Pair of Denzil Don men's spike soled tennis shoes. Materials: Leather, Metal, Cottontennis

A metal object with hook piece protruding from the bottom of the Candle holder. At the bottom there is a spike at one end of the holder and a circular end at the other . Near the flat circular end there is a cylinder shape to hold a candle. The object sits on the spike and the hook protrudes abovecandle spider, mining

Plaque with metal railway bridge bolt and 2 metal railway line spikes.Spikes have lip on top to hold rail lines down with chisel shaped ends to by driven into sleepers. Metal bolt used to hold railway sleepers to bridgesNo markings on spikes or bolt. Plaque brass plate engraved-: BURMA RAILWAY BRIDGE BOLT & RAILWAY SPIKES Recovered 1987 By Ex P.O.W V.X. 30397 BILL TOON Approximatly 7,000 Australians Lost Their Lives Building This Railway Line 1942-1945.

Items in a collection relating to Edward Judd, refer Cat No 7410 for his service details.1. The main body is a 'U' shaped section, with an extension going out further (4cms). At the end if that extension is a small spiked wheel that rotates. The spikes are approx 3mm long. Other accessories on the spur frame are two leather straps of width 1/2" (12.5 mm) and a pivoted buckle permanently on one side of the spur frame. 2. Same as No. 1 except the spikes are missing at the end of the spur and part of one strap is missing.horse equipment, saddlery, spurs

German Luftwaffe (Land Forces) minefield warning flag from WWII.originally intended to be gas markers, rather than mines, but as it turned out, the use changed .they were mounted on a red metal pole & there were 12 to a set in a leather pack. This Flag was presented to the Treasurer of Waverley RSL. It is a souvenir from Bardia in Libya The Battle of Bardia was fought over three days between 3 and 5 January 1941, as part of Operation Compass, the first military operation of the Western Desert Campaign of the Second World War. It was the first battle of the war in which an Australian Army formation took part, the first to be commanded by an Australian general and the first to be planned by an Australian staff. Major General Iven Mackay's 6th Division assaulted the strongly held Italian fortress of Bardia, Libya, assisted by air support and naval gunfire, and under the cover of an artillery barrage. The 16th Infantry Brigade attacked at dawn from the west, where the defences were known to be weak. Sappers blew gaps in the barbed wire with Bangalore torpedoes and filled in and broke down the sides of the anti-tank ditch with picks and shovels. This allowed the infantry and 23 Matilda II tanks of the 7th Royal Tank Regiment to enter the fortress and capture all their objectives, along with 8,000 prisoners. In the second phase of the operation, the 17th Infantry Brigade exploited the breach made in the perimeter, and pressed south as far as a secondary line of defences known as the Switch Line. On the second day, the 16th Infantry Brigade captured the township of Bardia, cutting the fortress in two. Thousands of prisoners were taken, and the Italian garrison now held out only in the northern and southernmost parts of the fortress. On the third day, the 19th Infantry Brigade advanced south from Bardia, supported by artillery and the Matilda tanks, now reduced in number to just six. Its advance allowed the 17th Infantry Brigade to make progress as well, and the two brigades reduced the southern sector of the fortress. Meanwhile, the Italian garrisons in the north surrendered to the 16th Infantry Brigade and the Support Group of the British 7th Armoured Division outside the fortress. In all, some 36,000 Italian prisoners were taken. The victory at Bardia enabled the Allied forces to continue the advance into Libya and ultimately capture almost all of Cyrenaica. In turn this would lead to German intervention in the fighting in North Africa, changing the nature of the war in that theatre. Bardia boosted the competence and reputation of the Australian Army. Perhaps most important of all, it raised confidence in the possibility of an ultimate Allied victory around the world, which would lead to the Lend-Lease Act being passed in the United States http://en.wikipedia.org/wiki/Battle_of_BardiaCloth Flag bearing a skull and cross Bones on a metal spike mounted on a square varnished wooden basebardia, land mine, marker flag, minefield, mustard gas

This splicing tool is handmade on a forge. It is used for splicing in fibre and wire rope work to form a semi-permanent joint between two ropes, or parts of the same rope or steel cable. The rope is partly untwisted and then the strands are interwoven. Splices can be used to form a stopper at the end of a line, to form a loop or an eye in a rope, or to join two ropes together. Splices are preferred to knotted rope; a knot typically can reduce the strength by 20–40%, but a splice is capable of attaining a rope's full strength. This homemade, handmade splicer is an example of a tool used to splice a cable or rope, a craft that was in much need onboard a sailing ship. Splicing tool; a spike on one end and a flat blade on the other, with goose-neck centre for leverage. Handmade.warrnambool, shipwreck coast, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, splicing tool, rope work, rope strands, knot making, netting, net making, sailmaker's tool

Hook for bales or sacks with metal curved spike & wooden handle with hole. 17.5mmL handle & 24.5mmL overallflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

James S Steele tool boxCaulking tool spike. Has been broken and repaired. 132mm long. Blade square 19mm wideflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Letter spike Height 9" Has copper base with patina on copper, appears to have been varnished. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, letter spike

Book, 168 pages, soft cover. Front cover has an image of grass & trees over which is an image of a lady with glasses. Print is white & red ink. Illustrated with photos, maps & drawings.Donated by C & J Rotering. To Spike Best Wishes from 'A Girl in Changi' Sheila Allan Sept 1995.books, military, history, diaries

Pocket Knife, folding 2 bladed all metal with copper loop on end & spike on back. Bone handle.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Hand made axe with spike on one side and blade on other. Has a wooden handle that has been carved.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Mother of pearl finish on pocket knife blade. Shoe button hook, cork screw, spike and small loop.knife, pocket knife tatura

Used at the Moorooduc Station opening ceremony 14th Septembers 1991. Shire Presidant Councillor Pat Leech perfomed the striking of the Pin. The Pin was later removed for posterity and to be re-used when the line is re-opened to Baxter.Only one ever produced specifically for MRPS.Stained timber box of 200x40x50mm with maroon silk lining containing a gold plated rail dog spike/pin.No inscriptions of memorial plates. Striking marks and withrawing marks present with mild tarnishing.mrps, mornington railway preservation society, moorooduc station opening ceremony, 14-sept-1991, rail dog pin

This hat pin stand would have been a common object in a woman’s bedroom in the past, especially about the end of the 19th century and the beginning of the 20th century when women wore large hats and they needed large pins to hold them in place. This hat pin holder has no known local provenance but it is kept as a memento of the past and will be useful for display.This is a silver-coloured metal stand with a round base with impressed patterns on the top and a central raised oval section containing a circular spike. Near the top of the spike is a circular-shaped piece of metal in a fretwork pattern. This fretwork has been welded on and has space to insert several hat pins women’s accessories, history of warrnambool, hat pin stand

These thread spools come from the Fletcher Jones Factory in Warrnambool. They would have been used in the sewing and manufacture of the men's and ladies' garments made at the factory. The Fletcher Jones factory was established by David Fletcher Jones in 1948. David Fletcher Jones (1895-1977) set up as a travelling hawker selling drapery in the Western District in the 1920s. In the same decade he opened a shop in Warrnambool manufacturing men's clothing, specialising in the production of men's trousers. In 1946 a Fletcher Jones shop was opened in Melbourne and a company, Fletcher Jones and Staff, was established in 1951. The company expanded to manufacturing both men's and women's clothing, opening outlets in all States and becoming well-known Australia-wide. The company was dissolved in 2011 and the Warrnambool factory was sold.These items are of interest as a memento of the Fletcher Jones Factory and the Fletcher Jones company, one of the most important businesses ever established in Warrnambool and certainly one of the most cherished by the local Warrnambool community..1 A wooden stand with upright spikes holding 11 spools containing coloured thread (various colours). The threads are on blue and black plastic reels. .2 A wooden stand with upright spikes holding 16 spools containing coloured thread (various colours). The threads are on blue and black plastic reels.fletcher jones and staff pty ltd, fletcher jones factory warrnambool

All objects supposedly brought from somebody near the site of the Thai Burma Railway..1) Rusted metal bolt. .2) Rusted metal spike. .3) Rusted bent piece of metal with pointed ends.equipment, railway, burma

Wooden log with iron spike - part of the deck of the "Joseph Scammel" which sank off Point Danger, Torquay 1891.joseph scammell, timber with iron spike

The Wodonga Historical Society Haeusler Collection provides invaluable insight into life in late nineteenth and early twentieth century north east Victoria. The collection comprises manuscripts, personal artefacts used by the Haeusler family on their farm in Wodonga, and a set of glass negatives which offer a unique visual snapshot of the domestic and social lives of the Haeusler family and local Wodonga community. The Haeusler family migrated from Prussia (Germany) to South Australia in the 1840s and 1850s, before purchasing 100 acres of Crown Land made available under the Victorian Lands Act 1862 (also known as ‘Duffy’s Land Act’) in 1866 in what is now Wodonga West. The Haeusler family were one of several German families to migrate from South Australia to Wodonga in the 1860s.This item has well documented provenance and a known owner. It forms part of a significant and representative historical collection which reflects the local history of Wodonga. It contributes to our understanding of domestic and family life in early twentieth century Wodonga, as well as providing interpretative capacity for themes including local history and social history.A long slender instrument turned from ebony (wood). A twist top cap at one end can be removed to reveal steel spikes in the body of the instrument. A thin handle at the opposite end of the instrument can be pushed inward to move the steel spikes out of the body of the instrument. There is cotton stored in the instruments cap.Nonemedical history, medical, medicine, disease, healthcare, health, medical instrument, medical equipment, haeusler collection, nineteenth century medicine, 19th century

Wood auger often used to drill holes for bridge decking spikes.Wood auger with handletimber tools

This copper nail, sometimes known as a ‘Dumpy Bolt’ or spike, was salvaged from the hull of the wreck of the “George III”. It dates back to at least 1810. It was found by an abalone diver on the south east coast of Tasmania. The nail would have been used to hold the layers of the ship’s keel frame and the planking together. The nail has been passed from the abalone diver to an interested business man on a trip to the south of Hobart, on again to the business man’s close friend who then donated it to Flagstaff Hill Maritime Village. The metal of nails such as this one, after being in the sea for a long time, become affected by the natural reaction of the sea water, causing it to degenerate and thin, and the stress from the force of the sea over the years alters its shape. Iron nails had been used on ships previously, but they quickly corroded in the salt; ships needed regular, costly and time-consuming maintenance to replace the iron nails. Towards the end of the 18th century the British Navy trialled the use of copper nails, finding them to be very successful. Merchant ships began to adopt this process in the early 19th century, although it made ship building very expensive and was more often used for ships such as the “George III” that sailed on long voyages. The three masted sailing ship “George III” was a convict transport ship built in Deptford, England, in 1810. On 14th December 1834 she left Woolwich, England, bound for Hobart Town, Van Diemen’s Land (Tasmania), under Captain William Hall Moxey. She was carrying 220 male convicts plus crew, guards and their families, totalling 294 persons (another 2 were during the voyage). Amongst the cargo were military stores including several copper drums of gun powder. On 27th January 1835 the “George III” was near the Equator, about half way into her journey. A fire broke out and the gun powder was in danger of explosion, threatening the whole ship. Two convicts braved the heat and smoke, entered the store and seized the gun powder drums, suffering burns for their efforts but saving a probable disaster. The fire destroyed some of the provisions and food was scarce. Many became ill with scurvy and some died during the journey. Nearing the end of their journey on 10th April 1835 the “George III” was headed through the D'Entrecasteaux Channel, south east Tasmania, between the mainland and Bruny Island. She was sailing in the moonlit night to hasten her arrival in port due to the great number of sick on board. She struck uncharted rocks, known only to the local whalers, between Actaeon Reef and Southport Lagoon and within hours began to break up. The ship’s boats were used to first rescue the women and children. Firearms were used to help quell the panic of the convicts below decks and some were killed by the shots. Many convicts, including the sick, were drowned. In all, 133 lives were lost including 5 of the crew, guards and their families. It was the third worst shipping disaster in Tasmanian waters. A monument in honour of the prisoners who perished in the “George III” has been erected, noting the date of the wreck as “Friday 10th April 1835.” (NOTE: there are a few differences between sources regarding dates of the shipwreck, some saying March and others April 1835. There are also differences in the figures of those on board and the number of lives lost.) The copper nail is significant as an example of sailing ship construction; fasteners used in the early 19th century on ships carrying convicts to Australia. The nail is also significant for its association with the ship “George III”. The “George III” is registered on the Australian National Shipwreck Database, ID 7195 as an Historic Shipwreck. She is the third worst shipwreck in Tasmanian waters. She is also associated with Early Australian History and the transportation of convicts to Australia. The incident of the fire on board and the bravery of the convicts in making the gun powder safe is an example of the social character of the people in early Tasmanian colonisation. Copper nail (also called a Dumpy bolt or spike) from the convict ship George III, wrecked in 1835. Nail is long, bent in an ‘L’ shape about 3/5ths along, tapering from both ends to the bend. Both ends are flat and do not taper to a point, nor have a thread. The shorter end has been polished, showing bright copper. There is pitting along the nail and virdigris is evident on the longer, unpolished end. The nail is displayed with the longer section resting on a wooden board between two ‘U’ shaped uprights, the shorter section upright. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, george iii, ship construction, ship nail, 1835 shipwreck, 19th century shipwreck, william moxey, d'entrecasteaux channel, convict transportation, copper nail, dumpy bolt, spike, keel nail

Standard pattern of clasp knives issued since before the Second World War. Part of the Kevin John Herdman, No. 397661, Collection. See Catalogue No. 5942P for details of his service record.Stainless steel construction clasp knife consisting of a blade, a can opener, a screwdriver, and a spike. The knife is attached to a khaki coloured lanyard.Stamped on the side of the knife: “WHITTINGSLOWE OPENER, 15737, PAT. APPN., ADELAIDE, D (upwards arrow) D”clasp knife, equipment, kevin john herdman

8481.1 - "T" shaped piece of rusted metal, the "arms" being two half-cylinders and the "body" connecting them into a spike at the end.

Set of three colour photographs of testing the installation of screw spikes in the depot trackwork prior to the Wendouree Parade trackwork. Photos taken on 8/3/2003, printed on AGFA paper. 2554.1 - Gary Wood, John Shaw and Alan Snowball as a group. 2554.2 - Screwing a spike in with motorised impact tool. 2554.3 - Using an electric impact tool.trackwork, screw spikes, depot fan

The photograph has the information written on the back. It states it is the Senior Athletic Team Champions Herald Shield 1919 Same image was reproduced in the SMB Students' Magazine 1921 with the caption "SMB Athletic Team 'Runners-up in Victorian Inter-Technical Schools' competition for the Herald Shield, 1920"A formal group photograph of 10 adolescent males in sporting attire. Footwear with spikes. A studio photograph Mounted on cream coloured ornate boardHandwritten in ink on back. "Senior Athletic Team Champions Herald Shield 1919. List of names and position of studentsathletic team, herald shield, champions, runners-up, harold maddison, a mccallum, harold wakeling, frank larkin, noel hoy, reginald wilson, 'buck' rankin

8412.1 - Metal spike with extensively hammered flared end, and a tapering tip that shows signs of being sharpened: the very ground to a new angle.

8411.1 - Long, narrow metal spike with tapered tip, broken at the very end. Shows slight flaring from hammering at blunt end.

Used for collection animal fat in order to make candles.Very heavy large rusty round pan with a handle and blunt metal spikes. Around the edge is a narrow lip with a small pouring spout.social history, candles, farms, equipment, george evans collection