This bucket was used in the Tawonga District Hospital when it was built in the early 1950's and later in the Mt Beauty Hospital. All enamel equipment was eventually replaced with stainless steel. The Tawonga District Hospital was built as the Kiewa Valley population increased due to the Kiewa Hydro Electric Scheme.White enamel bucket with a black lip around the top. It has a thick wire handle with a wooden handle in the centre. The bottom of the bucket is 30 mm above the ground as the bucket rests on the base of the wall of the bucket. The top extends outwards for 5mm then upwards for 75 mm.enamel bucket, tawonga district hospital, kiewa hydro scheme

Stamp three: wooden handle, metal casing containing the operating system for a rotating belt of numbers which can be changed to record the current date. There is a rubberised stamp surface, with wording that reads 'RECEIVED. WINLATON". A window for a date appears in the centre between the two words. The date on this stamp is set to '8 December 1992'. This is the day after the Winlaton institution was permanently closed.

A Spalding 'Oval' model tennis racquet, featuring laminate convex throat & fine-grooved octagonal wooden handle. Model name printed on throat on obverse, and manufacturer logo printed on throat on reverse. Materials: Wood, Metal, Lacquer, Glue, Gut, Ink, Stringtennis

Used in the 19th century.A curved wooden handled adze with a forged steel head which has a wide cutting blade and a small 5cm steel knob on top. It was used by woodworkers for cutting and trimming rough wooden planks and shaping ans smoothing wooden surfaces in the late 19th century.woodworking tools, wood, steel, froes, cleaving axes, axes, cutting tools, hand axes, adzes

Used in the late 18th or early 19th century.A small steel double curved pointy hooked bag hook with a turned wooden handle on the top. The handle is attached through a hole in the steel and riveted to the the hook. It was used to assist with lifting large bags of wheat, fertiliser and so on in the late 18th or early 19th century. agricultural equipment, farm equipment, bag hooks

Sharpening is done by grinding away material on this implement with an abrasive substance harder than the material of the tool to be sharpened. A sharpening wheel is an efficient way to sharpen blade edges.Mobile knife-sharpening services are no longer commonly used. In the disposable society of the 21st century we can throw away our blunt scissors, knives or tools and buy replacements.A cast iron knife or tool sharpening wheel attach to a wooden base. It has a wooden turning handle.A McMillan Federal Knife Cleanerknife-grinder

These umbrellas are typical of the ones women would have used early in the 20th Century. It was important to keep the rain from damaging their clothing as washing facilities were limited. .These umbrellas are charming and retained for display purposes..1 An umbrella with a wire frame and a wooden handle. The frame is tipped with ivory coloured composite material. The handle has a red tassel. The covering is a multi coloured cloth with a pink edge. The inner section has a cream background with pink and light brown leaves, branches and flowers. The outside is faded. .2 An umbrella with a black wire frame and a wooden handle. There are tips on the end of the frame. The handle is varnished and ornamented red and black. It has a string tassel in red, white and blue and a corded wrist band. There is writing on the frame. The covering is corded rep with a multi-coloured floral pattern and has a faded, wide navy edging..2 BRITISH MADEumbrellas, vintage clothing

Used in the timber industry in the Orbost district. This is a two person operated cross cut saw which functions as a pit saw. A log is placed over a pit lengthways. The man on the top walks along the log and pulls the saw upwards, and he man below pulls the saw downwards. This saw therefore cuts in both directions. This type of saw was often used in the ship building industry for cutting planks.A long raker saw which has been installed into the Slab Hut Shed in a vertical position as a pit saw. It has a metal handle extension at the top which has a wooden handgrip attached. Towards the bottom of the saw, a wooden handle had been added to the saw. timber-industry-tool raker-saw pit-saw

Donated by the Harry Cameron family, Harry's father, James Cameron, came to Bellagoogan on Majors Creek in 1882. Bellagoogan was on Majors Creek near Orbost and was the site of the first race course. Like many other at the time, the Camerons bred race horses.Harry died in 1964 aged 75.Hand saw with a skew-back, steel blade and a wooden handle. It has three metal saw pins and a medallion marked 'warranted superior'. There is a chip carved wheat sheaf decorating the front hand grip. This handsaw is probably a Disston Keystone K-4 Air MasterOn a metal disc around a keyhole is "Warranted Superior".tool timber-industry handsaw

Eltham Shire Council Health Department Inspectors - possibly used for stamping meat Cross Ref: EDHS_01870-13 - Dianne Yans, Health Inspector, undertaking inspections at Safeway Supermarket, 1989Self inking rotating brass roller with "ESC" raised surfaces in four locations at 90 degrees. Roller mounted between two brass arms contacts a felt pad (dampened with ink - red residue evident) covered by pivoting brass cover; with fromed wooden handle Stamped on side of brass support arms M. Lober P/L Melbourne Pat Pend 3198 \ 6eltham shire council, health inspector, shire of eltham, meat stamp

Given to Barbara NUGENT by local male resident in 1980s. Displayed at the heritage exhibition, Seamen's Mission, 1988.Hand-made shopping trolley (or jeep). Construction: wooden frame, three-ply metal arms, wooden handle, rear cloth pocket, pram wheels, metal foot plate with Dunlop "kromhyo" kick plate, metal bands top and bottom. (Ref item 15)domestic life, barbara nugent

A small steel oval shaped headed bale hook or hand grab with three of nine pointed hooks remaining and a turned smooth wooden handle. The metal head is attached through a hole in the handle with a rivet. It was used to assist with handling bagged goods without causing damage. agricultural equipment, farm equipment, bale hooks, hand grabs

Many butter churns were brought to Australia when people immigrated.A tall glass butter churn with a metal screw top lid, a metal handle to hold it steady and a turning mechanism on the top. There is a wooden paddle inside the churn which is rotated by a wooden handle attached to the mechanism on the top of the churn. German butter churns usually appeared like this.butter churns, churns, food processing equipment, butter, milk, kitchen equipmnet

The original owner of the beautiful wardrobe was William Swinton Jr. (1860-1929) and was later given to a friend of the Giles family. It is part of the Giles Collection. William Swinton Jnr. was a Warrnambool Councilor 1903-20 and Mayor 1917-19, during which time Warrnambool declared a City (1918). William's father, William Swinton Snr. (c.1831-1901) arrived in Warrnambool in 1854 from Edinburgh, Scotland. He established the Swinton store in Timor Street in 1865 where it is still located. William Snr's grand-daughter, Doris Swinton (1904-1986) was one of Australia's most highly decorated nurses of World War 2 and for 16 years matron of the Warrnambool and District Base Hospital. There is a street in Warrnambool named after the Swinton family. The Giles Collection: There are many 19th century items of furniture, linen, and crockery donated to Flagstaff Hill Maritime Village by Vera and Aurelin Giles. The items are associated with the Giles Family and are known as the "Giles Collection". These items mostly came from the simple home of Vera's parents-in-law, Henry Giles and his wife Mary Jane (nee Freckleton), whose photos are in the parlour. They married in 1880. Henry Giles was born at Tower Hill in 1858. He was a labourer on the construction of the Breakwater before leaving in 1895 to build bridges in N.S.W. for about seven years. Mary Jane was born in 1860 at Cooramook. She attended Mailor's Flat State School where she was also a student teacher before, as a family legend has it, she became a governess at "Injemiara" where her grandfather, Francis Freckleton, once owned land. Henry and Mary’s family of six, some of whom were born at Mailor’s Flat and later children at Wangoom, lived with their parents at Wangoom and Purnim west, where Henry died in 1933 and Mary Jane in 1940. The wardrobe is also significant for its association with early Warrnambool history, being owned by William Swinton Jnr. who was a Warrnambool Councilor and Warrnambools first Mayor (1917-19) the son of an early colonial family, arriving in Warrnambool in 1854. The Giles family collection also has social significance at a local level, because it illustrates the level of material support the Warrnambool community gave to Flagstaff Hill when the Maritime Museum was established.Wardrobe, colonial, made of cedar wood. The doors of the wardrobe have a mirrored door between them and there are two large drawers below the doors, each drawer has two round wooden handles. The wardrobe was once owned by a William Swinton Jnr. It is now part of the Giles Collection.Noneflagstaff hill, warrnambool, shipwrecked-coast, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, wardrobe, bedroom furniture, domestic furniture, william swinton jnr., warrnambool's first mayor, warrnambool mayor, giles collection, henry giles, tower hill, cooramook, warrnambool breakwater, mailor’s flat, wangoom, 19th century furniture, doris swinton, swinton street warrnambool

Presented to Cr J K McCaskill by J C Taylor & Sons Pty Ltd.|To lay Foundation Stone of the Ringwood Town Hall 27.6.1936.Wooden handled silver trowel with engravings EPNS - Apex. On trowel: Two bands of circular cut-outs on handle. Small knob on end of handle. In a presentation box - lined with pale blue silk. +Additional Keywords: McCaskill, Cr J K / Taylor, J C & SonsPresented to Cr J K McCaskill by J C Taylor & Sons Pty Ltd.; To lay Foundation Stone of the Ringwood Town Hall 27.6.1936.

This iron is typical of the electric irons used in the 1950s. It didn't have a thermostat like the irons that followed so care had to be taken not to leave it on too long. Women in their domestic role used irons.The Kiewa Hydro Electric Scheme commenced in the late 1940s when Mt Beauty township was created. Amongst the shops in the main street was an SEC shop which sold electrical items. "Creda" Electric Iron with plug-in cord. A metal steel base iron with a wooden handle and a thumb rest. The handle is bolted onto the iron with 2 large screws. The cord is coloured maroon except where it is repaired with black tape. The cord socket plugs in behind the handle of the iron. CREDA Cat. No 6; Man. No.; Volt 200; AMPS 2.7 iron, laundry, household, electric, pressing clothes, domestic

The rigger's knife is usually more square pointed and thicker than that of a sailmaker. ( C.W. Ashley 1944 Ashley book of Knots p. 19) The rigger usually had a kit of tools that would fit on a belt: a sheath knife, a marlingspike, and a grease horn containing tallow.Property of the anonymous donor a former seafarer who also presented us with two hand-crafted examples of knot tying.Knife; a wooden handle in two pieces either side of blade secured by two steel anchor points. The short steel blade is oxidised but the actual cutting edge is worn and honed. The yellow nylon sheath appears to be made from recycled material strongly stitched on two sides. Large font black lettering on the inside but indistinguishable.rigging, rigger, sailor, seamen

An hand-pushed, tricyclical line marker, with a paint chamber and conveyor wheel, distributing paint to the application wheel situated behind the chamber. Across a circular metal panel - situated between the stems connecting the chamber to the wooden handle - is the inscription: THE GEM. Materials: Wood, Metal, Lacquer, Painttennis

A rare example of a Type D Survival Knife issued to British RAF during the latter part of WWII.Heavy duty survival knife with single edged oval shaped broad blade and wooden handle contoured for grip. Two large screws secure the grips. The pommel end has a wrist cord hole (cord not present). See also item 2020.000034-2 (leather sheath). Blunt end of blade near grip there is engraved '27C/2360', reverse side is the makers mark 'Rodgers Sheffield England'.british airforce, survival knife, ww2, wwii, type d

Screw driver wooden round grooved handle. 34mmLflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Scythes were used with a long sweeping movement which made them much less tiring for labourers to use than reaping hooks or sickles though they still involved great physical labour and considerable skill to perfect. Both hands were in use and the operator did not have to bend his back to reach down to the crop. Scythes were not used as often on farms after the mechanisation of harvesting. They were still used for cutting awkward shaped small plots and for opening a path for the tractors. This item is an example of a tool used by the early settlers of the Orbost district. A curved wooden scythe handle with two nailed grips attached with metal rings. There is no blade. There is a metal hook at the bottom.scythe agricultural tool farming

An adze is an ancient and versatile cutting tool and has been in use for thousands of years. Adze are similar to an axe but with the cutting edge perpendicular to the handle rather than parallel. They have been used since the Stone Age. Adzes are hand tools used for smoothing or carving wood.The adze has been used for centuries for cutting and shaping wood. It is a maritime tool, as well as being used in other trades. This adze is an example of that tool.Tool; long wooden curved handle with a heavy shaped head, similar to an axe. Inscriptions are on the blade. Made in England.Stamped; "38" & "2" " Made in England"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, axe, adze, ship's adze, tool, hand tool, wood working tool, cutting tool

Red wooden turned handle with steel hooked shape blade. Blade is hook shaped with serrations on hooked area.No visible markingsdomestic items, food preparation, butter balls, curling tool, butter, kitchen, food, dairy.

These handsaws belonged to a Warrnambool furniture maker and dealer, Ernest Brighton Phillips (1875-1924). He learned cabinet making at the Warrnambool Box Works and established a furniture warehouse at the corner of Liebig and Koroit Streets in the late 1890s. By the early 20th century he had the largest furniture warehouse and factory in Victoria outside Melbourne and his furniture was sold all over Australia. He and his family lived at ‘Heatherlie’ in Koroit Street and today the site of this family home houses the retirement village complex known as ‘Heatherlie’. The makers of these saws was Robert Sorby of the Kangaroo Works in Sheffield, England. This business was established in 1928 and is one of the world’s premier manufacturers of specialist woodworking tools. These two tools are of some significance as they belonged to Ernest Phillips, a prominent businessman in Warrnambool at the end of the 19th and the beginning of the 20th centuries. These are also a good example of the type of tools used in the woodworking trade 100 years ago. These are two handsaws which belonged to Ernest Phillips. They have wooden handles attached to the blade by metal screws. One screw is missing on the larger saw. The blades are made of steel with serrated edges and they are inserted into a fold of steel along the top edge. The handles are well-worn and the blades are a little rusty. ‘Robt. Sorby Sheffield Cast Steel’ ‘E. Phillips’ ernest phillips, robert sorby, history of warrnambool