Australian Army officer's cap. Ordnance CorpMajor B F B Dance

Australian Government Clothing Factory

Black and white photograph. Crop of sugar beet in a paddock with a man standing in the middle of it and a draught horse in the background. Sugar beet mill on right side.Caption on front, "A Crop of Sugar Beet. Maffra." On reverse, "A Government experimental plot of beets grown near the factory."crop, sugar beet, maffra, government experimental plot, mill, government factory, sugar beet mill

Issued to Aircraftsman Bernard Farley in 1976 as part of his initial issue of uniform on joining the Permanent Air ForceThis item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) Peaked Hat - Blue Grey. This uniform was in the period 1966 - 2001 as the primary daily uniform in the office environment. Polyester working dress is approved for wear employed in office or business type environments. The trousers have a belted waist and zip front, with two slant side pockets, money fob pocket below the waist on right side and two rear slit pockets. The trouser leg is pleated at the waist belt in the front. Maker: Australian Government Clothing Factory

00090.1 Warrent Officer 2nd class Kharki polly dress, 4 plastic brass look buttons front, 1 plastic brass look buttons breast pockets 2 brass belt keepers, 1 crown cloth badge each sleeve, 1 plastic brass look buttons on eppilate, 1 brass unint badge per collar. 1 belt 00090.2 pollyester tie, 00090.3 pollyester trousers, 00090.4 beltCommonwealth government clothing factory 1963,

This object is part of a collection of items donated by the Hopgood family that belonged to Bendigo Tramways employee, Barry Hopgood.Number 17, SEC Bendigo Tramways Cap, made from green wool felt, black vinyl strap with two silver SEC buttons and a black vinyl peak, Commonwealth Government Clothing Factory, Melbourne

Clothing. Single knife pleat on either side of front waistband, 20 cms deep fly front, with plastic zip, and metal fastener on waistband. Also evidence of an internal front tab fastening with cotton stitched button hole, but button is missing. Two side pockets sewn into side seams, and two bound pockets on either side of back -all polyester or nylon fabric. Seven 1 cm belt loops around waistband. A 3 cm wide strip of red flannel is stitched from waistband to hem on the outer side of each leg. This is over laid with a 1.2cm wide gold metal thread, decorative weave braid.AGCF 1982 (Australian Government Clothing Factory).costume, male ceremonial, marong municipal band uniform trousers

internal view of the manufacturing operations at the Commonwealth Government Ordinance Factory, Bendigo

Partial dress uniform of RAAF for "Peter Stoklahsa". Enlisted 1966 to 1987. Refer to cat No. 7674P.1. Dark blue pants size 97. White label on inside. 4 pockets, clip to do up and white elastic lining on inside. 2. RAAF blue jacket. Two breast pockets and two lower pocket flaps with no pocket. Four large front buttons and two smaller pocket buttons. 'Australia' shoulder flashes and service ribbon above left chest pocket. Inside cotton lining and inside pocket on right side. Makers label sewn on inside and Commonwealth emblem on sleeve. 3. Blue Air Force cap size 7. Leather inside lining and plastic and black material band. Button on each side with plastic strap. Gold Air Force emblem of Laurel leaves, spread Eagle and Crown.Inside maker - Australian Government Clothing Factory. Size 7.raaf, uniform, peter stoklahsa

Black & white photograph of the large machinary at the Commonwealth Government Ordinaace Factory Bendigo Two copies Taken in 1950s.

Part of the saddle equipment of a Light Horse Trooper. the loop and strap on side was to secure a sword.Leather wallet holding two horse shoes. Manufactured by the Commonwealth Government Harness Factory (CGHF) Groom Street Clifton Hill Victoria.CGHF / 337horseshoe, wallet, light horse

Standard issue peaked cap for 1988.Peaked khaki cloth cap with brown 18mm leather chin strap with two 13mm AMF gilt buttons (crown and map only). Khaki cloth covered peak. Royal Aust. Signals cap badge. Brown leather sweat band. Plastic covered, grey cloth liner with black stamped manufacturer's, etc. details. Australian Government Clothing Factory and logo Size /|\ 56 VIC 1988 (Note - no personal markings) headgear, cap

No particular information is available on this item but as the matches were made at a Commonwealth Government factory they probably date from World War Two (1939-45). At this time many essential items that would be of particular use for the war effort were produced by Government factories to ensure a regular supply and to regulate the use within the community. This item has no known local provenance but is of some historical interest as an example of matches produced mid 20th century. Matches at that time were much more important as a lighting mechanism and a common household item. This is round cardboard box in two sections with a circular cardboard lid (slightly bent). The box has a striped black and cream pattern on it. The box has 21 waxed matches with blue or white tips.‘The Commonwealth Match Works, Melbourne, Waterproof’commonwealth match works, warrnambool

White with Navy Tally BandInside hat: Australian Government Clothing Factory - IDENT No: 8405.66.075.6073 Vic 1988 RAN Size 59

Clothing. Pointed lapel collar, with underside of collar lined with felt. Two brass metal badges in a Leidertafel style - one on each side of collar. Cloth circular badges at the top of each sleeve are embroidered with a coat-of-arms, below which are two shields, one blue, and embroidered with a bunch of grapes, one red embroidered with a sheaf of wheat, a sheep, and perhaps a symbol of the landscape. Two breast pockets, rectangular with rounded lower corners and a shield shaped flap, closed with a 2 cm brass button impressed with a laurel wreath, and horn, suspended by a cord, and triple loop-a replica of British Light Infantry buttons. Two lower ''pockets'' are flaps only, giving the impression of a pocket only. Jacket lined with blue taffeta-like fabric-possibly polyester. One internal bound pocket inside right front. Four 2.5cm brass buttons (as on pockets) at centre front opening. All buttons have a metal back, and metal loop, which enables the buttons to be pinned to the garment, enabling removal for cleaning purposes.On inside breast pocket: A Quality Garment by Australian Government Clothing Factory. On back of buttons : Stokes Australia.costume, male ceremonial, marong municipal band blazer

In the years following the Crimean War (1854-1857J) there was a great concern in the Colony that Imperial Russia would attempt an invasion. Coastal defences in the colony of Victoria were greatly strengthened by the Government as a result. Warrnambool was originally protected by cannons at Cannon Hill, approximately 1 kilometer west of the Flagstaff Hill Fortifications. These cannons included two 1866 guns, both 80 Pound Rifled Muzzle Loaders (RML) purchased by Victoria’s Colonial Government. They were part of a shipment of 26 such guns sent from England in December 1866. They are registered as No. 23 (80cwt-2qr-0lbs) - Gun 1, and No.13 (81cwt-1qr-12lbs) - Gun 2. They were cast at the Royal Gun Factory, Woolwich Arsenal, in 1866 and have a 6.3 inch bore. Both barrels carry the Royal Cypher of Queen Victoria, Insignia of the Royal Engineers, within the Garter and Motto surmounted by the Crown, with the Royal Cypher of Queen Victoria within the Garter (letters in centre “VR”, motto “HONI SOIT QUI MAL Y PENSE”, "Shame be to him who thinks evil of it."). The guns were originally supplied with wooden carriages. (The Royal Arsenal at Woolwich, England, was established eleven years after the Restoration of King Charles II. It was the principal supplier of armaments to the British and Empire Governments. At the height of its operations during World War One the factory covered 1300 acres and employed very nearly 80,000 workers. Woolwich was the Headquarters of the Royal Artillery since the raising of that Regiment in 1716. The Arsenal was closed in the late 1960’s.) These two cannons were transferred to the Warrnambool Garrison Artillery Battery Fortifications erected at Flagstaff Hill in 1887 as part of Victoria’s Coastal Defences. The original wooden carriages were subsequently replaced with the present iron garrison carriages in 1888. They are a “C” pivot. The ‘racers’ or curved track set into the floor of the gun emplacement (which enabled the guns to be traversed more quickly) are as specified for guns up to 10 inch, being of wrought iron 2.78 inches wide. A temporary third gun, now no longer on Flagstaff Hill’s site, was a 5 inch Rifled Breech Loading (BL) Armstrong gun mounted on an Elswick hydro pneumatic disappearing carriage It was faster to load and fire than the 80 pound RMLs and its arrival spelt the end of the older 80 pound guns’ useful life, apart from being used for practice sessions. The 5 inch BL gun was the main defensive weapon of the Warrnambool Battery until the Battery was downgraded in importance and the gun was recalled to Melbourne in 1910. The State of Victoria took over the ownership of the guns at the time of Australian Federation in 1901. In about 1901/1902 the Garrison Battery was converted to the Warrnambool Battery of the Australian Field Artillery (No 4 Field Battery). It was equipped with 4.7 inch naval guns mounted on field carriages. They were now a mobile unit but continued to use the Warrnambool Garrison area at Flagstaff Hill for practice. When the Fortifications were declared obsolete the two 80 Pounder RML were relocated to Cannon Hill in 1910. On the outbreak of World War One the 4.7 inch guns were recalled to Melbourne, and the Battery was disbanded. Most of the personnel probably re-enlisted in the local 4th Australian Light Horse Regiment. The two 80 Pounder RML were moved back to the Fortifications in 1973. They were both fully restored by Army First Year Apprentices at the Ordinance Factory in Bendigo in time for the centenary year of the fortifications in 1987. The guns are capable of firing 80 pound (32.3kg) armour piercing exploding shells 3.65kms out to sea. They were original manned by volunteers before a paid Garrison was established. Now the Guns are again fired by volunteers on Special Event days. Since restoration the Gun Number 1 had been fired on a regular basis but Gun Number 2 hadn’t been fired since the mid 1990’s. In April 2015 Gun Number 2 was serviced in preparation for the firing of both cannons on the ANZAC Centenary commemorations on April 25th 2015. Other guns from the original Cannon Hill location were obsolete by the time the 1887 Warrnambool Garrison Artillery Battery was built. These guns are (1) a 32 Pounder Muzzle Loading Smooth Bore (SB) cast in 1813 at the famous Carron Foundry, number 80837 and now located in the Warrnambool Botanic Gardens (2) a 68 Pounder Muzzle Loading Smooth Bore cast in 1861 at the equally august Low Moor Foundry, number 10310 and now located on the lawn area at the entrance to Flagstaff Hill Maritime Village. Both of these guns are mounted on their original wooden garrison carriages. There are only seven 32 Pounder SB made by Carron and fifteen 68 Pounder SB made at Low Moor known to exist in the State of Victoria (Conservation Management Plan for Victorian Guns and Cannon, South Western Victoria, May 2008, ref W/F/05)The Warrnambool Garrison has been added to the Victorian Heritage Register H1250 “for its intact battery and guns, a strong reminder of Victoria’s wealth and determination to protect itself from the perceived threat of invasion in the 1880’s.” The City of Warrnambool is one of several custodians of a collection of artillery pieces of heritage significance at a state, national and international level. These pieces are directly related to the defence of south-west Victoria in the 19th century. The care and preservation come under the Heritage Act 1995. Cannon. 80 Pound Rifled Muzzle Loading (RML) Gun on iron carriage and slide, installed in the Battery at Flagstaff Hill’s Fortifications. Made in 1866 at the Royal Gun Factory (R-G-F), Woolich, England. Gun Reg No 13. Flagstaff Hill Garrison Gun 2 (Gun No. 2). Insignia of the Royal Engineers, and the weight of the gun, stamped on top of the gun’s barrel. There is a brass plate on the side of the gun with the details of 1987 restoration.Stamped into the metal on top of the barrel, Insignia of the Royal Engineers; Garter and Motto “HONI SOIT QUI MAL Y PENSE”, surmounted by the Crown, with the Royal Cypher of Queen Victoria “VR” within the Garter. Also stamped on top of the gun are 2 inward pointing arrows above the weight ”81-1-12”. Brass plate “RESTORATION / BY / FIRST YEAR / APPRENTICES / ORDANANCE FACTORY / BENDIGO 1987”flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, colonial defences, victoria’s coastal defences, warrnambool fortification, warrnambool garrison battery, warrnambool volunteer corps, ordinance, armaments, cannon hill fortifications, 4th australian light horse regiment, no 4 field battery, 80 pound cannon rifled muzzle loaders (rml), victorian colonial government, royal gun factory england, woolwich arsenal, royal cypher of queen victoria, garrison gun

Set of personal papers - typed carbon copies - copy of "Agreement between MMTB and the Commonwealth of Australia for the construction of tramways to serve the Munition Factories at Footscray and Maribyrnong" dated 22/7/1941 and 21/6/1944 to extend tramways. Covers maintenance, construction costs, finances, property issues and provides details in a schedule. .1 - agreement dated 22/7/1941 - Gordon St extensive, Raleigh's Road and West Road to Williamson Road and Raleigh's road to Park Road. .2 - dated 21/6/1944 - extension of Keilor Road to Essendon Airport. .3 - undated - agreement re double track Maribyrnong Road, Gordon St, West Road, Essendon Depot works, Maribyrnong River Images and record revised 20/5/2019.trams, tramways, mmtb, tramways, commonwealth government, agreements, munitions factory, maribyrnong, footscray

Australian Defence Industries (ADI) - Thirty-eight assorted coloured brochures covering Defence Technology, Australian Government Munitions Factories and promotional material for manufactured items.adi history