summary title on outside.trams, tramways, sw class, drawings

Newspaper cuttings from The Courier, Ballarat, August 11 1977 with photos of SEC tram No. 11 returning to Ballarat from Sebastopol. 1112.1 - from the page with the Editorial, has a photo (large portion from the bottom left hand corner missing of the rear of the crane) being unloaded at Sebastopol for storage with a column of text detailing the story of the tram and the BTPS plans. Also refers to another photo on page 15. 1112.2 - from page 15 of the Courier, with Jack Chadwick standing on the front step of the tram, outside the entry to the Smythes Road, Sebastopol storage building. Has an inset item on the story. See Reg Item 3827 for a print of the actual photograph.1112.2 - in central right hand side in brackets in blue ink (page(15) and on rear top edge "11/Aug. 1977." in blue ink.trams, tramways, btps, sebastopol, 11, daylesford, tramcar acquisition

This hand pump would have been used on a tubed tyre. Hand pumps similar to this one were in use in the late 19th century through to the latter half of 20th century.During the 1930s and immediate post-World War II period few people owned cars as they were too expensive. To get to work most people either walked, relied on public transport, rode a bicycle or, if they could afford one, a motorcycle. A cylindrical silver metal bicycle tyre hand pump. It has a valve connection which is cloth covered and fits inside for storage. It can be fitted to a bracket on the bike frame.bicycle transport hand-pump

pencil on paper student's technical drawings .1) Bracket for striking gear .2) Lever safety valve .3) belt driven hoisting winch, 500 lb capacity technical drawing, mechanical engineering, geoff biddington

Has a strong association with a BTM/BTPS volunteer - c1973.Black and white photograph of Warren Doubleday, late 1973 working on the overhead bracket arm, from the ladder truck. Can't remember who took the photograph and provided the print.tramways, trams, volunteers, btps, overhead

Originally used in the Electrical Engineering Department at the Ballarat College of Advanced Education.Light coloured wood box with hinged lid. Metal brackets for carrying handle strap - missing. Inside, wooden section with sliding knob. This is the sliding contact for metal bars underneath.Diagram on blue paper attache to inside of lid. Stencilled on front "P1 4". On DYMO tape of side of box "USE WITH FREQ METER". Aluminium sticker on lid - "BALLARAT C.A.E." Scratched beneath this "ELEC / ENG DPT" electrical engineering, ballarat college of advanced education, electrical instrument, sliding resistance, scientific instruments

Slide, ALLAN BUDGE COLLECTION, General Views, Short Street. Nicely kept timber house. Note the eaves brackets, lacework, triangular vents in the roof and the louvres in the gable ends.house, public, allan budge collection, allan budge collection

of critical significance WOODEN BIN WITH LID AND LEGS - rectangular wooden bin with loose lid and 4 legs. Metal brackets are nailed to the four sides of the top and bottom bin as well as the corner sides.

Used for carrying papers or alternatively clothing Ca 1900Manufactured by Holden and FrostRectangular shaped leather case, hinged in center, lockable, lock in center of case, under leather handle. Two steel brackets on top to allow locking straps to stay in place.S.B.B.leather, lockable, gladstone, bag

as used on horses to pull a variety of heavy equipment Ca 1900as manufactured and sold by Holden and FrostShaped to fit on horses back with two straps that fit around horses belly Two metal rings for reins two brackets for strapping and a metal buckle on end of belly bandPatent etched on saddle surfacecart / van tree, equine

used circa 1900 in agriculture and on draught horsesAs manufactured and sold by Holden and FrostShaped to fit on horses back with two straps that fit around horses belly two metal rings for reins two brackets for strapping and a metal buckle on the end of the belly bandPattern etched on backsaddle cart, equine, agriculture

Used on horse drawn vehicles, agricultural and social Ca 1900Manufactured and sold by Holden and FrostShaped to fit horses back with two straps that fit arond horses girth . Two metal rings for reins Two brackets for strapping and a metal buckle on end of Girth strapPattern etched on saddle surfaceequine, saddle cart, agricultural

HISTORY OF THE LOCH ARD: - The Loch Ard got its name from ”Loch Ard” a loch that lies to the west of Aberfoyle, and to the east of Loch Lomond. It means "high lake" in Scottish Gaelic. The vessel belonged to the famous Loch Line which sailed many vessels from England to Australia. The Loch Ard was built in Glasgow by Barclay, Curdle and Co. in 1873, the vessel was a three-masted square-rigged iron sailing ship that measured 79.87 meters in length, 11.58 m in width, and 7 m in depth with a gross tonnage of 1693 tons with a mainmast that measured a massive 45.7 m in height. Loch Ard made three trips to Australia and one trip to Calcutta before its fateful voyage. Loch Ard left England on March 2, 1878, under the command of 29-year-old Captain Gibbs, who was newly married. The ship was bound for Melbourne with a crew of 37, plus 17 passengers. The general cargo reflected the affluence of Melbourne at the time. Onboard were straw hats, umbrellas, perfumes, clay pipes, pianos, clocks, confectionery, linen and candles, as well as a heavier load of railway irons, cement, lead and copper. There were other items included that were intended for display in the Melbourne International Exhibition of 1880. The voyage to Port Phillip was long but uneventful. Then at 3 am on June 1, 1878, Captain Gibbs was expecting to see land. But the Loch Ard was running into a fog which greatly reduced visibility. Captain Gibbs was becoming anxious as there was no sign of land or the Cape Otway lighthouse. At 4 am the fog lifted and a lookout aloft announced that he could see breakers. The sheer cliffs of Victoria's west coast came into view, and Captain Gibbs realised that the ship was much closer to them than expected. He ordered as much sail to be set as time would permit and then attempted to steer the vessel out to sea. On coming head-on into the wind, the ship lost momentum, the sails fell limp and Loch Ard's bow swung back towards land. Gibbs then ordered the anchors to be released in an attempt to hold their position. The anchors sank some 50 fathoms - but did not hold. By this time the ship was among the breakers and the tall cliffs of Mutton Bird Island rose behind. Just half a mile from the coast, the ship's bow was suddenly pulled around by the anchor. The captain tried to tack out to sea, but the ship struck a reef at the base of Mutton Bird Island, near Port Campbell. Waves subsequently broke over the ship and the top deck became loosened from the hull. The masts and rigging came crashing down knocking passengers and crew overboard. When a lifeboat was finally launched, it crashed into the side of Loch Ard and capsized. Tom Pearce, who had launched the boat, managed to cling to its overturned hull and shelter beneath it. He drifted out to sea and then on the flood tide came into what is now known as Loch Ard Gorge. He swam to shore, bruised and dazed, and found a cave in which to shelter. Some of the crew stayed below deck to shelter from the falling rigging but drowned when the ship slipped off the reef into deeper water. Eva Carmichael a passenger had raced onto the deck to find out what was happening only to be confronted by towering cliffs looming above the stricken ship. In all the chaos, Captain Gibbs grabbed Eva and said, "If you are saved Eva, let my dear wife know that I died like a sailor". That was the last Eva Carmichael saw of the captain. She was swept off the ship by a huge wave. Eva saw Tom Pearce on a small rocky beach and yelled to attract his attention. He dived in and swam to the exhausted woman and dragged her to shore. He took her to the cave and broke the open case of brandy which had washed up on the beach. He opened a bottle to revive the unconscious woman. A few hours later Tom scaled a cliff in search of help. He followed hoof prints and came by chance upon two men from nearby Glenample Station three and a half miles away. In a complete state of exhaustion, he told the men of the tragedy. Tom then returned to the gorge while the two men rode back to the station to get help. By the time they reached Loch Ard Gorge, it was cold and dark. The two shipwreck survivors were taken to Glenample Station to recover. Eva stayed at the station for six weeks before returning to Ireland by steamship. In Melbourne, Tom Pearce received a hero's welcome. He was presented with the first gold medal of the Royal Humane Society of Victoria and a £1000 cheque from the Victorian Government. Concerts were performed to honour the young man's bravery and to raise money for those who lost family in the disaster. Of the 54 crew members and passengers on board, only two survived: the apprentice, Tom Pearce and the young woman passenger, Eva Carmichael, who lost her family in the tragedy. Ten days after the Loch Ard tragedy, salvage rights to the wreck were sold at auction for £2,120. Cargo valued at £3,000 was salvaged and placed on the beach, but most washed back into the sea when another storm developed. The wreck of Loch Ard still lies at the base of Mutton Bird Island. Much of the cargo has now been salvaged and some items were washed up into Loch Ard Gorge. Cargo and artefacts have also been illegally salvaged over many years before protective legislation was introduced in March 1982. One of the most unlikely pieces of cargo to have survived the shipwreck was a Minton majolica peacock- one of only nine in the world. The peacock was destined for the Melbourne 1880 International Exhibition. It had been well packed, which gave it adequate protection during the violent storm. Today the Minton peacock can be seen at the Flagstaff Hill Maritime Museum in Warrnambool. From Australia's most dramatic shipwreck, it has now become Australia's most valuable shipwreck artifact and is one of very few 'objects' on the Victorian State Heritage Register.The shipwreck of the Loch Ard is of significance for Victoria and is registered on the Victorian Heritage Register ( S 417). Flagstaff Hill has a varied collection of artefacts from Loch Ard and its collection is significant for being one of the largest accumulation of artefacts from this notable Victorian shipwreck. The collections object is to also give us a snapshot into history so we are able to interpret the story of this tragic event. The collection is also archaeologically significant as it represents aspects of Victoria's shipping history that allows us to interpret Victoria's social and historical themes of the time. The collections historically significance is that it is associated unfortunately with the worst and best-known shipwreck in Victoria's history. Heavy duty brass sleeve retrieved from the wreck of the LOCH ARD. It is pinched and broken off at one end, enclosing an extendable inner sleeve, which is connected to a brass bracket fixed at right angles. The circular enclosing bracket would hold (and fix by an adjustable brass screw) a through or cross pipe of similar diameter to the outer sleeve. The artefact is a structural piece delivering vertical support to a horizontal rail (missing) and not for transporting gas. It is constructed of thick gauge metal suitable for weight/load bearing and its sliding sleeve design is similar to a modern shock absorber, or a telescopic leg supporting a surveying instrument. There is concreting sediment immobilising the sleeves and lining the inner surface of the bracket. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, loch line, loch ard, captain gibbs, eva carmichael, tom pearce, glenample station, mutton bird island, loch ard gorge, brass fitting, brass pipe, 1878 shipwreck

When the ship Schomberg was launched in 1855, she was considered the most perfect clipper ship ever to be built. James Blaine’s Black Ball Line had commissioned her to be built for their fleet of passenger liners. At a cost of £43,103, the Aberdeen builders designed her to sail faster than the quick clippers designed by North American Donald McKay. She was a three masted wooden clipper ship, built with diagonal planking of British oat with layers of Scottish larch. This luxury vessel was designed to transport emigrants to Melbourne in superior comfort. She had ventilation ducts to provide air to the lower decks and a dining saloon, smoking room, library and bathrooms for the first class passengers. At the launch of Schomberg’s maiden voyage, her master Captain ‘Bully’ Forbes, drunkenly predicted that he would make the journey between Liverpool and Melbourne in 60 days. Schomberg departed Liverpool on 6 October 1855 with 430 passengers and 3000 tons cargo including iron rails and equipment intended the build the Geelong Railway and a bridge over the Yarra from Melbourne to Hawthorn. The winds were poor as Schomberg sailed across the equator, slowing her journey considerably. She was 78 days out of Liverpool when she ran aground on a sand-spit near Peterborough, Victoria, on 27 December; the sand spit and the currents were not marked on Forbes’s map. Overnight, the crew launched a lifeboat to find a safe place to land the ship’s passengers. The scouting party returned to Schomberg and advised Forbes that it was best to wait until morning because the rough seas could easily overturn the small lifeboats. The ship’s Chief Officer spotted SS Queen at dawn and signalled the steamer. The master of the SS Queen approached the stranded vessel and all of Schomberg’s passengers were able to disembark safely. The Black Ball Line’s Melbourne agent sent a steamer to retrieve the passengers’ baggage from the Schomberg. Other steamers helped unload her cargo until the weather changed and prevented the salvage teams from accessing the ship. Local merchants Manifold & Bostock bought the wreck and cargo, but did not attempt to salvage the cargo still on board the ship. They eventually sold it on to a Melbourne businessman and two seafarers. After two of the men drowned when they tried to reach Schomberg, salvage efforts were abandoned.32 In 1975, divers from Flagstaff Hill, including Peter Ronald, found an ornate communion set at the wreck. The set comprised a jug, two chalices, a plate and a lid. The lid did not fit any of the other objects and in 1978 a piece of the lid broke off, revealing a glint of gold. As museum staff carefully examined the lid and removed marine growth, they found a diamond ring, which is currently on display in the Great Circle Gallery.33 Flagstaff Hill also holds ship fittings and equipment, personal effects, a lithograph, tickets and photograph from the Schomberg. Most of the artefacts were salvaged from the wreck by Peter Ronald, former director of Flagstaff Hill. The Schomberg, which is on the Victorian Heritage Register (VHR S612), has great historical significance as a rare example of a large, fast clipper ship on the England to Australia run, carrying emigrants at the time of the Victorian gold rush. She represents the technical advances made to break sailing records between Europe and Australia. Flagstaff Hill’s collection of artefacts from the Schomberg is significant for its association with the shipwreck. The collection is primarily significant because of the relationship between the objects, as together they have a high potential to interpret the story of the Schomberg. It is archaeologically significant as the remains of an international passenger Ship. It is historically significant for representing aspects of Victoria’s shipping history and for its association with the shipwreck and the ship, which was designed to be fastest and most luxurious of its day Gas Light Fitting, Brass wall mount of a swinging armed gas bracket, with gate valve. Has heavy concretion. Artefact Reg No S/76. Recovered from the wreck of the Schomberg.warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, schomberg, shipwrecked-artefact, clipper ship, black ball line, 1855 shipwreck, aberdeen clipper ship, captain forbes, peterborough shipwreck, ss queen, gas light fitting, brass gas light fitting

Brass dinner bell mounted on polished wood board. The bell features a white cord attached to the central ringer. the bell is fixed to the wood mount board with a brass bracket and brass bolts.