Instruction or Training or Manual - 16 A4 pages, stapled in the top left hand corner, titled "Yarra Trams "W" class Tram Drivers Training Course" dated 16/2/2004. Gives introduction, description, trolley poles or pantographs, boarding and alighting, pre-inspection, run out, controller, data logger/event recorder, braking, auto points, fault finding, braking, city circle trams.trams, tramways, instructions, w class, city circle, drivers, manual

Form - titled "Work Record for Senior Drivers or Conductors" completed by E. Benson on Saturday April 10, 1926, numeral 1114, giving details of shift work, for table 40, cars 121 and 135 working from South Melbourne line. Has space for Office Use, time and remarks. Has not been completed. Has extensive areas for special or altered running, travelling time, student crews, time lost bytrams, tramways, crews, south melbourne, rosters, table cards, forms

This engine was a Commonwealth Aircraft Corporation (CAC) build, and had been upgraded to 92 specification at some time. This engine as acquired, was completely seized and great difficulty was encountered in dismantling it. The pistons in Nos 1, 13, 3, 2 and 5 had "grown" into the cylinder bores requiring some unorthodox methods to remove them. The cylinder barrels have been brought up to a reasonable standard, those beyond repair were replaced from stock. After getting various parts from the US, this engine was eventually brought up to running order.The Pratt & Whitney R 1830 is a double row 14 cylinder air cooled radial engine with a capacity of 1830 cubic inches, (30 litres), developing some 1200 horsepower at a maximum 2700 rpm.Engine Number 54828

Retyped Instruction - MMTB - C No. 388, signed by A. Simpson District Traffic Superintendent, NS&F, dated 8/7/1925, giving instructions for trams crossing William St lines and in particular Bourke and William St. Notes the duties of the Conductors, drivers, flagmen and policemen. Two copies held - one on a single sheet and one copy on two sheets of paper. Would appear to have been retyped from the original document.trams, tramways, cable trams, essendon depot, william st, instructions, flagmen, bourke st, conductors, signalmen

Completed by Glen Stuart in 2007 and published by PMH&PS in October 2008, when Glen spoke on the subject at a PMH&PS meeting"My Time At Engine Works" by Glen Stuart. Yellow paperback 48 pages illustrated. A memoir of Glen's working life, building marine engines.industry - manufacturing, transport - shipping, commonwealth engine works, glen stuart

Instruction - 27 A4 sheets, photocopied with multiple staple holes in the top left hand corner, titled "Instructions to Drivers in Electric Tram Operation" with a Metropolitan Transit Authority heading. Does a Question and Answer format. Undated, possibly c1985. Written for W class trams. 3652.1 - duplicated 20 Foolscap sheets stapled with "Tram car braking on Greasy Rails" on front cover - see Reg Item 2913. Printed most likely by the MMTB - mid 1960's.3652.1 - has "0466' in blue ink on rear sheet.trams, tramways, training, drivers, instructions, w class, mta, mmtb

Book - 52 pages, side stapled book within grey Rexene covers. Titled "Melbourne and Metropolitan Tramways Board /Electric System /Instructions to Drivers in Electric Car Operation" Dated 1948. Printed by Regent Press Pty Ltd, 457 Plenty Road, Preston. Provides in a Q & A format, instructions to drivers in electric car operation, sketches of various types of controllers, braking system description, emergency braking, safety cars, manual lap valves, the air system, an addendum page 26A dated 22/10/1952 about emergency braking for four motor cars, hand braking, lighting system and general duties, and what to do if the tram breaks down. On pages 44 to 48 - a long list of don'ts, notes regarding the traffic code and reference index for defects. Pages 1 and 2 have been removed along a perforated line - would have been an acknowledgement sheet. Book has No. 4727 on top of page 3. See Reg Item 6115 for another copy.Has pencil notes on inside cover and pages for controllers on inside of rear page. Some questions have been highlighted by a red pencil.trams, tramways, mmtb, drivers, training, instructions, motormen

These log books would have been kept for each aircraft at the air stationHard back bound book 305 pages with columns. sections titled Chronological Log, Repair Log, Modification LogAero Engine Log Book, Type of engine-Cheetah BHP. 340. Series or Mk No. IX Makers number AS34299, A Number DG750, A 143950log book, aero engine log, repair log, anson, cheetah

The City of Melbourne issued a License or Licence for Melbourne Tramway and Omnibus Co (MTOCo) drivers (gripmen) or conductors under their Hackney Carriage by-law No. 110. The cost was 5/- or five schillings. This practice ceased during 1917. 1 - License No. 179, was issued to George A Barrett of Port Melbourne who was a tram conductor on the 16/1/1914. The document is signed by John Clayton as Town Clerk. 2 - License No. 58, issued to Herb S Browne of Glenferrie, tram conductor on 14/1/1917 and signed by T Geo Ellery Town Clerk.Demonstrates a license issued by the City of Melbourne under their Hackney Carriage By-LawDocument - set of two - pink paper License No. 179 for 1914 and No. 58 for 1917Hand written name and datetramways, mtoco, license, licence, conductors, city of melbourne

Set of two pamphlets provide safety messages to passengers and motorists. .1 - tram hanging pamphlet with a hand at the top to be hung around the hand rails inside trams, printed on gloss paper car titled "Beware of Sudden Stops Hold on" - has messages about tram travel, stopping distances and "Beware the Rhino" .2 - folded pamphlet printed on gloss card, titled "Drivers Beware", with the Rhino logos, driving on yellow lines and doing turns in front of trams. Produced by PTV and Yarra Trams c 2015.trams, tramways, yarra trams, passengers, safety, rhinos

Document - 9 A4 pages, stapled in the top left hand corner, photocopied double sided - titled "Instructions to Drivers on Z class trams". Provides information on the operation, faults, defects, line breakers, track brake, lights, points, PA, Safety, Hot Weather, design changes on Z5, notes on the Z3 tram, power limiting switch, overspeed, faults -when it will not drive. Dated 1/5/1989. Original copy replaced 1/7/2020 with a better copy from Keith Kings.trams, tramways, the met, drivers, driver training, instructions, ptc, z class

Saw Bench - New Record Saw Bench Timber framed with steel wheels, belt driven saw blade powered by a Rosbery internal combustion engine. The Rosebery Engine No C28437 R.P.M 800 H.P. 6 Manufactured By Westinghouse Rosebery Pty.Ltd. Sydney Rosebery Engine Works Ltd began as the engine and pump manufacturing division of Buzacott & Company, and in 1923 became an incorporated company. In 1935, Westinghouse gave Rosebery Engine Works the right to manufacture and sell nearly all Westinghouse products. The name of the company then changed to Westinghouse Rosebery Ltd From the late nineteenth century, petrol engines gradually supplanted steam engines for running a wide range of machines, and in turn petrol engines were largely supplanted by electric motors. The Champion was a successful small petrol engine made by the large Sydney company, Westinghouse Rosebery, based on the American-designed Fuller and Johnson engine. With hopper cooling and a fuel tank between the skids, and weighing only 240 pounds (109 kg), it was easy to mount on wheeled transport, making the Champion a self-contained mobile source of power. Engines of this type were used in rural areas for driving chaff cutters, small saw benches, pumps and orchard sprayers. These engines were also commonly used in both rural and urban areas for powering concrete mixers. Both Westinghouse Rosebery in NSW and Toowoomba Foundry in Queensland made these engines in large quantities, beginning in the 1920s when tariff protection made local manufacturing viable. The production of small petrol engines continued in Australia until the 1970s, when reduced tariff protection led to increased competition from cheaper imported engines. Historic - Industrial Timber working - belt driven saw blade powered by a Rosbery internal combustion engine. Timber framed with steel wheels, belt driven saw blade powered by a Rosbery internal combustion engine. The Rosebery Engine No c28437 R.P.M 800 H.P. 6 Manufactured By Westinghouse Rosebery Pty.ltd. Sydneysaw bench, puffing billy, new record, internal combustioin, westinghouse rosebery pty.ltd., rosebery pty, internal combustion engine.

Six cylinder Bell 47G - 3B1 Piston Engine72011 Rev-AT Equip - 8ZJ2, AVCO Lycomingengine, sioux, bell 47g - 3b1

Coloured photo of Diesel Engine in Blackburn Cool Stores.blackburn cool store, diesel engines

Coloured photo of Diesel Engine in Blackburn Cool Stores.blackburn cool store

Pamphlet for tramcars, sheet of paper folded into pocket size, 12 folds, printed on gloss paper with black and red colours titled "Tram Drivers' Guide RT 5", providing g a map for the Route 5 Malvern Bourke Road from Burke Road to St Kilda Road, showing notes for both directions, compulsory stops, facilities and features. On the reverse side, has notes regarding classes of tram, information about accidents and telephone numbers. Dated August 1990. 2nd copy added 11-12-17 from Donation of Ron Scholten.trams, tramways, ptc, malvern burke rd, accidents, tram drivers, map

This photograph was printed from a glass negative held in the Society's picture collection. The original glass negative is part of a set donated to the Society by Ian McKenzie, a professional photographer in Kew. Stationary engine, ca. 1900-ca. 1920. An early stationary engine that might have been used to drive a piece of immobile equipment, such as a pump, generator, or mill or factory machinery. stationery engine, glass negatives

Albert Richardson's father was G. Richardson, the Engine Driver at the Fortuna Hustler's Mine. Maroon hard cover booklet. On front cover on affixed paper: 'Wages earned at Fortuna Hustler's Mine, Aug 1906 - Jan 1907'. Inside front cover: George A.G. Richardson, off Revere St.' and 'started to work at Fortuna Hustlers Feb 25th 1899 sh 1907'. Child's pencil drawing of a man on front page. Long Gully Bendigo written in pencil across front page. Royal Historical Society of Victoria, Bendigo Branch, stamp. Example: first entries in Time Book for 9/06 (August 1906) is L. Phillips, Manager, no hourly rate given; G. Richardson, Engine Driver, 8/4d per day; T. Coates Engine Driver, 8/4d; H. (?) Kelly, Engine Driver 8/4d; T. Berryman, blacksmith 10/-. Names of miners, occupation, days worked, total number of days worked, rate per day and total amount paid are listed in the Time Book. George A. Richardson, off Revere St.fortuna hustler's mine, gold mining, bendigo goldfield, a. richardson, engine driver, wages book, wage rates, 1906, 1907

Henry Sutton is a talented world-wide accepted inventor with inventions relating to the telephone, photography, wireless, cars, motorcycles, and bicycles as well as many more inventions. Henry was also one of four brothers that ran the Sutton's Music Store after the death of their Father Richard Sutton. Henry Sutton taught Applied Electricity at the Ballarat School of Mines in 1883 to 1886.Patent document relating to the Combustion Engine of Henry Sutton in 1899patent, victoria, henry sutton, combustion engine, c.n. dalton

Henry Sutton is a talented world-wide accepted inventor with inventions relating to the telephone, photography, wireless, cars, motorcycles, and bicycles as well as many more inventions. Henry was also one of four brothers that ran the Sutton's Music Store after the death of their Father Richard Sutton. Henry Sutton taught Applied Electricity at the Ballarat School of Mines in 1883 to 1886.A3 sized document relating to the patent of the "Combustion Engine" in NSWhenry sutton, patent, combustion engine, nsw, new south wales

General electric turboshaft engine fitted to Bell UH1 helicopter.aircraft engine, get58

Black and white photo of Steam Engine at Mitcham Railway Station.mitcham railway station