Historically significant for at the time it demonstrated aspects of the evolution of Ballarat Tramways and yields information about the formation of the tramways, the Councils viewpoint and has a strong association with the Mayor of the time.Twenty two page book, produced by photocopying, side stapled and bound with a red plastic binding, titled "Mayor's Special Report Ballarat Tramways", dated 20 September 1971 for presentation to the City of Ballaarat Council Meeting 27 Sept. 1971 and signed by the Mayor, J.A.Chisholm. Note pages 18 and 19 have been reversed. Comprises: Page 1 - map (image 1829i1) - of Ballarat (Ballaarat) showing the horse tram routes in red (appear to have been drawn in with a red pencil). Note the Sebastopol route terminates at Rubicon St. Page 3 - letter to the City Councillors from the Mayor Page 4 - Outline of the "The Ballarat Tramway System" Pages 5 - 7 - Conditions for tendering the horse tram system within the City of Ballarat" Pages 8 - 11 - Specifications and Agreement for the Ballaarat Tramways (horse trams). pages 12 - 19 - Memorandum of Agreement with the British Insulated Wire Company (later ESCo) Page 20 - Copy of letter from the Secretary of the SEC to the Minister of Fuel and Power, dated 10 Sept. 1971 advising of the formal abandonment of the Ballarat and Bendigo tramway systems. Page 21 - five photos (image 1829i3) of trams in Ballarat, including the bogie tram decorated for the Queens visit, courtesy of Mr. L. J. Denmead, Tramways Superintendent. Page 22 - Plan (image 1829i2) of Ballarat Bus Services, showing route numbers, destinations and existing tramway routes. 3rd copy added 16/7/2010trams, tramways, city of ballaarat, mayor's reports, ballaarat tramway company, british insulated wire company, esco, bus services, sec

12 page pamphlet printed on light grey paper with blue SEC logo and blue border on each page that has text. Titled "The Victorian State System of Electricity and Fuel Supply", with subsidiary title "Its Objectives and Progress". Dated January 1938. Produced by the State Electricity Commission of Victoria, Sets out the constitution and objects of Victorian State Power system, notes Act of Parliament of 1918, Yallourn, Newport B, Richmond, Ballarat and Geelong Power stations, Sugarloaf - Rubicon Hydro electric stations. Other subjects are Rural Electrification, system growth, tariffs, and financial stability, Kiewa, and future planning. Only mention of the tramways is the amount of fixed capital involved - L328,000. trams, tramways, power supply, secv, electricity generation

Titled "Eight years to clear tram tracks", about the time planned to remove tram tracks in Ballarat by the CRB on their roads. Notes agreement with the SEC, mentions the Minister for Fuel and Power Mr. Balfour, cost $1.25million, quotes Mr. Oppy of the CRB. Notes that work on the removal of tracks in Sturt St had commenced this week. The second cutting includes a photo of a Mr G Hettich saw cutting the road surface - note the use of the term "instruments" in the caption.Yields information about the starting of track removal in Sturt St Ballarat and later on in other parts of the system, following closure of the SEC operated system.Newspaper cutting from The Courier, about 22/9/1971, about the removal of track in Ballarat and Bendigo. Has the newspaper source on the top edge in ink.crb, sturt st, closure, dismantling, track removal

Document regarding the abandonment of tramways in Ballarat and Bendigo. Presented to State Parliament Sept. 1970 by the MInister for Fuel and Power, the Hon J C M Balfour MLA. Outlines the losses incurred by the SEC, replacement public transport system, the worn out nature of the system, the gifting of one Bendigo tramcar to the AETM, costs of track repairs and new trramcars, tenders for replacement bus services, retrenchment payments to staff, reconstruction of existing roads following removal of the tracks, and town planning and traffic aspects. Includes a photo of a bus and interior seating. A graph from 1934 to 1970 shows the service miles, passengers carried, average fare, expenditure, revenue and loss, along with dates of major fare revisions.Yields information about the 1970 proposal to close Ballarat and Bendigo tramway systems which was successful despite previous attempts when the Bolte Governments did not have the numbers in the upper house.Document 16 Quarto sheets, duplicated and one sheet with a folded colour graph.In ink on front sheet "D/T/S"tramways, ballarat, bendigo, abandonment, closure, parliament

Newspaper report on the issue of the disposal of former SEC Bendigo trams following the closure of the system. The Adelaide-based tramway museum (AETM) was allocated Birney No. 29 by the SEC and agreed to by the Minister for Fuel and Power Mr Balfour. When they tried to collect it, the loading was stopped, with the agreement of the City of Bendigo, quoting Mayor Cr J P Pearce. The newspaper gives the background to the issue of the retention by Bendigo of the former SEC fleet. Following this action, no other tramcars that had been allocated at the time left Bendigo. In 1975, the Government paid the Bendigo Trust to reconstruct a Birney that had been scrapped before the closure of the Bendigo system which was given to the AETM. See the AETM website for further details - tram 303. Story by Barry Cail. See item 8779 for the Herald Sun report of the same date. On the bottom left-hand corner of page 2, (see second image) is an item titled "Question on Tourist Trams", outlining several questions that Mr Floyd (Labour, Williamstown) will ask the Minister of Transport Mr Wilcox about the operation of Tourist trams, safety and insurance, and whether tourist trams will run in Ballarat.Yields information about the Bendigo system following closure and the retention of tramcars.Newspaper - page 1 of The Bendigo Advertiser 24/10/1972 - newsprintbendigo, tramcars, aetm, birney tramcars, tram 29, tram 303, adelaide, tramcar disposals, ballarat, tourist trams, safety

Austral 8 HP oil engine on 4 wheeled steel chassis with wrought iron wheels. Two double flywheels and flat belt pulley. Water cooled exhaust system at the crank end of the engine. Galvanised iron fuel tank slung under the engine. Painted green and black with red wheels.On an oval brass plate on the side of the engine :- "The Austral Oil Engine / Ronaldson Bros / Makers / No 663 / & Tippett / Ballarat Victoria"machinery ... engine ... oil ... metalwork

The heavy twin tanks formerly contained vaporised kerosene which was used as a fuel to light the lantern. Kerosene became available in the 1860s as the oil industry in the United States developed, and vaporised kerosene soon became the most common system of illumination. The kerosene vapour lamp was perfected by Chance Bros. for burning the light in their renowned lenses. The system involved vaporising kerosene under pressure and mixing it with air and then burning the vapour to heat an incandescent mantle. The lamp had to be watched throughout the night in case a mantle broke, and the tanks needed to be maintained by hand-pumping each hour or so. Kerosene tanks like these were developed in the early twentieth century, and kerosene as a fuel was phased out by electricity, with the last kerosene system in Australia eventually replaced in 1985. The wick lamp in Gabo Island’s light was altered to a vaporised incandescent kerosene mantle burner in 1909. They would have been in use until 1935, when the light was electrified and the original first-order lens was replaced by a fourth-order lens. The Gabo Island tanks, which are presumed to be those used in the lighthouse between 1909 and 1935, are not attached to the optical apparatus and are no longer in the lighthouse. They are also missing the pressure gauges that were formerly attached to the top of each cylinder. Cape Schanck has a pair of unattached tanks, which are not historically associated with the lighthouse. Point Hicks has an iron stand that formerly supported its lighthouse oil tanks. Despite their lack of intactness, the Gabo Island tanks have first level contributory significance for their provenance to the lightstation and historic association with the lantern’s original Chance Brothers first order lens, which was removed in 1935Two large green cylinders standing in a metal frame. There is also a pumping mechanism attached to the stand with a wooden handle.

A small number of heavy cast iron weights and two rods remain at the Point Hicks Lightstation. These weights comprise one rod with a forked top and four circular weights attached to the bottom of the shaft. The weights and rods were part of the original clockwork mechanism that was fitted beneath the lens to keep the kerosene‐fuelled light turning. They were attached to a cable or chains and moved vertically in similar fashion to the way weights move on grandfather clocks. As the weight fell, the optic clock was driven and the lens was turned. To keep the clock turning, the weight needed to be wound back up to the top of its travel. The cables and weights in this lighthouse were visible as they moved through the length of the tower up to the lantern room. It was usual for systems to move inside a tube extending up to the top, but in this case the tower’s cast iron spiral staircase, which is supported on cantilever cast iron brackets set into the concrete wall, spiralled around the space in which they moved. Lighthouse keepers had the arduous job of having to constantly wind the clock to keep the light active, and at least two keepers needed to observe a strict roster of hours. When electric motors were invented, all of this became redundant and the motors were able to turn the optic for as long as there was power to drive them. In December 1964, the original 1890 Chance Bros kerosene‐fuelled light and clockwork mechanism were replaced by small electric motor, and the number of keepers reduced to two. The six circular weights and rods originate from the obsolete system and may have been part of a larger set. Wilsons Promontory retains seven of its original set of ten weights, all of which are detached from the tower’s weight tube. Cape Schanck has a set of fourteen weights remaining in situ as well as another four detached weights, which have inscriptions. One weight is displayed in the lantern room at Cape Otway. The image shows four of the clockwork weights attached to a rod with a forked top. They were part of the original clockwork mechanism that was fitted beneath the lens to keep the kerosene‐fuelled light turning. The Aldis lamp in its case sits on the floor next to the weights. Source: Parks Victoria.The Point Hicks weights have first level contributory significance for the insights they provide into the superseded technology and operations of a late nineteenth century lighthouse. They are well provenanced and are significant for their historic value as part of the lightstation’s Chance Brothers optical system installed in 1890. Four circular metal weights are stored on a metal rod with a forked section at the top. The weights have a cut out section which allows the weights to be removed easily.

A small number of heavy cast iron weights and two rods remain at the Point Hicks. The weights and rods were part of the original clockwork mechanism that was fitted beneath the lens to keep the kerosene-fuelled light turning. They were attached to a cable or chains and moved vertically in similar fashion to the way weights move on grandfather clocks. As the weight fell, the optic clock was driven and the lens was turned. To keep the clock turning, the weight needed to be wound back up to the top of its travel. The cables and weights in this lighthouse were visible as they moved through the length of the tower up to the lantern room. It was usual for systems to move inside a tube extending up to the top, but in this case the tower’s cast iron spiral staircase, which is supported on cantilever cast iron brackets set into the concrete wall, spiralled around the space in which they moved. Lighthouse keepers had the arduous job of having to constantly wind the clock to keep the light active, and at least two keepers needed to observe a strict roster of hours. When electric motors were invented, all of this became redundant and the motors were able to turn the optic for as long as there was power to drive them. In December 1964, the original 1890 Chance Bros kerosene-fuelled light and clockwork mechanism were replaced by small electric motor, and the number of keepers reduced to two. The six circular weights and rods originate from the obsolete system and may have been part of a larger set. Wilsons Promontory retains seven of its original set of ten weights, all of which are detached from the tower’s weight tube. Cape Schanck has a set of fourteen weights remaining in situ as well as another four detached weights, which have inscriptions . One weight is displayed in the lantern room at Cape Otway. The Point Hicks weights have first level contributory significance for the insights they provide into the superseded technology and operations of a late nineteenth century lighthouse. They are well provenanced and are significant for their historic value as part of the lightstation’s Chance Brothers optical system installed in 1890.PHLS0005.1 Round cast iron weight with flat base used for lens clock-work mechanism attached to a bent metal rod. PHLS0005.2 Removable round cast iron weight with flat base used for lens clock-work mechanism stored above the other weight.

Was the stand for a Chance Brothers air & oil containers fitted with pump handle & pressure gauges.This type of installation was once common and relied on the lightkeeper having to pressurise the cylinders manually at regular intervals throughout the hours of darkness. The oil was fed under pressure to the burner mantle. It is all that remains of an air and kerosene oil tank installation, with each rounded side formerly supporting a heavy iron tank. The containers would have been fitted with a pump handle and pressure gauges. An intact assemblage is displayed in the AMSA offices, Canberra with a text that explains ‘This type of installation was once common and relied on the lightkeeper having to pressurise the cylinders manually at regular intervals throughout the hours of darkness’.The system involved vaporising kerosene under pressure and mixing it with air and then burning the vapour to heat an incandescent mantle. The use of kerosene as a fuel to light the lantern became the most common system of illumination from the 1860s after the oil industry in the United States began to develop. The kerosene vapour burner was created in 1901 by British inventor Arthur Kitson (1859-1937) and perfected by Chance Bros for burning a more intense light in their renowned lenses. The lamp had to be watched throughout the night in case a mantle broke, and the tanks needed to be maintained by hand-pumping each hour or so. The Point Hicks lantern was initially lit by a six-wick Trinity house kerosene burner. This was replaced by the more efficient and brighter 55mm vaporised kerosene mantle burner in 1905, and the tank stand is probably original to this apparatus. Electricity eventually replaced kerosene at Point Hicks in 1964 making the tank installation obsolete, and the last kerosene system in an Australian lighthouse was replaced in 1985. Gabo Island Lightstation has a pair of tanks that are not attached to the optical system and are no longer in the lighthouse. They are also missing the pressure gauges that were formerly attached to the top of each cylinder. An intact tank assemblage is displayed at the Cape Schanck Lighthouse Museum it is detached and not original to the lighthouse. Although corroded, the remnant Point Hicks tank stand has first level contributory importance to the lightstation. It is significant for its provenance and historical value as part of the Chance Bros vaporised kerosene burner introduced in 1905 to intensify the light and improve the efficiency of the system. The rusted iron stand rests on four short legs and is shaped like a pair of spectacles.

Set of five pamphlets of an industrial or public relations nature issued during the early to mid 1980's. .1 - "The Wage Freeze" - foolscap printed on yellow paper, issued by the ATMOEA Vic Branch May 1983. .2 - "Public Transport: You pay more for less" - change of services, staff cuts, safety, Fuel conservation and what should be done - issued by the North Fitzroy Tramways Depot Committee and notes a meeting on Monday 17 September - (1984 by calendar check) - foolscap printed both sides on white paper. .3 - "$440,000 tram stripped for spare parts" - tram Z137, stripped - duplicated on blue quarto paper, issued by "concerned tramway workers" . Notes the tram had entered service in 1980 and had been stored for some time. .4 - "Open letter to passengers of Melbourne Tramway System" - complaining about the shortage of crews at Kew Depot - and asking people to register a complaint with the Minister Peter Spyker. Issued by "concerned Kew tram workers" - printed on blue A4 paper. .5 - "They are going to sell off Public Transport:" - ATMOEA - signed by Jim Harper - about the forthcoming 1 Oct. 1988 state election, asking readers to put the Liberals last. Printed on yellow A4 paper both sides.Has in to the top right hand corner in ink "72Drv Sun"trams, tramways, mta, unions, atmoea, wages, public transport, kew depot, north fitzroy depot, tramcars, tram 137

Folder - heavy red covers with two screw sets containing a photocopy of a report by William Pollock, prepared after the closure of the cable tram system titled ""The Melbourne Cable Tramway System". Image numbers listed: Folder – htd4715i1 Inside of folder – htd4715i2.jpg Report –Photocopy of a 14 foolscap sheets, paper titled “The Melbourne Cable Tramway System” by William Pollock, describing the system in detail, listing 26 appendices. Has notes on each Power Station, including a table of opening, closing, power produced and cables, fuel, permanent way (track), cables, underground gear, tunnels, flooding and the grip. Image – htd4714i3.pdf Appendix 1 – Handwritten table “Cost the Melbourne Tramway System” – photocopied special size sheet folded. See image htd4715i4.jpg 2 – Drawing – Typical Power House layout - image htd4715i5.jpg 3 – Drawing – Head of Cable Driver – htd4715i6.jpg 4 – Drawing – Rope Drive – htd4715i7.jpg 5 – Photocopy of a Fuel and Water test sheet for the Esplanade Power House – two sheets – 14/5/1918 – htd4715i8.jpg and htd4715i9.jpg 6 – Section of Cable Tram track – htd4715i10.jpg 7 – Tar Burner used by MTOC 1893 – 1900 - htd4715i11.jpg 8 – Yoke Bracket for line drums – A1 Pulley – htd4715i12.jpg 9 – Tunnel Yoke – htd4715i13.jpg 10 – Elevating Wheel or Pulley with shield plate – htd4715i14.jpg 11 – Curve Pulleys, curve drum and rubbing bar – 2 sheets – htd4715i15.jpg and htd4715i16.jpg 12 – Curve or Conical drum – htd4715i17.jpg 13 – Cable Separating pulley or cone line drum – htd4715i18.jpg 14 – Yoke Pulley or General Pulley – htd4715i19.jpg 15 – Yoke Bracket for Drums – htd4715i20.jpg 16 – Automatic Switch Gear – htd4715i21.jpg 17 – Hand operated switch gear – htd4715i22.jpg 18 – Hand pickup – htd4715i23.jpg 19 & 20 – Photo of bunched strands and damaged cable – htd4715i24 21 – Diagram of Rope – Clarendon St Rope No. 41 – htd4715i25.jpg 22 – Strand Alarm – htd4715i26.jpg 23 – Rope History – two sheets – htd4715i27 and htd4715i28.jpg 24 – Rope Splice – htd4715i29.jpg 25 – Cable Grip – htd4715i30.jpg 26 – Crown Pulley – two sheets – htd4715i30 and htd4715i31trams, tramways, drawings, tramcars, cable trams, trackwork, mto co, reports

Set of reports, known as the "Victorian Transport Study - (The Lonie Report)", produced during 1980 and supplementary reports. Prepared from Robert Maclellan Minister of Transport by W. M Lonie. Documents resulted in significant change to the Victorian transport structures, especially the way freight and railway transport was handled. see http://en.wikipedia.org/wiki/Lonie_Report (accessed 25-9-2014) Documents generally perfect bound into manila coloured covers - unless noted otherwise. Comprises: .1 - Final Report - 174 pages .2 - Background to Transport Finance - white comb bound - 192 pages .3 - Summary of Submissions - fawn colour comb bound - 70 pages .4 - Background to State Development - 94 pages .5 - Land transport in Victoria - Historical background - white comb bound - 31 pages .6 - Bicycles - 19 pages .7 - Car pooling - 15 pages .8 - VicRail Financial system - 35 pages .9 - Transport of Fertilisers - 17 pages .10 - Staggered working hours - white comb bound - 16 pages .11 - Administration of Transport - 79 pages .12 - Metropolitan Roads - 60 pages .13 - Transport of Students - 24 pages .14 - Fuel for transport - unbound - stapled in top corner - photocopy of a bound document - 42 pages. This set does not comprise the full set of reports produced - see final document. .15 Autum 2016 issue of the Geelong Steam Preservation Society (Bellarine Railway) which contains an article on the Lonie Report "From Rags to Riches (Part 1). - See images 620a, 620b and 620c. The Winter issue did not have any materials on tramways.trams, tramways, transport, victoria, lonie report, railways, melbourne, tramways