Showing 2465 items
matching australia badges
-
Frankston RSL Sub Branch
Hat, Felt WW2, 1942 (exact)
A 1942 felt fur slouch hat, no binding edge, press stud, 7 fold puggaree with T shaped clour patch, rising sun badge, broken chin strapN 35, SIZE 7, 1942 on inside hat band; Australian Commonwealth Military Force on badgerising sun badge, slouch hat, 7 fold puggaree with, t, shaped, colour, patch, broken chin strap -
Frankston RSL Sub Branch
Helmet, Australian M1, circa 1960's
Standard issue United States M1 pattern steel helmet, olive drab in colou, stretch cotton cargo type net, with fibreglass liner. On the inside of a strap in the liner '8415-153-6671' is printed in black ink. This number would appear to be the "Federal Stock Number (FSN)" which was used 1949 to 1975 when ti was replaced by "National Stock Number (NSN)' by additional of 00 after the first 4 numbers. this would indicate that it was made in USA. The chin strap and liner are both complete and fully operable. These helmets were first issued in 1941 to the United States Armed Forces. They were adopted after the Korean War by the Australian Defence Force. In the 1990s they were replaced by the Kevlar based Personnel Armour System-Ground Troop (PASGT) type helmet. However, as evidenced by this helmet, some M1 Steel helmets were not replaced in-service by the PASGT helmet and survived into the early 21st Century. Used by Royal Australian Army in Vietnam in areas where mines were significnat, such as Long Hai's mountains (together with US flak jackets), and also by Royal Australain Navy.An example of an Australian Army issue M1 steel battle helmet complete with fibreglass liner. This helmet type was issued to Australian defence personnel during the Vietnam conflict. The inner line has a transfer on the front " Australian Military Forces" with rising sun badge. The steel outer has an olive green elastic cover (similiar to cargo net) to hold camouflage material. The M1 is two "one-size-fits-all" helmets: an outer shell made of metal and a hard hat-type liner that is nestled inside the shell and contains the suspension system that would be adjusted to fit the wearer's head. Helmet covers and netting would be applied by covering the steel shell with the extra material tucked inside the shell and secured by inserting the liner. The helmet is 7 inches in height, width is 9.5 inches and length is 11 inches. The weight of a World War II era M1 is approximately 2.85 pounds including the liner and chinstrap. (From Wikipepedia) the inner line has a transfer on the front " Australian Military Forces" with rising sun badge.steel helmet -
Frankston RSL Sub Branch
Badge
... Pressed metal cap badge for the Royal Australian Army... mornington-peninsula Pressed metal cap badge for the Royal Australian ...Pressed metal cap badge for the Royal Australian Army Service Corp. This badge is brass alloy with two pins at rear for securing to the cap when worn. -
Frankston RSL Sub Branch
Cap, Forage
A standard issue RAAF blue Other Ranks' woollen forage cap with oxidised brass RAAF badge on left hand side. The two buttons at the front are made of black plastic. The cap is lined with black cotton fabric. The crown opening has been sewn up with large black running stitches in heavy black thread. A rectangular shaped white cotton maker's label that bears various markings indicating size, year of manufacture, etc. is sewn inside the left hand side of the cap. A label attached inside the cap has the following: "V 330, 1944, MADE IN AUSTRALIA, SIZE 7" and the D^D marking with the letters "A F". The cap is also marked with the name "FRASER" and the service number "RAAF A36508"raaf, air force, australia, world war 2, ww2, airmen, aircrew, kings crown badge, -
Frankston RSL Sub Branch
Cap, RAAF Peaked
... mornington-peninsula raaf air force australia kings crown badge ...A standard issue Royal Australian Air Force dark blue peaked cap with woven black hat band and patent leather black chin strap secured by gilded buttons with RAAF insignia. A cast economy issue gilded metal Other Rank's RAAF badge is attached to the front of the hat band and a summer issue khaki cotton cap cover is fitted over the crown. The sweatband is made of brown leather and the inside of the cap is lined with blue corded silk with a clear plastic protective cover. A rectangular white manufacturers label is attached to the lining bearing details including size, etc. The serviceman has written his name and service number on the inside of the leather sweatband.The manufacturers label is marked: "M.TX, SIZE 67/8, A^F, MADE IN AUSTRALIA" The serviceman has written his name on the inside of the leather sweatband, K. I. Fraser, service number A36508.raaf, air force, australia, kings crown badge, -
Frankston RSL Sub Branch
Cap, RAAF Peaked
... mornington-peninsula raaf air force australia queens crown badge ...A standard issue Royal Australian Air Force dark blue peaked cap with woven black hat band and patent leather black chin strap secured by gilded buttons with RAAF insignia. A cast economy issue gilded metal Other Rank's RAAF badge is attached to the front of the hat band. The sweatband is made of brown leather and the inside of the cap is lined with blue corded silk with a clear plastic protective cover. A rectangular white manufacturers label is attached to the lining bearing details including size, etc. The serviceman has written his name and service number on the leather sweatband. The manufacturers label is marked: "M.TX, SIZE 67/8, A^F, MADE IN AUSTRALIA" The serviceman has written his name on the leather sweatband, K. I. Fraser, service number A36508. raaf, air force, australia, queens crown badge, -
Frankston RSL Sub Branch
Cap, RAAF Peaked
A standard issue Royal Australian Air Force mid blue peaked cap with woven black hat band and patent leather black chin strap secured by gilded buttons with RAAF insignia. A silvered metal Other Rank's RAAF badge is attached to the front of the hat band. The sweatband is made of brown leather and the inside of the cap is lined with blue silk like material with a clear plastic protective cover. The protective lining is stamped with manufacturers details including size, etc. The serviceman has written his name and service number on the inside of the leather sweatband. The manufacturers label stamp has the following: "MOUNTCASTLE PTY LTD, South Brisbane, QUEENSLAND, 1972, 7, ^" The serviceman has written his name on the inside of the leather sweatband, K. I. Fraser. raaf, air force, australia, early 1970s, queens crown badge, -
Frankston RSL Sub Branch
Collection, Badges
United States Army standard issue infantry heavyweight webbing waist belt as worn in World War 1. This is an example of a 'trophy' belt, complete with a souvenir collection of metal insignia, badges and buttons which are attached to the belt. The belt has brass fittings however the original buckle is missing. There are a total of 83 various allied military insignia, badges and uniform buttons from the World War 1 era, 56 metal insignia and badges and 27 metal buttons which are mostly of Australian, New Zealand, Canadian or British origin. Belt manufactured by M W & S Limited of England in 1915.The reverse side of the belt is stamped "M W & S LTD., 1915" and has an "L" stamp and the Defence Department "/|\". The belt reverse also has the following name in black handwriting "A Paxino 9781 2211". Note A Paxino was associated with Frankston RSL Sub Branch for many years. -
Frankston RSL Sub Branch
Hat, Felt RAN, 1991
The Slouch hat (also known as a Hat KFF, or Hat Khaki Fur Felt) is worn as the standard ceremonial headress for all members of the army, except those belonging to units or corps that have an official headress, e.g., some units wear a beret. As such, it is treated with the utmost care and respect. The Grade 1 Slouch hat is worn with a seven band puggaree, said to represent the six states and the territories of Australia.. This broad brimmed hat has a navy colored puggaree, and a plastic, circular badge for RAN comprinsing crown atop a 30mm diameter circle cotaining an anchor & rope.The hat (Hat KFF) has a brand marking on the internal leather brim; AKUBRA 1991 56 (nb size) Made in Australia The navy blue puggaree has a label on the inside; ABI vic 1992 8405-66-126-4453 The puggaree has a notation of the wearer; BAQUIREZA -
Frankston RSL Sub Branch
Hat, Felt RAAF, 1940
The Slouch hat (also known as a Hat KFF, or Hat Khaki Fur Felt) is worn as the standard ceremonial headress for all members of the army, except those belonging to units or corps that have an official headress, e.g., some units wear a beret. As such, it is treated with the utmost care and respect. The Grade 1 Slouch hat is worn with a seven band puggaree, said to represent the six states and the territories of Australia,. it has a RAAF badge. The chinstrap is broken. .On internal leather lining; JOHN BARDSLEY & SONS PTY LTD SIZE 6 7/8 1940 The puggaree has the name of; RAAF A3605O8 FRASER, K I -
Frankston RSL Sub Branch
Munition, Trench Art, Patronen Fabrik
Spent ammunition casing from a World War 1 German 155mm field gun (maybe Naval?). This casing was manufactured in February 1916. This is an example of trench art having had an Australian Army 'rising sun' hat badge attached to the outside surface of the case. -
Frankston RSL Sub Branch
Swagger Stick
Swagger StickSwagger stck, light tan in colour, with bulb on the head of the stick embossed with "Rising Sun" emblem, using third pattern from 1904 to 1949. The Third Pattern - May 1904 The Third Pattern Rising Sun Badge. The third pattern Rising Sun badge carried a scroll inscribed with the words ‘Australian Commonwealth Military Forces’ and was worn throughout both World Wars. There were, however, a number of variations of the badge; a special version was struck for the coronation of King Edward VII in 1902 and there were badges of the Commonwealth Horse and the Australian Instructional Corps, each with its respective title on the scrolls. This pattern badge formed the template for all subsequent General Service badges. The bulb on the head of the stick is "distressed" -
Frankston RSL Sub Branch
Badge, ARP
Australian issued ordnance factory Air Raid Precaution (ARP) enamelled metal identification badge. The badge has a red background with a gold colour inscription. The rear of the badge has a pin for attaching the badge to the wearer's clothes.The badge has the following inscription on the front side: "ORDNANCE ARP FACTORY", the rear side has the number "8" and is impressed with the manufacturers name "Stokes & Sons Melbourne" -
Frankston RSL Sub Branch
Souvenir, Trophy
A trophy in the form of a small replica of an Australian Army 'slouch hat' mounted on a circular stand. The 'slouch hat' is silver plated, has a turned brim on the left hand side and has a 'rising sun' hat badge. The circular stand is made of a light gauge steel which has been pressed in the form of an inverted dish and is coloured with a mid brown finish. There is a silver plated label attached to the dish which has been engraved indicating that this item was originally a trophy (origin unknown). The label has the following engraved inscription "R. Donowa Trophy, 1966, won by, G. Plant."The label attached to this trophy has the following engraved inscription "R. Donowa Trophy, 1966, won by, G. Plant." -
Frankston RSL Sub Branch
Souvenir, Tea Towels
Souvenir tea towels made for the 40th anniversary commemoration of the formation of the Australian Women's Army Service which was formed on the 13th August 1941. There are eight of these linen tea towels screen printed in colour on a plain background. There are blue, maroon and green examples. The tea towels feature the badge of the A.W.A.S. ASSOCIATION VIC. and the date of formation.The tea towels have the following screen printed in colour: The badge of the A.W.A.S. ASSOCIATION VIC. with "A.W.A.S." above and "AUSTRALIAN WOMEN'S ARMY SERVICE" around the lower part of the badge. Beneath that "13 AUGUST 1941" and the note "Hand printed in Australia"world war 2, ww2, women, women's, awas, a.w.a.s., australian, nurse, nursing, service, -
Frankston RSL Sub Branch
Souvenir, Tea Towels
... background. The tea towels feature the badge of the Australian... in colour: The 'rising sun' badge of the Australian Commonwealth... and "40th ANNIVERSARY" above the badge and "AUSTRALIAN WOMEN'S ARMY ...Souvenir tea towels made for the 40th anniversary commemoration of the formation of the Australian Women's Army Service which was formed on the 13th August 1941. These tea towels are linen and are screen printed in olive green on a plain background. The tea towels feature the badge of the Australian Commonwealth Military Forces. These tea towels have the following screen printed in colour: The 'rising sun' badge of the Australian Commonwealth Military Forces with "A.W.A.S." uppermost and "40th ANNIVERSARY" above the badge and "AUSTRALIAN WOMEN'S ARMY SERVICE" below the badge. Beneath that "1941 - 1981" and the note "PURE LINEN" world war 2, ww2, awas, a.w.a.s., nurses, service, womens, women's, army, australia, -
Frankston RSL Sub Branch
RAN Badge, Royal Australian Navy WW1 Female Relatives Badge
One of 2 types of badges issued to female relatives, this one being a round rather than an oval one. It is in good condition, no parts missing although it has not been cleaned or polished in some time. The badge has the Royal Crown at the top of a blue enamelled stirling silver circle . Underneath and attached to the circle is a blue enamelled horizontal stirling silver banner with 2 eyelets at either end of the banner. In the centre of the circle is an anchor with a chain entwined around it. -
Frankston RSL Sub Branch
Cap, Forage
Used as ceremonial headress of "other ranks" in the RAAF, with awith oxidised brass other rank's cap badge, which is not attached.RAAF blue wool barathea forage cap with holes on left hand side (the normal oxidised brass other rank's cap badge is not attached) to the front left side and pair of black plastic RAAF buttons on the front. The crown opening has been sewn up with large black running stitches in heavy black thread. The inside crown is lined with navy polyester with a stitched lining that bears various marking on the size, date of manufacture, type/style markings, including a stamping of a the broad arrow with letters either side "G" & "Y".V 330 1944 MADE IN AUSTRALIA SIZE 6 7/8raaf headress, forage cap, cap -
Frankston RSL Sub Branch
Collection, Military Badges and Insignia
... 1 era military badges and insignia from Australia, New... General Hospital, Australian Medical Corp, A.I.F. The metal badges ...Framed collection consisting of a large number of World War 1 era military badges and insignia from Australia, New Zealand, Britain and other countries. The collection features a set of three medals as the centrepiece which were awarded to an Australian serviceman, Acting Warrant Officer Alwin Stevens Nicholas, service number 4752 of the 3rd Australian General Hospital, Australian Medical Corp, A.I.F. The metal badges and insignia are mounted on a black felt cloth background over a wooden backing and housed in a wooden frame. There is no glass front to the frame. for more details about A S Nicholas refer: < https://recordsearch.naa.gov.au/SearchNRetrieve/Interface/ViewImage.aspx?B=7998061 >none -
4th/19th Prince of Wales's Light Horse Regiment Unit History Room
Flag, 173rd Airborne Brigade (US)
173 AIRBORNE BRIGADE (SEPARATE) US ARMY 1 RAR BATTLE GROUP BIEN HOA 1965-1966 On May 5, 1965, the Brigade deployed to South Viet Nam as the first US Army ground combat unit in that war. Upon arrival, the 1st Battalion of the Royal Australian Regiment (1 RAR) and a battery from New Zealand (161Royal NZ Artillery) were attached to the Brigade -- making the 173d Airborne the only multi-national combat unit in the war. Initially headquartered in Bien Hoa, the Brigade operated in the four provinces around Saigon. (Xuan Loc, Long Khanh, Phuoc Long & Phuoc Tuy), but (in its roll as a "Fire Brigade") also went to the Central Highlands (Pleiku / Kontum) to fight Viet Cong. The 173d also conducted constant operations against the southern stronghold of the VC Main Force in the legendary Iron Triangle in War Zone D. The brigade was organized as a balanced airborne combat force consisting of two infantry battalions, an artillery battalion, a support battalion, an engineer company, a cavalry troop, an armour company, and a headquarters company. Upon activation, it became the first and only separate airborne brigade in the United States Army. This was the beginning of a long series of "Firsts" for the Brigade. On 5 May 1965, it became the first US Army ground combat unit committed to the war in South Vietnam, where further organizational changes were to take place. Australians attached to the Brigade were: 1st Battalion, of the Royal Australian Regiment (I RAR) and support troops of the 4/19th Prince of Wales Light Horse Regiment (1Troop), 105 Field Battery Royal Australian Artillery, 161 Field Battery Royal New Zealand Artillery, 3 Field Troop Royal Australian Engineers, 161 Reconnaissance Flight, Royal Australian Army Air Corps, 1st Australian Logistical Support Company. The Brigade's two infantry battalions, the First Battalion of the 503' Infantry (1/503`d) and the Second Battalion, of the 503`d Infantry (2/503`) and the attached Australians of 1 RAR constituted the infantrymen available to the Brigade. Their mission was to protect the Bien Hoa Air Base and to close with and destroy or capture the enemy. This was in fact the first operational ground force formed under the ANZUS Defence Treaty. ANZUS was a mutual defence treaty signed in 1951 between Australia, New Zealand and the United States of America. In 1965 the spirit of this treaty appeared as 173d Airborne Brigade (Sep) a tri-national brigade. The only such tri-national fighting force formed during the Vietnam War. On deployment to South Vietnam in 1965, 1 Troop A Squadron, 4th/19th Prince of Wales's Light Horse Regiment was part of the US 173rd Airborne Brigade combat group. Flag, two colours divided vertically, hoist half mid blue, fly half red. Badge of 173rd Airborne Brigade (730 x 490 mm) in centreflag, 173rd airborne, south vietnam -
4th/19th Prince of Wales's Light Horse Regiment Unit History Room
Textile - Prayer mat, 2007
Souvenir of unit member from his deployment to SECDET XI of Operation Citadel, BAGDAD-IRAQ, Mar-Sep 2007Souvenir prayer mat. Embroidered with flags of Australia, Operation Catalyst and Afghanistan, Rising Sun badge flanked by crossed swords, SECDET XI, Map of Iraq surrounded by "OPERATION CITADEL", BAGHDAD-IRAQ, kangaroo and camel, MAR-SEP 2007souvenirs, afghanistan, embroidery, emblems, iraq -
4th/19th Prince of Wales's Light Horse Regiment Unit History Room
Uniform- RAN, CTE Pty Ltd, 2011
RAN service issue uniformMembers of 4th/19th Prince of Wales's Light Horse Regiment were deployed with the RAN in Australian Border Force. Uniform reflects joint service operation. Royal Australian Navy camouflage pattern uniform shirt and trousers. With velcro attached badges: member name "Hall", RAN White Ensign, RAN badge, epaulette badges of rank - Petty Officer. 8415 66 157 0577 -
4th/19th Prince of Wales's Light Horse Regiment Unit History Room
Framed Photograph, 4th Australian Light Horse - France, c 1915
Framed photo of Tpr Collins and Sgt Stark of 4th Australian Light Horse Regiment. Upper body shot, plain background. Members are in uniform. Sgt Stark is not wearing unit colour patch nor collar badges nor badges of rank. Perhaps photo was taken early in their service. Caption - 4th Australian Light Horse - France. 1087 Tpr James Collins, born 1890 Seymour Vic. B Squadron 7th Reinf . Enlisted 30th December 1914 RTA 11 May 1919 Wounded in the neck at Messines 7th June 1917. 1118 Sgt William Stark, born Casterton, Vic. B Squadron 7th Reinf Enlisted 4th January 1915 RTA 12th June 1919 WIA 7th June 1917 -
4th/19th Prince of Wales's Light Horse Regiment Unit History Room
Framed Photograph, 4th Australian Light Horse - France, c 1915
Framed photo of 1098 Cpl George Koehn MM, 4th Australian Light Horse. He is in uniform, standing at ease, plain background. He is wearing 4 LH colour patch but no collar badges nor badge of rank. Perhaps photo was taken in Melbourne prior to embarkationCaption - 4th Australian Light Horse - France 1098 Cpl George Koehn MM born 1893 Howlong NSW B Squadron 7th Reinf Enlisted 4th January 1915 RTA 11th May 1919 -
4th/19th Prince of Wales's Light Horse Regiment Unit History Room
Uniform, Service Dress WW1, c 1914
Sir Murray William James Bourchier (1881-1937), grazier, soldier and politician, was born on 4 April 1881 at Pootilla, Bungaree, Victoria, eldest son of Edward Bourchier, Geelong-born farmer, and his wife Francis (Fanny), née Cope. In 1878 Edward and his three brothers had taken up four adjoining selections on the Murray River near Tocumwal. Within a few years their properties had expanded considerably: Edward's, near Strathmerton, was called Woodland Park; the other three were known collectively as Boomagong. After a private education in Melbourne, Murray returned to Woodland Park. From 1909 until the outbreak of World War I he commanded a troop of light horse at Numurkah, attending annual camps and courses. Bourchier's military service was distinguished. He enlisted in the Australian Imperial Force in August 1914 and sailed as a lieutenant in the 4th Light Horse Regiment, serving seven months on Gallipoli. After the Sinai campaign in 1916-17, during which he was promoted lieutenant-colonel commanding his regiment, he made the crucial final assault on Beersheba. On 31 October 1917 he led his men, many of them from his own district, at full gallop over two miles into Turkish entrenchments and on for a further two miles (3.2 km) into Beersheba to capture vital wells before the Turks could destroy them. Lacking sabres, the regiment used bayonets held in their hands as shock weapons. For this exploit he was awarded the Distinguished Service Order and earned the sobriquet 'Bourchier of Beersheba'. Eleven months later, after fighting north through Palestine, he commanded a joint force of the 4th and 12th Light Horse regiments (Bourchier Force) in the final advance on Damascus; on entering the city the 4th captured 12,000 Turks and set about relieving their sufferings. Bourchier was three times mentioned in dispatches. He was appointed C.M.G. in June 1919 and his A.I.F. appointment ended in October. In 1921 he was promoted colonel, commanding the 5th Cavalry Brigade, and in 1931 brigadier, in charge of the 2nd Cavalry Division. He returned to Strathmerton but later farmed a property at Katandra, which he named Kuneitra. - Source: Australian Dictionary of BiographyService dress of General Sir Murray Bourchier, complete with jacket, trousers, shirt, tie, boots (high rise),Sam Browne belt, peaked cap, medal ribbons, badges of rank, medal ribbons -
4th/19th Prince of Wales's Light Horse Regiment Unit History Room
Uniform, Mess Kit, c 1914
Sir Murray William James Bourchier (1881-1937), grazier, soldier and politician, was born on 4 April 1881 at Pootilla, Bungaree, Victoria, eldest son of Edward Bourchier, Geelong-born farmer, and his wife Francis (Fanny), née Cope. In 1878 Edward and his three brothers had taken up four adjoining selections on the Murray River near Tocumwal. Within a few years their properties had expanded considerably: Edward's, near Strathmerton, was called Woodland Park; the other three were known collectively as Boomagong. After a private education in Melbourne, Murray returned to Woodland Park. From 1909 until the outbreak of World War I he commanded a troop of light horse at Numurkah, attending annual camps and courses. Bourchier's military service was distinguished. He enlisted in the Australian Imperial Force in August 1914 and sailed as a lieutenant in the 4th Light Horse Regiment, serving seven months on Gallipoli. After the Sinai campaign in 1916-17, during which he was promoted lieutenant-colonel commanding his regiment, he made the crucial final assault on Beersheba. On 31 October 1917 he led his men, many of them from his own district, at full gallop over two miles into Turkish entrenchments and on for a further two miles (3.2 km) into Beersheba to capture vital wells before the Turks could destroy them. Lacking sabres, the regiment used bayonets held in their hands as shock weapons. For this exploit he was awarded the Distinguished Service Order and earned the sobriquet 'Bourchier of Beersheba'. Eleven months later, after fighting north through Palestine, he commanded a joint force of the 4th and 12th Light Horse regiments (Bourchier Force) in the final advance on Damascus; on entering the city the 4th captured 12,000 Turks and set about relieving their sufferings. Bourchier was three times mentioned in dispatches. He was appointed C.M.G. in June 1919 and his A.I.F. appointment ended in October. In 1921 he was promoted colonel, commanding the 5th Cavalry Brigade, and in 1931 brigadier, in charge of the 2nd Cavalry Division. He returned to Strathmerton but later farmed a property at Katandra, which he named Kuneitra. Source: Australian Dictionary of BiographyMess kit of General Sir Murray Bourchier complete with peaked cap, jacket, cummerbund, shirt, tie, waistcoat, trousers, shoes, AMF lapel badges & badges of rank -
4th/19th Prince of Wales's Light Horse Regiment Unit History Room
Plaque, abt11990
The 4th and 17th Light Horse are ancestor regiments of the 4th/19th Prince od Wales's Light Horse RegimentWooden, shield shaped plaque on which is affixed badges of 4th Light Horse Regiment, 17th Light Horse Regiment, Royal Australian Armoured Corps, and 4th/19th Prince of Wales's Light Horse Regiment. It lacks the badge of the 19th Light Horse Regiment, but there is a place for it. Steel mounting hooks are screwed to the backOn back In white paint" "10 WAMI R-P" Scratched in: "4/19 PWLH SGTS MESS 97" -
4th/19th Prince of Wales's Light Horse Regiment Unit History Room
Souvenir - Scarf, framed, 1916
Sgt Roy Arthur Heuston Taggart, 4th Australian Light Horse Regiment, Grazier of Hawthorn, born 4 Sep 1888, enlisted 19 July 1915, 12th Reinforcements. Awarded Distinguished Conduct Medal for outstanding services during Flanders operations.Historic item by original member of 4ALHRectangular embroidery in glass fronted wooden frame. Background is colour patch of the 4th Australian Light Horse Regiment, diagonally divided with upper left section white and lower part red. The Australian Coat of Arms (in red) is at the upper left. Embroidered in red at top centre: "4th Light Horse Regiment 1st Division Egypt 1916". In gold thread at bottom right: Aust Army rising sun badge. . It is edged with white tassels at top and left and gold tassels at right and lower edge.Embroidered in gold thread : "From Roy"embroidery, 4th light horse, roy taggart, scarf as gift to family -
4th/19th Prince of Wales's Light Horse Regiment Unit History Room
Recruiting Poster, abt 1990's
Australian Army Reserve was previously Citizen Military ForcesRecruiting poster for 4th/19th Prince of Wales's Light Horse Regiment (CMF). Poster depicts a M113A1 Armoured Pesonnel Carrier. Incorrect spelling of name of Regiment- "Wales' instead of "Wales's". Crew of APC are wearing Corps rather than Regimental beret badgesArmy Publicity 1052c Issued by Director of Army Recruiting -
Flagstaff Hill Maritime Museum and Village
Uniform - Tunic, 1899-1903
This original tunic or jacket is part of the full dress uniform of the pre-Federation Victorian Permanent Artillery regiment. Its owner had the rank of Sergeant, as indicated by the three inverted chevrons. The Artillery design of the badges and buttons indicate the date of the tunic to be from 1893 to 1903. However the maker of the tunic, W. Moncton, began manufacture in Melbourne in 1899, so this the tunic can be dated between 1899 and 1903. The donor's grandfather was given this tunic but not the name of the original owner. It has since been suggested to the family that the tunic was worn by a local Western District Light Horse member. This could very well have been the case because mounted troops were officially referred to as the Light Horse in the late 19th to early 20th century. Several local men were involved in the Light Horse during the First World War. The donor's grandfather wore this tunic in the local district when riding a penny farthing bicycle. The donor's father also wore the tunic when dressed as a 'Captain' hosting a local disco dance. BRIEF MILITARY HISTORY- The Crimean War began In 1854 and many people in colonial Australia were afraid of a Russian attack. Volunteer forces were established to strengthen the British Imperial troops posted here. A battery of artillery was raised in Victoria as well as in other Australian states. In 1870 Australia became responsible for its own naval and military defence. The Volunteer Corps and Victorian Navy shared the responsibility of defending the existing forts, assisted by volunteer coastal and mobile field batteries. The Permanent Victorian Artillery force was established. It was disbanded in 1880 then re-formed in 1882 as the Victorian Garrison Artillery Corps. In 1895 the Geelong, Warrnambool, Port Fairy and Portland Batteries became part of the Western District Garrison Artillery. Many of the volunteers who served in the Artillery were from rural areas. They belonged to rifle clubs and were experience horsemen as well. Australia's defence at this time relied on these mounted troops, or Light Horse men. In 1899 the Victorian Garrison Artillery Corps amalgamated with the New South Wales and Queensland Permanent Artillery to become the Victorian Regiment of the Royal Australian Artillery (RAA). Then prior to Federation, the RAA and the Permanent Artillery of South Australia, Western Australia and Tasmania all combined, becoming the Royal Australian Artillery Regiment with two Batteries of Field Artillery; Battery A from Sydney and Battery B from Melbourne.This original uniform tunic of the pre-Federation Victorian Permanent Artillery is significant for its association with Australia's military defence and the fortifications of our district, state and country. The tunic is also significant, representing part of the history and evolution of uniforms in the Australian military forces. The tunic is also significant in its representation of Australia's independence in forming its own defences. The tunic has local significance in its connection with local social events.Tunic or jacket, part of the full dress uniform of the pre-Federation Victorian Permanent Artillery operating from 1893 to 1903. Original, single-breasted tunic of dark blue wool, red piping trim, black cotton lining in body. Sleeves lined with blue striped, white cotton. Front closure has eight brass buttons. Red band-style collar with hook-and-eye closure has gold bullion braid trim and a brass badge pinned each side at the front. Upper right sleeve has three inverted chevrons on red fabric with gold bullion braid trim (rank of Sergeant). Both sleeves have gold bullion braid 'Austrian knot' emblems stitched onto lower arm, with ends finishing on the inner sleeve. Shoulder epaulettes have red piping and smaller brass buttons. Closed back vent has vertical scalloped design with six brass buttons, in two columns of three, and red piping trim. Brass belt hook is attached to the left back waist, close to the seam (right side has a mark indicating a previous similar clip). Inside left breast is a concealed pocket. Tunic has both machine and hand stitching. All brass shank-style buttons have matching Artillery emblems with inscriptions on the back. The two brass collar badges have additional artillery emblems of exploding grenade and star as well as an inscription. Buttons were made for W. Moncton, of Melbourne and marked with his name. He traded from 1899, dating the tunic to between 1899 and 1903.Button front: Artillery emblem on front (field cannon facing left, in front of a muzzle-loading ram rod). Button back: engraved "W. MONCTON . MELBOURNE ." Collar badges: Artillery emblem (field cannon facing right | stars | exploding grenade | "AUSTRALIA")flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, uniform jacket, uniform tunic, garrison volunteer uniform, fortifications in victoria, victorian permanent artillery, pre-federation military uniform, sergeant's uniform, jacket, militia, victoria, victorian volunteer forces, victorian regiment, royal australian artillery, raa, field gun, sergeant, w. moncton, garrison, dress uniform, tunic, scarlet collar, red collar, scarlet piping, red piping, gold bullion, artillery emblem, light horse, artillery, mounted troops, victorian garrison artillery corps