Showing 12739 items
matching parade
-
Ballarat Tramway Museum
Ephemera - Membership Card/s, Ballarat Tramway Museum (BTM), Jun. 2010
Colour photograph printed onto white card as a BTM Membership card for 2010 - 2011. Photo of the horses tram operating during the Heritage Festival weekend - see Reg item btm4648i7. Has the words "Ballarat Tramway Museum" in white block printing on the lower edge of the card. On rear along bottom edge, has words "Horse Tram No. 1, Heritage weekend 2010 - Photo P. Winspur." The photo is actually Bruce Dixon's. Two copies held. No label on rear. .trams, tramways, btm, membership cards, horse tram -
Ballarat Tramway Museum
Pamphlet, Warren Doubleday, "Welcome Aboard", Aug. 2010
Printed colour version of BTM "Welcome Aboard" pamphlets for handing out to passengers on trams. Features photos of 26, 38, 1 & 14 and interior photo ex 26 and text describing "Your Trip", the trams, Ballarat Tramways, and the museum itself and has maps of the Ballarat system and the Gardens area. See Reg. items 712 and 1532 for details of earlier productions. Item folded as presented to a passenger. Map revised to be more extensive and some minor text revisions to earlier layouts. Sponsor - GVGT added. Printed in colour on plain white paper. 3 copies held.trams, tramways, btm, handouts, passengers, pamphlets -
Ballarat Tramway Museum
Book, City of Ballarat, "Ballarat Heritage Walking Trails", 2010
Booklet - 36 pages, full colour photographs, titled "Ballarat Heritage Walking Trails", providing details of three heritage walking trails around the central portion of Ballarat. Gives a short description and photograph of the buildings or locations. Has a map in the centre pages. The walking trails: CBD Heritage Lydiard St Heritage Sturt St statuetrams, tramways, lydiard st, sturt st, ballarat, heritage -
Ballarat Tramway Museum
Slide - 35mm slide/s, Eldon Hogan, Oct. 1966
Colour slide of four Birney Trams on the North Bendigo line, Oct. 1966, SPER Tour, lead by tram No. 11, followed by No. 30. People alongside the tram on a wet day. Photographer Eldon Hogan, AGFA Slide, blue plastic with white plastic on reverse.In ink "SPER Bendigo Oct. '66"tramways, trams, sper, bendigo, birney, tram 11, tram 30 -
Ballarat Tramway Museum
Slide - 35mm slide/s, Eldon Hogan, mid 1970's
Colour slide of Birney tram No. 30 at the North Bendigo Terminus in Bendigo Trust colours, mid 1970's and a SEC Bogie tram behind. Possibly on an ARE tour. Photographer Eldon Hogan, AGFA Slide, blue plastic with white plastic on reverse.tramways, trams, sper, bendigo, birney, north bendigo, tram 30 -
Ballarat Tramway Museum
Photograph - Black & White Photograph/s - set of 32, Eldon Hogan, 4/06/1965 12:00:00 AM
Yields information about a 1924 Jelbart Engine manufacturing display in Sturt St and the street scene and peoples clothing at the time.Set of 32 black and white photographs of an Association of Railway Enthusiasts tour to Bendigo and trams 4/7/1965. The photos are not necessarily in photographic order. .1 - 30 on the Eaglehawk terminal track, beyond the normal terminus. .2 - 30 & 29 High St Eaglehawk. .3 - ditto with a poppet head in the background. .4 - 30 at one of the crossing loops .5 - 30 at Eaglehawk terminus extension .6 - ditto. .7 - ditto .8 - cleaning out the track .9 - showing the location of the track at Eaglehawk terminus and its extension .10 - cleaning out track .11 - a portable shed adjacent to the track .12 - A view of the two Birneys travelling in the empty country. .13 - ditto .14 - 19 and 18 at Golden Square .15 - Bendigo tram depot - creek crossing .16 - Scrubber at the depot .17 - 28 and 19 at the North Bendigo terminus .18 - 18 and 30 on the Golden Sq line .19 - 28 and 19 at the North Bendigo terminus .20 - ditto. .21 - 28 and 19 near the depot entry. .22 - 28 and 30 Pall Mall .23 - 28 at North Bendigo .24 - 17 and 19 and 6 at Quarry Hill .25 - 28 and 30 Mitchell St .26 - 19, 6 and 21 Quarry Hill .27 - 19 and 6 Quarry Hill .28 - 28 and 6 at the depot entry .29 - ditto .30 - 18 and 30, Golden Sq line .31 - 25 at depot .32 - 6 and 19 Charing Cross. Photographer Eldon Hogan. Printed on Kodak Paper .33 - roll of negatives of some of the above photos - stored in box 83 as well. trams, tramways, are, bendigo, eaglehawk, quarry hill, golden square, north bendigo, tram 30, tram 29, tram 28, tram 6, tram 19, tram 25, tram 17, tram 18 -
Ballarat Tramway Museum
Domestic Object - China dish, Shelley, mid 1920's
Yields information about the appearance through a drawing of Sturt St in the mid 1920's and yields information about the manufacture of china dishes with images in the bowl of the dish.White china dish, fluted sides, with a gold rim, flat base with a transferred image of Sturt St from Grenville St early 1920's with an ESCo tram arriving at the Grenville St terminus and two other trams in the view. Looks west along Sturt St. One of a series of dishes made for R. Tunbridge and Sons (see images of other dishes) by Shelley, England. i3 and i4 - of another dish held by the donor - Andrew Mitchell - shows the manufacturing details. - See Reg Item 7214 for another dish with the same image. See correspondence with Grania Poliness with Alan Bradley - printed copy with worksheet file. Stored in box 20A, within its own separate box wrapped with tissue paper. tramways, trams, crockery, sturt st, esco -
Ballarat Tramway Museum
Manual - Procedure, State Electricity Commission of Victoria (SECV), "Graphical Location of Trolley Wire", 1935
Carbon typed copy of a technical procedure - 4 pages -"Graphical Location of Trolley Wire" giving the guide on how to locate trolley wire on curves and junctions, gives formulas, positioning at frogs, notes regarding various cars and trolley wire height. Consists of four pages with a blue print drawing. Each page has been scanned the blue print drawing reversed imaged as well. 4768.2 - the blue print drawing. Extracted from "Transit" Journal - April 1934. Dated 10th Jan. 1935 BTPS Number "226". "226" in ink on left hand bottom of first pagetrams, tramways, overhead, trolley wire, points -
Ballarat Tramway Museum
Manual - Procedure, State Electricity Commission of Victoria (SECV), "Rectified Protection", Mid 1930's
Carbon typed copy of a technical procedure - 3 pages "Rectifier Protection" gives details on cell failures, surge voltage protection, bridge circuits, over current and provides four figures to illustrate the paper. Written D.B. Corbyn and N. L. Potter in a paper to the Institute of Electrical Engineers London. Not dated. Assumed mid 1930's. BTPS Number "216". "216" in ink on left hand bottom of first pagetrams, tramways, electrical engineering -
Ballarat Tramway Museum
Manual - Procedure, State Electricity Commission of Victoria (SECV), "Extract from the 'Proceedings of the Electrical Association of New South Wales' session 1910 - 11", mid 1930's
Two copies of a Carbon typed copy of a technical procedure - 6 pages - "Extract from the 'Proceedings of the Electrical Association of New South Wales' session 1910 - 11" - giving advice on the location of Trolley Wire" giving the guide on how to locate trolley wire on curves and junctions, gives formulas, positioning at frogs, notes regarding various cars and trolley wire height includes notes on cross falls of track, a table of aluminium copper alloys - bending strength and failure modes. Consists of five pages with two blue print drawing. Each page has been scanned the blue print drawings reversed imaged as well. 4768.2 - blue print drawing showing references in the various formulas etc used. 4768.3 - ditto showing tracking for four wheeled and bogie cars and other diagrams for turnouts, frog locations and frog angles. BTPS Number "219". "226" in ink on left hand bottom of first pagetrams, tramways, overhead, trolley wire, points -
Ballarat Tramway Museum
Photograph - Digital image, WTP, Sturt and Lydiard St from a postcard, c1907
Taken from the Post office building looking towards the National Mutual Life building, and the Town Hall. Has numerous horse-drawn vehicles in the image along with an ESCo tram. Received from David Critchley of Sydney Tramway Museum in an email dated 6/5/2010. See the folder for a print of the email and a copy of the image. Notes that it is from a WTP Postcard, hand-dated 14/3/1908 along the bottom edge. See the Email dated 15/3/2010 regarding the use of this image. See 8988 for the postcard.Yields information about the corner of Sturt and Lydiard St in 1907c, from a digital image copy of a post card.Digital image of the corner of Sturt and Lydiard St from a postcard, 1908. trams, tramways, sturt st, lydiard st, esco -
Ballarat Tramway Museum
Ephemera - Ticket/s, Ballarat Tramway Preservation Society (BTPS), "All Day Ticket" for the "Ballarat Tourist Tramway", 1975
Has a strong association with the day of the official opening of the Ballarat Tourist Tramway in 1975 and with Graeme Breydon.Yellow index board - printed as an "All Day Ticket" for the "Ballarat Tourist Tramway" - issued by the BTPS with space for the date to be written in and signature of the conductor who issued the ticket. Produced at the start of operations for the BTPS Dec. 1974 or Jan. 1975. Used until 31/10/1975 when next series of all day tickets introduced. Ticket used by Graeme Breydon, issued by A. Cook on 1/2/1975, the official day of opening of the Ballarat Tourist Tramway by the BTPS. Hand numbered "9" in the right hand edge. See Reg Item 2308 for unused samples.trams, tramways, btps, all day tickets, tickets -
Ballarat Tramway Museum
Ephemera - Ticket/s, Ballarat Tramway Preservation Society (BTPS), official opening the Ballarat Tourist Tramway, 1975
Has a strong association with the day of the official opening of the Ballarat Tourist Tramway in 1975 and with Graeme Breydon.Set of three paper tickets issued on the day of the official opening the Ballarat Tourist Tramway - 1/2/1975 and over stamped as such. .1 - 5c - Ticket No. A004407 - See Reg Item No. 2100 .2 - 10c - A010012 - - see Reg Item 1720 .3 - 20c - A005001 - see Reg item 1785 For the stamp used See Reg Item 352. Collected by Graeme Breydon at the time of the opening - see History of Object.trams, tramways, btps, opening day, tickets -
Ballarat Tramway Museum
Ephemera - Ticket/s, Victorian Railways, ARHS tour to Farewell Bendigo, 1972
Has a strong association with the tours to mark the closure of the Bendigo Tramway system and Graeme Breydon.Edmondson pasteboard railway ticket, No. 0085, dated 12 Feb. 1972, for use on an ARHS tour to Farewell Bendigo prior to the closure of the system. Ticket base is pink with a thick purple stripe, which is printed in landscape format. Ticket number in reverse. Adult - Economy, available on the day of travel only and on the special train. On the rear of the ticket is the reserved seat and carriage number. Ticket used by Graeme Breydon on the day of the tour. See History of the Object for further details. Two copies held. trams, tramways, arhs, tmsv, tickets, closure -
Ballarat Tramway Museum
Book, Branford Electric Railway, "Basic Streetcar Operation - Instructions for K control, straight air and Safety Car", mid 1970's
Twenty four page photocopied pages contained within blue covers, side stapled titled ""Basic Streetcar Operation - Instructions for K control, straight air and Safety Car". Published by the Branford Electric Railway (Pennsylvania USA) for training their crews, mid 1970's.trams, tramways, instructions, training, braking, controllers, birney -
Ballarat Tramway Museum
Book, Branford Electric Railway, "The Environment of the Traction Era", 1976
Twenty page photocopied pages contained within pink covers, side stapled titled "The Environment of the Traction Era". Published by the Branford Electric Railway (Pennsylvania USA) for information and training their crews, mid 1970's. Subtitled - A brief study of the Electric Traction Industry in its American Setting, written by Raymond F Crapo, for the Branford Electric Railway Association, 1976. Contains study on the factors contributing to Traction's Success, its contribution, conclusion and bibliography.trams, tramways, instructions, training, street cars, usa, electric traction -
Ballarat Tramway Museum
Book, Branford Electric Railway, "The Branford Electric Railway Timetable No. 9", 1977
Forty page booklet individual pages pinned within grey covers titled "The Branford Electric Railway Timetable No. 9", dated 1/3/1977, authorised by D. K. Bowers Superintendent of Transportation. Gives Emergency Information, contact numbers, definitions, rules, timetables, special instructions and a map of the rail line. .Published by the Branford Electric Railway (Pennsylvania USA) for information and training their crews, mid 1970'strams, tramways, instructions, training, street cars, rules -
Ballarat Tramway Museum
Document - Handwritten Notes, State Electricity Commission of Victoria (SECV), “Painting of White Lines on Loops”, 1/03/1955 12:00:00 AM
Yields information about the painting of while lines at crossing lines to indicate clearances between tram lines.Carbon copy of a Hand written memo on SEC memo paper from D/E dated 1/3/1955, titled "Painting of White Lines on Loops”. signed by Les Denmead. BTPS Number "223" Has “223” in biro in bottom right hand and top right hand corners.trams, tramways, sec, crossing loop -
Ballarat Tramway Museum
Newspaper, The Courier Ballarat, “Move to Check Corrosion”, 26/03/1958 12:00:00 AM
Yields information about the relationship between trams and steel pipe which can result in corrosion - and the fitting of test points in Ballarat during 1958.Newspaper clipping titled “Move to Check Corrosion” from The Courier, dated 26/3/1958 about the fitting of test points to gas mains at the corner of Ligar and Seymour Sts the previous day. Quotes the Manager of the Ballarat Gas Company, work being done by Gas and Fuel Corporation. Has a photo of Mr J. Nicholls and R. Schafer. BTPS Number "222" Has “222” in biro in bottom right hand corner and “26.3.58” in blue pencil in top left hand corner.sec, gas works, electrolysis -
Ballarat Tramway Museum
document - Typed Notes, The Courier Ballarat, “Maximum Permissible currents for 6kV and 415V – armoured cables laid direct in ground, 27/01/1942 12:00:00 AM
Yields information about power supply in cables in Ballarat and heating effects.Carbon copy of a typed note or chart giving information about the “Maximum Permissible currents for 6kV and 415V – armoured cables laid direct in ground. Dated 21/7/1942, with initials W.M in top left hand corner. BTPS Number "220" Has “220” in biro in bottom right hand corner and “T/1” in red pencil in top left hand corner.secv, cables, power supply, electricity supply -
Ballarat Tramway Museum
Book, Nachod and United States Signal Co, "Nachod Signals", c1918
Sixteen page book with brown paper covers in addition. Pages printed on art paper with a red overprint on some pages. Titled "Nachod Signals", published by the Nachod and United States Signal Co. Inc, successors to Nachod Signal Co of Louisville Kentucky. Has a list of dates on page 2, of patents, the last being 5/2/1918. Has on the bottom of most pages "Nachod Spells Safety" Details the Nachod signals system, type CD with the details of the operation, elements of the system, signal layout, installation and wiring, trolley Contactors, signal aspects, relays, assembly on poles, ordering information, fuses, special designs and modifications, information in ordering, quantity and list of material, and specification details of the Type P on the last three pages. See also Reg Item 3318 for another US company system, received by ESCo at the same time. Indicates that the Nachod and US Signal Company had merged.On top of page 1 "Ballarat Tramway Preservation Society Catalogue No. 3" in black ink and overstamped ESCO's date stamp of 4 Nov. 1926. On page 2 at bottom :"Nachod and United States Signal Co. Inc successors to" has been overstamped. trams, tramways, signals, railways, tramways -
Ballarat Tramway Museum
Drawing, State Electricity Commission of Victoria (SECV), "Geelong – 7 1/2o left hand frog", 1943
Used in tramway power supply overhead.Yields information about the details of a the point frog used in the overhead in Geelong. Similar equipment used in Ballarat and Bendigo.Blueprint of SEC drawing No. GE-T6-7380 "Geelong – 7 1/2o left-hand frog", dated 31/1/1943. Details of a the point frog used in the overhead in Geelong. Similar equipment used in Ballarat and Bendigo.Has “107” in biro in top right hand corner. Has "Recorded in Drawing" office stamp on rear.overhead, trolley wire, equipment -
Ballarat Tramway Museum
Sign, State Electricity Commission of Victoria (SECV), "Motormen"
Has a strong association with the SEC Wendouree Parade depot, indicating which parts of the building were the area for Motormen (crews).Wood sign, lettered, 'MOTORMEN", white background, black letters with countersunk mounting holes in edges off centre. Rear of sign timber and dark green - SEC green colour paint.trams, tramways, ballarat, secv, motormen, crews, depot -
Ballarat Tramway Museum
Functional Object - Section Staff, Electric Supply Co. of Vic (ESCo), "Victoria Park Loop / Carlton St Loop"
Demonstrates aspects of Safeworking on the Ballarat Tramway system from 1960 to c1936 when replaced by electric signs. Yields Information about the operation of Ballarat's trams and safeworking procedures.Cast brass item with a flat part recessed section with the words "BALLARAT TRAMWAYS SECTION STAFF" cast into the surface and a flat section underneath, flush with the outside edges in which the words "VICTORIA PARK LOOP / CARLTON ST LOOP" stamped in. Has an open rounded end which forms a handle or a point where it could be hung on a peg. The top line of words has a reddish paint inlay. Used as a means of authorising a tramcar to have sole use of the track between the named points to avoid head on collisions. Safeworking object - known as a section staff. Not known when made, but in use until the introduction of the electric signalling in the mid 1930's by the SEC. See also Reg Items 934 and 988 for details of use and other examples are at 1851, to 53, 2473 and 4444 to 4448 and Reg item 934 and 988 for articles on the safeworking systems.trams, tramways, staff, safeworking, tramway staffs, sec, signals -
Ballarat Tramway Museum
Functional Object - Section Staff, Electric Supply Co. of Vic (ESCo), "Car Shed Loop / Macarthur St Loop"
Demonstrates aspects of Safeworking on the Ballarat Tramway system from 1960 to c1936 when replaced by electric signs. Yields Information about the operation of Ballarat's trams and safeworking procedures.Cast brass item with a flat part recessed section with the words "BALLARAT TRAMWAYS SECTION STAFF" cast into the surface and a flat section underneath, flush with the outside edges in which the words "CAR SHED LOOP / MACARTHUR ST LOOP" stamped in. Has an open rounded end which forms a handle or a point where it could be hung on a peg. The stamped area appears to have been polished compared to the others. Used as a means of authorising a tramcar to have sole use of the track between the named points to avoid head on collisions. Safeworking object - known as a section staff. Not known when made, but in use until the introduction of the electric signalling in the mid 1930's by the SEC. See also Reg Items 934 and 988 for details of use and other examples are at 1851, to 53, 2473 and 4444 to 4448, 4496 and Reg item 934 and 988 for articles on the safeworking systems.trams, tramways, staff, safeworking, tramway staffs, sec, signals -
Ballarat Tramway Museum
Sign, "Weather Blinds must not be operated by Passengers", 1960's
Enamel sign, black capital letters and lines on white background, with words in capital letters "Weather Blinds must not be operated by Passengers". Sign has a black enamel backing, with marks from the enamelling process and two holes centrally at either end. Two copies held.trams, tramways, signs, sec -
Ballarat Tramway Museum
Document - Folder with papers, State Electricity Commission of Victoria (SECV), 1960's
Yields information about the drawings that were used by the depot or workshop staff as reference drawings. Has a strong association with the depot workshop staff. Yields information about equipment on Ballarat tramcars and Signalling.Folder containing 46 blueprints or Dyeline prints of SEC tram equipment drawings. Front of folder made from a cloth back sheet of paper extended to secure to a thick cardboard runner. Rear of folder made from an old tram advertising panel or cardboard sheet, cut to size and secured to a thick cardboard runner with a cloth backing on both sides. Sheets secured with three brass screwed clips. Front cover damaged in bottom right hand corner. Rear cover breaking apart on outside around cloth binding. Heavy dirt marks from “grease” on bottom half of rear cover. Contains 46 drawings which have been individually catalogued and numbered on the rear of each drawing within the folder. Some of the drawings have been folded. Reg Item Micro Film No. Old BTPS No. SEC Drawing No Title 4807 42/4 1 VB4/8103C Westinghouse T1F Controller Main Cylinder Segments. 4867 47/2 2 BA-T8-8128 Westinghouse 225N Motor Case Bolt 4830 22/3 B 3 BA-T7-7666 Half Ball Brake Hanger Link, Driving Wheel, Brill Maximum Traction Truck 22E 4868 44/3A 4 BA-T8-8113 Split Suspension Bearing for Type W225 Motor (Westinghouse) 4869 52/2 5 BA-T8-8158 Contact Tips for G.E. Compressor Controller 4818 52/3 6 BA-T8-8159 GE B-23 Contact Finger Tips for G.E. Type ‘B’ Main Cylinder 4870 6/1 7A BA-T3-6734 Brass Nut for Switch Mechanism 4829 6/2 7B BA-T3-6735 Tongue Clip Link for Switch Mechanism 4871 6/3 7C BA-T3-6736 Fulcrum for Switch Mechanism 4872 6/4 7D BA-T3-6737 Plunger for Switch Mechanism 4832 7/6 8 BA-T3-6754 Pivot for Switch Mechanism No numbers 9 or 10 4873 17/5 11 BA-T7-7639 Detail of Motor Pinion for Brill Cars 4831.2 21/4 B 12 BA-T7-7661A Half Ball Hanger Links – single bogie trucks 4874 21/6 13A BA-T7-7663 Axle Box Inner Spring Driving Wheels Maximum Traction Truck 22E 4875 22/1 13B BA-T7-7664 Axle Box Outer Spring Driving Wheels Maximum Traction Truck 22E 4876 22/2 14 BA-T7-7665 Body Spring Brill Maximum Traction Truck 22E 4830.2 22/3B 15 BA-T7-7666A Half Ball Brake Hanger Link Driving Wheel Brill Maximum Traction Truck 22E 4877 22/4 16 BA-T7-7667 Body Spring, Brush Maximum Traction Truck 22E 4820.2 22/6 A 17 BA-T7-7669 Wear cups for Half Ball Brake Hanger Links, Single & Double Bogie Trucks 4878 50/5 18 BA-T8-8149 Connections of Line Breaker and Ratchet Switch for use with Drum Controller 4879 74/6 19 BA-T13-8757/9 Signal boxes, Back of Panel Wiring and External Connections 4880 45/1 20 BA-T8-8116 Trolley Harp 4806 15/3 21 BA-T7-7625 Equalizing Lever, Fulcrum, Brill 21 E truck 4881 15/5 22 BA-T7-7626A Brake Beam Fulcrum Brill 21E truck 4808 16/1 23 BA-T7-7628 Pinion Remover, GE 201G and GE 202 motors 4882 16/3 24 BA-T7-7630 Spring Posts, Brill 21E Truck 4883 21/3 25 BA-T7-7660 Brake Shoe Holder, Driving Wheel, Maximum Traction Truck Brill 22E 4884 21/5 26 BA-T7-7662 Brake Rod Guide, Single Bogie Trucks 4885 22/5 27 BA-T7-7668 Brake Shoe Holder, Pony Wheel, Maximum Traction Truck Brill 22E 4809 42/2 B 28 BA-T8-8101 Trolley Wheel and Axle 4815 42/1 B 29 BA-T8-8102A Motor Suspension Bearing, GE 202 Motor 4796.2 42/5 30 BA-T8-8104 Connection Diagram WH 225N Motor 4886 42/6 B 31 BA-T8-8105B Motor Suspension Bearing, GE 201 Motor 4797.2 48/6 32 BA-T8-8137 WH T1F Controllers 4816 49/2 33 BA-T8-8138 Connection Diagram GE 202 Motor 4887 49/3 34 BA-T8-8139 Connection Diagram K-36-J Controller 4888 50/3 35 BA-T8-8146 GE K-36-JR Controllers, with line breaker (Connection diagram) 4889 50/6 36 BA-T8-8150 Commutator for Westinghouse 225N Motor 4846 51/1 37 BA-T8-8151A Armature Bearing Lining, Commutator End, Type GE 201G Motor 4813 51/2 38 BA-T8-8152 Armature Winding Diagram Westinghouse 225 Motor 4840.2 51/40 39 BA-T8-8154A Armature Bearing Lining, Pinion End, Type GE201G Motor 4890 51/6 40 BA-T8-8156 Armature Bearing Lining, Pinion End, Type GE202A Motor 4891 52/1 41 BA-T8-8157A Armature Bearing Lining, Commutator End, Type GE202A Motor 4892 64/5 42A BA-T9-8392A Step Hangers, Single and Double Bogie Trucks, Hinged Type 4785.2 64/6B 42B BA-T9-8392/1A Step Hangers, Single and Maximum Traction Trucks, Fixed Type 4812.2 43/1 43 BA-T8-8106B GE K36J Controller, Main Cylinder Segments 4893 50/2 44 BA-T8-8145A GE B23E Controller, Main Cylinder Segments 4816 65/2 45 BA-T9-8394B Door Lock for Motorman’ Cabin Maximum Traction Trucks. 4810 73/3 46 BA-T13-8757 Ballarat Electric Tramways Signalling System, Arrangements & Details of Box.On front cover of folder, "1 - 46"trams, tramways, drawings, ballarat, sec, depot, workshops -
Ballarat Tramway Museum
Functional object - Conductors Bell, Melbourne and Metropolitan Tramways Board (MMTB), 1920's?
Demonstrates a conductors communication bell used in Ballarat trams - may have been made either for the SEC or the MMTB. Brass Conductor Communication Bell, consisting of frame, bell, striker, bell pull section, one nuts and two pins. Bell mechanism, note the bell itself covered in SEC Tramway Green paint on one side and the underside.tram, trams, conductors, bell, sec -
Ballarat Tramway Museum
Ephemera - Ticket/s, Ballarat Tramway Museum (BTM), BTM 1d, Dec. 2010
Demonstrates the Museums phasing out of tickets priced for the actual fare and conversion to a universal ticket that does not have to be changed for a fare increase and in this case, over stamped 5c tickets. Note: Was supposed to have been printed on off white paper and with an orange fare instead of red.Block of 100 tickets, 1d, Ballarat Vintage Tramway, A00001 to A000100. Printed on white paper, dark red ink with the "1D" and A prefix and ticket number in black ink. Issued commencing 1 January 2011, to replace the 5c over stamped check ticket. Stapled with a heavy staple at the top of the ticket onto a heavy brown cardboard sheet. On the rear is a note regarding the BTM and contact details. trams, tramways, tickets, btm -
Ballarat Tramway Museum
Map, Australian Survey Corps, "Victoria Ballan", 1933
Topographic map of the Ballan area - includes Bacchus Marsh and Bungaree, No. 837, Zone 7, Army Map, dated 1933, 1:63360. Shows rail lines, roads, elevations, contours. Collected with relevance to the Museum's association with the area, at Bungareetrams, tramways, bungaree, map