The World War One Memorial Stained glass windows in the Barkly Street Uniting Church resulted from a request made in 1919 by the Barkly Street Young Men's Club to be given permission to raise money to pay for the project. The window was designed by Fisher Co. Pty Ltd, and was unveiled by a former army chaplain - either Rev. J.A. Gaunt or Rev. Bladen on the 14th March 1920. The total cost of the windows was 171 pounds 10 shillings. The window cost 150pounds, the window was fixed into position for 15 pounds, and three wire screens cost 6 pounds 10 shillings.Digital Photographs of the World War One memorial stained glass windows in the Barkly Street Uniting Church, Ballarat East.Repousse World War One tablet: 1914-1919 For God, King and Country The windows above have been erected as a memorial to the heroic lads of this school and church who fell in the Great War. Brittain, H.O. Butcher, J.C. Cornish, H. R. MM (Richard) Eady, James Arthur Edmends, William H. Ferguson, F. Farrar, A.Z. Gist, C.H. Gates, Stanley C. Grave, Howard B. Hughes, Arthur W. Hughes, George A.C. Jones, William Stanley (Stan) Marshall, Robert R. McConnell, A.R. (Ralph) Muller, A.V. Polkinghorne, E.C. (Clifford) Ridgwell, Herbert R. Sansum, Arthur H. Smith, Alfred G. Tait, Robert E. Tait, Lawrence (Laurie) Veal, Thomas P. Vincent, Leslie A.barkly street uniting church, barkly steet methodist church, barkly street weseyan church, j.a. gaunt, bladen, stained glass, soldier, world war, world war one, mmm

"The fine structure of St. Peter's, with its prettily-decorated interior, which holds crowded congregations at Holy Mass on Sundays, is alone an eloquent testimony of the piety and devotion which permeates the whole parish. Attached to the church is a circulating library, and Catholic papers and other literature are distributed at the church door. Branches of the H.A.C.B. Society and Catholic Federation are doing much good work. (Melbourne Advocate, 17 January 1914) "OPENING AND CONSECRATION OF THE NEW CATHOLIC CHURCH OF ST. PETER’S, DAYLESFORD Cross on St. Peter'sNotwithstanding the inclemency of the weather, the opening of the new Catholic Church of St. Peter’s, yesterday (Sunday), attracted a crowded congregation. Although the rain, which has poured almost incessantly for some days past, had left our roads and streets in the condition for which Daylesford is celebrated in winter weather, and although he storm and rain seemed to increase as the hour announced for the ceremonies approached, the church was filled by a large congregation, comprising all sects and denominations of Christians in and around the district. The beautiful edifice, erected mainly through the zeal, liberality and energy of the respected pastor, presented a most imposing appearance, and reflects infinite credit upon the Rev. Mr. Slattery, and the flock committed to his charge. The church was commenced in November 1863 and has been in the hands of the workmen up to the present time, work being uninterruptedly carried on. On commencing the foundations, it was necessary to excavate until solid clay was reached, which in consequence of the deep rich chocolate soil on the site of the building, had to be carried down to an average depth of 6 feet 6 inches. The foundations were laid with massive stones in courses of 12-inch, and four feet thick, reducing to 3 feet below the floor line. The style of the building is decorated Gothic, and consists of a nave, 80 feet by 30 feet in the clear, and a chancel 18 feet high; from floor line to apex of roof, 47 feet, which is elegantly constructed, consisting of six spans or frames with puncheons resting on carved corbels, low down between the windows. The north side consists of a handsome entrance, near the north-west angle, approached by nine steps of cut stone, and four bays of windows on nave, and a small door on side of chancel, intended as an entry from the sacristy. The south side presents a very handsome view to Victoria street, a beautiful porch entrance giving access to the building on the south-east end of nave; and on the south-west angle a handsome octagonal spire, terminating in an iron cross, with gilt floriations; the height of top of cross, from floor line, is 88 feet. A stone stairs gives access to the organ gallery and the belfry. The whole of the windows are of a handsome geometrical design, and carved in stone, with mullions and tracery, and glazed with amber-tinted glass, the chancel window being 15 feet high, and 8 feet wide. The chancel arch is unusually large, 27 feet St. Peter's interiorhigh and 18 feet wide, and handsomely moulded, and presents a fine appearance from the body of the church. The roof is stained a rich oak, with heavy cornice, and all the walls are smoothly plastered, and colored peach color, giving the amber-tinted glass a beautiful soft cathedral appearance to the interior. The altar is of a very chaste design, the panels being moulded with Gothic heads, and finished in white and gold; the altar rail was not completed, but is intended to be of polished cedar, with carved pillars. The interior fittings will be proceeded with immediately, and to complete the design, an organ gallery, with sittings for about 100 persons besides the choir, will be constructed on the west end. It is intended also to place pillar gaslights on each side of the main entrance, for lighting during vespers in winter. The style of architecture has been strictly carried out, and in the best and most substantial manner. The building has been erected under the superintendence of the architect Mr. John Townsend Brophy, a member of the congregation, and who has discharged his duty with great ability and care. The hour of half-past eleven has scarcely passed when from the sacristy entered His Lordship the Right Rev. Dr. Gould, Bishop of Melbourne, preceded by the Very Rev. Dean Hayes (Sandhurst), the Rev. P. J. Slattery, and a number of boys dressed in white surplices. The Right Reverend Prelate proceeded to the foot of the altar, the Very Rev. the Dean on his right, and the Rev. P. J. Slattery on the left. The prayers usual upon the occasion were read by the Bishop. A procession was then formed, and went around the church in the following order. Several youths bearing wax candles first, next the Very Rev. the Dean, then the Bishop and his train bearers, and following were the Rev. Mr. Slattery and acolytes. Having returned to the altar in the same order, the Deacon (Dean Hayes) and Sub-Deacon (Rev. P. J. Slattery) proceeded to robe his Lordship, who had taken his seat at the epistle side of the altar, for the solemn High Mass, at appropriate times wearing his mitre and bearing his crozier. The mass, which was chanted by the Bishop with touching simplicity and earnestness, was then commenced. The choir, under the direction of Mr. Meunsch, organist, was full and most effective. Mrs. Testar, of Melbourne, having generously offered her valuable services, took the leading soprano solos, and it is scarcely necessary to add, rendered them with exquisite taste and feeling – her beautiful voice being heard with great effect throughout the entire building. The choir consisted of the following ladies and gentlemen who volunteered to aid in the ceremonies upon this most interesting occasion. Ladies: Mrs. Tresar, soprano; Mrs. J.J. McCormick, alto; Miss Julia Conry, soprano; Mrs. Vincent, soprano; Mrs. Aitken, soprano. Gentlemen: H. Guthiel, tenor; Master John Murphy, tenor; James Knox, bass; J. M. Murphy, bass; Mr. Staunton, baritone; Mr. Sourby, alto; Mr. Short, bass. The chant, “Let us adore,” during the procession, was given by Mrs. Vincent with considerable power. The selection of the “Imperial Mass” (Haydn’s No. 3) was felicitous, and the highly artistic and finished manner in which the different parts were sustained, demonstrated that great and persevering care must have been bestowed on the preparation for “the opening day.” The “Kyrie” was given with the full strength and power of the choir. The swelling of the voices in complete harmony, and the pealing of the organ in the midst of incense and prayer, produced a most marked effect upon the congregation. In the “Gloria,” the solos of Mrs. Testar were really beautiful and Mrs. McCormick rendered the alto solos with considerable merit. Mr. Knox sang the part commencing with the words “Qui tolles” with much taste and power. The “Credo” than which we believe there is not a more magnificent piece of sacred music extant, was most successful in its rendering, nor do we ever remember to have heard anything more touching than the manner in which the line “Vetam Venturi in Seculi,” was given by Mrs. Testar. The offertory hymn “Come unto Me all ye that labor,” was given by Mrs. Testar with the most thrilling effect. The “Sanctus” having been sung, in which Mr. Sourby ably rendered an alto solo, the “Agnus Dei” was commenced with a solo by Mrs. McCormick and was given with great taste and feeling, Mrs. Testar, at the conclusion of the “Agnus,” taking up the soprano part. Mass being concluded, the Very Reverend Dean Hayes ascended the altar and proceeded to preach the opening sermon, taking as his text Second Paralipomenon [Chronicles II], 7th chapter and 16th verse – “For I have chosen and have sanctified this place that My hand may be there for ever, and My eyes and My heart may remain there perpetually.” St Peter's manseAt the close of the sermon a collection was made by the very reverend preacher, assisted by John Egan, Esq., Corinella, on behalf of the church, and about fifty pounds were contributed. When it is remembered that 500 tickets had been issues at 10s each, and the inclemency of the weather taken into consideration, the collection may be regarded as a large one. Benediction was sung by the Rev. P. J. Slattery, assisted by Dean Hayes, the choir singing the “O! Salutaris Hostia” and “Laudate.” Handel’s Hallelujah Chorus was sung at the termination of the ceremonies. The vestments issued at Benediction, as well as at the Mass, were of the most gorgeous and beautiful character. When the Benediction was over, the Rev. P. J. Slattery, standing at the front of the altar said– “I wish to say one or two words before the congregation leave. I feel most deeply indebted to all of you who have attended here today for the honor and glory of God, not withstanding the difficulties you had to encounter from this most inclement season. I am truly delighted at such a manifestation of feeling, and will not easily forget it.” The rev. gentleman having disrobed, thanked the members of the choir for their kindness in assisting at the ceremonies, and more especially Mrs. Testar, who had braved all the storm and rain to be present at, and give the advantage of her great musical abilities on, the “opening day.” (Daylesford Mercury, 15 May 1865.)A number of photographs of St Peter's Catholic Church, Daylesford, taken at the 150th anniversary celebration. st peter's catholic church daylesford, decoration, altar decoration, anniversary, daylesford, religion, painting, interior, slattery, gough, d'alton, mcmahon

interpretation centre in the crater of Tower Hill near Koroit. The centre was designed by Robin Boyd.tower hill, tower hill interpretation centre, robin boyd

Designed by Dr Paluel Flagg around 1915 and later used for 25 years. This laryngoscope blade was designed to meet certain expectations about laryngeal richness and to avoid major tracheal injuries in patients. (Ball, 2014) Article reference: C. M. Ball & R. N. Westhorpe. 2014. Anaesthesia & Intensive Care. Nov 2014, Vol. 42 Issue 6, p687-688. 2p.Complete laryngoscope used by Dr Lennard Travers. Medium sized Flagg straight blade with a slight curve at the distal end and a 'U' shape canal. The handle has a serrated grip for easy use and it is also a container for two batteries, it has a switch on its base. The full piece has visible and deep scratches over the top of blade around the stamped blade type inscription. The base of the blade has a worn surface with a slight discolouration due its use. No presence of led light bulb on blade. Minor scratches on handle base battery deposit with an ON - OFF switch black button. Stamped on blade, FLAGG LARYNGOSCOPE Stamped on top handle blade base, AUBURN, [W/A seal], N.Y.U.S.A. Stamped on the handle base power source button, ON [red colour], OFF [blue colour]flagg, laryngoscope, flagg blade, button, battery handle, straight blade

Designed by Dr Paluel Flagg around 1915 and later used for 25 years. This laryngoscope was designed to meet certain expectations about laryngeal access and to avoid major tracheal injuries in patients (Ball, 2014). Article reference: C. M. Ball & R. N. Westhorpe. 2014. Anaesthesia & Intensive Care. Nov 2014, Vol. 42 Issue 6, p687-688. 2p.Flagg laryngoscope handle only. The handle has a serrated grip for easy use; it is also a container for two batteries and has a switch on its base with an ON - OFF switch black button which quite rusty. The handle has a screw on top of it, used to secure the blade. The full piece has minor scratches over its surface. It has a small crack in the switch area and a missing screw bellows it. The handle has an inscription about the manufacturer company seal and name stamped at the top of the handle ring.Stamped on top handle blade base, AUBURN, [W/A seal], N.Y.U.S.A. Stamped on the handle base power source button, ON [red colour], OFF [blue colour]flagg, handle, switch, laryngoscope

The Lidwill machine was designed by Mark Lidwill in 1913, for the purpose of mechanical or insufflation anaesthesia. It was manufactured by Elliott Bros. of Sydney.Colour photograph of a Lidwill anaesthetic machine sitting on carpet. A circular metal ether vaporiser sits on a brown wooden base, with brown tubes connecting to a trap bottle and metal valves, and a brown tube connected to the valve is coiled on the floor.anaesthetic equipment, lidwill anaesthetic machine, mark lidwill, ether vaporiser, elliott bros sydney

The Bruck Inhaler is a modification of the Clover Inhaler, designed by Lambert Bruck.Colour photograph of a Bruck inhaler lying on its side on a wooden table. The metal inhaler is oval shaped with one half made of glass, and also has a vertical crosspiece. Lying next to the inhaler is a face mask and a filler for measuring ether.anaesthetic equipment, bruck inhaler, ludwig bruck, inhaler, clover inhaler

The Lidwill machine was designed by Mark Lidwill in 1913, for the purpose of mechanical or insufflation anaesthesia. It was manufactured by Elliott Bros. of Sydney. Shortly afterwards, the Anaesthetic and Portable Machine Company of Sydney devised a machine that was functionally the same but also contained an electric lamp heater.Colour photograph of a modified Lidwill anaesthetic machine sitting on carpet, taken from above. The vaporiser is metal and circular, and has metal valves and controls and two orange tubes. The machine has an electric cord and power plug which is coiled on the floor.anaesthetic equipment, lidwill anaesthetic machine, mark lidwill, ether vaporiser, anaesthetic and portable machine company of sydney, vaporiser

This flag was designed and handmade by the South Vietnam Resistance Army. It was donated to the RAAF Vietnam Veterans Association by former soldier, Le Van Luc, who was a soldier in the South Vietnamese Army until 1975, and then a member of the resistance movement.Hand made Republic of South Vietnam National Flag. The main colour of the flag is yellow. It has three red stripes in the centre stitched in red.

Christ Church was constructed in 1854-57 and designed in Decorated Gothic style by Albert Purchase & Charles Swyer. It was enlarged in 1874 and 1881 to the designs of Sydney W Smith. It is one of four main buildings constructed on land granted to the Church of England in 1855 and named Church Square. The other buildings are the bishop's residence, vicarage and parish hall. Heritage Victoria describes it as a 'rare and significant square in the history of town planning in Victoria which demonstrates the importance of the church to the community'. It is built from rarely used undressed random coursed sandstone from Point King Sorrento. It is located at 14 Acland Street, St Kilda. The triangular rose window is said to have been modelled on Lichfield Cathedral and shows outstanding craftsmanship. According to Heritage Victoria, the only other known example in Victoria is at St Georges Presbyterian Church in East St Kilda, designed by the same architect, Albert Purchas.colour photograph unmountedrose window, acland street, purchase, swyer, st kilda, christ church

Image taken on a bus trip, 26 November 1978. Christ Church was constructed in 1854-57 and designed in Decorated Gothic style by Albert Purchase & Charles Swyer. It was enlarged in 1874 and 1881 to the designs of Sydney W Smith. It is one of four main buildings constructed on land granted to the Church of England in 1855 and named Church Square. The other buildings are the bishop's residence, vicarage and parish hall. Heritage Victoria describes it as a 'rare and significant square in the history of town planning in Victoria which demonstrates the importance of the church to the community'. It is built from rarely used undressed random coursed sandstone from Point King Sorrento. It is located at 14 Acland Street, St Kilda. The triangular rose window is said to have been modelled on Lichfield Cathedral and shows outstanding craftsmanship. According to Heritage Victoria, the only other known example in Victoria is at St Georges Presbyterian Church in East St Kilda, designed by the same architect, Albert Purchas.colour photograph polaroidSKHS Bus trip 26/11/78 Christ Churchrose window, acland street, purchase, swyer, st kilda, christ church, churches

Plaque on the James Mallet Bennett memorial in O'Donnell Gardens, Built in 1926-7 by H B Corbett & Sons and designed by William H Lacey. Accompanied as engineer Sir Ross and Sir Keith Smith on the first flight from England to Australia 1919. Killed in aeroplane crash at Hendon England, 13th April 1922.colour photograph, unmountedIn Honoured Memory of Liet J.M. Bennett MSM AFM, of the Australian Flying Corps who accompanied as engineer Sir Ross and Sir Keith Smith on the first flight from England to Australia 1919. Killed in aeroplane crach at Hendon, England, 3 April 1922.aviators

St Kilda Library was designed in 1971 by Enrico Taglietti (1926-2019). It was to be constructed in two stages. Stage 1 was completed in 1973. Stage 2 as designed by Taglietti did not proceed. Instead, alterations were designed in 1992-93 by Ashton Raggatt McDougall Architects (ARM). In 1993-94, the floor area of the library was enlarged to include a new entry and disabled ramp and a pedestrian thoroughfare between Carlisle and Duke streets. The original entry was blocked and a bluestone 'book' wall was constructed west of the new entry.colour photograph unmountedSK Libraryst kilda library, enrico taglietti, arm architects

Prior to its demolition in 1979, the St Kilda Municipal Depot occupied a 1.2 hectare site at 33 Inkerman Street St Kilda. The land was initially purchased by the Council in 1867 as a site for a permanent market, which ceased to operate in about 1882. In October 1923, the Council discontinued the practice of disposing garbage by burial in tips when it opened a garbage incinerator at the Depot. After thirty years this incinerator had become both obsolete and objectionable to health and was replaced in March 1953 by American-designed Monohearth Garbage Destructor Units. According to the Council, these Destructor Units were the only ones of their kind in Australia and they removed all the objectionable features of garbage disposal (particularly for the employees). They were expected to serve St. Kilda's requirements for the next 80-100 years. In 1957 the Council said that the Destructor Units had 'enabled substantial economies to be effected in the annual costs and have proved a very successful venture. The Council now destroys the garbage from the City of Brighton, which pays for the privilege, and it is anticipated that other Municipalities will also take advantage of ihe benefits of this modern and, in Australia.' See 'City of St Kilda 1857-1957 A Brief Outline of Progress and Development' [82] In 1994, as a result of the local government amalgamation process combining the former Cities of Port Melbourne, South Melbourne and St.Kilda, the new City of Port Phillip owned three municipal depots. The St. Kilda municipal depot site became surplus to requirements and, in 1996, the City of Port Phillip resolved to use the site for a community housing project under the City of Port Phillip Housing Program. Colour photographCouncil Yards before demolition 1979st kilda, st kilda municipal depot, inkerman street, council depot, destructor

Fire at the building on 22 August 1981. The building was constructed in 1912 as a block of flats, designed and built by JRDaley, and it was renovated in the 1930s. After the fire, most of the rear of the building was demolished and replaced by modern apartments. Colour photographst kilda, majestic hotel, majestic, fitzroy street

The church was opened and dedicated on 7/12/1884, and completed in 1922. http://skhs.org.au/SKHSchurches/Sacred%20Heart%20Church.htmThe church is of architectural significance due to its Italian Renaissance Baroque Style, with red bricks, cement dressings and a slate roof. It indicated the abandonment of the Gothic Revival style favoured by Victoria's Roman Catholics and set the new style for subsequent Roman Catholic churches in Victoria. It was designed by Reed, Henderson & Smart. colour photographst kilda, churches, catholic churches, sacred heart

The St Kilda Presbyterian Church is now part of the St Kilda & Balaclava Presbyterian Church. Its first service was inaugurated by the Free Church Synod of Victoria in May 1855, in a building at the corner of High Street and Alma Road. In October 1855 the congregation moved to a wooden building in Inkerman Street, purchased from the Independent (Congregational) Church. The present church site was purchased and the first church opened in 1860. The foundation stone for the present church building, the second to be built on the site, was laid by the Governor of Victoria, Sir Henry Brougham Loch, on 27 January 1885. The building was opened on 30 May 1886. Wilson and Beswicke were the architects. Ralph Wilson designed the Methodist church on the corner of Princes and Fitzroy Streets and lived diagonally opposite the Presbyterian church. Charles Beswicke had toured Britain and the Continent in 1886 armed with a camera and returned to Australia with photographs of what he considered the greatest examples of architecture. He was responsible for the town halls in Brighton, Malvern, Hawthorn and Essendon and Wesleyan churches in Camberwell and Dandenong. Thomas Corley was the builder. The lofty spire was ‘a landmark to the mariner’ used by sea captains sailing up Port Phillip Bay. On a prominent position, the highest point in St Kilda, the church attracted wealthy people with legal, merchant and pastoral backgrounds.colour photographst kilda, churches, presbyterian church, balaclava

Built c 1847 for Samuel Jackson. May contain examples of early prefabricated building materialscolour photograph, unmounted, good conditionstuck on the back with adhesive tape: Now used as a special accommodation, this gable-fronted house was designed and built in the 1840s by architect Samuel Jackson. It is believed to contain early examples of prefabricated building materials

Army Unit Colour Patches were worn as a distinguishing unit indication at the top of each sleeve from 1916.The 8th Light Horse Regiment was formed as part of the 3rd Australian Light Horse Brigade, 3rd Contingent and attached to the Australian Division. Made up of men drawn from the 3rd Military District [Victoria], the 8th Light Horse Regiment was established at the Broadmeadows Training Camp in Melbourne, Victoria. The Army Unit Colour Patches (UCP) were orginally designed in a simple manner,allowing other member to easily identify the member's unit, division and battalion. A UCP is worn on the puggaree of the slouch hat whilst the Unit Shoulder Patch will incorporate the UCP normally with a border showing the unit's superior HQ. Horizontally aligned rectangular colour patch for 8 Light Horse Regiment, AIF, divided diagonally yellow (left) below light blue.Nilwwi, world war 1, light horse, 8th regiment

This program was created to accompany the school production of Smithy, held at Altona Civic Theatre, August 14 -16, 2003. The production was directed by Michael Waugh. Assistant director - Lyn Renwood. Stage Manager - Annie Rodoni. "Smithy" logo designed and created by Ben Moore, front cover artwork and design by Ben Moore, Michael Waugh, Lyn Redwood and Andrew Cohn. "Graffiti wall" graphic designed and created by Lyn Redwood.An A4 stapled publication. Front and back covers are colour. 8 p. : ill.williamstown high school, michael waugh, ben moore, lyn renwood, andrew cohn, school production, smithy, program

Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘70 in Osaka and travelled to Osaka several times in 1969-1970. Boyd designed the innovative Space Tube, which had over 25 exhibition boxes, projecting from it. Amongst the topics covered were Australian scientific innovation (including brain research, immunology, Antarctic research, Snowy Mountains Hydro-Electric Power Scheme, rainmaking, and the night sky), Australian sport, house interiors, car manufacturing, Australian music and art, and Japanese-Australian relations.Colour slide in a mount. Expo '70, Osaka, JapanMade in Australia / 11 / MAY 70M3 / 40 (Handwritten)expo 70, osaka, robin boyd, slide

Robin Boyd travelled to the USA and Britain for several weeks. He attended the opening of the new Australian Chancery in Washington DC, where he had designed an innovative exhibition with cylindrical display cases and sound recordings.Colour slide in a mount. Chicago Federal Center, Chicago, Illinois, USA, 1958-1974. (Architect: Mies van der Rohe.)Made in Australia / 13 / JUL 69M2 / Encircled 15 (Handwritten)slide, robin boyd

Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘70 in Osaka and travelled to Osaka several times in 1969-1970. Boyd designed the innovative Space Tube, which had over 25 exhibition boxes, projecting from it. Amongst the topics covered were Australian scientific innovation (including brain research, immunology, Antarctic research, Snowy Mountains Hydro-Electric Power Scheme, rainmaking, and the night sky), Australian sport, house interiors, car manufacturing, Australian music and art, and Japanese-Australian relations.Colour slide in a mount. Expo '70, Osaka, JapanMade in Australia / 13 / MAY 70M3 / 36 (Handwritten)expo 70, osaka, robin boyd, slide

Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘70 in Osaka and travelled to Osaka several times in 1969-1970. Boyd designed the innovative Space Tube, which had over 25 exhibition boxes, projecting from it. Amongst the topics covered were Australian scientific innovation (including brain research, immunology, Antarctic research, Snowy Mountains Hydro-Electric Power Scheme, rainmaking, and the night sky), Australian sport, house interiors, car manufacturing, Australian music and art, and Japanese-Australian relations.Colour slide in a mount. Canadian Pavilion, Expo '70, Osaka, Japan. (Architect: Arthur Erickson, with Geoffrey Massey)Made in Australia / 10 / MAY 70M3 / 6 (Handwritten)expo 70, osaka, robin boyd, slide

Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘70 in Osaka and travelled to Osaka several times in 1969-1970. Boyd designed the innovative Space Tube, which had over 25 exhibition boxes, projecting from it. Amongst the topics covered were Australian scientific innovation (including brain research, immunology, Antarctic research, Snowy Mountains Hydro-Electric Power Scheme, rainmaking, and the night sky), Australian sport, house interiors, car manufacturing, Australian music and art, and Japanese-Australian relations.Colour slide in a mount. Toshiba-IHI Pavilion, Expo '70, Osaka, Japan. (Architect: Kisho Kurokawa.)Made in Australia / 31 / MAY 70M3 / 12 (Handwritten)expo 70, osaka, robin boyd, slide

Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘70 in Osaka and travelled to Osaka several times in 1969-1970. Boyd designed the innovative Space Tube, which had over 25 exhibition boxes, projecting from it. Amongst the topics covered were Australian scientific innovation (including brain research, immunology, Antarctic research, Snowy Mountains Hydro-Electric Power Scheme, rainmaking, and the night sky), Australian sport, house interiors, car manufacturing, Australian music and art, and Japanese-Australian relations.Colour slide in a mount. Mitsubishi Pavilion, Expo '70, Osaka, JapanExpo'70 / Mitsubishi Pavilion / 16 (Handwritten)expo 70, osaka, robin boyd, slide

Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘70 in Osaka and travelled to Osaka several times in 1969-1970. Boyd designed the innovative Space Tube, which had over 25 exhibition boxes, projecting from it. Amongst the topics covered were Australian scientific innovation (including brain research, immunology, Antarctic research, Snowy Mountains Hydro-Electric Power Scheme, rainmaking, and the night sky), Australian sport, house interiors, car manufacturing, Australian music and art, and Japanese-Australian relations.Colour slide in a mount. Interior, Takara Beautilion, Expo '70, Osaka, Japan. (Architect: Kisho Kurakawa.)Made in Australia / 34 / MAY 70M3 / 43 (Handwritten)expo 70, osaka, robin boyd, slide

Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘70 in Osaka and travelled to Osaka several times in 1969-1970. Boyd designed the innovative Space Tube, which had over 25 exhibition boxes, projecting from it. Amongst the topics covered were Australian scientific innovation (including brain research, immunology, Antarctic research, Snowy Mountains Hydro-Electric Power Scheme, rainmaking, and the night sky), Australian sport, house interiors, car manufacturing, Australian music and art, and Japanese-Australian relations.Colour slide in a mount. Quebec Pavilion, Expo '70, Osaka, JapanMade in Australia / 16 / MAY 70M3 / Encircled 18 (Handwritten)expo 70, osaka, robin boyd, slide

Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘70 in Osaka and travelled to Osaka several times in 1969-1970. Boyd designed the innovative Space Tube, which had over 25 exhibition boxes, projecting from it. Amongst the topics covered were Australian scientific innovation (including brain research, immunology, Antarctic research, Snowy Mountains Hydro-Electric Power Scheme, rainmaking, and the night sky), Australian sport, house interiors, car manufacturing, Australian music and art, and Japanese-Australian relations.Colour slide in a mount. Canadian Pavilion (foreground, Architect: Arthur Erickson, with Geoffrey Massey), Australian Pavilion (background, Architect: James MacCormick ), Expo '70, Osaka, JapanMade in Australia / 6 / MAY 70M3expo 70, osaka, robin boyd, slide