Crosscut saws are used to cut down trees and to saw the trunks to length. This is a two man cross cut saw. The two-man crosscut saw has wooden handles that fit into a steel socket at each end. The teeth are designed to enable both users to have equal strength.Orbost has historically been based on the timber industry and it remains an important but diminishing economic activity. Timber cutting tools are reminders of this history.A steel bladed cross cut saw with wooden handles that fit into a steel socket at each end. The blade has one straight edge and a toothed curved edge. saw timber cross-cut-saw tool

Taken during World War I on the Western Front, this photograph depicts four soldiers dressed in full uniform and kit walking through muddy trenches on wooden duckboards.On the Western Front, the war was fought by soldiers in trenches. Trenches were long, narrow ditches dug into the ground where soldiers lived. They were very muddy, uncomfortable and the toilets overflowed. These conditions caused some soldiers to develop medical problems such as trench foot. There were many lines of German trenches on one side and many lines of Allied trenches on the other. In the middle was no man's land, which soldiers crossed to attack the other side. 'Duckboards' (or 'trench gratings') were first used at Ploegsteert Wood, Ypres in December 1914. They were used throughout the First World War being usually placed at the bottom of the trenches to cover the sump-pits, the drainage holes which were made at intervals along one side of the trench. This made it easier to pump out the pits when necessary. The raised edges of the boards in theory helped protect men's feet from accumulated water; walking along them (especially at night and in the wet) was something of an art as it was easy to lose one's footing and slip or trip on the fequently misaligned sections.Sepia rectangular reproduced photograph on matte photographic paperReverse: 6528/ (A copyright and reproduction notice from the Australian War Museum, printed in blue ink)/burke museum, military album, trench warfare, duckboards, soldiers, ww1, wwi, world war 1, world war i, western front

A coopers turning or bow saw is a woodworking tool used for straight or curved cuts. A bow saw is a type of frame saw with a thin toothed blade that is held in tension by a frame with two long narrow handles called "cheeks" that are supported and separated by a thin stretcher in the center of the handles, making a wide H shape (the cheeks form the uprights of the H, the stretcher the crossbar of the H). The blade is kept in tension with a turnbuckle that runs parallel to the blade between the two cheeks but on the opposite side of the stretcher.An age old tool used for cutting timber for hundreds of years before the modern cross cut saws were invented. This design of saw was part of a Coopers tool kit and used in the production of making barrels. However this item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Bow saw wooden handle with metal blade missingNonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, bow saw, turning saw, coopers tools, cutting wood, sawing timber, coopering

This sextant is very similar to a 1915 Sextant design. A sextant is an astronomical instrument used in measuring angular distances especially the altitudes of sun, moon and starts at sea determining latitude and longitude.This sextant is an example of a 19th-century marine instrument used for finding location at sea. It was made by London scientific instrument maker Troughton and Simms, which originated in 1826 and continued until 1922.Sextant and its fitted square wooden box. The handle of the sextant is carved with a cross-hatched pattern. Made by Troughton and Simms, London.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, sextant, navigational instrument, marine navigation, marine equipment, instrument, navigation, troughton and simms, london, scientific instrument

Janet was a long standing volunteer in the local community, especially for Red Cross.Dark wooden plaque in shape of map of Australia. Has 2 metal plaques.Australia Day Citizen Award. Shire of Phillip Island Janet Crilly 1993janet crilly, red cross, volunteers, trophies & awards

Flag waved by school children at opening of Phillip Island Bridge HistoricalRed cloth flag with Union jack in left corner and southern cross. On thin wooden stickPhillip Island bridge 1940flag, opening of phillip island bridge 1940

This photograph of the Orbost Municipal Band was taken for the 1937 Back To Orbost celebrations. The band is wearing new uniforms, bought especially for the occasion and for subsequent use. The double-breasted navy jackets have three pairs of silver buttons, three silver stripes on the cuffs and a silver lyre on each lapel. the bandmaster's stripes were gold. The jacket was worn with a white shirt and a bow tie. The caps were navy blue with a silver braided band and a central lyre. There were 29 members at this time. The first Orbost Brass Band was formed in 1889. Around 1908 the town band split and the Orbost Workers' Band was formed. Eventually the two bands merged in 1913 to reform as the Orbost Municipal Band under conductorship of Charles Spink. The band continued for many years but was later disbanded and again reformed. This was to happen a number of times, the last time being in 1961 and continuing through to the late 1970's. (Further info and Ref: In Times Gone By - Deborah Hall) The Orbost Municipal Orbost Band played a major role in the Orbost community activities. Charles Spink made sure each soldier returning home from the 1914 to 1918 war was welcomed home in front of the Shire Hall to the music of the Orbost Municipal Band. The band played in the main street on most Friday nights. The various Orbost bands over the years played a major role in community activities providing entertainment and musical experiences for the many members. A very creased and crumpled black / white photograph of a band in uniforms. The back row is standing, the middle sitting on a seat while a row of younger boys are sitting, cross-legged on the grass at the front. All have instruments. They are in front of a wooden building.on front - "Orbost Municipal Band 4.3.37"orbost-municipal-band music back-to-orbost-celebrations

Items part of the collection of J.E. Wiles, refer Cat No. 5410P for his service details.Small Brown book. Leather bound with wooden front and back cover. Series of crosses engraved into the front and Jerusalem engraved into the back. Inside 841 pages of pictures, prayers, tablets and psalms split into 3 sections. 473 pages of the order of Morning Prayers and a second supplement.Written inside front cover: "To Mother with love from Jack 16/6/40". Engraved on back "Jerusalem". Inscribed on side " Common Prayer, Hymns AOM". bible, middle east, ww2

Over several decades the Australian Army has been rotating a rifle company through the Australian Base at Butterworth, Penang, Malaysia. It's aim now is to train soldiers in jungle warfare and rotation occurs quarterly.Black Wooden Plaque with full listing of all members of Rifle Company Butterworth 108. Personnel in gold print and listed by Company Platoons and various support units with their respective unit badges on each side. Unit badge of cross bayonets and a Tigers head on a shield in the centre. in bottom right corner, 3 flags - Australia/ Malayasia/ Singapore. A hole is drilled into it.Headed "Rifle Company Butterworth 108 Malaysia Tour Nov 14 - Feb 2015.butterworth, rifle company, plaque

These four photographs were taken at Bones Day, an annual sports competition between the Army Survey Regiment and the RAAF School of Radio at Bendigo c1982. The two units took turns each year to host the event. The day competition usually comprised basketball, cross country, golf, sailing, squash, softball, tennis, touch football, rifle shooting, tug-of-war and volleyball. The two sports featuring in these photos are touch football and tug-of-war. The “big bone” trophy comprising a large bone from a beast housed inside a wooden framed glass case, was awarded to the winner of the day competition. The evening competition often included darts, carpet bowls, hookey, quoits and billiards/snooker. The “little bone” (a mounted chicken bone) was the consolation trophy awarded to the winner of the evening competition. The 3-hour bus trip for the visiting unit on their return was typically very raucous. The history of the Bones Day competition is best described in the booklet titled - Bones of Contention Souvenir Program. 1965. Refer to Item 6267.These four photographs were taken at Bones Day, an annual sports competition between the Army Survey Regiment and the RAAF School of Radio at Bendigo c1982. The photographs are on 35mm negative film. They are part of the Army Survey Regiment’s Collection. The photographic negatives were scanned at 96 dpi. There are additional photos in this set that have not been scanned due to poor quality or low historical value. .1) - Photo, black & white, 1982, Touch Football Team Back Row L to R: Brian Fauth, Bruce Bowers, Bob Mason, Paul Baker, Danny Galbraith, John Hook, Scott Payne. Front Row L to R: Roy Hicks, Peter Imeson, Alan Glanville, John Gilbert, Wally Chilcott. .2) - Photo, black & white, 1982, Tug-of-War Team Back Row L to R: Cliff Webb, Peter Treble, John Lane, Andy Wilson, Rick Warren, Rusty Williams, Brian Paul. Front Row L to R: Brian Fauth, Rick Downie, unidentified, Ken Slater, Rhys De Laine, John Smith, unidentified. .3) - Photo, black & white, 1982, Tug-of-War Team L to R: Peter Treble, Brian Paul, Rusty Williams, Rhys De Laine, unidentified (2), John Smith. Army personnel in background standing L to R: Rick van der Bom, Paul Hopes, Ian Nelson, Mick Dempster, John ‘Flash’ Anderson, Geoff Havelberg, John ‘Stormy’ Tempest, Bruce Gordon, Dan Cirsky, Neil Jones, Gerry Gates, Peter Main, Bob Thrower, Barry Miller, Gill Park. Army personnel in background seated L to R: Roger Pearson, Mick Gillham, Penny Knott, Leanne Shirley. .4) - Photo, black & white, 1982, Tug-of-War Team L to R: Rick Warren, Cliff Webb, Andy Wilson, Peter Treble, Brian Paul, Rusty Williams, Rhys De Laine, unidentified. Army personnel in background standing L to R: Rick van der Bom, Ian Nelson, Mick Dempster. .1P to .4P – No personnel are identified.royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, raaf school of radio, bones day

These eight photographs were taken at Bones Day, an annual sports competition between the Army Survey Regiment and the RAAF School of Radio at Bendigo in November 1978. The two units took turns each year to host the event. The day competition usually comprised basketball, cross country, golf, sailing, squash, softball, tennis, touch football, rifle shooting, tug-of-war and volleyball. The “big bone” trophy comprising a large bone from a beast housed inside a wooden framed glass case, was awarded to the winner of the day competition. The evening competition often included darts, carpet bowls, hookey, quoits and billiards/snooker. The “little bone” (a mounted chicken bone) was the consolation trophy awarded to the winner of the evening competition. The 3-hour bus trip for the visiting unit on their return was typically very raucous. The history of the Bones Day competition is best described in the booklet titled - Bones of Contention Souvenir Program. 1965. Refer to Item 6267.These eight photographs were taken at Bones Day, an annual sports competition between the Army Survey Regiment and the RAAF School of Radio at Bendigo in November 1978. The photographs were printed on photographic paper and are part of the Army Survey Regiment’s Collection. The photographs were scanned at 300 dpi. .1) - Photo, black & white, 1978, Softball Team Back Row L to R: Janet (Chopping) Justin, John Ashby, Scheryal Delforce, Tracey (Beckwith) Phillips. Front Row L to R: Zoe (Lisiewich) Ames, Di Chalmers, unidentified, Le-Anne (Smallshaw) Shirley, Lorraine (Daly) Talbot-Smith, Lynn Johnson. .2) - Photo, black & white, 1978, Tennis Team Back Row L to R: Mick Flynn, Chris Carter, Ken Delmenico. Front Row L to R: unidentified (x3), Adrian Rynberk. .3) - Photo, black & white, 1978, Golf Team Back Row L to R: George Austen, unidentified, Roger Rees. Front Row L to R: Peter Imeson, Greg Gilbert, unidentified officer, Paul Richards. .4) - Photo, black & white, 1978, Basketball action: Gill Park – No. 8 .5) - Photo, black & white, 1978, evening events: L to R: Garry Hudson, unidentified RAAF airwoman. .6) - Photo, black & white, 1978, evening events: L to R: Gary Warnest, Wayne Rothwell. .7) - Photo, black & white, 1978, evening events: L to R: Mick ‘Buddha’ Ellis, unidentified RAAF airwoman. .8) - Photo, black & white, 1978, evening events: L to R: Mick ‘Buddha’ Ellis, unidentified, Ian Belmont, Ken Slater. .1P to .8P – No personnel are annotated.royal australian survey corps, army svy regt, rasvy, army survey regiment, fortuna, asr, raaf school of radio, bones day

These five photographs were taken at Bones Day, an annual sports competition between the Army Survey Regiment and the RAAF School of Radio in November 1984, 1985, and 1988. The two units took turns each year to host the event. The day competition usually comprised basketball, cross country, golf, sailing, squash, softball, tennis, touch football, rifle shooting, tug-of-war and volleyball. The “big bone” trophy comprising a large bone from a beast housed inside a wooden framed glass case, was awarded to the winner of the day competition. The evening competition often included darts, carpet bowls, hookey, quoits and billiards/snooker. The “little bone” (a mounted chicken bone) was the consolation trophy awarded to the winner of the evening competition. The “O.H.A.R.A Rock” seen in photo 6276.2P was awarded to PTE Zahra for the lowest score in rifle shooting. He had to lug it with him for the rest of the evening. The 3-hour bus trip for the visiting unit on their return was typically very raucous. The history of the Bones Day competition is best described in the booklet titled - Bones of Contention Souvenir Program. 1965. Refer to Item 6267.This collection of five photographs was taken at Bones Day, an annual sports competition between the Army Survey Regiment and the RAAF School of Radio, at Bendigo and Laverton respectively in November 1984, 1985, and 1988. The photographs were printed on photographic paper and are part of the Army Survey Regiment’s Collection. The photographs were scanned at 300 dpi. .1) - Photo, black & white, 14th November 1984, Trophy presentations L to R: unidentified RAAF officer, CO LTCOL Jorge Gruszka. .2) - Photo, black & white, 13th November 1985, Trophy presentations L to R: MAJ Daryl Hockings CSM, PTE JB Zahra, unidentified RAAF officer. .3) - Photo, black & white, 13th November 1985, tug-of-war L to R: Peter Lefel, Kerron South, Barry Hogan, DB Zahra, unidentified (x2), Guenther Ebenwaldner, Steve Burke, Mal Paterson. .4) - Photo, colour, 1988, at Bendigo, tug-of-war L to R: Jodi Bowman, unidentified, Frank Savy, Barry Hogan, unidentified (x2), Graeme Spong, unidentified (x2), Mick Duggan, unidentified, Dave Lambton-Young, unidentified (x2). .5) - Photo, colour, 1988, at Bendigo, tug-of-war L to R: Mick Duggan, Dave Lambton-Young, unidentified (x3), Frank Savy (with sign), unidentified, Barry Hogan, unidentified, Graeme Spong, unidentified (x3)..1P to .7P – No personnel are identified. The date is stamped on the back of photos .1P to .3P.royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, raaf school of radio, bones day

Stereoscopes work on the principle of viewing left and right eye images of the same image and in the process having the image appear as 3 dimensional. The have been popular since the middle of the 19th century.The Holmes version of this object was manufactured cheaply and became widely available, hence it is an object with which many people would be familiar.Wooden oval shaped with glass viewing inserts. Extension in cross shape with wire brackets either side.warrnambool, stereoscope, holmes stereoscope

This clock has no known provenance but has been in the Warrnambool and District Historical Society collection for many years. This clock is a good example of a 19th century (or perhaps early 20th century?) wall clock and is an attractive display item. This is a wooden- frame clock for hanging on a wall. The face is tin painted cream with some paint missing. The numbers on the face are Roman numerals and the hands have Maltese crosses at the ends and are painted. The face is inlaid with 6 small circular dots of mother-of-pearl and there are seven similar inlaid circles on the wooden base. The glass covering the dial is hinged and brass-edged. The wooden base has fretwork and scroll sections and carved decorative edges and a rounded bottom. One side piece of the decoration is missing. The fretwork piece opens to show a brass pendulum. At the back of the clock are two pegs and a metal clip for hanging the clock. ‘Phillip Hunter & Co. London’ history of warrnambool, wall clock

A darning mushroom such as this was a common household item in Australia up to the 1950s. Socks were mostly made of wool and when holes appeared, (particularly in the heel) they had to be darned, usually in a criss-cross pattern. The darning mushroom gave the darner a good smooth and stable surface. Many of these darning tools were homemade. The darner could also have been used to mend torn sleeves or other items of clothing. Some people may still use a darning mushroom today but in general socks are not darned but disposed of when holes appear. This darning mushroom has no known local provenance but it is a good example of a household item of times past. This is a light-coloured wooden darning tool. The mushroom-shaped top is attached to a handle which is elongated at the bottom end and has a slight ridge near the base and a small hole at the end. There are some pit marks on the top surface. darning mushroom, social history, history of warrnambool

The bridge is not definitively identified, but is of similar construction style to other bridges built in rural areas around this time. Circa 1930”s and may be Ryders Bridge (Old Tawonga Bridge) which crosses the Kiewa River on Mountain Creek Rd Tawonga The first Tawonga bridge was built in 1884- destroyed by floods in 1916. New bridge constructed 1923 and destroyed in 1953. Present concrete bridge constructed in 1986 and named Ryders Bridge These wooden bridges were the only method for transporting stock and produce to market, transporting timber to the mills, sending and receiving mail and for local people to cross the many rivers in the area to go about their daily business. 1- Black and white photograph is glued onto heavy cardboard, which is yellowing with age. Top right hand corner has a tear in the cardboard. Photograph depicts a wooden bridge on wooden piles with 2 white wooden railings along the length of both sides. 2- Original photo has been digitally enlarged to show a gentleman in a light coloured suite and wearing riding boots leaning on the rails of the bridge. The bridge is not definitively identified, but is of similar construction style to other bridges built in rural areas around this time. Circa 1930”s may be Ryders Bridge (Old Tawonga Bridge) which crosses the Kiewa River on Mountain Creek Rd Tawonga bridge; tawonga bridge; kiewa valley

This medical / hospital instrument was used in the Tawonga District General Hospital which was built in the 1950s specifically for the increase in population due to the Kiewa Hydro Scheme.Historical: Shows the development of scientific hospital equipment. Provenance: Used in the Tawonga District General Hospital which was remote and therefore required good equipment.Used to look into the rectum. Part 1 fits into a hollow cylinder of part 2. 1. Plastic brown handle - round and shaped at end with 4 slices to form square shape for easy grip. attached to steel with protective plate long thin rod & then cylinder with covered shaped ends. 2. All steel - spoon shaped handle on angle to hollow cylinder wider and shaped into hollow cylinder - bottom cut cross section on angle.11AQ - on part 1. on steel between protective plate and wooden handle 11AQ - on part 2. across tip of handle DOWNS DA-001-01-Y length ways on handlemedical instrument. hospital equipment. mt beauty. tawonga. rectum.

Tobacco farming began circa 1960 in the Kiewa Valley and consequently became one of it major industries. Many of the italian families were involved in tobacco farming.Historical: This equipment was used on one of the first tobacco farms in the Kiewa Valley at Mongans Bridge. Provenance: This tobacco farmer came from Italy and was sponsored to visit a tobacco farmer in Myrtleford to learn how to grow tobacco so that he could transfer those skills to his own farm in the Kiewa Valley.Wooden, panelled red (painted on outside) rectangular box on side are iron bars with steel reinforcements around the box, near the top and bottom on 4 sides and across the middle on the 2 ends and front (not back). Diagonal steel between bottom and middle iron on the front. Ends: 2 iron bars from the ground curved up to top holding an iron rectangular beam that goes from end to end. Midway of beam is a vertical long screw at the top of which is a cross formation of 4 iron rods forming a handle for turning. Inside, the screw is attached to an iron frame which is attached to a wooden panelled platform enabling it to be raised or lowered as required.tobacco. mongans bridge. kiewa valley. hand press. parmesan. rossaro. lorenzi brothers.

Tobacco farming began circa 1960 in the Kiewa Valley and consequently became one of its major industries. Many of the Italian families were involved in tobacco farming.Historical: This equipment was used on one of the tobacco farms in the Kiewa Valley. The Tying Horse was home-made showing the resourcefulness of farmers living in the Kiewa Valley. Provenance: The tobacco farmer came from Italy and was sponsored to visit a tobacco farmer in Myrtleford to learn how to grow tobacco so that he could transfer those skills to his own farm in the Kiewa Valley.Burley tobacco stick is different to Hicks type stick. Tying of green leaf on the sticks - with the twine attached. There is small sharp metal blade on the end of the horse used for cutting twine. Rectangular wooden frame. The beam along the bottom is kept in place by 2 diagonal planks on each side and at both ends. The beam keeps the frame upright with 2 cross beams at each end. At each end there is a vertical beam with a 'V' cut out of each to hold a wooden beam/stick/tree branch. Wood is rough.tobacco. kiewa valley.tying horse. guido angelini.

This pack is made from materials available at the time and was used to carry supplies and equipment for bushwalking and/or cross country skiing. It is designed to protect the contents in all weather and to be as comfortable and practical as possible. The Bogong High Plains was a popular destination for bushwalking and cross country skiing. This backpack is an early example of the equipment used for extended walks and/or cross country skiing. Heavy green canvas back pack with flap at top to cover contents and to attach at base. Sides fold over at the top. The back is attached with zig zag cord with 5 holes down each side. The front piece has 2 pockets with straps to secure them. The sides have a wooden rectangular piece wrapped by canvas to maintain the shape of the pack. There are webbed shoulder straps on an angle attached to the back with adjustable straps. There is a thin metal rod on the outside of each side presumably to enable items to be hung from them. On the inside of the flap: Leon Henry/Trendweth(?)/ West Brunswick/Melbourne/ Victoria/ Australia Previous name and address has been crossed out.backpack; bogong high plains; bushwalking; cross country skiing

This is a box for packaging Kraft Cheese in Victoria. A Melbourne man, Fred Walker, negotiated with the American company the Kraft processing of cheese and established the Kraft Walker Cheese Company in 1934 and leased the Warrnambool Cheese and Butter Factory premises in Allansford in 1935. Until 1993 this factory produced Cheddar Cheese, Swiss Cheese, Cracker Barrel and Tasty Cheddar Cheese and other varieties and won many Australian awards. A microbiological laboratory was established and from 1939 Ls O’Callaghan, a noted Warrnambool historian, worked in this laboratory, establishing the basis of the dairy industry guidelines for effective and scientific processing of milk. He worked there for 45 years. The Warrnambool Cheese and Butter Factory is still today a major industry in the Warrnambool area. This box is of key importance as an item that held Kraft Walker Cheese Company cheese. This company and its factory in Allansford was a key business in the dairying industry in the Warrnambool area for nearly 60 years. The box may have been used locally in the Allansford factory. This is a wooden oblong box with no lid. It has been nailed together with 12 nail heads visible and three nails protruding from the top edges. It has been used to package five pounds of Kraft Cheese. There is handwritten material in pencil on three sides (some crossed out) and the Kraft Cheese information with the ‘K’ logo is stamped on the bottom. ‘The World Renowned Kraft Cheese (K), Patented July 26 1916, 5 lbs net, Kraft Walker Cheese Co. Pty. Ltd., Melbourne, Australia’kraft walker cheese company (allansford), fred walker, warrnambool cheese and butter factory, warrnambool, history

This medical aid was popular in the late 19th and early 20th centuries. It was used as a massaging and vibratory tool and was recommended for the relief of all sorts of complaints, including colds, digestive complaints, rheumatism, headaches, female hysteria, tumours, lung diseases and even ‘double’ chins.This massager is of considerable interest as a medical aid that was popularly used to treat many kinds of ailments in the late 19th and early 20th centuries. It is indicative of the popularity at that time of vibratory or massaging objects that were used to aid in the relief of many ailments for which there were few other remedies at the time.This is a medical instrument with a metal shaft in three sections and a circular piece of metal at the end. The metal piece has a turning handle at one end and a cross metal piece at the other end. This cross piece has a metal cup with a covering piece of stiff rubber at one end and a circular piece of rubber at the other end. At one end of the metal shaft is a wooden handle. Some of the metal is rusted and the rubber ball has been split.‘Vee Dee Patent No….’ ‘1…2…3…’ ‘J. E. Garratt, London 124 Southwark Street S.E.’ antiquarian medical aids, history of warrnambool

This small cross cut saw, with a home-made handle, would have been used to fell small trees or cut timber and was designed to be used by one person. Cross cut saws derive from ancient times but came into general use in the 15th century. Those used to fell large trees or cut large pieces of timber were operated by two people. Cross cut saws today have been mostly replaced by electric chain saws. This is a small cross cut saw. It has a metal blade with large serrations or teeth and a metal piece affixed to the blade with screws. A wooden handle has been fitted into the end metal piece in an upright position. The metal is pitted and rusted and the handle is rectangular-shaped tapering down at the end where it is affixed to the metal. vintage tools, warrnambool

This saw is used for cutting curved edges of timber. It could have been used in the home or for commercial building purposes. The hand-held saw has largely now been replaced by electrically-operated machines. This item has no known local provenance but it is an interesting example of a hand-held tool of the past.This is a hand saw with a thin serrated metal blade. The blade is affixed to the bottom end of a wooden frame with two upright pieces and a cross piece affixed to the upper part of the frame. The top part of the frame has a piece of plaited rope stretched across. The top part of the frame has two wooden handles. The blade is somewhat rusted and the wooden parts and the rope are stained. vintage tools, history of warrnambool

This miner’s pick was of the type used to extract limestone at the Warrnambool limestone quarries, mainly for buildings and walls. This pick cut the sides and the top of the block and then it was levered off with a crowbar at an angle of about 30° to 40°. These blocks were then reduced to the required size using cross cut saws. There were about 12 limestone quarries operating in Warrnambool in the 19th century and limestone was extensively quarried for about 85 years to the 1930s when quarrying ceased. Today there has been a small revival in the Warrnambool area in the use of limestone blocks for building. Warrnambool also once had several bluestone quarries on the outskirts of the town. This miner’s pick has a wooden handle with rounded sides tapering to a wider end. The wood is weather-worn and split in places, especially at the top end. The pick is metal with a curved shape that tapers to a point at one end. The metal near the other end has a cavity into which is inserted the wider end of the wooden handle. limestone quarries in warrnambool, quarrying in warrnambool, warrnambool history

This shield was awarded in 1909 by the Rifle Clubs of South Western Victoria for a rifle-shooting competition. Rifle Clubs operated in Warrnambool from 1860 and possibly earlier and in 1904 a union of rifle clubs in the Warrnambool district was formed - the South Western District Rifle Clubs' Union. Edward Geary was a member of the Mounted Rifles, G Company in the 1890s and served as a sergeant in the Boer War, 1899-1900. He was commended by the founder and commandant of the Victorian Mounted Rifles, Colonel Tom Price, for his bravery in South Africa rescuing wounded soldiers under heavy fire. After the Boer War Geary continued to serve in the Mounted Rifles local unit (later called Australian Lighthorse). He was also a long-time member of the Warrnambool Rifle Club and won this trophy as a member of a Lighthorse unit. This shield is of interest as an example of the early 20th century trophies awarded by the Warrnambool district Rifle Clubs. Gun Clubs and Rifle Clubs have been existing in the Warrnambool district since the 1860s. This is a small wooden shield, lightly polished on the front surface. It has silver-coloured metal plates attached by metal pins to the front of the shield in the form of a scroll, two fern or laurel leaves, printed information and a crown with two crossed rifles. At the back is a metal clip to enable the shield to stand up. 'The Warrnambool Citizens Challenge Shield for Competition by Teams, 1909, of Rifle Clubs in the S.W. District of Victoria won by No.1 Sq. XI, A.L.H. Handicap 65, Total Score 579, Arm. Sgt. E. Geary 88'warrnambool rifle club, edward geary, south western district rifle clubs union, warrnambool history

This historic site of Australia’s first open-air gallery is being redeveloped in 2023 for multi-housing fronting the Research Creek. In 1955, Ian and Joan Hassall moved to Eltham. They took a property on the corner of Zig Zag Road and Main Road, Eltham, north of the township (later known as 1215 Main Road). In July 1962, they opened their open-air gallery. Hassall’s Roadside Galley, “…cradled in the fold of hills to the north of Eltham” inspired by Ian’s own experience of exhibitions along the Embankment in London. The property included remnants of a stone quarry, paintings were hung on screens and removed at night. Various pedestals, that looked like giant mushrooms displayed sculpture, pottery, and jewellery. It had a small natural amphitheatre at the foot of a little sandstone cliff that fall away to the bed of a stream. To enter the gallery, a visitor crossed a small freestone bridge of oriental design, built by Hassall from local stone. The bridge spanned the stream flowing beneath great willow trees. Near the entrance wooden figures were displayed formed from pieces of local wood, said to speak to Ian Hassall’s sense of fun. Hassall’s Gallery was the first gallery of its kind in Australia. Ian became a full-time artist and when it first opened, he exhibited paintings he had made while touring the outback with writer and fellow Eltham resident Alan Marshall. He also exhibited other Australian artists over time including locals Lindsay Edward and Peter Glass.daryl morrow collection, eltham heights luxury living, hassalls roadside gallery, housing development, real estate development, research creek, 2023-07-10

This historic site of Australia’s first open-air gallery is being redeveloped in 2023 for multi-housing fronting the Research Creek. In 1955, Ian and Joan Hassall moved to Eltham. They took a property on the corner of Zig Zag Road and Main Road, Eltham, north of the township (later known as 1215 Main Road). In July 1962, they opened their open-air gallery. Hassall’s Roadside Galley, “…cradled in the fold of hills to the north of Eltham” inspired by Ian’s own experience of exhibitions along the Embankment in London. The property included remnants of a stone quarry, paintings were hung on screens and removed at night. Various pedestals, that looked like giant mushrooms displayed sculpture, pottery, and jewellery. It had a small natural amphitheatre at the foot of a little sandstone cliff that fall away to the bed of a stream. To enter the gallery, a visitor crossed a small freestone bridge of oriental design, built by Hassall from local stone. The bridge spanned the stream flowing beneath great willow trees. Near the entrance wooden figures were displayed formed from pieces of local wood, said to speak to Ian Hassall’s sense of fun. Hassall’s Gallery was the first gallery of its kind in Australia. Ian became a full-time artist and when it first opened, he exhibited paintings he had made while touring the outback with writer and fellow Eltham resident Alan Marshall. He also exhibited other Australian artists over time including locals Lindsay Edward and Peter Glass.daryl morrow collection, eltham heights luxury living, hassalls roadside gallery, housing development, real estate development, research creek, 2023-07-13

Eltham Shire Council Health Department Inspectors - possibly used for stamping meat Cross Ref: EDHS_01870-13 - Dianne Yans, Health Inspector, undertaking inspections at Safeway Supermarket, 1989Self inking rotating brass roller with "ESC" raised surfaces in four locations at 90 degrees. Roller mounted between two brass arms contacts a felt pad (dampened with ink - red residue evident) covered by pivoting brass cover; with fromed wooden handle Stamped on side of brass support arms M. Lober P/L Melbourne Pat Pend 3198 \ 6eltham shire council, health inspector, shire of eltham, meat stamp