Rocket equipment which has been used in various lifeboat and rocket stations on the Victorian Coast. It is unclear if this is the original rocket equipment from Port Campbell. This equipment, if not original has been used in rescue operations and is identical to the equipment that has been in use at Port Campbell from C.1890 onwards.Metal, brass and timber tripod structure with a channel or trough to support the rocket. It has a pendulum and dial to measure the height trajectory. Very long wooden box with hinged lid painted a green-grey colour with four brass hinges and two rusted metal hooks.

Rocket equipment which has been used in various lifeboat and rocket stations on the Victorian Coast. It is unclear if this is the original rocket equipment from Port Campbell. This equipment, if not original has been used in rescue operations and is identical to the equipment that was in use at Port Campbell from C.1890 onwardsTwo cylindrical rockets made of base metal with orange painted wooden heads. Three long cedar, wooden sticks (octaganal) that attach to the rockets. They have spring clips and a section of metal and a sheath to protect the wood from fire and with grooves for the rope. One rocket is attached firmly to a stick. A long length of cotton/linen (?) rope is attached to one of the rocketsYes

This rocket equipment has been used in various lifeboat and rocket stations on Victorian Coast. It is unclear if this is the original rocket equipment from Port Campbell. This equipment, if not original to the site, has been used in rescue operations and is identical to the equipment that was in use at Port Campbell from C.1890 onwardsTwo canvas lifejackets, one is filled with cotton or silk and the other with cork. The jackets are sewn in sections that hold either the cork or the cotton/silk. One of the lifejackets has a separate strap and brass eyelets and buckles.

This rocket equipment has been used in various lifeboat and rocket stations on Victorian Coast. It is unclear if this is the original rocket equipment from Port Campbell. This equipment, if not original to the site, has been used in rescue operations and is identical to the equipment that was in use at Port Campbell from C.1890 onwardsTwo rope ladders, identical in format and length. The rungs are made from another type of material.

This rocket equipment has been used in various lifeboat and rocket stations on Victorian Coast. It is unclear if this is the original rocket equipment from Port Campbell. This equipment, if not original to the site, has been used in rescue operations and is identical to the equipment that was in use at Port Campbell from C.1890 onwardsFour rope strops, three are of equal length. Lengths of rope spliced or joined to form a circle of approx. 100cm diameter. The long rope is triple laid rope and the three shorter ropes are made of multiple small strings (approx.40) bound together. Use is yet to be determined.

This rocket equipment has been used in various lifeboat and rocket stations on Victorian Coast. It is unclear if this is the original rocket equipment from Port Campbell. This equipment, if not original to the site, has been used in rescue operations and is identical to the equipment that was in use at Port Campbell from C.1890 onwardsRope handled timber box with faking pins. The Rocket Line was attached to the rocket and fired over the ship in distress. The light rocket line, was folded in such a way that it paid out easily as the rocket shot through the air.

This rocket equipment has been used in various lifeboat and rocket stations on Victorian Coast. It is unclear if this is the original rocket equipment from Port Campbell. This equipment, if not original to the site, has been used in rescue operations and is identical to the equipment that was in use at Port Campbell from C.1890 onwardsEach of the five anchors have an iron ring (2 large, 1 medium, 2 small) to which are attached 5 iron hooks. Medium has 4 hooks.Each has an iron ring 2 large, 2 small to which is attached iron hooks.

This rocket equipment has been used in various lifeboat and rocket stations on Victorian Coast. It is unclear if this is the original rocket equipment from Port Campbell. This equipment, if not original to the site, has been used in rescue operations and is identical to the equipment that was in use at Port Campbell from C.1890 onwardsBody of rescue stretcher is canvas and timber slats. Straps of canvas webbing attached to sides. Rope loops at either end, rope runs along the length of stretcher. Opens out to secure patient.

This rocket equipment has been used in various lifeboat and rocket stations on Victorian Coast. It is unclear if this is the original rocket equipment from Port Campbell. This equipment, if not original to the site, has been used in rescue operations and is identical to the equipment that was in use at Port Campbell from C.1890 onwardsEach of the six iron pegs has a spike on one end and eyelet on the other.

This rocket equipment has been used in various lifeboat and rocket stations on Victorian Coast. It is unclear if this is the original rocket equipment from Port Campbell. This equipment, if not original to the site, has been used in rescue operations and is identical to the equipment that was in use at Port Campbell from C.1890 onwardsRope, 1cm light line

This rocket equipment has been used in various lifeboat and rocket stations on Victorian Coast. It is unclear if this is the original rocket equipment from Port Campbell. This equipment, if not original to the site, has been used in rescue operations and is identical to the equipment that was in use at Port Campbell from C.1890 onwardsRectangular box with fitted lid. All wood. Two rope handles at each end. Inscribed on lid -"Lights Illuminating Wrecks. Mark-IV 3 . 4/7/1910"Inscribed on lid -"Lights Illuminating Wrecks. Mark-IV 3 . 4/7/1910"

Rocket equipment which has been used in various lifeboat and rocket stations on the Victorian Coast. It is unclear if this is the original rocket equipment from Port Campbell. This equipment, if not original has been used in rescue operations and is identical to the equipment that has been in use at Port Campbell from C.1890 onwards.Rope, 1cm light line in wooden box. Wooden rectangular box with lid held by 3 steel hinges. Red painted box, weathered.

Rocket equipment which has been used in various lifeboat and rocket stations on the Victorian Coast. It is unclear if this is the original rocket equipment from Port Campbell. This equipment, if not original has been used in rescue operations and is identical to the equipment that has been in use at Port Campbell from C.1890 onwards.Rope roller, welded, cliff anchor. Steel A frame with eye at top of the A frame. Spindle on bottom for rope to move through.

The Wodonga Historical Society Haeusler Collection provides invaluable insight into life in late nineteenth and early twentieth century north east Victoria. The collection comprises manuscripts, personal artefacts used by the Haeusler family on their farm in Wodonga, and a set of glass negatives which offer a unique visual snapshot of the domestic and social lives of the Haeusler family and local Wodonga community. The Haeusler family migrated from Prussia (Germany) to South Australia in the 1840s and 1850s, before purchasing 100 acres of Crown Land made available under the Victorian Lands Act 1862 (also known as ‘Duffy’s Land Act’) in 1866 in what is now Wodonga West. The Haeusler family were one of several German families to migrate from South Australia to Wodonga in the 1860s. The Schuster family were also of German migrant background. Johannes Edward Schuster was born in Hoyles Plains, South Australia and with his wife Johanna and young family moved to Victoria circa 1882. He took up farming land in Wodonga West. The St John’s Lutheran Church Sunday school hall was erected from part of the proceeds of the sale of some 41 acres of land at Wodonga West, which had been bequeathed to the Wodonga congregation by the late Johannes Edward Schuster. This land was the original home site of the Schuster family on arrival from South Australia. Shearing - Although the first mechanised sheep shearing machine was created by James Higham, from Melbourne in 1868, the use of blade shears were more common well into the early 20th century. Pastoralists on smaller holdings continued to either shear their own sheep or employ blade shearers rather than outlay the cost of machines. In large sheds, professional shearers worked as they travelled the country. They would earn around 17 to 20 shillings per day in the early days of the wool industry. However mechanisation continued and by 1915 most sheep shearing sheds in Australia contained sheep shearing machines. The original machines were powered by steam and later combustion engines were used. This digital image was produced from one of the glass negatives that form part of the collection, probably taken by Louis Haeusler (b.1887) with the photographic equipment in the Wodonga Historical Society Haeusler Collection.This item is unique and has well documented provenance and a known owner. It forms part of a significant and representative historical collection which reflects the local history of Wodonga. It contributes to our understanding of domestic and family life in early twentieth century Wodonga, as well as providing interpretative capacity for themes including local history and social history.Digital image created from the Haeusler Glass negative collection. Harry Schuster shearing sheep using blade shears. wodonga pioneers, haeusler family, glass negatives, dry plate photography, blade shearing, schuster family

Patrick Toole was born in Corowa on 7 September 1913. In the early 1930s the family moved to Wodonga. Pat became an apprentice mechanic with Bill Dobbie and became a partner in 1936. Patrick Toole took over business in his own right on 23 August 1939. Toole’s Motors also ran a car and truck agency, a towing and crane depot, as well as a small disposal section. After breaking his leg in 1963, Pat extended the disposals business and by 1965 it was running as Wodonga Disposals and later, Toole’s Disposals. At their peak Toole’s employed 70 people across their various businesses including the garage, wreckers, towing businesses, a storage shed at Bandiana and the Disposal Store. Pat died in Wodonga on 10 November 1976 and the Disposals Store was taken over by his twin sons, Frank and Bill. His other sons, Pat and Jim ran the North Eastern Truck Wreckers. Tooles Disposals acquired most of their stock from Government auctions and also became licensed second hand dealers. They sold a wide range of military and non-military equipment from clothing to footwear and equipment for cooking and camping. They also shipped scrap metal to Japan and sourced uniforms and other items from Japan and East European countries. The business continued on the corner of High Street and Stanley Street for over 70 years, but the Toole family decided to sell the building in 2009. The building was eventually sold to a local business consortium in 2010. Toole’s continued to operate until May 2011. Thee building was demolished in 2013. Bill Toole continued Toole’s Disposals as an online business with numerous Australian and international clients.These images document an important and long standing business in Wodonga.A collection of images and a business card for the company of Tooles Garage and Disposals in Wodonga. Images depict the business at various stages in its development over more than 70 years.Photo 1 Beneath image - 1929 W. DOBBIE MOTOR & GENERAL ENGINEER / Con Lindsay, Alec Padgett, Bill Dobbie, Pat Toole Photo 2 Beneath image - 1940 A. L. TOOLE MOTOR & GENERAL ENGINEER / Fay Fulford, Gerry Nelder, Mick Presnell, Pat Toole Photo 3 On building - TOOLES MOTORS est. 1939/ TOOLES MOTORS PTY. LTD./ DISPOSALS/ DISPOSALS AT CITY PRICESt Photo 4 On sign - TOOLES DISPOSALS Photo 5 Business cardwodonga businesses, toole's disposals, businesses high street wodonga

North Deborah Mine in Eve Street, Bendigo, operated between 1937 and 1954. In that time it produced 128,000 ounces of gold.Black and white photograph of the North Deborah Mine, showing the poppet head, mullock heap to the left, man at the end of railway at the first level, does not show cables from the engine house to the wheels on top of the poppet, water tank at the side of the engine house, farm style corner of a fence at left of photo, small shed housing a pump for water, right foreground is a dam for water waiting to be converted to steam to operate the cable winder.mining, surface equipment, north deborah mine

Strathewen Public Hall, social and spiritual centre was later lost in the Black Saturday fires 2009. The Strathewen Community decided a community hall was needed in 1901. In 1902 locals built the hall with messmate trees. It was located on the Cottlesbridge-Strathewen Road. The first function was a Grand concert and Balll attended by about 120 people. Several denominations held Church services and Sunday School services in the Hall. It survived several bushfires until after this photo was taken when it was destroyed in Black Saturday, 9 February 2009. Published: Nillumbik Now and Then /​ Marguerite Marshall 2008; photographs Alan King with Marguerite Marshall.; p89 Strathewen was settled late, largely because it was difficult to access.1 Early selectors found it a struggle to survive. They had to do everything themselves, from felling trees for buildings, to taking produce to market along bush tracks that they had helped cut. Small dairy farms were typical but fruit became the district’s prime produce. The first settlers east of Arthurs Creek were brothers John and Duncan Smith whose station Glen-Ard was probably operated as a sheep run. Other early settlers were the Mann family, who were to donate land for the hall, provide postal services and John Mann was an Eltham Shire councillor from 1916 to 1919.2 In 1873 James Mann, his wife Jane and their six children, settled on 207 acres (83.7) (Lang Fauld Farm) on both sides of Eagles Nest Road, from the foot of Mount Sugarloaf to the bank of the Arthurs Creek. In 1883 James took up another selection on Chads Creek. It was very hard work and at times he was well behind with his rent. However the family had a good social life, attending the Primitive Methodist Church at the Arthurs Creek Township and on New Year’s Eve throwing a party for all the locals. By 1874 James Mann’s younger brother, John, selected 311 acres (125.8ha) between Eagles Nest Road and upper Arthurs Creek. He called it Carseburn after his home parish in Scotland. Tragically in 1875 John drowned in the Yarra River, at Richmond.3 John Mann’s oldest son, also John, later purchased Duncan Smith’s land, which he named Violet Glen. He was to give one acre (0.4ha) of this land for the Strathewen Hall site. A Mann family diary written at Carseburn in 1897, tells how the district’s name was selected. Strathewen is derived from ‘strath’ meaning ‘broad mountain valley’ and from the name of Ewen H. Cameron, the local parliamentarian for almost 40 years. ‘George Brain came around to get a petition signed to get a post office up here and we had to vote for a name—Strathewen, Glen-Ard, or Headcorie’.4 It was at Carseburn that a public meeting in 1901, decided to build the Strathewen Hall on the Cottlesbridge-Strathewen Road. In 1902 the locals built the hall with messmate trees. The first function was a Grand Concert and Ball attended by around 120 people and several Protestant denominations took turns to hold church services and Sunday School there. Fortunately the hall has survived bushfires to be the town’s spiritual and social centre.5 The area continued to develop and in 1909 a post office operated somewhere at Strathewen and from around 1916 at Carseburn.6 It was not until 1914 that land was bought to establish the Strathewen State School on School Ridge Road. The residents paid £100 to build it on two acres (0.8 ha) while the Education Department contributed £30 and leased the building annually for £1. When teacher Miss Mary Golding opened the school in 1917, it had no equipment.7 But in 1921 the Education Department provided desks and a hexagonal shelter shed (now a rare style in Victoria) and took control in 1925.8 By 1917 Strathewen was booming.9 George Apted had built a coolstore in 1916, and local orchardists bought storage space until the 1950s. This allowed the area to supply the market in and out of season. Guesthouses catered for growing tourism. In the mid 1920s Mrs Eleanor Sparkes built the guest-house Singing Waters, which operated through the 1930s. Her daughter Mrs Vera McKimmie, ran it until the 1950s and the house remains in Chads Creek Road. In the Great Depression land was cleared for timber to be sold as firewood and there was small scale sawmilling. However the orchard industry diminished for several reasons including the 1939 bushfires and rapid changes in production methods. Today the Apteds still operate an orchard and farm at Glen-Ard, which straddles the border between Strathewen and Arthurs Creek. It includes the southern part of Duncan Smith’s original Glen-Ard selection.This collection of almost 130 photos about places and people within the Shire of Nillumbik, an urban and rural municipality in Melbourne's north, contributes to an understanding of the history of the Shire. Published in 2008 immediately prior to the Black Saturday bushfires of February 7, 2009, it documents sites that were impacted, and in some cases destroyed by the fires. It includes photographs taken especially for the publication, creating a unique time capsule representing the Shire in the early 21st century. It remains the most recent comprehenesive publication devoted to the Shire's history connecting local residents to the past. nillumbik now and then (marshall-king) collection, strathewan public hall

The number of cattle in this photo suggests that it was a small holding, at the beginning of the dairy industry in Bacchus Marsh. This industry became a major source of employment in Bacchus Marsh. By the early twentieth century, the Bacchus Marsh region was a significant contributor to the dairy industry in Australia. Small sepia unframed photograph on card with gold border framing photograph. Housed in the album, 'Photographs of Bacchus Marsh and District in 1883 by Stevenson and McNicoll'. This is a photo of a dairy farm in an unknown location in the Bacchus Marsh district. It has been taken from an elevation looking down at the farm. On the left, the roadside can be seen running alongside a stream or river which is fenced off by a line of trees and a post and rail fence. Parked on the road outside the farmhouse is a wagon which is unhitched. The wagon has a white rooftop and on the side can be seen a professional logo, details unclear. This wagon is most likely the wagon used by the photographers to access outlying properties with their photographic equipment. The farmhouse itself faces the road with side doors giving onto the yard. The roof is partially covered by new slates, possibly slate covering bark. Six milking sheds of post-and-rail construction adjoin the farm yard. In the first and fourth stalls (l to r) the farmer and his wife can be seen seated, miking cows. The rest of the herd are awaiting milking in the yard which also has a post-and-rail fence. A bull of milking shorthorn breed stands outside the fence. The milking herd itself is of various breeds; Herefords, roan shorthorn and roan and white shorthorns can be identified. On the right is a shed of rough-hewn boards and a shingle roof. In the yard at the back of the house stands a cart or dray. On the front: Stevenson & McNicoll. Photo. 108 Elizabeth St. Melbourne. COPIES CAN BE OBTAINED AT ANY TIME. On the back: LIGHT & TRUTH inscribed on a banner surmounted by a representation of the rising sun. Copies of this Portrait can be had at any time by sending the Name and Post Office Money Order or Stamps for the amount of order to STEVENSON & McNICOLL LATE BENSON & STEVENSON, Photographers. 108 Elizabeth Street, MELBOURNE. dairy farms, stevenson and mcnicoll 1883 photographs of bacchus marsh and district

Black and white photograph. Mine winder house, poppet head, ore bins, chimney and shed. Residences adjacent to mine and streets. Poppet heads visible in far background. surface equipment, surface site, bendigo, mines and mining, mine, mining, poppet head, transport, dray, mining landscape, landscape

Black and white photograph. Poppet head with squared timber legs, two stage landings. Wooden storage box and two vertical steel bins. Overhead tramway to mullock dump. Plateman's shed on first landing. Mullock dump. Shed. Inscriptions: on back - 'R Stanistreet', 'Hercules'. mining, surface equipment, poppet head, bendigo, mines and mining, mines, mine, mining, mining shed, poppet head

Black and white photo: industrial buildings with open tank and drums in foreground. Wooden building and ramp in middle ground. Chimney and shedding ( ? ) in background. BHS has other photo of this in its collection. Possibly Deeble's pyrites? James Lerk identified this as being Spargo's Pyrites - the picture appears in 'Bendigo's Gold Story' by Ralph W Birrell and James A Lerk.mining, surface equipment, spargo's pyrites, bendigo, mines and mining, mining equipment, equipment, gold

Drawing - original dyeline print - folded into 16, showing dimensions and layout of the wooden troughing in 16 different sheds at the depot - e.g. old and new Malvern. Prepared July 1934. Drawing Number 06739A Revision A Feb. 1964trams, tramways, depot, overhead, trolley wire, trolley poles, electrical equipment

Instruction - 7 pages - duplicated foolscap sheets - headed "MMTB Engineering Department - Workshops and Running Shed Branch" - titled "Safety Precautions in Workshop" Details driving of tramcars in depot, procedures, in yards, tradesmen and safety procedures, controllers, pitmen, jacking of tram bodies, safety rules, safety equipment, general safety precautions, cleaning of depot. Dated May 1970.trams, tramways, depot, safety, workshops, pitmen, instructions, procedures

Instruction - 5 pages - duplicated foolscap sheets - headed "MMTB Engineering Department - Workshops and Running Shed Branch" - titled "Duties of Electrical Mechanics - Runningsheds" Details electrical work to be done on tramcars at the 100 hours service; trolley pole, electrical equipment, controllers, switches, resistance boxes, line breakers, RC units, motors, governor, compressor, lighting, buzzers, door engines, wipers, brake cylinders and general body eg handrails. Dated May 1970.trams, tramways, depot, safety, workshops, electrical equipment, instructions, procedures

Instruction - 3 pages - duplicated foolscap sheets - headed "MMTB Engineering Department - Workshops and Running Shed Branch" - titled ""RC2 and EE RC1 Controller Maintenance - Electrical Mechanics Procedure" Details electrical work to be done on the rostered day in for RC1 and EE.RC1 controllers, safety, checking, when to replaced and additional work to be done on the 4th rostered day-in service. Dated May 1970.trams, tramways, depot, safety, workshops, electrical equipment, instructions, procedures, controllers

Instruction - 3 pages - duplicated foolscap sheets - headed "MMTB Engineering Department - Workshops and Running Shed Branch" - titled "K35 JJ, K35 AA2 Controller Maintenance - Electrical Mechanics Procedure". Details electrical work to be done on the rostered day in for K35 JJ and K35 AA controllers, safety, checking, when to replaced and additional work to be done on the 4th rostered day-in service. Dated May 1970.trams, tramways, depot, safety, workshops, electrical equipment, instructions, procedures, controllers

Instruction - 4 pages - duplicated foolscap sheets - headed "MMTB Engineering Department - Workshops and Running Shed Branch" - titled "EECK1 (Clyde) Controller Maintenance - Electrical Mechanics Procedure" Details electrical work to be done on the rostered day in for EECK1 (Clyde) controllers, safety, checking, when to replaced and additional work to be done on the 4th and 12th rostered day-in service. Dated May 1970.trams, tramways, depot, safety, workshops, electrical equipment, instructions, procedures, controllers

Instruction - 3 pages - duplicated foolscap sheets - headed "MMTB Engineering Department - Workshops and Running Shed Branch" - titled "RC1 and RC2 remote control unit boxes - Electrical Mechanics Procedure" Details electrical work to be done on the rostered day in for RC1 and RC2 remote control unit boxes maintenance, checks, adjustments, safety, testing and closing the boxes. Dated May 1970.trams, tramways, depot, safety, workshops, electrical equipment, instructions, procedures, controllers

Instruction - 2 pages - duplicated foolscap sheets - headed "MMTB Engineering Department - Workshops and Running Shed Branch" - titled "Line Breakers GE and EE type - Electrical Mechanics Procedure" Details electrical work to be done on the rostered day in for GE and EE type line breakers, maintenance, checks, adjustments, safety, testing and closing the boxes. Dated May 1970.trams, tramways, depot, safety, workshops, electrical equipment, instructions, procedures, controllers

Instruction - 1 pages - duplicated foolscap sheets - headed "MMTB Engineering Department - Workshops and Running Shed Branch" - titled "K35JJ, K35 AA2, RC1, RC2, EECK1 (Clyde) controller maintenance - Tradesman's assistant procedures" Details electrical work to be done on the rostered day in for the work to be carried out assisting the Electrical Mechanic on his work, including lubrication. Dated May 1970.trams, tramways, depot, safety, workshops, electrical equipment, instructions, procedures, controllers