Metal tongue depressor (blade). The depressor is bent in a curve at one end, and bent 90 degrees square at the other end. Depressor shaft has serrations on the lower outer aspect. At the upper end of the shaft there is a longer, wider flange with multiple serrations under the proximal point. This object fits into the Boyle Davis mouth gag (see item 254).- The number '21' is written on the inner aspect of the blade. The text 'P.R & Co.' are inscribed on the outer distal end. '21', 'P.R & Co.'

This wooden spear has the tip and spear shaft fashioned from one piece of wood. Sinew and resin are used to reinforce the neck of the spear. The tip is flattened and barbed. The barb is bound to the tip with sinew.

This all-metal centre pop punch tool has a rounded point, thick body and flat round head. The centre of the body is concave to allow a strong grip. This also creates a flat side and would prevent the tool from rolling off the workbench. The ‘centre pop’ in a shipwright’s toolbox may have been used as a punch to remove the ‘eyes’ from a ‘dead eye’ pulley or other jobs that needed a hole removed from the work. The shipwright’s tools on display in the Great Circle Gallery are connected to the maritime history of Victoria through their past owner, user and donor, Laurie Dilks. Laurie began his career as a shipwright in the mid-1900s, following in the wake of the skilled carpenters who have over many centuries used their craft to build and maintain marine vessels and their fittings. You can see Laurie’s inscription on the tool called a ‘bevel’. Laurie worked for Ports and Harbours, Melbourne, for over 50 years, beginning in the early 1960s. He and a fellow shipwright inscribed their names on a wheelhouse they built in 1965; the inscription was discovered many decades later during a repair of the plumbing. Many decades later Laurie worked on the Yarra moving barges up and down the river and was fondly given the title ‘Riverboat Man’ His interest in maritime history led him to volunteer with the Maritime Trust of Australia’s project to restore and preserve the historic WWII 1942 Corvette, the minesweeper HMAS Castlemaine, which is a sister ship to the HMAS Warrnambool J202. Laurie Dilks donated two handmade displays of some of his tools in the late 1970s to early-1980s. The varnished timber boards displayed the tools below together with brass plaques. During the upgrade of the Great Circle Gallery Laurie’s tools were transferred to the new display you see there today. He also donated tools to Queenscliffe Maritime Museum and Clunes Museum.The shipwright’s tools on display in the Great Circle Gallery are connected to the maritime history of Victoria through their past owner, user and donor, Laurie Dilks. Laurie began his career as a shipwright at Ports and Harbours in Melbourne in the mid-1900s, following in the wake of the skilled carpenters who have over many centuries used their craft to build and maintain marine vessels and their fittings.Centre pop tool; all metal punch with a flat head, wide handle section and a shaft that tapers inwards towards the end. It is shaped for a good grip. It once belonged to shipwright Laurie Dinks.flagstaff hill, warrnambool, great ocean road, shipwreck coast, maritime museum, maritime village, shipwright, carpenter, shipbuilding, ship repairs, hand tool, equipment, ship maintenance, cooper, tool, marine technology, shackle punch, breakdown tool, chains, links, centre pop, punch, laurie dilks, l dilks, port and harbours melbourne

Hand written notes:- Duchess of Edinburgh. New Chum L/R. Reference: M. D. Depth of shaft - 830 feet. Working - 1874 - 1903. Same grou;nd as Albert & Coy.mine, gold, duchess of edinburgh, duchess of edinburgh, new chum l/r, albert & coy.

Copy of a Geological Map of the Bendigo Gold Field. Map shows Lines of Reef, Anticlines, Synclines, Shafts, Alluvial Contours Gullies and some street names. Copy is hard to read. There are two pages.bendigo, history, long gully history group, the long gully history group - geological map - bendigo gold field, mines department, h herman, lightning hill line, hustlers line, derby line, paddy's gully line, garden gully line, deborah line, sheepshead line, new chum line, nell gwynne line, british and foreign line, napoleon line, carshalton line, thistle line, christmas line, lancashire line

Used for endometrial biopsy. This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Stainless steel curette. Consists of a small handle section with finger grip and a slender metal shaft, ending in a hollowed, squared point. Writing engraved on handle of device reads 'martin GERMANY STAINLESS'.'martin GERMANY STAINLESS'gynaecology

White enamel candle holder. Centre section broken off. Card accompanying item reads "Miner's Candle - 1890 - Found after reopening of shaft 1961. R Burton Victoria Street." . miner's candle, mining equipment

A Bussey Club badminton racquet, with grooved handle grip. Impressed model name across throat, and manufacturer's name along shaft, on obverse. Materials: Wood, Gut, Leather, Glue, Lacquer, Metaltennis

A miniature Grays squash racquet, with plastic tape whipping around shoulders and shaft, and velvetine handle grip. Materials: Wood, Adhesive tape, Nylon, Ink, Paint, Cloth, Glue, Lacquer, Velvetinetennis

A miniature Grays tennis racquet, with plastic tape whipping around shoulders and shaft, and vinyl handle grip. Materials: Wood, Adhesive tape, Nylon, Vinyl, Ink, Paint, Cloth, Glue, Lacquertennis

A Markwort Speed King Professional tennis racquet, with string whipping around shoulders and shaft. Materials: Wood, Ink, Glue, Lacquer, Metal, Nylon, Enamel, Leather, Plastic, Adhesive tape, Fibreglasstennis

A Dunlop 'Blue Max' mid-size, split shaft tennis racquet, with black plastic bridge. Materials: Leather, Adhesive tape, Synthetic material, Ink, Plastic, Metal, Graphite, Kevlar, Painttennis

A short stemmed Fox 'GT' split shaft tennis racquet, with black plastic bridge, and netted with Wilson 'Championship' strings. Materials: Metal, Leather, Ink, Adhesive tape, Nylon, Plastic, Painttennis

A Prince 'Pro' split shaft oversize tennis racquet, and vinyl cover. Materials: Nylon, Metal composite, Plastic, Adhesive tape, Ink, Synthetic material, Leather, Vinyl, Metal, Plastic, Inktennis

An unstrung Pro Kennex 'Power Dominator' split shaft tennis racquet, with black plastic bridge. Materials: Metal, Composite Materials, Paint, Plastic, Adhesive tape, Leather, Ink, Adhesive labeltennis

Model 4-stroke motor with one side cut away to show exhaust valve and cam shaft below. Crankshaft below cutaway piston. Bolted on to a wooden block. used for teaching Arboriculture.arboriculture, 4-stroke motor, teaching, model

A sailing block is single or multiple pulleys with one or more sheaves that are enclosed in an assembly between cheeks or chocks. In use, a block is fixed to the end of a line, to a spar, or a surface. A rope line is reeved through the sheaves, and maybe through one or more matching blocks at the far end, to make up what's known as a tackle. The purchase of a tackle refers to its mechanical advantage. In general, the more sheaves in the blocks that make up a tackle, the higher its mechanical advantage. The matter is slightly complicated by the fact that every tackle has a working end where the final run of rope leaves the last sheave. More mechanical advantage can be obtained if this end is attached to the moving load rather than the fixed end of the tackle. Various types of blocks are used in sailing. Some blocks are used to increase mechanical advantage and others are used simply to change the direction of a line. A ratchet block turns freely when a line is pulled in one direction but does not turn the other direction, although the line may slip past the sheave. This kind of block makes a loaded line easier to hold by hand, and is sometimes used on smaller boats for lines like main and jib sheets that are frequently adjusted. A single, large, sail-powered warship in the mid-19th century required more than 1,400 blocks of various kinds and sizes. An item from an old sailing vessel from the late 19th to early 20th century, unfortunately, the item cannot be identified as to what vessel it belonged to. It does however give an insight into a piece of sailing equipment that's design is still in use today on pleasure sailing craft. Wooden closed spelter double rope block with two pully's between sheaves, block has metal frame around outside of the sheaves and 4 metal pins, 2 each side of the frame at top and 2 at bottom, joining the sheaves together. The shaft between the sheaves is also wooden. Remnants of orange and black paint on outside of block. Shafts are chipped, wood has borer holes. (NOTE: Block was rediscovered after relocating objects to new storage area)Noneflagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, sailing ship, pulley, block, sheave, ship equipment, rope block, sail rigging

Black and white photo. Central Deborah Gold Mine, corner Violet and Creek Streets, Bendigo. 1939-1954. Shaft 1347 feet deep. Gold extracted 29,460 ounces. This mine was purchased by the Bendigo City Council to be retained as a Mining Museum. Markings/Inscriptions: Central Deborah Mine. Corner Violet and Creek Streets. 1939-1954. Shaft 1347 feet. Gold 29,460 ozs. This Mine has been purchased by the Bendigo City Council to be retained as a Mining Museum.organization, business, central deborah gold mine

A Chemold Rod Laver Sovereign tennis racquet, with ribbon whipping around shoulders, and leather grip featuring quatrefoil perforations. Chemold logo features across base of head. Model name features across throat and shaft, accompanied by a mounted fleur-de-lis device. Chemold trademark with large 'C' features on lower shaft and black butt cap. Materials: Wood, Nylon, Ink, Plastic, Leather, Rubber, Glue, Lacquer, Metal, Adhesive tape, Ribbontennis

A Chemold Rod Laver Sovereign tennis racquet, with ribbon whipping around shoulders, and leather grip featuring quatrefoil perforations. Chemold logo features across base of head. Model name features across throat and shaft, accompanied by a mounted fleur-de-lis device. Chemold trademark with large 'C' features on lower shaft and black butt cap. Materials: Wood, Nylon, Ink, Plastic, Leather, Rubber, Glue, Lacquer, Metal, Adhesive tape, Ribbontennis

A Chemold Roy Emerson Contender tennis racquet, with ribbon whipping around shoulders. Chemold logo features across base of head, flanked by the Roy Emerson signature trademark. Blue silhouette image of male playing tennis features on throat. Model name features along shaft. Chemold trademark with large 'C' features on lower shaft and black plastic butt cap. Materials: Wood, Nylon, Ribbon, Paint, Ink, Plastic, Glue, Lacquer, Metal, Adhesive tapetennis

An Oliver International tennis racquet, with ribbon whipping around shoulders and shaft, and leather handle grip with continuous patterned perforations. Oliver logo featurs across crown, along shaft, and across butt cap. Model name features across base of head. Illustrated decal of stylised kangaroo features on throat. Reproduced signatures of Anderson and Sedgman feature on the sides of throat. Materials: Wood, Gut, Leather, Ink, Glue, Lacquer, Metal, Ribbon, Fibreglass, Rubber, Enamel, Adhesive tapetennis

A Snauwaert Orion tennis racquet, with string whipping around shoulders and shaft, diagonal nylon stringing, and leather handle grip with floral perforations. Model name features across base of head, flanked by starburst devices. Diagonal grid design features on throat. Snauwaert logo features along shaft, with 'S' trademark in globe device below. 'S&D' trademark features on butt cover. Materials: Wood, Nylon, Leather, Ink, Glue, Lacquer, Metal, String, Enamel, Adhesive tapetennis

A Dunlop Lewis Hoad tennis racquet, with ribbon whipping around shoulders and shaft, and leather handle grip with floral perforations. Dunlop logo features across base of head. On obverse, a full-body action illustration decal of Hoad features on throat, and Lewis Hoad signature reproduction across shaft. Dynamic 'D' trademark features on black plastic butt cover. Materials: Wood, Nylon, Ink, Leather, Glue, Lacquer, Metal, Enamel, Adhesive tape, Plastic, Ribbontennis