Donald & Co. Paddington, Sydney, Patent No. 4. Serial No. 87086 wool press. From the Penna's property at Meredith.Wood and metal wool press. No. 87086 / DONALDS / PATENT / No. 4 / WOOL PRESS / PADDINGTON / SYDNEY / TRADE / DONALDS / MARKwool growing wool brokering wool bales, donald and co., wool press, wool growing, wool brokering, wool bales

Very old. Ref. Pages 6 and 7 Tools for all Trades Catalogue. The braces vary in quality (strength) depending on what materials are used to make them.The brace is a hand operated tool for boring holes in wood, consisting of a crank-shaped turning device. The brace that grips and rotates the hole-cutting tool, the bit.Used by woodworkers in the Kiewa Valley.Vintage hand drill braces. All different and not all complete. Made of cast iron, steel with wooden handles. The drills fit into one end of the brace which is turned to make a drilling motion. A brace is a hand tool used with a bit (drill bit or auger) to drill holes, usually in wood. Pressure is applied to the top while the handle is rotated.brace and bit, woodwork, hand drilling

This timber fragment is from the shipwreck of the SCHOMBERG (1855). The bow of the ship broke off after an unsuccessful salvage attempt to tow her off the Peterborough reef. At the wreck-site the submerged hull points north towards the beach but the front section is missing. Parts of the bow have been carried away by the eastward bearing ocean currents and have come ashore on the western coast of New Zealand’s South Island. Don Charlwood writes in Wrecks & Reputations (1977) that in 1871 “a piece of wreckage over 20 feet long and 12 feet wide was brought out” by land from its remote location at Tauperika Creek. In 1875 “an even larger section was brought out by sea”. It was suggested at the time that these relics of a large wooden sailing ship were from the wreck of the SCHOMBERG some 20 years earlier on the Victorian coast. “To corroborate the theory”, Charlwood continues, “a piece was sent to Halls of Aberdeen [the ship’s builders in Scotland]. They identified it as having come from the ship they had launched with such pride in 1852.” Charlwood, whose great-grandparents were passengers on the SCHOMBERG’s fateful maiden voyage, acquired some samples of the wreckage timber recovered in New Zealand, and brought them back with him to Australia. In 1976 “comparison was made of timbers from the New Zealand find and timber from the remains of the hull at Peterborough. They proved to be from the same ship.” The extraordinary journey of these pieces of wood from the once mighty clipper ship SCHOMBERG came to an end in 1984, when they were given to Flagstaff Hill by the author, and reunited with other shipwreck timbers and copper bolts from the vessel that are on display at the Maritime Village. The shipwreck of the SCHOMBERG is of State significance - Victorian Heritage Register S612A small piece of wood broken from the timbers of the shipwrecked clipper SCHOMBERG (1855, Peterborough) and retrieved from the southwest coast of New Zealand’s South Island. The artefact bears a reddish stain on exposed parts but the main surface is grey coloured. It appears to have been split off other wood fragments in the Flagstaff Hill collection (6257, 6259). It presents as a lighter less dense wood than oak, but may have lost mass through submersion.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, schomberg, shipwreck timber, don charlwood, ‘wrecks & reputations’

Guyetts and Sons is a family business that began providing funeral services in Warrnambool and South West Victoria in 1905. Today in 2019 the business is still in operation as Guyetts Funerals Warrnambool. This wooden coffin was used as a display model in the 1920s at Guyetts. Its simple six-sided design was an economical choice as it used less wood than the box-shaped coffins. This coffin is an example of coffin design in the 1920s in Warrnambool and South West Victoria. It is historically significant, representing a local business that began in the first decade of the 1900s and is still in operation today.Coffin made of polished wood with pressed, silver coloured metal decorations on top and along sides in several designs. Its shape is similar to the human body; wide at the shoulders and narrow at the feet. It has a six-sided base and a completely removable lid. The coffin was used as a display coffin by Guyett and Sons, funeral directors of Warrnambool, from the 1920s.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, coffin, display coffin, guyett funeral directors warrnambool, warrnambool 1920s, warrnambool 1905 business, funeral item, funeral service, funeral director warrnambool, funeral home, funeral arrangements, burial service, cemetery funeral, death, herse, cemetery supplies, funeral director supplies, mortuary equipment

Jim Archbolds house in Ingrams Road. Photographer Barry Philp lived at 1569 Main Road directly opposite the school. "The photo looks like it was taken from our place looking northwest to Jim's."research (vic.), house, ingrams road, jim archbold

A history of the Yarra Track taken from the notes of the Reverend George EdwardsPaperback. Photograph on front cover: On the Wood's Point Track early days. Photograph on back cover: Wood's Point Track.Stamp of the Marysville & District Historical Society Inc / P.O. Box 22 / Marysville 3779 Stamp saying-Limited Edition / No. 029 / of 200 copiesyarra track, wood's point

A history of the Yarra Track taken from the notes of the Reverend George EdwardsPaperback. Photograph on front cover: On the Wood's Point Track early days. Photograph on back cover: Wood's Point Track.Stamp of the Marysville & District Historical Society Inc / P.O. Box 22 / Marysville 3779 Stamp saying-Limited Edition / No. 072 / of 200 copiesyarra track, wood's point

A history of the Yarra Track taken from the notes of the Reverend George EdwardsPaperback. Photograph on front cover: On the Wood's Point Track early days. Photograph on back cover: Wood's Point Track.Stamp of the Marysville & District Historical Society Inc / P.O. Box 22 / Marysville 3779 Stamp saying-Limited Edition / No. 073 / of 200 copiesyarra track, wood's point

Grinding Wheel, with wood shaft through centre. Has nails in wood shaft to stop handle from pulling out.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, grinding wheel

Pyrograph on wood panel, of woman in c.1900 costume serving ball with tennis racquet. Materials: Wood, Pigment, Metaltennis

A wood fretwork paddle. Handle reinforced on both sides with fretwork panels attached with small screws. Materials: Wood, Metaltennis

Very smalll Real tennis racquet. Bare wood handle. Concave throat piece. Materials: Wood, Metal, Guttennis

Wright and Ditson wood tennis racquet. Green painted throat and green strings. Materials: Metal, Wood, Leather, Guttennis

Metal plate photographic negative image of unknown man. Metal plate fixed to wood block. Materials: Wood, Metaltennis

Metal plate photographic negative image of unknown man. Metal plate fixed to wood block. Materials: Wood, Metaltennis

Metal plate photographic negative image of Donal Ferguson. Metal plate fixed to wood block. Materials: Wood, Metaltennis

Metal plate photographic negative image of a Mr. Edwards. Metal plate fixed to wood block. Materials: Wood, Metaltennis

Cast iron and wood static type knife cleaner. Large screw connecting 2 pieces of wood. (Maker not shown).knife cleaners

Sports Clubs in Kew in the final decades of the 19th century and in the early 20th century were often umbrella organisations with facilities for a number of sports. Typically in Kew, this included teams in lawn bowls, tennis and croquet. The Kew Bowling Club was formed in 1880 while the privately owned Auburn Heights Recreation Club was opened in 1904. The croquet courts at the Kew Recreation Club were opened in 1906, two years after the Club's formation. By 1998, the two Clubs decided to amalgamate at the Auburn Heights site in Barkers Road, forming the Kew Heights Sports Club. The combined club was itself taken over by the Melbourne Cricket Club in 2012 becoming MCC Kew Sports Club. In 2017 MCC Kew closed and its landholding was subsequently sold to Carey Baptist Grammar School. Both the Kew and Auburn Heights Clubs assembled important collections. These historically significant and large collections were donated to the Society in 2020. The collections include manuscripts, pictures, trophies, plans, honour boards etc. References Barnard FGA 1910, 'Sports and Pastimes' in Jubilee History of Kew Victoria: Its origin & progress 1803-1910. Chapman J & C 1999, The history of the Auburn Heights Recreation Club, 1904 to 1908. Reeve S 2012, City of Boroondara: Thematic Environmental History, p.216.The combined collections of the four sporting clubs making up the collection number hundreds of items that are historically significant locally. They are also significant to the sporting history of the greater Melbourne area and to the sports of lawn bowls and tennis in Australia in the 19th and 20th centuries. The collection illuminates two of the Victorian historic themes - 'Building community life' through forming community organisations and 'Shaping cultural and creative life' by participating in sport and recreation.Croquet mallet, Shaft made of a number of separate rectangular sections of pale wood, mostly wrapped with cotton cord and strips of leather. The rectangular head is made of a darker heavier wood and it is banded with a strip of lighter wood.croquet -- mallets, croquet -- equipment, auburn heights croquet club, auburn heights recreation club

'Ting Tong Table Pole'Tennis' game. Made in Denmark. Contains two wood paddles, a wood pole and cloth tape as 'net' and two wood poles and bases to anchor net. 'Ball' is a large wooden bead held in a string pouch. Pouch attached by string to a wood rod which is to be place in holder at centre of net. Appears complete. Materials: Cardboard, Ink, Wood, Lacquer, Metal, Stringtennis

The Bentwood chair has been called ‘the world’s most popular chair’. The original Bentwood chair, was designed by German-Austrian cabinet maker and Master Joiner, Michael Thonet (b.1796 - d.1871) and introduced to the market in 1859. Thonet started his business in his home town of Boppard as an independent cabinet maker in 1819. In the 1830’s he began trying to make furniture from glued (laminated) and bent wooden slats. Over the next few years his attempts to patent this process failed in Germany, Great Britain, France, and Russia. He then began using lightweight, strong wood and bending it into elegant, comfortable furniture. The Bentwood technology took Thonet years to perfect. In simple terms, the wooden rods or lengths were wet by soaking or steaming, bent into shape and then held in place until they hardened into the moulded curved shape or pattern. The wood usually chosen for the bentwood chairs was maple or beech. Thonet had revolutionised an older process by industrialising the process. The dowels of wood were cut and prepared as components of furniture, treated by the ‘bentwood’ process, then ready immediately for assembling with very little extra workmanship needed. Thonet held 2 patents for this process, the second one ended on 10th July 1869 and was non-renewable. At the Trade Fair at Koblenz of 1841 Prince Klemens Wenzel von Mettemich was very impressed with Thonet’s furniture, especially the chairs. In 1842 Thonet sold his Boppard business and emigrated to Vienna, and began working, along with his sons, on the interior decoration of the Palais Leichtenstein, for the Carl Leistler establishment. In 1849 he began his own business again, the Gebruder Thonet to include his sons (translated “Brothers Thonet”). He produced the “No. 1” Bentwood chair. He received a bronze medal for his Vienna bentwood chairs at the World Fair in London in 1851, and a silver medal in Paris in 1855. In 1856 he opened a new factory in Koritchan (Moravia), where there were extensive woods of beech trees available for his enterprise. In the next years, five more Eastern European production sites were established in Bystritz (1862), Nagy-Ugrócz (1866), Wsetin (1867), Hallenkau(1867) and Nowo-Radomsk(1880). Thonet’s 1859 No. 14 “chair of chairs” (or “Konsumstuhl Nr. 14” – coffee shop chair no. 14) was the most famous of all of Thonet’s Bentwood chairs. In 1867 he received a gold medal at the Paris World Fair. This new style of furniture making became very popular. Up until 1830 50 million of these chairs had been produced. By the 1870’s Thonet owned offices in almost 20 countries, with sales locations across Europe, in Chicago and New York. In 1889 he set Thonet set up a head office in Frankenberg, Hesse. Bentwood models designed in the mid to late 19th century featured hand-caned or laminated wood seats and were usually stamped with the country of origin. The Bentwood elements were the backrest, seat rim and legs. Typically the seat was covered with ‘bucket’ leather. After the Patent ran out in 1869, companies such as Jacob & Josef Kohn began the production of bentwood furniture.The popularity of the Bentwood chair that was introduced by Michael Thonet in the 1850s is due to its versatility and timeless quality. Its style, whether varnished or painted, suits any room in the house. The lightweight chairs are also popular for café and restaurant seating, as well as for public gatherings. They can be easily moved around and grouped in a variety of ways to suit any occasion.Chair, bentwood, pair of two. Backrest has full length inverted U inside frame. Support rail and wire reinforcing between legs. 3692.01 seat has floral pattern pressed into wood 3692.02 seat is plain (replacement seat). Made by Harnison & Co.3692.01 chair's marks; Label ""HARNISON & CO./ NEUSOL / BUDAPEST" and "WIENER NOBEL" and "(symbol) N inside circle, under Crown" flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, domestic furniture, dining furniture, bentwood chair, harnison & co., neusol, budapest, wiener nobel

Pattern-Stern gland round wood object with diamond shaped piece of wood at centre and hat type top with hole inside. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, pattern-stern, stern, stem pattern

Belonged to H.J.B.Burrell (Harry) BEM, MM, VX 59659. Refer 290, 296.2P, 297.2P, 298.4. Baton, polished wood, tapered shape with brass ring at small end. 'At the large end is a Armoured Corp badge set into the wood.accessory, military baton

Used for water reticulation used in Portland up until the 1970's and 80's when the wooden mains were replaced. This section was 'rescued' from the municipal tip and donated by Mr. Iain Gran and Mrs. Ann Grant.Material - wood, five segments held together by a spiral of steel, wrapped externally. The wood expanded to form water-tight pipe.

ANZUK Force was formed and served in Singapore and Malaya ANZUC Force grew out of ANZUK Brigade at a time when Britain assumed prime responsibility for the dedence of Malaysia and SingaporePlaque shape, wood painted brown, metal cover on top of the wood with the insignia of all Forces involved in ANZUK Force SingaporeInsignia engravings of forces involved in ANZUK Force Singaporeanzuk, brigade, force, malaya, singapore,

Builders used these clamps to lay and secure floor boards when building houses in the Moorabbin area in 20thCThese floor board clamps are typical of the type used by builders in the new housing estates of City of Moorabbin in the 20thC2 Long pieces of wood with space holes, in which steel wedge plates are inserted and large steel screws at the top of wood.

8707.1 - This is a stamp made of predominately wood. The knob-like handle is painted black where as the rest is either naked or stained wood.8707.1 - This A/C is PAST DUE we have sent you several statements calling attention to it unless you give this one prompt consideration we shall be compelled to place the A/C in the hands of a collector

Georg Chodziesner made this chanukiah in Hay Camp in 1940. It was made to celebrate the Jewish festival of Chanukah. Georg was born in 1900 in Berlin to a prominent Jewish advocate Justizrat, Ludwig and wife Elise. Fearing arrest at the outbreak of war, Georg fled Germany to the United Kingdom. His wife, Dorothea, and son, Wolfgang Benno, emigrated to Chile. Like many German Jewish men, Georg found himself on board the HMT Dunera, bound for interment at Tatura. On release, Georg joined the Australian Army 8th Employment Company in which he served for the remainder of the war. Georg sought permission for his son to join him in Australia, and the pair were reunited in Melbourne in May 1945. Dorothea had passed away from illness in 1943. After settling in Australia, Georg worked as a Patent Attorney and remained working at the same firm until his death in 1981.This Chanukiah was cut from a kerosene tin using nail scissors and mounted on a wood block base. Medium: Wood, tin and ink The Chanukiah is embossed with a Magen David, the Star of David, and the wooden base has a poker work inscription: "Hay 5701 / 1940".dunera, wwii, internment, jewish history & people

Handmade by internee at Camp 33 buttons made of polished, grained wood. Circular on slightly larger wood base. Mounted on a piece of card through shanksbuttons, wood, ruff, h, camp 3, tatura, costume, accessory, clothes