Used by Melbourne tramways to assist tram drivers in driving through critical areas, such as providing clearance marks at turnouts, cross-overs, and stopping points. See item 1188 for a guidebook. Demonstrates the method of providing road marking systems to drivers.Stainless steel object square shape with a machine punched and formed prong to enable it to be placed and secured into the ground. Item has been used and has bitumen road materials attached to it.signs, tramways, drivers, stud markings, instructions

Provenance not clear. Leather case has 'MMBW' inscribed in black pen, indicating an association with Melbourne Metropolitan Board of Works. Item has been in the possession of Terry McCormack since 1972Hand held brass pocket inclonometer level, circa 1920. Leather case for safe storage. Semi circular graduated dial with 90 degree vernier scale with a small (20mm) magnifying glass to aid reading the vernier scale. Above the body, mounted at the rear of the graduated dial, is a spirit level tube which is tilted by finger movement to the milled hand wheel. The height to be determined is sighted through the instrument eyepiece and the bubble tube is tilted until the bubble, viewed in the mirror inside the sighting tube, is brought level with the graticule sighted at the top of the subject object. An angle is thus obtained and by measuring the distance on the ground to the object, trigonometry can be applied to determine the height of the object.Herga & Co. BRISBANE. Made in England

Brown leather-covered board binding with embossed patterns on covers and spine. Gilt letering on spine.

How widely the prisoptometer was used is unclear but the Standard Optical Company later patented a new model, The Standard Prisoptometer, on June 21, 1904. Edward Jackson's crossed cylinder technique of determining astigmatism was first detailed in the Transactions of the American Ophthalmological Society (1887)4:595-598. The convenience of Jackson's crossed cylinder lenses over the prisoptometer in weight, cost, portability and reliability meant that they were soon almost universally adopted.This is a rare item as few are known world wide.This instrument is an optometer, that is, a device to measure the refractive error of an eye. It is made of cast iron, steel, brass and glass. It contains a prism which could be rotated, and was used to view a disc or an object circle. The prism caused monocular doubling of the object circle and the separation of the two images varied as the prism rotated, depending on the astigmatism present. The axis of the astigmatism was indicated by the prisoptometer and trial lenses were used to determine the the magnitude of the spherical and cylindrical refractive errorImprinted:"DR CULBERTSON'S PRISOPTOMETER/ GENEVA OPTICAL COMPANY MAKERS, GENEVA, N.Y./ PATENTED SEPT, 21, 1886". Stamped "853" on eyepiece and lens mounting.optometry, prisoptometer, optometer, astigmatism, refractive error, refraction, culbertson

Black vinyl covered Museum Regster. Contains records of the BHS items held at the BHS Museum in Eaglehawk. Five ruled columns across two pages. Headings: Registration Number, Object name and brief description, Acquisition Date, Acquisition Method, Name and Address. Forty seven pages filled in with only two columns completed - Registration Number and Object name and description. No other details completed. Approximately one third of the book used.organization, society, bendigo historical society

No information is available regarding this item and it is not known who ‘H.W.’ is. Silver serviettes such as this one were common household items and common wedding presents in the early 20th century. The fact that this one is silver and is monogrammed suggests that it came from an affluent family. It may have been one of a set. Serviette rings are still used today, especially for formal dining occasions. This item is of interest in that it is an example of dining customs in the early 20th century. It is a display item.This is a circular silver object used to hold a folded serviette. It has four hallmarks which indicate it is British made and it has a monogram, ‘H.W.’ It is slightly tarnished and has some small dents. ‘H.W.’ (or ‘W.H.’)serviette ring, warrnambool

This lead shot mould would have been used by those people wanting ammunition for shotguns. The moulds were probably originally used in a blacksmith’s forge. Although it has no known local provenance, this lead shot mould is of interest as an example of an early tool. This is a metal tool with handles in the shape of calipers with a rounded ball of metal at one end. The ball is split in the middle to allow molten material to be inserted for casting into lead shot. The object is heavily rusted.‘16’history of warrnambool, vintage tools

Object. Recording of Golden Square Choir. Two 78 RPM recordings of the Golden Square Choir Performances recorded by Warne A Wilson Radio Service Ballarat with playing instructions and special needles.audio-visual technology, audio accessories, golden square choir, gertrude perry collection, 78 rpm recordings, golden square choir, warne a wilson radio service

(i) Three copies of a handwritten document detailing the contents of Dudley House. (ii) A torn piece of paper with blue handwriting and with the name Elaine Buckland at the top. It is followed by a list of objects and furniture.buildings, residential, dudley house, lydia chancellor, collection, buildings, dudley house, furniture, objects

Objects. Token for G & W.H. Rocke , 18 Lonsdale Street, Melbourne. English Furniture Importer, with a Lion and shield on front. On reverse Melbourne, Victoria, 1859, person seated holding scales.numismatics, tokens, g & w h rocke, they used to live in another house in golden square, which was the site of a chinese market garden in the 1800's.

Object. Token. To commemorate their Majesties Coronation of King George V and Queen Mary, 22 June 1911, Victoria. Peace and Prosperity under Coat of Arms. Images of both on back of Token.numismatics, tokens, king george v & queen mary

Object. Childrens musical toy record player. Key wound in tin box with illustrations of fairy-tale characters around sides. Labelled Bing Pigmy Phone, Bavaria. With on off switch.D.R.P., D.R.G.M., BRIT PATENT APPLIED FOR.. USA PATENT APPLIED FOR REGtoys, general, bing pigmy phone

Part of oval metal buckle or clasp. Engraving in relief depicts a two cricket bats, a ball and a set of stumps. A fancy frame surrounds the objects. Item is rusted and part of the frame is missing.bendigo, gold mining, qc binks

Object. Milk white glass jar with tin screw lid. Paper label reads Cockings Almond Cream.A delightful skin food. J.J. Cocking, Chemist Bendigo. Complete with contents.W.T.Co. 1213Q U.S.A.medicine, first aid, almond cream

Semi circular, round metal object with flat and blunt on one end, sharp point on the other end. Below the sharp point is a round hole or eye in the neddle. Threaded with a piece of twine.None

Two part object (two identical racquets). Two white Stewart Graphite tennis racquets. Clear plastic wrap on both handles. Materials: Metal composite, Plastic, Nylon, Leathertennis

Small object with tapered wooden handle and a metal (smoking) pipe/cup like end. Hollow inside metal section and slightly battered. Wooden handle has black flaking paint.

These items were found in a house being demolished in Mt Beauty in 2021Very relevant to the history of the Tawonga District General Hospital and Social history of Mt BeautyAll papers have the heading "Tawonga District General Hospital". Small booklet "Constitution Objects and By-Laws, 19th Annual Report 1967/68. Letter head sheets of white papertawonga district general hospital mt beauty

Wooden glove stretchers were used in the early 1900s in the production and manufacturing of leather gloves to stretch the finger inserts in gloves and gauntlets. Long wooden object, comprising two shafts joined at centre with metal ball and hinge. Both wooden shafts have decorative linework engraved at centre point. Approximately 25cm in length.glove stretcher, haberdashery, manufacturing, clothing accessory, tool, glovemaking, early 20th century

No information is available on this item but heel protectors were commonly used by householders in the early to mid 20th century to protect shoes from scuffing and damage caused by the wear and tear of frequent use. The protectors were usually put on the boots or shoes by a member of the family. They were commonly used until the 1950s. This item is of some interest as an example of the custom in the early 20th century of using heel protectors on boots and shoes. It is a useful display item. This is a metal object in the shape of a shoe heel (semi-spherical). It has five holes to put in screws to attach to the heel of a shoe or boot. It is silver in colour and has grooves across the surface to prevent slipping. heel protector, shoe

This wooden boomerang has been made to promote the Boomerang Club in Warrnambool and to use as a decoration at the Boomerang Club functions. The Warrnambool Boomerang Club was a social club formed in 1934 and it continued until at least 1953. The club had over 200 members enrolled by the late 1930s. The club organized regular activities, including monthly dances, an Annual Ball, Christmas parties, picnics and dinners. Profits from the activities were donated to local charities with over £600 being donated in 1946. This boomerang is of interest as a memento of the Boomerang Club, a social club in Warrnambool in the 1930s, 40s and 50s. This is a wooden boomerang painted brown with white and red lettering on the boomerang face and a white border along the edges. The red paint is fading. There is a small hole at the top for attaching the boomerang to a wall or other object. ‘Boomerang Club.’ history of warrnambool, boomerang club, warrnambool

An induction coil consists of two coils of insulated copper wire wound around a common iron core. One coil, called the primary winding, is made from relatively few (tens or hundreds) turns of coarse wire. The other coil, the secondary winding, typically consists of many (thousands) turns of fine wire. An electric current is passed through the primary, creating a magnetic field. Because of the common core, most of the primary's magnetic field couples with the secondary winding. The primary behaves as an inductor, storing energy in the associated magnetic field. When the primary current is suddenly interrupted, the magnetic field rapidly collapses. This causes a high voltage pulse to be developed across the secondary terminals through electromagnetic induction. Because of the large number of turns in the secondary coil, the secondary voltage pulse is typically many thousands of volts. This voltage is often sufficient to cause an electric spark, to jump across an air gap separating the secondary's output terminals. For this reason, induction coils were called spark coils. The size of induction coils was usually specified by the length of spark it could produce; an '8 inch' (20 cm) induction coil was one that could produce an 8 inch arc. (http://en.wikipedia.org/wiki/Induction_coil)A metal and plastic object on a timber stand. In an induction coil the distance between the plates is often used to measure the voltage of the spark since the air breaks down at 30 000 volts per centimetreballarat college of advanced education, scientific instrument, induction coil, scientific instruments, electricity

A ship's compass played an extremely important role in navigating the ship from the port to its destination. If there was a slight inaccuracy in its calibration the ship could miss its destination and crash or be wrecked. The Falls of Halladale was an iron-hulled, four-masted barque, used as a bulk carrier of general cargo. She left New York in August 1908 bound for Melbourne and Sydney. In her hold was general cargo consisting of roofing tiles, barb wire, stoves, oil, and benzene as well as many other manufactured items. After three months at sea and close to her destination, a navigational error caused the Falls of Halladale to be wrecked on a reef off the Peterborough headland on the 15th of November, 1908. The captain and 29 crew members survived, but her cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. The Court of Marine Inquiry in Melbourne ruled that the foundering of the ship was entirely due to Captain David Wood Thomson's navigational error, not too technical failure of the Clyde-built ship. The Falls of Halladale was built in1886 by Russell & Co., at Greenock shipyards on the River Clyde, Scotland for Wright, Breakenridge & Co of Glasgow. She was one of several designs of Falls Line of ships named after waterfalls in Scotland. The company had been founded between 1870- 1873 as a partnership between Joseph Russell, Anderson Rodger, and William Todd Lithgow. During the period 1882-92 Russell & Co. standardised designs, which sped up their building process so much that they were able to build 271 ships during that time. The Falls of Halladale had a sturdy construction built to carry maximum cargo and able to maintain full sail in heavy gales, one of the last of the 'windjammers' that sailed the Trade Route. She and her sister ship, the Falls of Garry, were the first ships in the world to include fore and aft lifting bridges. Previous to this, heavily loaded vessels could have heavy seas break along the full length of the deck, causing serious injury or even death to those on deck. The new, raised catwalk-type decking allowed the crew to move above the deck in stormy conditions. The Falls of Halladale shipwreck is listed on the Victorian Heritage (No. S255). She was one of the last ships to sail the Trade Routes from Europe and the Americas. Also of significance is that the vessel was one of the first ships to have fore and aft lifting bridges as a significant safety feature still in use on modern vessels today. The subject model is an example of an International Cargo Ship used during the 19th and early 20th centuries to transport goods worldwide and represents aspects of Victoria’s shipping industry. The compass sections are also significant for belonging to the compass of the Falls of Halladale. It was a critical part of the ship's equipment. Compass sections, two; brass disc with a round object on a pedestal, together with a glass disc with a metal frame and insert in the centre. Both items were recovered from compass on the wreck of Falls of Halladale. Nonewarrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, compass sections, falls of halladale, wreck of halladale, ship compass

Used at School of mines and industries Ballarat As H.V. McKay's Sunshine Harvester business expanded there was a requirement for a school to train the company's apprentices. In 1911, H.V. McKay wrote to the Victoria Cabinet offering 2,000 pounds and 4 1/2 acres of land in Derby Rd for a technical school, On the 7th July 1913, the new Sunshine Technical School opened with a wooded administration building with six class rooms and a large galvanised iron workshop for the trade apprentices. Mr George Baxter was appointed principal with assistant teachers, A.J. Dunlop (Maths & English), W.W. Anderson (Art) & H.B. Ernest (Maths & Science). Seventy students were enrolled in the first year of which 44 were apprentices from the Harvester Works. During the First World War Years (1914 - 1918) there was a difficulties with staffing and enrollments. The school was also used to provide vocational training for wounded returned soldiers. In 1919 during the great influenza epidemic the school was used as a hospital. ​Light blue soft covered booklet of 60 pages with information about office bearers, staff, objects of the school, prizes and scholarships, examinations, time tables, courses, and subjects. It has photographs and advertising.sunshine, technical school, sunshine technical school, prospectus, hugh victor mckay, r.m. lambert, george mckay, d.b. ferguson, samuel mckay, george bult, ralph mckay, george butlin, george baxter, f.s. midgley, j.b. gray, w. kerr, a.j. dunlop, h. ernst, w.w. anderson, f. cleary, school councillors, staff, blacksmithing, carpentry, fitting and turning, moulding, sheet metal, mathematis, english, science, art, 1914, h v mckay, sunshine harvester, 2000 pounds and land donated, wounded returned soldiers, 1919 ued as hospital, influenza epidemic

Pointing bones were ritualistically used by sorcerers for magic. The 'magic' and 'sorcery' from 'pointing the bone' can involve the ritual removal of organs from the body, done when a person is asleep, and then put back into the person unknowingly. In this way a person can be 'sung' but will be unaware of it. This pointing bone was originally given to Sir Wilfred Fish, FRCS, who was a Kings Surgeon and had been giving lectures in Sydney in the 1920s on his specialty, maxillofacial surgery. His daughter, Mrs Vivian Greaves, gave this item to Sir Keith Drayton some years later. Pointing bone, from Central Australia. The object is a carved macropod fibula. At one end there is a blob of resin and an attachment of human hair in a string. At the other end, the bone has been sharpened to a point.

The advent of anaesthesia posed immediate problems for the oral surgeons and dentists who were used to operating on awake patients with intact airway reflexes. Early anaesthetics were very light and often created an uncooperative patient. Dentists were quick to complain they had trouble opening the mouth quickly enough and dental props soon made an appearance. Gags and tongue depressors proliferated, all initially devised to improve surgical and anaesthetic access, not to protect the airway. Other instruments for opening the jaws included the somewhat fearsome devices known as mouth openers. Heister's mouth opener was incorporated in anaesthetic practice but was not designed for this purpose. Lorenz Heister (1983 - 1758) used his device for mouth inspection and for operations on the palate, tonsils and teeth in the pre-anaesthesia era. He was not impressed with the way it was used by others in his life time and believed that it overstretched the jaw when used inappropriately. Despite its apparent brutality, the Heister mouth gag was still advertised for sale in 1983 and its useful mechanism has been incorporated into modern surgical retractors.Steel cork-screw shaped object with a twist top handle which will force the two arms apart. Each arm has ribbing toward the end to create friction when inserted in the mouth.Stamped into the twist top handle: MAYER & MELTZERheister, mouth gag, mouth opener