Gold coloured satin ribbon covering a slipper shape - one bigger, one smaller. The smaller slipper would once have been attached to the larger, but now loose threads remain but the two are separate. A gold coloured satin ribbon rosette is attached to the toe of the slipper.A 53 cm length of ribbon, folded to form a 15 cm loop, and then attached as a single ribbon to the slipper.costume accessories, clothes accessories, golden wedding charm

Object. 1 - Masonic apron made of kid leather with border of watered silk ribbon in the various colours of the rainbow. 3 roundels of water silk with a button in the centre. Backed in red leather. Metal clasp in the shape of snake. 2 - Masonic sash of watered coloured silk, plaited silver band 15cm from end of sash with silver rosette, silver fringe on each end of sash.societies, freemasons, regalia, f. g. jones collection, masonic regalia, masonic apron & sash

Clothing. Infant's cream coloured satin silk bonnet. Back edge trimmed with double layer pleated fabric frill. Front edge trimmed with double sided pleated fabric frill with three layers at front. Rosettes on each corner of pleated fabric with a covered button at the centre. Silk ribbon ties (3.7 cm wide). Fully lined and gathered into back of bonnet with circular covering piece.costume, children's, infant's cream satin silk baby bonnet

This bonnet is part of a collection of clothing donated to the Brighton Historical Society by Dr William and Helen Wells. It is believed to have belonged to William's grandmother Winifred Marshall (nee Hayball, 1886-1971). William's family has had a long association with Brighton, dating back to the town's earliest days in 1843 when his ancestors Robert and Eliza Hayball, who had emigrated to Melbourne two years prior, established a wattle-and-daub hut in what is now New Street, close to Tovell Street. Robert established a business as a timber merchant on the opposite side of New Street. His sons, Robert, William and Edwin took over the firm following his retirement, trading as the Hayball Bros. Hayball Court, which runs off New Street, is named after the family. Robert's son William (1855-1926) married Jessie Robertson and had four children. Their eldest, Winifred Grace Hayball (1886-1971), married Andrew Hollingsworth Marshall at the Black Street Congregational Church in 1907. They subsequently lived in Hill Street, Hawthorn, before moving into a house designed by Andrew and Winifred's brother Robert at 39 Bay Street, Brighton in 1915. Their daughter, Dorothy Marshall (1910-2000) married Robert George (Argie) Wells in 1937 at Wesley College Chapel. They lived in East Malvern until 1947, when they moved into a newly built home in Hawthorn Road, East Brighton, where they lived for the rest of their lives. Their son, William Wells (b. 1939) married Helen Pickering in 1968 and the couple have lived together in Brighton ever since.Pale pink silk bonnet (sleeping or house cap) with cream lace edging. The bonnet is embellished with oval-shaped embroidered appliqué on either side, featuring floral design in white and pale yellow, blue and green. A cream silk ribbon and a row of pale blue and green rosettes run along the top edge between the two appliquéd segments. A length of elastic is sewn through the bottom edge.wells family, winifred grace hayball, winifred grace marshall, bonnet, 1900s

Sash was worn at all meetings except where the program made it in impractical.MGC005.1 and MG005.2 Entrance Ray royal blue cotton sashes with 1cm white border, two white bars worn in centre and a rosette of royal blue, white and gold. It was worn over the right shoulder and joined at the left side below the waist. MGC005.3 Entrance Ray royal blue sash with 1 cm white border and two white bars. There is a yellow square with an embroidered "S" [social] above the bars.methodist girls' comradship rays section, wesley rays ballarat

British Imperial Forces involved in World War 1Rear representation, Flag White Ensign is made up from Commonwealth Countries and displayed as a flag- Top left-hand corner British flag, right-hand top corner Coat of arms of South Africa, bottom-left Coat of Arms for Canada, Bottom right corner Advance Australia Coat of Arms, flag center is for India is a yellow and red rosette and New Zealand is represented by four white 5 pointed stars centralized as representation of the Southern Cross.The flag on the left border is marked with "Groves"british expeditionary forces flag, union jack, white ensign, coat of arms of south africa, coat of arms canada, coat of arms advance australia, rosette of india

.1 EPSN butter keeper trophy - circular base, raised with cow in centre. Four flat metal/silver legs with rosettes top and bottom, which supports circular butter keeper, top half tilts back to reveal strainer tray in centre. Either side is handle or lever to tilt top. Handle is two handles joined at top with grip ball 2/3 way up, separates, fixed to lower half on either side. .2 Round silver grate insertClunes Rifle Club, presented by J. W. Preston Esq. Won by R. Anderson August 1889clunes rifle club, anderson, j w preston esq

Clothing. Infant's coffee coloured crocheted lace bonnet. Concentric circles of lace from centre back. Edged on both sides with scalloped lace. Fully lined with coffee coloured net. Two rows of .8 cm blue satin ribbon and two rows of .8 cm pink satin ribbon threaded from side to side. Four pink rosebuds across front edge of bonnet. Rosettes of pink and blue ribbon on each corner above ties of cream coloured silk ribbon.costume, children's, infant's coffee coloured bonnet

Clothing. Girl's pink silk and lace dress with short kimono cut sleeves. Square neckline edged with coffee coloured lace. Sleeve hems edged with coffee coloured lace. 12 cm diameter circular lace inserts below neckline front and back and over each shoulder. Horizontal decorative lace pieces 4 cm X 26 cm on each hip with skirt gathered underneath the lace. Rosettes of pink and blue ribbon at each edge of the lace with three satin ribbons attached and falling to the hemline. Hem is edged with 4 cm coffee coloured lace. Unlined.costume, children's, girl's pink silk and lace dress

Ceremonial purple velvet collar with gold metallic bullion fringe to outside edge and gold metallic ribbon and ribbon lace to all edges. At each end is a five point star in gold zardozi work in sequins and metallic thread with central couched button. Above the stars on the LHS is couched zardozi work initial G and on RHS couched zardozi work initial M and above these are two identical five point stars as lower ones with the addition to each of two metallic thread tassles. At the bottom centre of the collar are two small rings. In a separate bag is a purple velvet rosette with central sequined button and braided surround with large tassle all in gold metallic thread.ceremonial collar, grand master

A bodice belonging to the family of George Ward Cole in the late 1800s. George Ward Cole was an early member of the Victorian Parliament and the family featured prominently in Melbourne Society in their time. They established a substantial home known as “St Ninians” at 10 Miller Street in 1841. The family reportedly entertained Melbourne’s first Royal visitor The Duke Of Edinburgh, Queen Victoria’s second son, at St Ninians in 1867. In later years St Ninians was subsequently subdivided and later demolished. A hand sewn cream silk satin evening bodice from c.1865. This bodice features a very low, wide scooped neckline with a set in sleeve and four small pleats across the head of the shoulder. The elbow length, straight fitted sleeves are trimmed with a pleated ruffle that extends around the arm finishing at the elbow crease at the inside arm and tapering to mid forearm length at the back. The fitted bodice, lined with waxed linen, fastens down the centre front with eight covered buttons of the bodice fabric. The front two panels wrap around the sides of the bodice to meet another series of panels creating a princess line with a delineated central spine. The waist position is just below the natural waist at the sides, tapering to an elongated front covering the belly. From the sides towards the back it curves up to the natural waistline and then down again to a central point. The bodice is decorated with strips of the same fabric, which has been tucked, pleated and padded to create ruching. The ruching edge has a multi coloured thread, suggestive of rosettes, on both sides. In the front of the bodice, a strip runs down the centre front, concealing the buttonholes, and finishing at the elongated point. It then goes up the bodice over the bust line where it meets the neckline. It follows the neckline around the nape of the neck and back down the front over the bust line to the centre front. More strips run around the base of the fitted sleeve near the elbow above the ruffle. The rosette like coloured thread finishes the base of the ruffle. st ninians, george ward cole, bodice, late 1800s, brighton, margaret morrison ward cole

This model of St. John’s Presbyterian Church in Warrnambool was made by Johan Carl August Landmann (1826-1920). August Landmann and his wife, Christina came from Silesia to Australia in 1854. They settled in Warrnambool where August made a living as a carpenter and joiner. At first he rented shops in Timor Street and then built a two-storeyed shop and residence in Henna Street. Landmann built many of the early commercial buildings and residences in Warrnambool and he and his family were associated with the management of the Warrnambool Western Brewery. When he retired in 1900 he built another residence in Mickle Street and it was at that time that it is believed he made the model of the Presbyterian Church and the model of the Ozone Hotel (which is in the Warrnambool Art Gallery today). St. John’s Presbyterian Church, designed by Andrew Kerr, was built in the English Gothic style and opened in 1875. It was destroyed by fire in 1920 but was rebuilt to a similar style. This model is of great significance for two reasons: 1. It was made by a prominent early Warrnambool carpenter and joiner, Johan Carl August Landmann. 2. It is the only known model of the Warrnambool St. John’s Presbyterian Church which was destroyed by fire in 1920.This model is on a wooden stand or base which is painted black with metal screws. The edging of the stand contains straw which is now brown but was originally green to resemble grass or lawn. The church is a wooden structure (hollow inside) with some sections painted to resemble sandstone. The roof is slanted and painted grey and has six dormer windows or ventilation pieces on each side. The main body of the church has a nave with dual arched windows, the west end has dual arched windows and a door with louvre ventilation and the east end has a door and dual arched windows and two conical-shaped finials. The windows, some of which are triangular, have frosted decorated glass. Some of the glass in the windows is missing. The main tower is square-shaped with four conical-shaped finials. The upper part has four sets of louvres and two arched windows. The centre and lower sections have rosette patterns and several sets of dual arched windows with frosted decorated glass panels. The north east corner has a smaller tower.johan carl august landmann, st. john’s presbyterian church, warrnambool, warrnambool history

Items in the collection re Ian McLeod RWAFF, refer Cat No 2262.2 for service details.1 Badge silver inscription and crowned eagle. gold anchor and chain in centre. 2 Badge silver bottom half is a shield top half is a crowned eagle with wings outstretched. 3 Badge gold square on a gold square off set 45 degrees in centre is a lion the rear surrounds are two crossed swords. 4 Copper badge of an eagle with large crown there is an enamel white cross in centre of a red enamelled oval the birds claws are holding a lanyard. 5 Copper shield with cross rifles in it there is numbers 64 in red enamel circle in centre a crown is between. 6 Plain star 5 point 3 cm wide 7 grey cloth silver engine the bottom has British coat of arms. 10 cm x 5 cm. 8 Uniform. Black cloth rad binding has gold 3 pips, crown with red cross. crown gold thread. copper button. 9 Cloth rosette green centre white red surrounds 5 pointed brass star number 9 in centre surmounted with a crown.badges, collection, foreign

For Service History refer Cat No. 7877.61. Jacket - dark blue wool/polyester fabric. Battle dress style. Collar, shoulder epaulettes with Sqn Leader rank slides - 3 rank stripes, black and blue ribbons and 'AUSTRALIA" . Left sleeve insignia patch - white embroidery Eagle wings over "AIR FORCE" . Two patch pockets with concealed button flap. Right pocket - metal RAAF Badge, above pocket metal name badge. Left pocket - above service ribbons, blue and yellow ribbon with three rosettes - Long service. Black, red and white ribbon - Defence medal. Stretch ribbing waistband to jacket with plastic and metal zipper closer. Dark blue colour polyester lining with concealed pocket Dark blue plastic buttons with shank, raised emblem crown and wings RAAF. White cotton manufacturers label. 2. Cap - dark blue wool/polyester fabric. Utility cap style with Officers Insignia patch - gold embroidery - Queen's crown with red insert, wings and laurel leaves. Dark blue colour polyester fabric lining. White cotton manufacturers label inside on lining.Manufacturers information - black ink print. 1. "ADA/VIC 2002/ ^/ NSN: 8405 66 146 8842/ SIZE: 105r/ SERVICE NO:/ NAME: / LAUNDRY INSTRUCTIONS/ 50% WOOL 50% POLY/ DRY CLEAN ONLY/ REPRESS WITH DAMP CLOTH/ WARM IRON/ DO NOT SIRO SET/ MADE IN AUSTRALIA" 2. "ADA/ 4500 107475/ JULY 02/ NSN 8405 66 146 6323/ SIZE 62/ SERVICE NO:/ NAME: / DRY CLEAN ONLY/ 50% WOOL 50% POLYESTER/ MADE IN AUSTRALIA" 1. & 2. Handwritten - black ink pen "S.WRIGHT".uniform, raaf, battle jacket, cap, s. wright

Beautiful soft cream silk dress, with a random silk embroidered three petal flower over the fabric. Round neckline with overlaid square yoke of embroidered lace on a net background. Two 7cm wide bands of the lace are gathered over the shoulder armhole edge. These frills, and the scalloped edges of the front and back lace yoke are trimmed with 4 cm long decorative silk tassels.(one missing). Long sleeves, tapered in at the wrist are trimmed at the wrist with a 4.5cm wide band of lace, part of which is threadedwith two rows ofsoft pink silk ribbon insertion. Soft pink silk, folded into three 2.5cm tucks-overall width 6cm trim the high waistline, with a 7cm diameter rosette at the left front, and a bow(?), and tails, trimming the back waistline. This is severely damaged. Four metal hook and loops fasten the back lace collar, and nine metal hooks and eyes fasten the bodice. Bodice and sleeves are fully lined. Bodice is boned with thirteen 12-4 cm long ''bones''. Skirt is in two tiers; Top is 38cm deep, and made from the plain embroidered silk. A 5cm deep band of lace, with scalloped edges then joins the 36 cm deep ;lower panel of beautifully embroidery and pulled threadwork. Hem is faced, and finished or hemmed with french knots. Dress , which is hand stitched is fully lined with cotton. The lower 36 cm deep tier of the underskirt is trimmed with three .5cm tucks, and two 8cm bands of cutwork lace in a floral and geometric pattern. An oval shaped pocket is sewn into the front of the ''petticoat'' lining. This pocket contained some plant material, included in attached bag.costume, children's, cream embroidered silk and lace dress

The early settlers of Victoria depended on horse drawn vehicles to farm, make roads and railways, deliver produce and transport people. Horse harnesses were an important requisite for all drivers and could be found wherever there were working horses. Horse Harnesses have played an essential role in different cultures throughout history. Simple, utilitarian horse harnesses made of leather straps and iron rings were being used in early China before AD 500 as well as ancient Greece and Rome, allowing horses to pull chariots and ploughs. The Greeks and Romans were the first to use a "horse collar" which distributed the weight of the harness evenly across the horse's chest rather than relying on a "throat harness" that could damage a horse's throat or choke them. During the medieval period, European horse harnesses became more elaborate and decorative. Variations of different horse harnesses were also found in Native American and Middle Eastern cultures. Horse Harnesses usually have four basic components which include - 1. Communication - the bridle, bit and reins allows the driver to communicate instructions and commands to the horse, guiding its movement and direction. 2. Draft - the collar, hame straps, hames, traces and chains enables the horse to draw and pull the load efficiently by distributing the weight and transferring the pulling force to the vehicle. 3. Stopping - the breeching band, pole straps and breast strap helps to control or stabilise the horse and vehicle when moving downhill or stopping. 4. Support - the back pad, backband, belly band and back saddle keep the harness in the correct position and proper alignment. This show harness was used by Mr. Andy Bourke when showing his Clydesdales at shows or demonstrations. Although a more modern example with decorative embellishments, it still has many essential components traditionally found in an everyday working horse harness. The original purpose of the "housen" for example, was to run rain or drizzle off the horse's neck when they had to work in wet conditions - it was laid flat for this purpose on the top of the collar. Nowadays it is purely for show and is often used to advertise a business or stud. Horse brasses and fly terrets were fastened to various parts of a horse's harness. In the early days they probably began as amulets to ward off evil and to bring good luck and continued to be used as a festive decoration. The heyday of horse brasses was between the years 1851 and 1900. Horse brasses are fastened to various parts of the harness with many of their designs being symbolic. The ornamentation on this harness (although not authentic horse brasses) are based on the horse brasses that were popular in the 19th century. This horse harness is a significant example of the equipment that was needed wherever heavy horses were being used - particularly in the early years of Victoria's settlement by white settlers. Harnesses such as this example were used with stage coaches, drays, farming equipment, delivery carts and personal transportation.A leather and metal horse harness used when showing a Clydesdale (or other breed of heavy horse). It is made up of a number of components. 1. Decorative leather cart saddle with two large cloth pads underneath (which have a scalloped leather and stud border), a raised leather pommel and a silver and red coloured metal back strap holder across the top. It has two symmetrical sets of ornamentation (silver hearts and circles) in the front and a wide strap or girth (with a maker's stamp reading "R. Mitchell Saddler") and buckle which attaches the saddle to the horse. 2. Pair of steel hames which are gently curved (to fit on a horse collar) and are topped with steel knobs. They have several steel rings and lugs (to hold straps and chains) and a "Made in England Warranted Steel" stamp. 3. Breeching harness which consists of a number of leather straps, chains and metal rings including a wide padded leather strap with a scalloped edge that sits on the back of the horse and a thick leather strap that goes around the hind quarters of a horse which is joined to the back strap with four shorter vertical straps and buckles. These straps feature silver and red patent leather trim and silver heart shaped ornamentation. The strap also features the maker's stamp of "R. Mitchell". 4. Decorative leather bridle with blinkers featuring the same silver and red patent leather trim on the cheek piece, brow band and throatlatch. It has a stainless steel "Liverpool Driving Bit" with a curb chain, a variety of decorative silver ornaments (rosettes, diamonds plus a heart and two circles) on each end of the forehead band, dropper and strap as well as a silver metal bell (sometimes known as a "fly terret" or "swinger") that sits on the headpiece of the bridle. 5. Leather "violin shaped" dropper (or hanger) with two silver rosette shaped ornaments and a stainless steel clip on the top 6. Stainless steel "Liverpool Driving Bit" with a straight mouthpiece which is ribbed on one side. It has three rein spots (spaces) and a curb chain. 7. Leather arch shaped "Housen" covered in black and red patent leather and decorated with silver studs (some spelling out F H) and bordered with a red fringe. It has a leather strap at the back and two leather loops on the front. 8. Leather padded backband (Australian style "Stallion Draught Roller") decorated with two groups of nine metal "horse brasses" or harness ornaments displaying horseshoe, starburst and horse head designs on blue, red and white striped webbing. The backband has three notched straps at each end, a buckle near the centre and the initial B stamped in two places underneath. 9. Bellyband made of leather and red, white and blue striped webbing. It has a set of three buckles at each end (which correspond with the notched straps of the backband). 10. Wide, thick leather strap which has a buckle and notches at each end. It also has the maker's stamp of "R. Mitchell Saddler". 11.One pair of long leather traces - each with a buckle and notched loop at one end, decorated with a small silver diamond shaped harness ornament. 12. Length of stainless steel heavy duty chain with two swivel connectors.Saddle - "R.MITCHELL / SADDLER" Hames - "MADE IN ENGLAND / WARRANTED / STEEL" "MADE IN ENGLAND / WARRANTED / unclear" Breeching Straps - "R. MITCHELL / MAKER / R. MITCHELL MAKER" Housen - "F H" Backband "B / B' Wide leather strap - "R. MITCHELL / SADDLER"flagstaff hill maritime museum and village, warrnambool, great ocean road, shipwreck coast, harness, horse harness, show harness, clydesdale horses, andy bourke, horse drawn cart, housen, bridle, hames, breeching straps, dropper, bit, liverpool bit, backband, harness ornamentation, bellyband, back saddle, fly terret

Items in the collection of SQD LEADER "SHANE WRIGHT". Enlisted RAAF 1982 Regiment number 0323963/ 8194842. Became radio technician on Electrical systems on Orion and F111. 1990 became Electrical Systems Specialist promoted to Sgt. 1996 Commissioned as an Officer. Postings: HQ Logistic Command. Aerospace Equipment Systems. OTS as Specialist Military Training Flight Command. 2005 Promoted Sqn Leader. Posted Executive Officer RAAF Williamtown. 2018 Discharged from RAAF.1. 2. 3. Service dress style, dark blue colour wool/polyester fabric. 1. Jacket - collar, four front patch pockets with button down flap. Buttons - gold colour plastic with shank and raised emblem - crown and wings - RAAF. On right pocket, metal RAAF Badge, above metal name badge. Above left pocket - service ribbons. Blue and yellow ribbon - long service with three rosettes, black, red, white ribbon - Defence medal. Sleeves - three rank stripes, black and blue ribbon. Lining - dark blue polyester fabric with concealed pocket. White colour cotton/polyester fabric. Manufacturers label inside left side. 2. Belt - fabric with gold colour plastic buckle with dark blue plastic buttons and strap belt keepers. 3. Trousers - waist band with belt loops, fob pocket, two side pocket and one inset back pocket. Nylon and metal zipper fly and metal closer. Lining - dark blue polyester fabric to waistband and pockets. White colour cotton/polyester fabric. Manufacturers label on back pocket lining.. 4. Shirt - light blue cotton/polyester fabric. Long sleeves, collar, shoulder epaulettes with fabric rank slides - 3 stripes, black and blue ribbon - Sqdn Leader. Top left sleeve - dark blue and white oval shoulder patch, embroidered - wings and "AIR FORCE". Clear plastic buttons. Manufacturers label - illegible. 5. Tie - dark blue colour necktie. polyester/wool. 6. Cap - peaked, Service dress Officer, dark blue colour fabric with black cloth band around exterior of cap. Black colour patent leather chinstrap secured by two gold RAAF buttons around the front half of the brim. RAAF badge on front, Queens Crown with red insert over gold coloured wings over laurel leaves. Interior - black sateen fabric with clear plastic lining. Brown leather look sweatband, White cotton manufacturers label.Manufacturers information - black ink print. 1. "A73/ADA/VICTORIA 2003/ NSN:/ NAME: / SERVICE NO:/ 70% WOOL, 30% POLYESTER/ LAUNDRY INSTRUCTIONS/ DRY CLEAN ONLY/ PRESS ON ORIGINAL CREASES/ USE DAMP CLOTH OR MEDIUM/ TO HOT STEAM IRON/ MADE IN AUSTRALIA" 3. "A72/ADA/ VICTORIA 2003/ NSN:/ NAME: SERVICE NO:/ 70% WOOL 30% POLYESTER/ DRY CLEAN ONLY/ MADE IN AUSTRALIA" 1. 3. Handwritten blue/black ink "S. WRIGHT/ 40594" 5. Black label white embroidered print "NOONE/ IMAGE WEAR/ MADE IN / AUSTRALIA/ 2002" 6. "MOUNT CASTLE PTY LTD/ BRISBANE 1999/ SIZE 59^". Handwritten black ink "S. WRIGHT"uniforms, raaf, service dress, shane wright

White, blue and grey soft covered book. The contents include: Global Innovation Centre, university of Ballarat Technology Park, David Caro, Kerry Cox, Peter Mathews, Sally Wellard, Frank Hurley, Rosalyn Schute, John Smyth, Colin Bourke, honorary doctorate, Alan Webb, William McGregor, Julian Lowe, John Edwards, International Beer Awards, Camp Street, Miwako Inoue, Ballarat Technology Park, earn as you learn. .3) Financial Statements 2003university of ballarat, annual report, david caro, kerry cox, sally wellard, jim burrough, frank hurley, pater mathews, rosalyn schute, colin bourke, w. john smyth, honorary doctorate - alan kenneth webb, william mcgregor, bill mcgregor, national centre for sustainability, international students, bul ayuel bulkoch, lucy caniogo, harmohan singh, thim lai, pernilla honor'e, tom bodey, university of ballarat pipe band, bruce morgan, gillian hehir, trevor hastings, cameron sultie, leigh pyke, peter ocic, rosette arnold, robert hook, john brumby, stan jeffrey, sarah birks, john o'loughlin, leeanne pitman, kim sumner, chris grant

Contains extensive amount of advertising by Melbourne businesses Cream paper that has discoloured with age, printed both sides in black and folded in four, to produce eight faces.anzac rosettes