Previous owners: T. H. Smith, T. W. SmithNo. of volumes: 20 Volume range: Vol. 1 (1865-1866) - Vol. 20 (1875)law reports; digests; etc--great britain--cases, bankruptcy--great britain--cases, equity--great britain--cases

Clipping with publication title and date. Second clipping about Jean McCaughey [23rd Victorian Governor's wife] attending a luncheon at ANZAC House given by Returned Nurses' Club as a guest of then president B C Lawson.Newspaper clippings attached with sticky tape to a piece of paperjean mccaughey, returned nurses' club, b c lawson

This medical / hospital instrument was used in the Tawonga District General Hospital which was built in the 1950's specifically for the increase in population due to the Kiewa Hydro Scheme.Historical: Shows the development of scientific hospital equipment. Provenance: Used in the Tawonga District General Hospital which was remote and therefore required good equipment. Good condition and good interpretation capacity.Steel vice with 5 rods at right angles to the bottom plates and a handle on the opposite side attached to the square shaped rod. The handle is covered with a wooden hand piece enabling this square shaped rod to be rotated for winding bandages. The other 4 rods are cylindrical. The handle of the vice can be screwed down to fit onto a table or bench.Handle of the vice: '2697'bandage winder, medical, hospital, tawonga district hospital

The Blacksmith could take this portable 'leg vice' and make repairs away from his forge.He could mend wheel bands, tools, farm equipment and also fine tune generic sized horseshoes on site. He would build a fire and secure his leg vice to a stable point thus allowing him to work on any heated metal as required. A Blacksmith was an essential person for the maintenance and making of farm and household equipment, and shoeing horses, in the pioneer settlements of Brighton, Moorabbin, Cheltenham c1900Blacksmith's 'leg' vice. Sturdy blacksmith leg, post (vice). 15cm jawsblacksmith, vise, moorabbin, bentleigh, brighton, market gardeners, forges, tools, early settlers, pioneers, ploughs, carts horse-drawn, anvils

Perak or State of Perak one of the 13 states of Malaysia, is the second largest state in Peninsular Malaysia. It borders Kedah and the Thai Yala Province to the north; Penang to the northwest; Kelantan and Pahang to the east; Selangor to the south, and the Straits of Malacca to the west. The state's administrative capital of Ipoh was known historically for tin-mining activities until the price of the metal dropped, severely affecting the state's economy. A vice is a tool with 2 jaws between which an object is gripped, usually by tightening a screw, so as to leave the hands free for working upon it. The vice is usually firmly attached to a bench . A steel vice THE PERAK TIN MINING COMPANYtools, vice, steel , clamps, metalwork, woodwork, carpentry, early settlers, pioneers, market gardeners, moorabbin, bentleigh, cheltenham, blacksmiths, perak tin mining co.

The Ballarat School of Mines often exhibited student work during Apprenticeship WeekBlack and white photograph of Ballarat School of Mines Student work exhibited at Alfred Hall, Ballarat. The display features (bottom left to right) a 34 inch vice, a swivel based machine vice, a drilling machine and a 3 ton screw jack. ballarat school of mines, tools, apprentice, jack, vice, alfred hall

This leg (post) vice once belonged to Goodall and Sons, who were blacksmiths in Terang. The leg vice is a common tool of the ‘smithies’ (blacksmiths). It is also an engineer's tool but in the early 1900s the smith was often the nearest approach to an engineer’s services for many miles around. The smith was called upon to do a variety of work. The leg vice is used to hold hot iron while the metal is pounded, heated and beaten again and again until it is the required shape. Henry Goodall (1870-1936) Henry Goodall was the proprietor of garages as H. Goodall & Sons Pty. Ltd., at both Terang (McKinnon and High Streets) and Mortlake (Dunlop Street). His business was in operation in at least in 1916 and perhaps well before, considering the date of the tyre bender and its use for wagons with wooden wheels. It was still in operation in 1953, chasing up debtors in Mount Gambier Court. Amongst the employees of H. Goodall & Sons Pty. Ltd. was Ernie Entwistle, a blacksmith (a soldier who died in 1916 ) and Alfred Hodgetts, radio expert (killed in a fatal accident in 1943, when he was in his early 30s ). Henry Goodall was involved in the community as a Justice of Peace, a deputy coroner, President of the Mortlake Hospital, trustee of the Soldiers’ Memorial Hall, and as a prominent Freemason. He and his wife had two sons (Charles and John) and one daughter (Mrs. Chas. Newton, of Skipton). The leg vice is locally significant as it was used by a local company in Terang and Mortlake in their blacksmith, wheelwright and garage business. It is an example of the tools of the blacksmiths’ trade in Victoria in the early to mid-1900s.Leg vice, also called a post vice. The large iron vice stands on a post on the floor and post brackets attach it firmly to a solid object such as a workbench. The sliding metal handle winds the screw spindle in and out to change the grip of the jaws that hold the workpiece. This leg vice once belonged to Harry Goodall & Sons, blacksmiths of Terang.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, h. goodall & sons of terang, terang blacksmith, h. goodall & sons pty ltd, mortlake, ernie entwistle blacksmith, alfred hodgetts radio expert, charles goodall, john goodall, mrs. chas. newton nee goodall, trade tools, blacksmith tools, leg vice, leg vise, pose vice, post vise, terang 1900s, warrnambool district 1900s

Michael Adermann was the University of Ballarat Deputy Vice-Chancellor (development)/Director of TAFE from c1997-27 January 2001. He was appointed Deputy Director at the Hunter Institute of Technology in Newcastle.Colour photograph of University of Ballarat Deputy Vice-Chancellor Michael Adermann.michael adermann, tafe, university of ballarat, university of ballarat, deputy vice-chancellor

Henry Disston (1819-1878) was born in England and later moved to America. He has been noted in a biography as a "Pioneer Industrialist Inventor". In 1840 he began making and selling his own saws in Philadelphia, USA, growing to become the world's largest saw manufacturer. Tools made by Henry Disston and his company have the reputation of being the finest tools money can buy.The saw sharpening vice and its shifting spanner are significant for their connection with Henry Distton & Sons, renowned for high quality hand saws and associated tools. In 1855 Henry Disston cast a crucible saw sharpening steel, the first person to ever do so in America. The hand tools are also important for their association with the early building industry. Saw sharpening vice with accompanying saw tooth shifting spanner. The vice has a ball and socket clamp. The top of the vice has a saw clamp with wide jaws. The metal surface has remnants of black paint. Inscription is cast into the jaws of the vice. It was made by Henry Disston & Sons"HENRY DISSTON & SONS"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, vice, saw sharpening vice, saw sharpening tool, saw tooth, shifting spanner, woodworking tool, henry disston, disston & co, hand saw, handsaw, hand tools, carpentry, boat building

One of a collection of over 400 photographs in an album commenced in 1960 and presented to the Phillip Island & Westernport Historical Society by the Shire of Phillip IslandPhotograph of a painting by F Wheatley National Portrait Gallery, of Vice Admiral Arthur Phillip standing on beach between water and rocks. Small boat with sailor nearby and ship under sail in background.Vice Admiral Arthur Phillip - first Governor of New South Wales. The man after whom Phillip Island was named.local history, photography, photographs, exploration, maritime, governor arthur phillip, arthur phillip, john jenner, bryant west

Rev. Djiniyini Gondarra 1986. Moderator Northern Synod and Vice President of Uniting Aboriginal and Islander Christian Conference.Head and shoulders portrait."Rev. Djiniyini Gondara, Vice President of Uniting Aboriginal and Islander Christian Congress"gondarra, djiniyini, uniting aboriginal & islander christian congress

Rev. Djiniyini Gondarra 1986. Moderator Northern Synod and Vice President of Uniting Aboriginal and Islander Christian Conference.Head and shoulders portrait."Rev. Djiniyini Gondara, Vice President of Uniting Aboriginal and Islander Christian Congress"gondarra, djiniyini, uniting aboriginal & islander christian congress

Rev. Djiniyini Gondarra 1986. Moderator Northern Synod and Vice President of Uniting Aboriginal and Islander Christian Conference.Head and shoulders portrait."Rev. Djiniyini Gondara, Vice President of Uniting Aboriginal and Islander Christian Congress"gondarra, djiniyini, uniting aboriginal & islander christian congress

Black and white photograph. 3 students standing and seated in the Ornamental Garden, with B. Dimelow, Vice-Principal. Probably the House Captains.On reverse, "1968 L-R Rear R.W. Boyle, G. Toyne, Front B. Dimelow (Vice-Principal), Kris Clough," and, "Photograph by Information Branch Victorian Department Of Agriculture Ref. No. D.1341." students, r.w. boyle, g. toyne, vice-principal, kris clough, house captains, publicity

Cyril Henry Woodford Kett FBOA FSMC (1890-1971) was one of the five people who signed the Memorandum and Articles of Association of the Australian College of Optometry in 1939. He was a councillor of the College from 1940 to 1970 and First Vice President 1944 to 1947. He was made an honorary life member of the College in 1954. He donated numerous items of historical interest to the College that provided the foundation of the Museum which now bears his name. It was painted by another optometrist, John Nathan.This painting is significant to the College as it is one of only ten portraits in oils of individuals who have been leaders in the development of the College.This framed oil painting shows Mr Cyril Henry Woodford Kett FBOA FSMC (1890-1971),Councillor and Vice President of the Australian College of Optometry, an important figure in Optometry in Victoria. It was painted in 1980 by another optometrist, John Nathan,and is signed by the artist at lower right corner: 'John Nathan'.Signed by artist at lower right corner: 'John Nathan'. Plaque on frame reads:'Cyril H W Kett FBOA(Hons) FSMC FVOA c1890-1970/ Councillor of the College 1940-1970/ Vice President 1940-42, 1944-47, 1948-50, 1954-70/ Chairman of Council 1944-1947/ One of the five signatories to the original Memorandum of Association of the Victorian College of Optometry'.optometry, painting, oil painting, portrait, cyril h w kett

The blacksmith leg vise is also called the "solid box vise" and is one of the most important tools in the blacksmith's shop. It firmly holds hot iron while it is hammered, chiseled, or twisted. These are the only vises that are designed to take this kind of use day in and day out. A small 30-pound blacksmith's vise can survive pounding that would wreck a much heavier cast iron bench model. Three things make a blacksmith's vice special. One is that they are forgings, not cast iron or ductile iron. The second is the leg that provides support to the floor or from a sunken post. The last is the hinge, while not a perfect way to construct a vice the pin joint is durable and can take a considerable beating. If sheared it is easy to replace. These things all combine into a tool that can take decades of heavy use and abuse. Most in use is one to two hundred years old.Some of these vises were made by specialists such as Atwood of Stourbridge England, Steel City and Columbian in the U.S. and others were made in anvil manufacturing plants such as "Mousehole Forge" and "Peter Wright" in England and "Fisher-Norris" and others in North America. The design of these vises right down to the last chamfer seems to have been perfected in the 1600s and remained more or less the same until the 20th century. The bodies are forged wrought iron or mild steel and they have hard steel surfaces welded into the jaws. The jaws have little or very shallow serrations which are generally worn off.Around the turn of the 20th Century during the hey-day of the blacksmith shop in North America, these tools were considered so standard a commodity that they were sold without reference to the manufacturer. Very few were even marked with the maker's name. Size is best defined by weight as there is some variation in jaw size from manufacturer to manufacturer. They were sold by the pound and are still best judged by the pound.A vintage tool used in a Blacksmiths shop during the early 19th century to the beginning of the 20th century. Regarded as a significant into social history of the time.Leg Vice attached with screws to bench via a block of wood. Has large metal pole which practically reaches the floor. Also has a metal device to either tighten or slacken vice.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Very old vice. The clamp is 50 to 60 years old when they were made by Technical School students in metal work class.Used by carpenters, woodworkers, furniture makers, welders, construction and metal workers in the Kiewa ValleyMathieson's Hand Vice, the smallest at 3 inches. Ref. Page 74 Tools for all Trades Catalogue. Small steel vice consisting of two parallel jaws for holding a workpiece. One jaw is fixed and the other movable by a screw. The clamp is used for holding a workpiece during hand operations eg. filing, hammering or sawing. Small steel clamp is a versatile tool that serves to temporarily hold work securely in place by screwing each jaw together.vice/vise tool, clamp tool, hand tools

Johnsonville Angling Club Officials at Junior Angling Competition showing Fred Clark President Lyn Barr Vice President Andrew Martin Secretary Treasurer Johnsonville VictoriaBlack and white photograph of Johnsonville Angling Club Officials at Junior Angling Competition showing Fred Clark President Lyn Barr Vice President Andrew Martin Secretary Treasurer Johnsonville Victoriaclubs, fishing, sports, recreation

Leg Vice medium sized metal vice bolted at one side to work bench. Has metal pole practically to ground. Has a device to either tighten or loosen vice.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Forsbreys Vice Press - rectangular shaped wooden bow tie press with metal chrome vice and screws.neckwear, neckties, presses

A file copy of a letter from Mrs Vasey of the War Widows Guild to Legatee Radford who was Vice President of Melbourne Legacy at the time. She says 'It was most heartening to read how staunchly you supported our idea that a man who dies in the service of his country should not leave his children to poverty and sub-standard living. Thank you very much indeed for speaking for us publicly in the unequivocal way you did." The War Widows Guild was founded by Mrs J M Vasey, the wife of Major-General Vasey. During the second world war she became secretary of the AIF Women's Association, a body which sought to help soldiers' wives. Her work with this body drew her attention to the plight of war widows. After Major-General George Alan Vasey died in an aircraft accident on 5 March 1945 she became a widow herself. At the end of the war Mrs Vasey founded the War Widows Guild. The Victorian War Widows Guild closed in 2021. Some items, including this letter, were donated to the Legacy archive for preservation - it shows a close bond between the two organisations. It was possible for a widow to be members of both Legacy and the War Widows Guild. Both organisations helped war widows in various ways.A record of a close link between Legacy and the War Widows Guild.Yellow carbon copy of a letter from Mrs Vasey to Vice President Radford in 1956.war widows guild, wwg, radford

Professor David Battersby, AM, PHD (Waikato), MHED (UNSW), Vice-Chancellor of University of Ballarat, now Federation University Australia, from July 2006 to 2016. Professor Battersby is a graduate with first class honours from the University of New South Wales and recipient of a Commonwealth Fellowship. He was awarded his PHD in the field of Sociology from the University of Waikato, New Zealand. Professor Battersby has been the recipient of numerous academic awards, including Commonwealth Relations Trust, and the Australian-Japan Foundation. He has been a Visiting Professor at universities in a number of countries and undertaken consultancies for UNESCO, OECD and a number of government agencies. Professor David Battersby was the Head of the Albury Wodonga Campus from 2000 to December 2003 and was also the Deputy Vice-Chancellor of Charles Sturt University until 2006, when he took up his appointment at the University of Ballarat. Charles Sturt University has named its annual prize for leadership and good citizenship within the student body, in honour of Professor Battersby. For services to Tertiary Education as a Senior Academic and Administrator, Professor Battersby received the Order of Australia Medal in July 2015. Professor Battersby has served as a member of the Board of IDP Education Ltd, he recently stepped down as the Chair of Education Australia Limited. He is a Founding Chair of Regional Universities Network and Founding Chair of the Museum of Australian Democracy at Eureka. (Education Australia Limited, http://www.educationaustralia.com/education_australia/board_of_directors/david-battersby.aspx). This item is part of the Federation University of Art Collection. The Art Collection features over 2000 works and was listed as a 'Ballarat Treasure' in 2007.Seated portrait of male dressed in blue / gold academic gown. It is Federation University Australia Vice-Chancellor David Battersby. Framers' stamp middle bottom back Marking reads: Conserve Framing Anna East Picture Framer 6 Darlot St Horsham 3400 Phone (03) 5382 5147 ABN 33 324 854 836portrait, vice chancellor, academic, seated, academic portrait, university of ballarat, federation university australia, david battersby, academic regalia

This item is part of the Caine Tool Collection owned by the National Trust of Australia (Victoria) and curated by the Hand Tool Preservation Association of Australia Inc (HTPAA). Watchmakers vice with multiple adjustments

Portraits of the Commonwealth of Australia Central Wool Committee from 1917-18. Those depicted are: A.H. Moore, F.B.S. Falkiner, B. Laycock, J.M. Balfour (Secretary), W. Stevenson Fraser (Vice Chairman), Sir J.M. Higgins (Chairman), W.J. Young (Vice Chairman), D. Gibb, R.B. McComas, E. Jowett.COMMONWEALTH OF AUSTRALIA / CENTRAL WOOL COMMITTEE / SEASON 1917-18 A.H. MOORE ESQ. / E. JOWETT ESQ. M.P. / F.B.S. FALKINER ESQ. M.P. / R.B. McCOMAS ESQ. / B. LAYCOCK ESQ. / SIR J.M. HIGGINS K.C.M.G. / CHAIRMAN / W.J. YOUNGER ESQ. C.B.E. / VICE CHAIRMAN / W. STEVENSON FRASER ESQ. VICE CHAIRMAN / D. GIBB ESQ. / J.M. BALFOUR ESQ. / SECRETARY Alice Millsc. of a. - central wool committee