The letters of the completed banner were made by different churches within in the presbytery and spelled a sentence, presumably "BUILD YOUR CHURCH LORD!" Orbost was one of the churches that had the finished banner on display. On of 24 small banners with tabs at the top of each for hanging on a rod. 19 have large blue letters appliqued on them. Twenty two of the banners are roughly square and two are smaller and oblong. Three have no letters and are used as spacers in the four word sentence that the letters make. The banners are decorated with rural and coastal images. BN068.19 "D" with machine embroidered church "St Matthews Yinnar", hands "Friendship", building "UCA Yinnar", chuch "Holy Innocents YINNAR STH" "(Californian RED WOOD)", tree "BIG TREE grows at Christ Church Boolarra" " D " "St Matthews Yinnar" "Friendship" "UCA Yinnar" " Holy Innocents YINNAR STH" " Californian RED WOOD" " BIG TREE grows at Christ Church Boolarra"uniting church adult fellowship

Composite photograph from a journal showing five scenes of the equipment and operational facilities of the cable tram system - a power house, Nicholson St workshops paintshop, the iron shop and the wood shop. Includes an image of the grip mechanism.Yields information about the cable tram workshopsComposite photograph of cable tram maintenance facilities and grip mechanism.Melbourne 1 – Power House No. 3 2 – Paint shop – Nicholson St W/S 3 – Grip Mechanism 4 – Iron Shop – Nicholson St W/S 5 – Wood Shop – Nicholson St W/S Copy neg Mark Plummer collections ex late John Alfred collection. cable trams, melbourne, grip, workshops, nicholson st workshops, power house, engine house

20th C and probably earlier families could make this simple 'knitting machine' by using a piece of round, hollow wood and knocking 4 nails into one end of the cylinder leaving a protrusion of 2cm. An empty cotton reel was commonly used with left over knitting wool. Children were taught to wind the wool around the nails in loops, figure of 8 and other patterns so that a chain was made which gradually protruded through the base of the cylinder as a knitted chain. The chains could be made to any length and then sewn together to make a usable object eg face washer.Gladys Reed was a member of the Ormond Choral Society c 1950. who performed plays and musicals the City of Moorabbin and she was skilled in hand knitting, crochet and dressmakingGladys Reed was a member of the Ormond Choral Society c 1950. who performed plays and musicals in the City of Moorabbin and this Doll was made and used by her family.c1950A small piece of painted, carved wood with central hollow and 4 nails on top used for making/ knitting a woollen chain.Painted doll featuresknitting, clothing, haberdashery, crochet, doilies, brighton, moorabbin, pioneers, dressmaking, market gardeners, early settlers, craftwork , bentleigh, lacework, moorabbin shire, reed gladys, dairy farms, fruit orchards

Black dress of synthetic crepe fabric. Sleeveless bodice with darts at front from waist to bustline. Side panel inserts under arms to waist. Back has opening from neck to below waist with metal zipper(53cm). Peplum(8cm) at waist front and back. Decorative bows of black cord at waistline at each hip. Long tassels.Knee length skirt is knife pleated. Dress is unlined.Markings/Inscriptions Label attached to lower zipper. ''A59110 mf ex st sz'' Handwritten ''Sample'' ;Y127' '12'.costume, female, black synthetic crepe dress

People in ancient civilisations smoked pipes during various healing and religious ceremonies. By the end of the 15th century, after tobacco was discovered in America, smoking had become a common pastime for everyday people. From that time, tobacco pipes were fashioned from many materials ranging from gold and silver to corn cobs and clay. A popular material was meerschaum, an expensive, soft, white stone from Turkey. In the 1820s, French craftsmen carved pipes out of the wood from the growth on the root of a Mediterranean White Heath. This material became increasingly popular due to its durable, heat-resistant qualities. The growth was called ‘bruyere’, now anglicised to ‘briar’ wood. Bakelite was the first plastic made from synthetic components. It was developed by Leo Baekeland of New York in 1907. The material was heat-resistant and could be moulded into any shape and hardened to keep its shape. This invention greatly impacted the industrial world and the products available to the domestic market, making more objects available at reduced cost.This smoker's tobacco pipe symbolises one of the leisure activities of the early 20th century that has continued into modern times. The shape and materials of the pipe represent a point in time in the evolution of tobacco pipes, including the revolutionary impact that the 1900s invention of Bakelite had on objects available in the domestic and industrial markets.Smoker's tobacco pipe; a round brown wooden pipe bowl joined to a dark brown mouthpiece. The French pipe's bowl is made from briar wood, and its mouthpiece is Bakelite. There is an inscription on the pipe."French Briar Pipe"warrnambool, shipwreck coast, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, smoker's pipe, tobacco pipe, briar wood pipe, wooden pipe, smoking, french pipe, bakelite, smoker's equipment

WILLIAM THOMAS SHUFFLEBOTHAM No 2544 enlisted in 5th reinforcements 58th Batt on 11.6.1916 age 32 years. Embarked for England 25.9.1916. Embarked for France 2.1.1917, hospitalised 22.2.1917 with Gastro Enteritis, embarks for France 30.8.1917, listed WIA and missing 25.9.1917 Polygon Wood. Classed KIA by a Court of inquiry in the Field 25.9.1917.Tan wooden frame with carving, glass front, cardboard backing & hanging cord. Sepia photo of soldier in uniform, jacket, trousers, puttees, boots & peaked cap. Flag draped in background.On front: “WILLIAM THOMAS SHUFFLEBOTHAM, No 2544, 5th REO's 58th Batt AIF, Enlisted 11.06.1916, Report KIA 25.09.1917 at Polygon Wood” On back in black biro: “WILLIAM THOMAS SHUFFLEBOTHAM” info. Sticker on back: Lennox Gallery Pty Ltd, C/N 49592photography-photographs, frame accessories, military history-army, shufflebotham

This swagger stick belonged to Private Ernest LUCAS who served with the Royal Defence Corps between 17/6/1907 and 18/5/1919 including the 6th Battalion Middlesex Regiment In the British Army before World War I, swagger sticks were carried by all other ranks when off duty as part of their walking out uniform. The stick took the form of a short cane of polished wood, with an ornamented metal head of regimental pattern. The usual custom was for the private soldier or NCO to carry the stick tucked under his arm. Until 1939 swagger sticks were still carried by peacetime regular soldiers when "walking out" of barracks but the practice ceased with the outbreak of World War II. The 6th Battalion Middlesex Regiment can trace its history back to 7 August 1760 as part of the Middlesex Militia. In 1778 it was titled the 1st East Middlesex Militia. By royal order the regiment was later designated the Royal East Middlesex Militia on 24 April 1804. By 1855 it was using the formal title of "1st or Royal East Middlesex Regiment of Militia". In 1900 the number of regular Middlesex Regiment battalions was doubled with the formation of a new the 3rd and 4th battalions; and the two militia battalions were renumbered as 5th and 6th battalions of the regiment. The unit's standing orders of 1863 record the regimental insignia as being somewhat unusual, in that it did not include standard royal crown, but featured a five-pointed Saxon Crown atop a shield with the arms of the East Saxon Kingdom i.e. three stylised Seaxes hilted and pommeledpLong narrow round cane made from polished reddish/brown wood with brass metal tip and embossed silver topSilver metal top embossed with a crown above a shield inscribed 6th Battalion Middlesex Regtswagger stick, 6th battalion middlesex regiment, private ernest lucas

The sample of steel from which the S.S. Julia Percy’s boiler was made has been tested, according to the attached label. The test involved heating the steel to blood red temperature (or dark red colour) then dipping it into water and bending it when it was cold. A “very severe test for quality” was written on the ticket by T.H. Osborne. (Mr Thomas Hamilton Osborne was the secretary for the Western Steam Navigation Co, established in Warrnambool in 1886. The company’s office was on the corner of Timor and Liebig Streets in Warrnambool and its north-western wall is now part of the current Warrnambool Regional Art Gallery. ) Cold bending of steel in a press or through rollers is the typical method of curving steel for construction. The steel needs to be manufactured in such a way that it is strong enough yet still flexible enough not to crack when bent or rolled. The boiler on the Julia Percy could have been a Scotch Boiler, a design introduced in the 1870’s and still being used today. This design was more robust that previous boilers, generating higher working steam pressures. The design incorporate greater ability to roll iron plates, leading to greater strength, thicker plating and fewer riveted joints. They were originally made of iron then later incorporated steel sections until they were entirely constructed of steel. Many examples of this type of boiler can be found on wreck sites. Shipping was the cheapest and most practical means of carrying produce and goods during the period 1840-1890. Regular domestic steamer services commenced in the Warrnambool district in the late 1850’s and by 1870 the passenger trade was booming. Produce was loaded from the jetty into ‘lighters’ (small boats), which took it to the ships at anchorage in the bay. Passengers were taken to the ship’s side then climbed aboard up ladders or gangways. The coming of the railway in October 1889 meant the gradual decline and end of the steam shipping era. Originally the ship was known as the SS Julia Percy and was later renamed as the Leeuwin. She was an iron passenger-cargo steam ship built in Glasgow by Thomas Wingate for the Warrnambool Steam Packet Company, which commissioned the ship for the steamship trade in Victoria’s western district. She was first registered in Warrnambool, Victoria in 1876. At one point in time the Julia Percy would sail from Warrnambool to Melbourne every Friday and return from Melbourne to Warrnambool every Tuesday. The cost of a return ticket for a Saloon Fare was £1.0.0. She would sail “if practical and weather permitting”. The Julia Percy changed hands several times. Her next owner was the Western Steam Navigaiton Co of Melbourne (1887). It was the manager of this company, Mr. T.H. Osborne, who tagged ths steel sample above. Melbourne Steamship Co became the next owners (1890), followed by William Howard Smith and Sons (1901) for use in Queensland coastal trades, then she was bought by George Turnbull in 1903 and used for local mail contract in Western Australia. She was sold to the Melbourne Steamship Company Ltd. (1906) and re-named the Leeuwi but continued in her Western Australian coastal run. She was converted into a coal hulk in Melbourne in 1910 as a result of damaged caused when she was driven against the jetty at Dongara during a gale. The ship was eventually dismantled and scuttled in Bass Strait on 28 December 1934. The steel sample is significant for its association with the wreck of the Leeuwin (Julia Percy), which is on the Victorian Heritage Register. It is historically significant for being a rare artefact that has potential to interpret aspects of western Victoria’s 19th century steamship trade and Victorian cultural history, including the testing and manufacturing process associated with steam power. Leeuwin is listed on the Victorian heritage Register as being historically significant ‘as one of only four wrecks of steamships in Victorian waters associated with the western district of Victoria’s coastal steamship trade. Her registered number is VHR S413. A sample of the steel from which the boiler of the "SS Julia Percy" (later named Leeuwin) was made. The piece of steel is a ‘C’ shape with the ends almost meeting. A luggage ticket is tied onto the steel and has an inscription on it. The steel is rusty.Ticket with typed information “Steel of which the Boiler of the “Julia Percy” (Warrnambool Steam Navigation Co) was made. TEST: Made Blood hot or Dark Red then dipped into water and bent cold. A very severe test for quality T.H. Osborne. Below these words is the hand written inscription in black “FM 151 / 9.75” julia percy, leeuwin, steel, boiler, steam ship, metal testing, western steam navigation co., flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, t.h. osborne

Zilles Printers was begun by Lewis Zilles in the early 1930s. It was in McKenzie Street Ballarat. His son Jeffrey also became a printer - letterpress, offset and screen printer. The business became Zilles Printers/Graphics and was in Armstrong Street and later Bell Street Ballarat. Henry Hames Pty Ltd is a well known paint company in Ballarat, bendigo, Geelong, Melbourne and Adelaide.Folded card showing selection of colours for Haymes Enamelex (paints). Forty options. Hammertoe section are sample glued to card. haymes, colour card, paint, ballarat, bendigo, geelong, melbourne, adelaide

Purchased by a Society member and donated.Round wooden block with sample of material to demonstrate how to use the darner and needles. Instructions included - see Supp EnvelopeThe Ebor Darnerdomestic items, sewing

Frederick Napoli Prescott was a prominent Bendigo Optician and Jeweller. He was born and educated in Hobart before joining his father's jewellery and optical business. After studying in Europe to gain further qualifications he returned to Australia and opened a business at the corner of Mitchell and Hargreaves Street Bendigo. He was later in partnership with Mr C.M. Dawe trading as Prescott & Dawe. Jeweller's sample card with fourteen images of chain patterns. Each pattern is numbered with options for 9 ct. or 15 ct.jeweller's designs, chain patterns

Brown ceramic plate with black and white decorations. On reverse is painted 'Australian Open 2006' and 'Sample 1'. Materials: Ceramictennis

Folded card brochure with printed blue text on the back and front. Fabric samples attached with hand written text on the inside.front: [printed] ALBANY / FASHION SUITINGSsamples, fabric, brochure, albany woollen mills, school uniforms

Folded card brochure with printed blue text on the back and front. Fabric samples attached with hand written text on the inside.front: [printed] ALBANY / FASHION SUITINGSsamples, fabric, brochure, albany woollen mills, school uniforms

Folded card brochure with printed blue text on the back and front. Fabric samples attached with hand written text on the inside.front: [printed] ALBANY / FASHION SUITINGSsamples, fabric, brochure, albany woollen mills, school uniforms

Card with fabric samples affixed with staples. Card has some hand written text and two holes punched in spine.front: [handwritten] Albion Mills Geelong / 627 20/4samples, fabric, brochure, school uniforms, albion woollen mills co. pty ltd

Earliest research samples from David Orme Masson's work at Edinburgh.Trimethyl sulphine dichloride, crystallised rom cold alcohol.

Cloth sample book: "City & Guilds Exams 1914-1915 Patterns" has 35 grey and black cloth samples (1 space is blank). Pages entitled: "Range 1 & 2 Tropical Suitings" (5 samples); "Ranges 3 & 4 Suitings" (6 samples); "Range 5 Suitings" (3 samples)/ "Range 6 Vestings" (3 samples); "Range 7 & 8 Vestings" (7 samples); "Ranges 9 & 10 Trouserings" (5 samples); "Ranges 11 & 12 Trouserings" (6 samples);City & Guilds Exams 1914-1915 Patterns (ink)weaving textile industry textile design textile industry - education, weaving, textile industry, textile design, textile industry - education

The Australasian Wood Duck is commonly described as 'goose-like' in appearance. They reside throughout Australia and Tasmania in regions including grasslands, open woodlands, wetlands, flooded pastures and along the coast and bays. Unlike some breeds of ducks, this species can walk on land with ease and can often be seen perched on logs and in trees. The Wood Duck eat grass, clover and other herbs. On occasion they eat insects. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum in Sydney and the National Museum of Victoria (known as Museums Victoria since 1983), as well as individuals such as amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century.This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century.The female Wood Duck has a pale brown head with dark glass eyes. The head is looking backwards over left shoulder. The bill is a dull grey colour and the legs are a similar grey.The breast is speckled cream-grey with a white lower belly and under-tail. There is a paper tag tied to the upper part of the Wood Duck's right leg, a white label attached to the front right of the wooden platform and a grey label on the left beside the white label.....[missing] Goose / ....[missing] page 38. / 133 /taxidermy mount, taxidermy, animalia, burke museum, beechworth, australian museum, skin, reynell eveleigh johns, bird, australian birds, australaisian shovelor, shovelor, wood duck, australian wood duck, female duck, maned duck, female

[E.J. Semmens experimented with Eucalyptus distilling during his time as principal of the VSF, this piece of equipment would have been used for teaching and research at the School and maybe linked to Semmens' research.] Detailed description of item supplied by from the International Wood Collectors Society.Steam distillation box for extraction of essential oils from wood or sawdust and leaves. Copper box and stand, bakelite fittings, cork and glass tubing. The box has a vent for releasing steam pressure and bottom drain hole to collect oils. It is raised to allow a burner to fit underneath it. forestry, forest products, semmens, edwin james

A saw is a tool consisting of a tough blade, wire, or chain with a hard-toothed edge. It is used to cut through material, very often wood, though sometimes metal or stone. The cut is made by placing the toothed edge against the material and moving it forcefully forth and less vigorously back or continuously forward. This force may be applied by hand, or powered by steam, water, electricity or other power sources. An abrasive saw has a powered circular blade designed to cut through metal or ceramic. In ancient Egypt, open (unframed) saws made of copper are documented as early as the Early Dynastic Period, circa 3,100–2,686 BC. Many copper saws were found in tombs dating to the 31st century BC. Models of saws have been found in many contexts throughout Egyptian history. As the saw developed, teeth were raked to cut only on the pull stroke and set with the teeth projecting only on one side, rather than in the modern fashion with an alternating set. Saws were also made of bronze and later iron. In the Iron Age, frame saws were developed holding the thin blades in tension. The earliest known sawmill is the Roman Hierapolis sawmill from the third century AD used for cutting stone. The subject item at this time cannot be associated with an historical event, person or place, provenance is unknown, as the maker is unknown but the pattern or design and type of wood used indicate it is a tool of modern manufacture around the mid to late 20th century.Wood hand saw with wooden handle attached to saw by 4 rivets. No blade markings Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, handsaw, wood saw, carpenders tools, cabinet makers tools, wood cutting

Small portrait of a man seated on a chair. He is wearing a three piece suit and a bow tie. He also has a beard.David Wood, Corner of Bank & Clarendon Streets, Emerald Hill, Melbournephotograph, portrait, male, portrait of a man, david wood

Spalding wood racquet with red and white whipping on shoulders and grooved wood handle. Leather cuff on butt. Materials: Wood, String, Gut, Leathertennis

See Item 11000.189Hanro Sample Room Photo: Tall Room with 3 banks of Studio type lighting. At the back is a glass door. The walls are painted wood panelling to the door line in front of that is the reception desk with a curved desk that has a vase of glowers. A filing cabinet is to the right with cupboards to the back. A black phone sits on the desk. To the right of the room is a display of knitwear in wood style cabinetry with a change room and Hanro underwear display. To the left you can see part of the rack display. At the bottom of the photo at either side is some sticky tape Box 116Aphotograph, building, hanro, hanro

Pleated ruffles were a fashionable trimming for ladies’ clothing in the late 19th century - early 20th century. Dressmakers and classy laundries offering “fancy” ironing services both had plenty of use for a pleating machine. Pleating machines were sold for home use too.This item is an example of a machine not commonly used today.Metal and wood pleating machine, still in working order. Handles are carved wood.textile-machinery sewing pleating-machine

A ply-wood paddle, with rounded butt. Materials: Wood, Metal, Glue, Lacquertennis

A ply-wood paddle, with squared butt. Materials: Wood, Metal, Glue, Lacquertennis