The kidney shape is for fitting into a kidney shaped steel mug which then fits into a webbing pouch for fitting against the body. This type was used through the Vietnam era and beyond.Green plastic kidney shaped water bottle with screw top lid attached.On one side, “For water only, do not apply canteen to open flames or burner plate”. On the base, “1968 8465 - 71 - 108 - 3703”water bottle, equipment

Personal equipment issueGreen plastic canteen with screw cap attached, capacity 1 litreFOR WATER ONLY DO NOT APPLY CANTEEN TO OPEN FLAME OR BURNER PLATES NYLEX 1995 Govt arrow 8465-66-086- 8349water bottle, equipment

Francis Powell (1861-) and Francis Hanmer (1858-1925) founded Powell and Hanmer Ltd in the Summer of 1885 for the manufacturer of bike and carriage lamps. Their first advertisements began to appear in November of 1885. In 1890 they lodged a Patent for “velocipede” lamps to be used by lightweight wheeled vehicles propelled by a rider, such as a bike, tricycle and railroad handcar. In April of 1913, they were selling headlamps for cars and in 1914 built their second factory manufacturing dynamo lighting sets in Rocky Lane Birmingham, also for the production of dynamos for motor cars. Then in 1929 Powell and Hanmer Ltd, was acquired by the Lucas company which was at that time the main competitor for the manufacture of non-electrical equipment for cycles and motorcycles. When a director of Powell and Hanmer joined the board of Austin motor cars, Lucas feared that Austins might encourage Powell and Hanmer to start to produce electrical equipment for supply to the company and as a result this association might affect Lucas's business with other large vehicle manufacturers. As a result, Lucas made an offer to Powell & Hanmer and purchased the business for £500,000. Carbide lighting was used in rural and urban areas of Australia which were not served by electrification. Its use began shortly after 1900 in many countries and continued past the 1950s. Calcium carbide pellets were placed in a container outside the home, with water piped to the container and allowed to drip on the pellets releasing acetylene. This gas was piped to lighting fixtures inside the house, where it was burned, creating a very bright flame. Carbide lighting was inexpensive but was prone to gas leaks and explosions. Early models of the automobile, motorbike and bicycles used carbide lamps as headlamps. Acetylene gas, derived from carbide, enabled early automobiles to drive safely at night. Thick concave mirrors combined with magnifying lenses projected the acetylene flame light. These type of lights were used until reliable batteries and dynamos became available, and manufacturers switched to electric lights. Acetylene lamps were also used on riverboats for night navigation. The National Museum of Australia has a lamp made in about 1910 that was used onboard the PS Enterprise, an 1878 Australian paddle steamer, currently owned by the National Museum of Australia in Canberra. It is still operational, and one of the oldest working paddle steamers in the world, listed on the Australian Register of Historic Vehicles.Acetylene Carbide lamp, marine pattern burner housing and reflector missing Carbide Lamp, metal. Has plate for attaching to wall, & gimbal to allow lamp to remain vertical. Noneflagstaff hill, warrnambool, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, carbide lamp, motor vehicle, bike lamp, lighting, vehicle lighting, powell, hanmer, acetylene gas lamp, early lighting, marine lighting

Part of the original fittings of the house when M's Dobson purchased the home. Matches a gas fire in the lounge room.Cream enamelled METTERS Gas Copper, complete with lid, burners, flue and drain cock. Consists of internal copper boiler . external enamelled surround and mounted on four legs.Light Here|Metter K.F.B. Pty Ltd Footscray. Gas Wash Boiler| N.T.I. 35000 B.Th. U/hr at 3' W.G|Capacity 12 Gallons| Serial Number No. 85domestic items, laundering

Murray Robert Shapter donated these lighthouse fittings. He was a local fisherman and employee of the Public Works Lighthouse service for many years in the Queenscliff and Point Lonsdale area.Fittings from two lighthouses in the Queenscliff / Point Lonsdale area. Key to switch sunvalve on or off and an acetylene pilot light burner from the light at the Black Lighthouse in Queenscliff, and a bolt head sheared off the dome of the Point Lonsdale Lighthouse.lighthouse maintenance, fittings

.1) Stove, cooking Gasoline, one burner, Model M-1950. .2) Spanner for above stove. .3) Tool for above stove. .4) Cardboard carton for above stove.domestic items-cooking, military equipment - army

Alfred Frederick Samuel Genton was born in Switzerland around1869 and arrived in England date unclear. By 1901 the Kelly’s Directory of Birmingham had listed the Genton & Kessler company as manufactures of all kinds of ship & railway lamps, fog horns and general ship fittings with their factory listed as the Bingley Works King Edward Place Birmingham UK that is listed in 1896 as being was owned and run by J E & H Player. Then in February 1905 it appears the partnership of Alfred F S Genton & Julius Rudolf Kessler was dissolved and Alfred F S Genton continued to carry on the business on his own. The company continued on managed by family members until 1961 when it ceased trading.A marine lamp made by a significant maker in Birmingham England in the early part of the 20th century. This item is now regarded as a collectors item. Brass lamp with 'Port' marking with 2 small chain hook locking mechanisms, and hinged lid. Clear glass with red lens filter. Fuel tank and wick burner removed. Stamped Seahorse GB trade mark No 54987flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Warmer base for tea pot or kettle, Brittania metal stand with spirit burner insert on four small legs with 2 upright side arms embossed pattern around base.domestic equipment, food storage & preservation, warmer

Steel upright cooker with flat bi-fold hinged lid, handles. Comprising cabinet, cooking utensils (egg slide, ladle, rolling pin), petrol operated burner belowRange 4range cooker, cooker

Tall flat iron with lid. Long Metal funnel attached to iron. Wooden handle and rounded guard under handle. Triangular shaped stand on four legs. Charcoal burner.Wallkin & co Salford/ Lanosdomestic items, irons

The Adlake Non Sweating Lamp "THE ADLAKE NON SWEATING LAMP CHICAGO" Adlake is a shortened name of the "Adams and Westlake" company. They began doing business in 1857 in Chicago. They manufactured railroad supplies and hardware in Chicago. In 1927, they moved to Elkhart, Indiana, where they remain in business today. The difference between "lamp" and "lantern" is that the lamp is meant to be hung on a post or a hook during use and the lantern is hand-held and only used when a person is directing traffic. It has four lenses- two amber and two blue. Adams & Westlake, also known as A&W or Adlake, became a dominant maker of short-globe lanterns and their #200, #250, and plain “Kero” (sometimes known as #300 or #400) models were sold by the thousands to the entire range of railroads. Short-globe lanterns came about because manufacturers figured out how to get a lantern to burn properly with a shorter combustion chamber, which allowed lanterns to be shorter and cheaper. Adams & Westlake began selling #200 Kero lanterns around 1921 and they sold well, the #250 Kero lantern was released in the mid 1920’s as an improvement over the #200 version, with a new burner design. FInally, around 1930 Adams & Westlake released models marked simply “Kero” but are sometimes known as the #300 or #400 models, which are further refinements. The #200, #250, and “Kero” models all look very similar in design and in fact they are all pretty much the same frame design with a couple of minor differences on the later “Kero” models. Short globe lanterns are still very easy to find because they were produced well into the mid 1900s. Adams & Westlake short globe lanterns can usually be dated by looking for a two-part date code on the bottom of the lantern. The first digit will be 1,2,3, or 4 followed by a dash and then a two digit number. Sample code: 2-39 would mean that the lantern was produced in the 2nd quarter (Apr-Jun) of 193Historic - Railways - Adlake Non Sweating LampAdlake Non Sweating Lamp made of metal and glass Metal with handle, painted black, oil Bullseye lens, 13 cm diameter, green Circular lens on opposite site, 5 cm diameter, clear Sliding panel provides access to burner Rain shield embossed 'THE ADLAKE NON SWEATING LAMP' 'LAMP MFG 7 RLY SUPPLIES LONDON''THE ADLAKE NON SWEATING LAMP' 'LAMP MFG 7 RLY SUPPLIES LONDON'puffing billy, adlake non sweating lamp

The Kerosene lamp was one of the most common oil lamps used and was manufactured until the 1980s. The Anchor Lamp design was used for marine purposes in the days of sailing ships when a ship at anchor or sailing in the dark was required to display a white light on the top of its main mast. The Anchor Lamp's top loop was for a rope to hoist it up the mast, and ropes through the two bottom loops to anchor it in place and prevent it from swaying. The light could be seen by ships up to 20 miles away due to the magnification of the Fresnel glass lens. This lamp in our collection has a design is similar to the early marine designs but its finish and materials resemble lamps made in the 20th century to represent the older ones. The etched "20" on its cover could represent the 20-mile distance the light could shine, and the "↑" Broad Arrows could represent a maritime navy ship. The lamp is an example of 19th and early 20th-century Anchor Lamps fueled by kerosene and used onboard ships when at anchor or sailing at night.Kerosene lamp; This Anchor Lamp design has a brass frame, a handle with a loop at the top, a rail around the base two opposing loops, and a kerosene burner and tank with ventilation holes around it. A clear glass Fresnel 360-degree lens covers the burner. It is an All Round design. The brand Anchor is inscribed on a plate fixed to its brass cover. An etched inscription on the cover includes the Broad Arrow symbol identifying government property.Engraved plaque: "Anchor" brand. Etched into the metal: "↑20↑"warrnambool, shipwreck coast, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, kerosene lamp, lighting, ship light, anchor lamp, marine technology, marine lamp, 20 mile light, broad anchor, oil lamp, whale oil lamp, ↑

Kerosene lamp, masthead mooring light. Glass lense with section missing, galvanised iron construction with brass fitting marked "Anchor". Base corroded out, burner missing and top corroded. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, kerosene lamp

Lamp, rectangular shaped ship's lamp with handle attached to curved top. Burner site on rectangular fuel tank with sloping edges. Glass partitions have metal cross protective guards.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, lamp, rectangular shaped ship's lamp, ship's lamp

Yellow painted metal kerosene lamp has cylindrical container for fuel at the base and an upright piece at the back with a tin circular reflector. On top of the fuel container is a wick-burner (no glass cover)V inside a "three-leaf clover" Made in Englandkerosene, lamp

A flat-wick lamp is a simple type of kerosene lamp, which burns kerosene drawn up through a wick by capillary action. A flat-wick lamp has a fuel tank (fount), with the lamp burner attached. Four prongs hold the glass chimney, which acts to prevent the flame from being blown out and enhances a thermally induced draft. The glass chimney needs a "throat," or slight constriction, to create the proper draft for complete combustion of the fuel; the draft carries more air (oxygen) past the flame, helping to produce a smokeless light which is brighter than that produced by an open flame. The lamp burner has a flat wick, usually made of cotton. The lower part of the wick dips into the fount and absorbs the kerosene; the top part of the wick extends out of the wick tube of the lamp burner, which includes a wick-adjustment mechanism. Adjusting how much of the wick extends above the wick tube controls the flame. The wick tube surrounds the wick, and ensures that the correct amount of air reaches the lamp burner. Adjustment is usually done by means of a small knob operating a toothed, metal sprocket bearing against the wick. A paraffin lamp with a green metal base to hold fuel with a side screw to adjust wick length. An opaque white glass shield sits in a metal frame attached to base* moorabbin, bentleigh, cheltenham, pioneers, early settlers, market gardeners, lights, lamps, paraffin, oil lamps

Kerosene lamp with cast iron base hand painted blue and green trim with red flowers and green petals. Amber glass font with brass collar & burner, complete with wick and glass chimney.Wick winder reads P&A Risdon MFG Co Danbury CT Made in USAlighting, kerosine & oil, kerosene, u4.705

Lmap was hung in the old Malmsbury HotelSpherical shaped lamp made of tin, decorative features on this part, which holds the kerosene. Protruding from either side are two kerosene burners (no glass with this lamp). Lamp has a large handle lamp, lantern, kerosene

No marksdecorative arts, incense, sculptural, birds, asian, burner

Water bottle, kidney shape, plastic, green colour with attached screw on lid, on on side and base raised lettering and numbering.On one side,”For Water only, do not apply to open flame or burner plate. Under neath, “ BMW 1989 (arrow up) 8465 - 66 - 086 - 8349”containers, water, military,

This Flying Angel lamp bracket was recovered from the wreck site of the steam sailing ship, "Loch Ard", which sank near Port Campbell, Victoria in 1878. It formed part of the ship's cargo. The 'flying angel' lamp was, for a time, displayed in the St Nicholas Seamen's Church at Flagstaff Hill. The design was very appropriate to the Missions to Seamen, being associated with the emblem of the 'flying angel' on the Missions' to Seamen's flag. Brief history of the Loch Ard: The vessel Loch Ard was constructed on the Clyde River in Scotland in 1873 for the prestigious Loch Line of colonial clipper ships, designed for the Australian run. She sailed from England on 1 March 1878 carrying 37 crew, 17 passengers and a diverse general cargo ranging from luxury items to bulk railway iron. On 1 June 1878, emerging from fog and hearing too late the sound of breakers against the tall limestone cliffs, the vessel struck the southern foot of Mutton Bird Island and sank in 23 metres of water. Of the fifty-four people on board only two survived, one young male crewman, Tom Pearce, and one young female passenger, Eva Carmichael. A century later, despite the pounding seas and the efforts of looters, the wreck site continued to provide ample evidence of the extraordinary range of goods being imported into the Colony of Victoria in the post-Gold Rush era. Flagstaff Hill divers in the 1970s reported finds of “Bottles of champagne, window panes, rolls of zinc, barrels of cement, iron rails, clocks, lead shot, corrugated iron, lead, marble, salad oil bottles, ink bottles, copper wire, gin bottles, rolls of carpet, floor tiles, copper rivets, gas light fittings, pocket knives, toys, crystal chandeliers, beer mugs, cutlery, candles sticks, wick scissors, cow bells, and sauce bottles.” The lamp bracket is significant for its connection with the wreck of the sailing ship, Loch Ard, in 1878. Flagstaff Hill’s collection of artefacts from LOCH ARD is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. It is significant for its association with the shipwreck, which is on the Victorian Heritage Register (VHR S417). The collection is significant because of the relationship between the objects, as together they have a high potential to interpret the story of the LOCH ARD. The LOCH ARD collection is archaeologically significant as the remains of a large international passenger and cargo ship. The LOCH ARD collection is historically significant for representing aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The collection is also historically significant for its association with the LOCH ARD, which was one of the worst and best known shipwrecks in Victoria’s history. Gas lamp, brass, single burner, wall-mounting bracket, delicately crafted. Ornate decoration features bust of an angel with up-swept wings, or 'flying angel'. Recovered from the wreck of the Loch Ard.Noneflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, loch line, loch ard, captain gibbs, eva carmichael, tom pearce, glenample station, mutton bird island, loch ard gorge, lamp fitting, shipwreck artifact, 1878, shipwreck cargo, household effects, 19th century lighting, angel lamp, loch ard lamp, angelic lamp, lighting at sea, marine technology, ship's lighting, flying angel, gas lamp, maritime archaeology, port campbell

Carbide Bicycle lamp, with locking fixing attachment, reflector, glass and burner. Has red and blue side light. Printed on carbide bowl "Miller's Regalia British Made" Switch and carbide filler on top.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

In 1832 William McGeoch & Co., Ltd was established, by William McGeoch senior at 113 Argyle St Glasgow as hardware merchants and exporters, and later were manufacturers of lamps and electrical fittings for ship, railway and domestic use. In the 1900s the company had expanded and had offices at 28 West Campbell Street Glasgow with a factory and warehouse located at the Warwick Works, 46 Coventry Rd, Birmingham. In 1922 the company had expanded and were employing 400 to 500 people. William seniors three sons had joined their father in establishing the business around 1888. The business was run by William McGeoch senior with Williams three sons Alexander, William and Andrew also taking an active part in the day to day running of the company. The company had expanded to such a degree that they were now manufacturing a variety of ships' hardware. This included metal cabin furnishings, signal lamps, ships' oil and candle lamps, motor lamps, switches, switchboards, electrical accessories and fittings. In 1982 William McGeoch & Co., Ltd was acquired by Bowthorpe Holdings Ltd.A lamp made by a significant manufacturer of marine equipment that made fittings for many famous ships including the Titanic.Marine oil Lamp with glass panels. Front panel missing. Access through glass panel door at side flat metal back. Metal fuel reservoir and no burner. Metal rounded chimney on top. Embossed McGeogh Maker Glasgowwarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, lamp, ships lamp, wm mc geoch ltd, hardware merchants, ships outfitters

Coloured slide transparency. Image is of a male seated at a bench wearing a white lab coat. He is holding a white cup over a Bunsen burner. There are many glass jars, beakers and test tubes on the bench.Kodachrome Transparencyslide, bendigo, bendigo institute of technology

Given to Nell (Helen) Mitchell, daughter of Charlie Mitchell, and her husband John Macpherson Smith as a wedding gift from he emloyees of Cave Hill, Lilydale 19 June 1935.Historic significance related to Cave Hill Quarry, a major enterprise in Lilydale which has existed since the mid 1800s and was founded by David Mitchell, father of Dame Nellie Melba (opera singer). Cave Hill Quarry was a major employer in the area. The Museum also holds a humidifier made by the engineer at Cave Hill Quarry for Dame Nellie Melba as a gift. Significance also related to David Mitchell and Dame Nellie Melba and Mitchell family. Nell Mitchell was David Mitchell's grand-daughter and Nellie Melba's niece (Charlie Mitchell Melba's brother)..1 Electroplated nickel silver teapot with wicker handle. Hinged lid, scalloped rim, four feet and an acanthus leaf spout. .2 Electroplated nickel silver tipping stand .3 Oil burnerOn lid: Presented to Miss Nell Mitchell on the occasion of her marriage to Mr John Macpherson Smith from the employees of Cave Hill. Lillydale. June 19 - 1935 On bottom: D/ TN/- 10Y10Y? Dunklings Melbourne EPNS 5489 Made in Englandnell (helen) mitchell, john macpherson smith, cave hill lilydale, weddings

Lamp base, metal with removable lamp-holder. Label attached R 12 x A "ORAC" inscribed on burner control. Removable Lamp cover. Filler cap engraved "Wick Patent 19267/24 Trimmer" .flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village