Australian, attached to webbing E146. Mid. Eastequipment, ww2, army

Germanequipment, ww1, army

Germanequipment, ww1, army

Mark 2 USequipment, c1970, us army

Possibly WWIIThere is a maroon canister, flotation bladderMake of mask is "NOMAD" and stamp on bottom of canister says No.4A WILLOW 1942

second world war (ww2), 1939 - 1945, eequipment/gear, ballarat rsl, ballarat

During World War One poisonous gas was used as a weapon. When gas was detected or suspected an alarm was given in the trenches so soldiers could put on masks and protective gear. The gas rattle was a simple and effective method of raising the alarm. Gas precautions were taken in World War Two but gas was not used. This rattle might be WWI vintage or it might be from WWII era.A wooden box incorporating a toothed cog attached to a 'swing' handle. When swung the toothed cog engaged with a wooden flap enclosed in the box causing a loud noise. world war one, wwi, gas

Yields information about the Eaglehawk terminus, tram 18 and the tram liveries in 1963.Black and white print of Ballarat 12, crossing Lydiard St, in Sturt St with the destination of Gardens via View Point. Has the Commonwealth Bank, Odeon theatre, Mechanics Institute, Ballarat Gas Co, Unicorn Hotel, and Colonial Mutual Life buildings in the background. A group of children with bicycles are on the corner and the newspaper seller stand. Photo Doug Colquhoun 23/3/1959. Photo print courtesy of Port Dock Railway Museum, now the National Railway Museum. See worksheet 4311 for letter and details of prints sent to Bill Scott, 19/10/2001. Any photo credit to mention NRM Collection.On rear of copy In top left hand corner "72) No . 71 withdrawn" a yellow label with "24" crossed out over a sticker "Photo No. Reduced to 82% 145x80 see photocopy for masking" and "22" crossed out in the top right hand corner. In the lower left hand corner "SEC Ballarat #12 / Sturt St @ Lydiard / 23/3/59 / Douglas A Colquhoun"trams, tramways, sturt st, lydiard st, tram 12

Historic item used in WW2Instructions for use printed on cannister. Mask inscribed with lot no.21-3-SC.

This infant protectors was donated to the Kew Historical Society by officers of the City of Kew. It was presumably held by the City for protection against gas attacks.Rare piece of WW1 equipment designed to protect infants on the home front.A respirator designed by the US Army O.C.D to be used to protect a baby in case of a gas attack. The respirator comprises a green pliofilm bag with a draw-string to secure the bag after a baby was placed in it. A hose and hand-action pump provides air for the baby. The respirator includes a detailed description of how it is to be used and stored. infant respirator, gas mask, world war two

Coloured photograph with wooden frame showing soldiers of 5/6RVR

Mask used by troops to prevent inhaling noxious gasses during attacks. carried in bag over shoulder and filtted when neededAs manufactured and distributed by General Motors Holden for military and civilian use.Canvas bag divided into five sections containing a rubber mask with head straps and flexible hose off mouth piece, bag fitted with shoulder strapV11 GMH & CO 1942gas mask, military

This mask set is part of the North East Region Water Authority collection in the Wodonga Historical Society. Wodonga's drinking water and wastewater operations were originally managed by the Wodonga Waterworks Trust, which was established in 1897, after Wodonga became a separate shire in 1876. In 1923 a Wodonga Waterworks Trust referendum to provide funding for new infrastructure to supply more water of better quality to Wodonga was passed. This included building the Wodonga Water Tower and it was completed in 1924. It supplied water to Wodonga until 1959, when it was drained and decommissioned after the No 1 Basin on Huon Hill was completed in 1958. In 1983 the Wodonga Waterworks Trust and the Wodonga Sewerage Authority became part of the Wodonga Council. And by 1989 a filtration plant at Huon Hill was completed, which provided filtered water of improved quality to Wodonga, in accordance with the World Health Organisation’s guidelines. In 1994 the Kiewa Murray Region Water Authority took over the Wodonga Council’s water and wastewater operations, and then in 1999 the Kiewa Murray Region Water Authority combined with the Ovens Region Water Authority and became the North East Region Water Authority or NERWA. NERWA then became known as North East Water. Siebe Gorman was a British manufacturer of industrial respirators that served the mining industry, the chemical industry, and the agricultural industry from 1938 until the 1980s. The "Puretha" line refers to the canister included, which was designed to tackle industrial hazards.Siebe Gorman "Puretha" Type C Kit with Vista Vision Facepiece. The facepiece consists of a formed plastic lens held on by a white retaining ring that stretches around the rubber facepiece and is connected by two thumbscrew lugs. The exhale assembly is covered by a steel mesh.The hose is a standard industrial hose. The canister is attached by a khaki webbing material. An instruction sheet is included. The kit is a small leather case with two front latches. Safety instructions and chemical information on canister label. On label: EVERYTHING FOR SAFETY EVERYWHERE Date filled 28 DEC 1961 NO. 675 north east region water authority, gas mask, respirator, sieba gordon

A Weller-Ash nitrous oxide apparatus that has been sectioned, complete with a brown fabric Cattlin's rebreather bag, stopcock, rubber tubing, and celluloid mask, on an iron stand that has been decorated with a natural, gold-coloured leaf motif. The base of the stand is black, and has a brown foot pedal which controlled gas flow to fill the bag. Much of the stand and the dials on either side are a brassy gold colour.nitrous oxide, rebreathing, anaesthesia, dentistry, surgery

An Austox "Dental and Midwifery" (D-M) Machine on a stand with castors. The machine has attached black corrugated tubing with masks to go over the nose and mouth. There are two white, circular chambers on either side of the machine into which oxygen and nitrous oxide respectively were piped.anaesthesia, midwifery, dentistry, nitrous oxide, oxygen gas, oxygen

Respirator, Anti-Gas, General Civilian, Type C1:Civilian, British. Respirator thin black rubber mask, made of a single piece folded around into a tapering tube with the join sealed by a brown cloth patch. Plain cardboard box for a respirator (also used as a carrier), inside the box is a card insert with a large hole cut in the centre, on the inside of the lid are instructions for packing a respirator (From Imperial War Museum website) The rubber has perished and the straps are no longer able to be attached to the headpiece. 12 8 38, POPPE LOT 2984

Green case with lock at the front and plastic green handle on top with a manufacturer's label stuck on top. Inside the case is divided into three separate section, one containing a clear plastic mask with latex cushioning, the second containing a grey resuscitation bulb and the third containing a smaller clear plastic mask with latex cushioning, still in original packaging.Green manufacturer's label on top of case: THE CIG AIR-VIVA RESUSCITATOR Inside case: Original label 'Operating Instructions'ambu, resuscitator, cig air-viva

The Coxeter-Mushin carbon dioxide absorber consists of the main metal body, painted aquamarine, fixed to a stand. The cylindrical silver metal cannister on the left was used to contain ether, while that on the right contained soda lime. The apparatus has been sectioned to show the inside of the two cannisters, the right of which has an arrow drawn inside to indicate the flow of air breathed out by a patient. The front cover over the control dials has also been removed to show the mechanism. The two circular holes above the dials, facing forward, are where two corrugated tubes would attach; both of these tubes attached to the mask of the patient. The round yellow knob in the centre controls the Compensating Valve, which allowed the anaesthetist to raise or lower the rebreathing bag to allow air into the circuit or expel anaesthetic gas.anaesthesia, carbon dioxide, ether, soda lime

With the introduction of nitrous oxide for patients undergoing dental treatment, 100% nitrous oxide was usually administered as an anaesthetic. This caused the patient to lose consciousness quickly and could also cause severe hypoxia. In the late 1890s, dentist Samuel Stockton White introduced this two cylinder apparatus, which could administer oxygen with N2O.Early model apparatus with cast iron stand, and two gas bottles. Comes with two canvas gas bags and a detached metal mask and fabric connecting tube.samuel stockton white, nitrous oxide, oxygen, hypoxia

Sir Frederick William Hewitt was a great advocate of nitrous oxide anaesthesia, mainly for short procedures. In 1885, he reviewed the methods of administration and concluded that accurately fitting valves were essential at the commencement of the inhalation, in order to ensure the rapid washout of air from the lungs; and there was a distinct advantage in allowing some rebreathing of nitrous oxide towards the end of inhalation. He thus devised the stopcock. The stopcock consists of a cylinder with two rotating sleeves and two rubber flap valves. The arrangement allows air to be breathed either through the valves or rebreathed to and from the bag; nitrous oxide to be breathed either through the valves from the bag and out to the atmosphere or rebreathed to and from the bag. Soon after the introduction of this stopcock, there was an increased interest in administering oxygen in combination with nitrous oxide.Amber coloured ether inhaler, with leather mask, celluloid shield and inflatable cushion with attached Hewitt's stopcock.hewitt, stopcock, celluloid, ether, inhaler, mask, rebreathing

This Boyle’s machine was made by the British Oxygen Company (BOC) in the 1950’s. The original Boyle's machine was invented by the British anaesthetist, Henry Boyle in 1917. His machine was a modification of the American Gwathmey apparatus of 1912, and became the best known early continuous flow anaesthetic machine. The Boyle’s machine was first made by Coxeter and Sons, under the direction of Lord George Wellesly, which was later acquired by the British Oxygen Company (BOC). Though a lot of changes have been made to the original design of the Boyle’s machine, the basic structure remains the same today.Green trolley on casters with flowmeter and vaporiser bottles attached to a stainless steel cross bar. There is a glass shelf at top of the trolley and a second glass shelf at base of trolley, above a pull out drawer. The pull out drawer contains 4 x black rubber masks, 3 x black rubber tubing connectors, 4 x seals, 1 a black corrugated rubber hose with red rebreather bag, red tube and masonite support board.Tin plate attached to upper portion of trolley: THE / BOYLE / apparatus / BY THE BRITISH OXYGEN CO. LTD.henry boyle, anaesthetic machine, gas, oxygen, flowmeter, nitrous oxide, british oxygen company, boc, coxeter and sons