This image shows a semi-aerial view of commercial and official properties lining Ford Street, Beechworth, in approximately 1900. The tower of Christ Church of St Peter and St Paul can be seen in the middle section of the photograph, on the left-hand side of the street. The Church was constructed in 1858 with the tower added to the structure in 1864. Lantern slides, sometimes called 'magic lantern' slides, are glass plates on which an image has been secured for the purpose of projection. Glass slides were etched or hand-painted for this purpose from the Eighteenth Century but the process became more popular and accessible to the public with the development of photographic-emulsion slides used with a 'Magic Lantern' device in the mid-Nineteenth Century. Photographic lantern slides comprise a double-negative emulsion layer (forming a positive image) between thin glass plates that are bound together. A number of processes existed to form and bind the emulsion layer to the base plate, including the albumen, wet plate collodion, gelatine dry plate and woodburytype techniques. Lantern slides and magic lantern technologies are seen as foundational precursors to the development of modern photography and film-making techniques.This glass slide is significant because it provides insight into Beechworth's built environment and commercial and official infrastructure in the early Twentieth Century, around the time of Australia's Federation into one nation. It is also an example of an early photographic and film-making technology in use in regional Victoria in the time period.Thin translucent sheet of glass with a square image printed on the front and framed in a black backing. It is held together by metals strips to secure the edges of the slide.burke museum, beechworth, lantern slide, slide, glass slide, plate, burke museum collection, photograph, monochrome, ford street, christ church of st peter and st paul, church tower, landmarks, 1900, shopping facilities, public buildings, 1900s, built environment, streetscape

These photographs were taken by Caroline Winter, lecturer at the University of Ballarat. Horace Pickford was born at Clunes, Victoria. He was killed in action on 27 September 1917. According to his dossier Pickford was in the 58th battalion and was buried in the vicinity of Polygon Wood. Glyndwr Evans was a native of Treorchy in the Welsh Rhondda Valley. He emigrated to Australia with his parents who lived at Randwick in New South Wales. He attended the Ballarat School of Mines, and served on the Student's Magazine Committee in 1905. The following year Glyndwr took up a position as a solutionist at the Golden Horseshoe Mine at Kalgoorlie. In the application for a commission in the AIF Glyndwr stated at he had completed three years at the Ballarat School of Mines, obtaining a Mine Manager's Certificate of Competancy, an Assayers Certificate and additional certificates in Land Surveying, Electrical Technology, Metallurgy and Geology. Gyndwr was a member of the AIF 1st Australian Tunnelling Coy. He was killed in Action at Hill 60 on 25 April 1917 and is buried in Belgium at the Railway Dugout Burial Ground (Plot VII, Row G, Grave 33). (http://guerin.ballarat.edu.au/aasp/is/library/collections/art_history/honour-roll/honourroll_Evans.shtml) A number of colour photographs of World War One war graves of soldiers from the Ballarat district. .1) Horace Pickford's headstone, Tyne Cot Cemetery .2) Glyn Evans tombstone, Railway Dugouts Cemetery south of Ypres. 3. Railway Dugouts Cemetery, Glyn Evans tombstone has a poppy on it. university of ballarat, world war one, war graves, war cemetery, world war i, world war, pickford, evans, horace pickford, harry pickford

From January 1959 and until 1982, “Cosmopolitan Motion Pictures”, owned by Mr Peter Yannoudes (Παναγιώτης Γιαννούδης) and Mr Stathis Raftopoulos (Στάθης Ραφτόπουλος) travelled around Australia to entertain the Greek, Turkish, Indian and Yugoslav speaking population of Australia and provide a significant cinema culture. They travelled as far as Perth in WA, Adelaide in SA, Tasmania, Darwin in Nt, Canberra in ACT and Sydney and NSW. However they found themselves also in places like Berri and Renmark in NSW, where concentrations of migrants lived and thrived during the period. Initially they were travelling by train, carrying all their equipment by hand and placing them in boxes and suitcases. However after 1962 when they acquired their first automobile, travelling became less of a burden, nevertheless cumbersome and laborious. They carried with them initially two portable projectors (second one as a backup) and at times travelled with a third in order to ensure that technology will not be letting them down at the time of film projection. At times the films were projected onto a white sheet of cloth because there was no proper screen to project it on at the venue they were using. This projector stand was the actual projector stand used in their trips around Australia.Historic and rarity (only one left that was used by "Cosmopolitan Motion Pictures") Primary significanceMetal construction Projector tripod with a cloth on top to stop damaging the projectors. It has an adjustable height depending that extends to about 1.5 metres.T.J.N. Macey - Toolmaker and Manufacturing Engineerstand, tripod, projector, film, culture, language, greek, entertainment, yiannoudes, γιαννούδης, τρίποδο

From January 1959 and until 1982, “Cosmopolitan Motion Pictures”, owned by Mr Peter Yannoudes (Παναγιώτης Γιαννούδης) and Mr Stathis Raftopoulos (Στάθης Ραφτόπουλος) travelled around Australia to entertain the Greek, Turkish, Indian and Yugoslav speaking population of Australia and provide a significant cinema culture. They travelled as far as Perth in WA, Adelaide in SA, Tasmania, Darwin in Nt, Canberra in ACT and Sydney and NSW. However they found themselves also in places like Berri and Renmark in NSW, where concentrations of migrants lived and thrived during the period. Initially they were travelling by train, carrying all their equipment by hand and placing them in boxes and suitcases. However after 1962 when they acquired their first automobile, travelling became less of a burden, nevertheless cumbersome and laborious. They carried with them initially two portable projectors (second one as a backup) and at times travelled with a third in order to ensure that technology will not be letting them down at the time of film projection. At times the films were projected onto a white sheet of cloth because there was no proper screen to project it on at the venue they were using. This winder was part of the equipment they carried around Australia Historical significance Primarily as it is the actual unit used to manually rewind all films.A film rewinding gadget, perhaps home made, with a wooden base, two reels, and an metal winder used for transferring the film from one reel to the next."Premier - Made in England"winder, film, entertainment, language, greek, yiannoudes, γιαννούδης, plutarch

Vic WOOD (1939 - 02 October 2020) Born Melbourne, Victoria Vic Wood was an internationally renowned artist, craftsman and teacher from the 1970s. He studied gold and silversmithing, woodturning and cabinet making at Melbourne Teachers' College and Royal Melbourne Institute of Technology. He was a skilled woodturner who, as a lecturer at Melbourne College of Advanced Education, taught a generation of woodworkers. Best known as a master wood-turner, Vic Wood retired from lecturing in 1983 to become a full-time woodturner. He was a sought after demonstrator and presenter for all kinds of local and international events. His teaching philosophy was simple: ‘share everything, have nothing to hide, and have no secrets; for ultimately it is in giving that you receive’. Vic Wood was a foundation member and inaugural president of the Victorian Woodworkers Association (VWA). In 1923 the Victorian Woodworkers Association announced the establishment of an annual Vic Wood Scholarship. he intent of the award is to promote excellence in woodwork and to engender inclusive and supportive woodworking networks. This item is part of the Federation University Art Collection. The Art Collection features over 2000 works and was listed as a 'Ballarat Treasure' in 2007.Large lathe-turned sculptural relief. art, artwork, vic wood, wood, woodwork, sculptural relief

Loris BUTTON (27/02/1951- ) Born Melbourne Dr Loris Button grew up in Melbourne, completing undergraduate studies in painting and drawing at the Phillip Institute of Technology, followed by a Master of Fine Arts degree at the University of Tasmania. Her PhD thesis employed self portraiture as a means for reflecting on the self, time and ageing in contemporary culture. From 1981 – 1986 Loris lived and studied in Hobart before returning to Melbourne. She lectured at the University of Ballarat Arts Academy from 1987. Since 1990 she has lived and worked in Ballarat and the nearby town of Creswick. Loris retired from an academic career at the Arts Academy, University of Ballarat (now Federation University) at the end of 2010. Loris has continued a post-retirement association with the Arts Academy through her role as an Honorary Research Fellow. Working with prints, paintings and drawings on handmade paper, her work is regularly shown in both solo and group exhibitions throughout Australia and overseas. This item is part of the Federation University Art Collection. The Art Collection features over 2000 works and was listed as a 'Ballarat Treasure' in 2007.Self portrait of artist.art, artwork, loris button, self portrait, alumni, available

Loris BUTTON (27/02/1951- ) Born Melbourne Dr Loris Button grew up in Melbourne, completing undergraduate studies in painting and drawing at the Phillip Institute of Technology, followed by a Master of Fine Arts degree at the University of Tasmania. Her PhD thesis employed self portraiture as a means for reflecting on the self, time and ageing in contemporary culture. From 1981 – 1986 Loris lived and studied in Hobart before returning to Melbourne. She lectured at the University of Ballarat Arts Academy from 1987. Since 1990 she has lived and worked in Ballarat and the nearby town of Creswick. Loris retired from an academic career at the Arts Academy, University of Ballarat (now Federation University) at the end of 2010. Loris has continued a post-retirement association with the Arts Academy through her role as an Honorary Research Fellow. Working with prints, paintings and drawings on handmade paper, her work is regularly shown in both solo and group exhibitions throughout Australia and overseas. This item is part of the Federation University Art Collection. The Art Collection features over 2000 works and was listed as a 'Ballarat Treasure' in 2007.Oil painting on paper depicting a hand holding an egg, mounted on wooden panel.art, artwork, loris button, button, hand, egg, available

Loris BUTTON (27/02/1951- ) Born Melbourne Dr Loris Button grew up in Melbourne, completing undergraduate studies in painting and drawing at the Phillip Institute of Technology, followed by a Master of Fine Arts degree at the University of Tasmania. Her PhD thesis employed self portraiture as a means for reflecting on the self, time and ageing in contemporary culture. From 1981 – 1986 Loris lived and studied in Hobart before returning to Melbourne. She lectured at the University of Ballarat Arts Academy from 1987. Since 1990 she has lived and worked in Ballarat and the nearby town of Creswick. Loris retired from an academic career at the Arts Academy, University of Ballarat (now Federation University) at the end of 2010. Loris has continued a post-retirement association with the Arts Academy through her role as an Honorary Research Fellow. Working with prints, paintings and drawings on handmade paper, her work is regularly shown in both solo and group exhibitions throughout Australia and overseas. This item is part of the Federation University Art Collection. The Art Collection features over 2000 works and was listed as a 'Ballarat Treasure' in 2007.Twenty Five unique state linoprints on handmade abaca and cotton rag papers mounted together with insect pins. This work formed part of the Artist's PhD research.art, artwork, loris button, printmaking, linoprint, doctorate, alumni, handmade paper, linocut

Book - spiral wire bound , clear plastic cover, green title sheet and card back, approx. 110 pages, black and white presentation giving examples of bus tickets along with notes on each system for Melbourne, Country Victoria, Queensland, South Australia, Western Australia, Tasmania, New Zealand (11 systems) and Tourist tramways. Has a table of contents, introduction, a list of the operators (mainly Government), a list of Bus operators Associations and a list of bus publications by the author. Rear page has purchase details of the book and CD, along with a contact address in Sydney. See Reg Item 5579 for the CD. Bob Merchant of the Sydney Tramway Museum advised 4/3/2021 that: Richard Peck, as Curator of Philately, Printing and Postal Technology, was responsible for the Museum of Applied Arts and Sciences acquiring major artefacts from the NSW Government Printing Office when it was forcibly closed by the government in 1989. In retirement Richard has researched the history of private bus routes before 1932 and government bus routes 1932-2021. He maintains a large database of all types of NSW transport tickets.trams, tramways, tickets, reports, melbourne, buses

John Griffin’s wool classing exercise books from 1941-1943 when he was a student at the Gordon Institute in Geelong. John and his father John Henry Griffin owned a farm in Dunkeld and bred fine merino wool. One year they topped the wool sales figures for the area, in the late 1940s. There are four books in total. One book is on the topic of Veterinary Science and is from 1941. It contains information on topics such as birth and early lamb life, bone structure and other internal organisms of a sheep, such as the heart. Another book is on Wool Classing with topics such as wool scouring, dipping, shearing and micron counts. The third book is on general shearing shed knowledge. This includes a diagram for rolling a fleece, correct method for stamping a wool bale and branding abbreviations. The final book is on the History the Merino Sheep. It is a long form essay answer booklet. The Gordon institute and wool are synonymous with one another, the first class in wool sorting was offered at the Gordon in 1891. With much of the wool clip sent directly to England at this time, The Gordon's focus soon shifted to wool classing and marketing. By the 1930s, The Gordon's wool school was renowned as the state's wool industry training centre. Early specialist short courses were offered around Victoria to assist wool growers in preparing their clip for market, with modules on sheep breeding and pasture development included in the programs. Anne Griffin’s, John’s daughter, donated the exercise books to the National Wool Museum in 2021. Book 1 is predominately blue circular cover with cream background. Middle of book has pink highlighter mark. Reverse of book has an Arithmetical Table and a Multiplication Table in a blue ink on cream paper. It also has four black ink markings Book 2 is predominately blue circular cover with cream background. Book has red tape across the spine. Reverse of book has an Arithmetical Table and a Multiplication Table in a blue ink on cream paper. Book 3 is predominately blue plaid cover with cream background. Middle of book has pink highlighter handwriting which has been crossed with the same colour, leaving the text unreadable. Reverse of book has an Arithmetical Table and a Multiplication Table in a blue ink on cream paper. Book 4 is predominately blue diagonal striped book with cream background. Middle of book has small picture of Australia. Reverse of book has an Arithmetical Table and a Multiplication Table in a blue ink on cream paper. Book 1. Front cover: “All Schools” / EXERCISE BOOK / NAME Jack Griffin Grade Gordon Institute School of Technology(?) / Approved by the / Education Department Back cover. Reverse. ARTHMETICAL TABLES / (Numerous, see media) Book 2. Front cover: 2nd & 3rd / “All Schools” / EXERCISE BOOK / Name Jack Griffin / Grade 2 / School the Gordon / Approved by the / Education Department Back cover. Reverse. ARTHMETICAL TABLES / (Numerous, see media) Book 3. Front cover: Embassy / EXERCUSE BOOK / Name John Griffin / Grade 1 / School (?) / APPROVED BY THE EDUCATION DEPARTMENT / Back cover. Reverse. ARTHMETICAL TABLES / (Numerous, see media) Book 4. Front cover: EXERCISE / APPROVED BY EDUCATION DEPT. / BOOK / NAME Jack Griffin / GRADE 3 / SCHOOL Gordon Back cover. Reverse. ARTHMETICAL TABLES / (Numerous, see media) gordon institute geelong, wool classing, 1940s sheep farming, note book, study, student

As part of management standards to adhere to best practice, RVIB went through the certification process to receive ISO accreditation within its offices.1 certificate with signatures and stampCertificate reads "Certificate of Registration. Royal Victorian Institute for the Blind Limited, 557 St Kilda Road Melbourne, VIC 3004 Australia (refer to Schedule of Addresses dated March 20 2003 for additional certified sites) complies with the requirements of AS/NZS ISO 9001:2000 Quality Management Systems Requirements for the following capability: This registration covers the Quality Management System for the provision of case management, production, resources, and support services including education, course development and provision of training, rehabilitation, employment, technology, information and fundraising for people who are blind or vision impaired. The registration also includes the provision of commercial products and services through RVIB Enterprises." Signed: Alex Ezrakhovich, General Manager Certification. Certificate #: QEC12897. Issue Date: 1st April 2003. Certified Date: 29th December 1999. Expiry Date 19th March 2006.royal victorian institute for the blind, registration

Double Headed Rail from Ravenswood Station Siding which was dismantled circa 1987 the two rails were stored for a time at Maldon before being donated to Puffing Billy Museum Bearing makers marks of Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield, North East Derbyshire, England from 1872 - 1883 Double-headed rail In late 1830s Britain, railway lines had a vast range of different patterns. One of the earliest lines to use double-headed rail was the London and Birmingham Railway, which had offered a prize for the best design. This rail was supported by chairs and the head and foot of the rail had the same profile. The supposed advantage was that, when the head became worn, the rail could be turned over and re-used. In practice, this form of recycling was not very successful as the chair caused dents in the lower surface, and double-headed rail evolved into bullhead rail in which the head was more substantial than the foot. Info from Wikipedia - Rail Profile https://en.wikipedia.org/wiki/Rail_profile The first records of double headed rail being used In Victoria by Victorian Railways was in 1859, the rails, chairs, oak and trenails were imported from UK. After the 1870’s the Victorian Railways went over to using flat bottom rails, but they still needed replacement double headed rail for lines already laid and this continued up to at least 1883 Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield England from 1872 - 1883 Mount Alexander & Murray River Railway The Melbourne, Mount Alexander & Murray River Railway Company received parliamentary assent in February 1853 to build Victoria's first inland railway from Melbourne to Williamstown, and Melbourne to Bendigo and Echuca. Construction commenced in January 1854 with work on a pier at Williamstown but lack of funds slowed progress, eventually prompting the company to sell out to the government. The 100-mile (162 km) section to Bendigo opened in October 1862. Its cost of £35,000 per mile made it the most expensive railway ever built in Australia. In 1864, the line was extended to Echuca, tapping into the booming Murray-Darling paddlesteamer trade. info from Museums Victoria - Victorian Railways https://museumsvictoria.com.au/railways/theme.aspx?lvl=3&IRN=450&gall=456 1863 Ravenswood Station open on the 1st Feb 1863 Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Ravenswood Siding When the Victorian Railways were established in 1856 they adopted one of the popular British permanent way standards - heavy 80lb (36.3kg) double-headed rail held up right in cast iron chairs attached to transverse timber sleepers by wooden pegs called trenails. The Ravenswood Railway siding was constructed in 1862 with 12 feet wrought iron double-head rail held in cast iron chairs with Ransom and May patent compressed keys. Trenails held the chairs to the sleepers and the joints were secured in joint chairs. Joints were subsequently joined using fish plates. It formed part of the Melbourne to Echuca rail line, initially known as the Melbourne, Mt Alexander and Murray River Railway. George Christian Derbyshire, the first Engineer-in-Chair of the Victorian Railways was responsible for the design and construction of the works. No new lines were built in Victoria using double-headed rail after 1870. The siding was disconnected from the main line in 1988. The Ravenswood Railway Siding demonstrates the original 1856 philosophy of the Victorian Railways to adopt British permanent way technology. The siding demonstrates significant aspects in the development of permanent way technology in England and Victoria over the period from the 1830's to the 1880's. The chairs in the Ravenswood siding are physical evidence of early railway technology rendered obsolete 120 years ago, namely joint chairs at rail joints and trenails to secure the chairs to the sleepers. The double-headed rail demonstrates an important stage in the evolution of British rail technology in the 1830s. The old fish plates, square headed bolts and square nuts demonstrate the success of fishing the rail joins. The Ravenswood siding demonstrates the earliest form of rail joint technology developed in England, and existing in Australia, the joint chair. In part of the siding the sequence of joint and intermediate chairs is consistent with the 1856 specifications, that sequence is rare with the joints secured in joint chairs. The survival of chairs in this sequence is rare and almost certainly demonstrates that they remained in continuous use at the same location from 1862 to 1988. This remnant of the Ravenswood siding has survived 126 years. The siding has proved to be the most significant of extant remnant double-headed sidings in Victoria, containing a rare combination of early permanent way technologies. Construction dates 1862, Info from Ravenswood Railway Siding Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/4693/download-report The remaining section of this siding is significant at the State and National levels in that it demonstrates the use of chaired rail by the Victorian Railways Department for the Trunk Lines and, more particularly, the following stages in the evolution of this long obsolete method of permanent way construction: a) The use of joint chairs and intermediate chairs at regular intervals inferring that the original wrought iron rail lengths were 12 feet, as is known through documentary sources to have been the case. The survival of chairs in this sequence is unique and almost certainly demonstrates that they have remained in continuous use at the same location and in the same sequence from 1862 to 1988 . b) The use of joint chairs and intermediate chairs designed for use with trenails. c) The use of later intermediate chairs designed for use with steel pins and the use of fished joints with steel double head chaired rail, representing a second method of constructing the permanent way using chaired rail technology. info from Ravenswood Siding - Melbourne/Echuca Railway Line - Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/70103/download-report Addition to Citation for Melbourne to EchucaRailway Line 1/10/1990 Double Head Rail The surviving lengths of double head rail with chairs on this railway compare with one surviving similar remnant on the Geelong to Ballarat railway and are representative of permanent way construction techniques applied exclusively to the two trunk railways of the 1860's. In this respect they are rare survivors and may be unique at the national level and of technical importance at the international level to the extent that they enhance contemporary understanding of early railway building technology. Surviving lengths of chaired double head rail survive at Kyneton, Ravenswood and Bendigo on this railway and include a number of different types of cast iron intermediate and joint chairs with hardwood keys and metal pins. The Ravenswood siding is of special significance for the diversity of chair types and for the sequence of chairs recalling rail lengths known to be associated with construction of the line in 1862. Construction of the Railway Tenders closed on 24 March 1858 with no less than 133 tenders being received. A contract was let to Cornish and Bruce for £3,356,937 to commence work on 1 June 1858 and complete the line by 31 July 1861. Cornish and Bruce made quick early progress with the Melbourne to Sunbury section being officially opened on 13 January 1859. The line was officially opened to Bendigo (Sandhurst) on 20 October 1862 by the Governor of Victoria, Sir Henry Barkly. A great banquet was held for 800 guests and this was followed by a grand ball. The extension of the line to Echuca was a relatively simple matter as that part of the line was across plain country without any significant engineering challenges. Tenders were called for the work in 1863 and the work was completed in 1864 by contractors Collier and Barry Apart from the line contractors, other firms directly involved were J Shire law and Co (sleepers), R Fulton, Langlands Brothers and Co, William Crossley (water supply), B Moreland, Langlands Brothers and Co (platelayers lorries), E Chambers (iron pins, traversers), Miller and McQuinstan (luggage vans and steam engines) and various contractors for building works. Info from Engineers Australia Engineering Heritage Victoria Nomination for Recognition under the Engineering Heritage Australia Heritage Recognition Program for the Goldfields Railways - Melbourne , Bendigo & Echuca Railway Page 25 - .2.9.2 Statement from National Trust of Australia (Victoria) Listing number B5323 for Mt Alexander/Murray Valley Rail Line: Page 69 - Theme 3 https://www.engineersaustralia.org.au/portal/system/files/engineering-heritage-australia/nomination-title/Melbourne_%20Bendigo_Echuca%20Railway%20Nomination.pdf The Melbourne, Mount Alexander and Murray River Railway Company was a railway company in Victoria, Australia. It was established on 8 February 1853 to build a railway from Melbourne to Echuca on the Victorian-NSW border and a branch railway to Williamstown. The company struggled to make any progress and on 23 May 1856, the colonial Government took over the Company and it became part of the newly established Department of Railways, part of the Board of Land and Works. The Department of Railways became Victorian Railways in 1859. Construction of the Bendigo line commenced in 1858, but this private consortium also met with financial difficulties when it was unable to raise sufficient funds, and was bought out by the Victorian colonial government. The design work was then taken over by Captain Andrew Clarke, R. E., Surveyor-General of Victoria, with bridge designs completed by Bryson and O'Hara The contract for the first stage of the line from Footscray to Sandhurst (now Bendigo), was let to Cornish and Bruce for £3,356,937.2s.2d ($6.714 million) with work commencing on 1 June 1858. Completion of the permanent way was to be by 31 July 1861 https://en.wikipedia.org/wiki/Melbourne,_Mount_Alexander_and_Murray_River_Railway_Company Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Victorian Railways : report of the Board of Land and Works November 1862 GP V 1862/63 no. 21 (2.8 MB) https://www.parliament.vic.gov.au/papers/govpub/VPARL1862-63No21.pdfHistoric - Victorian Railways - Double Headed rail Ravenswood Railway Station and Siding Victorian Heritage Database Reports Victorian Heritage Register VHR H1100 Victorian Heritage Register VHR H1786 National Trust VHR H1100 Mount Alexander and Murray River Rail way Line National Trust2 rail lengths of Double Headed Rail made of Iron makers marks : Wilson & Cammell - Dronfield - Steel and 20 joint chairs with metal rail pins Makers mark Wilson & Cammell - Dronfield - Steel (possible date 187? very hard to read ) puffing billy, double headed rail, wilson & cammell - dronfield - steel works, ravenswood station siding, melbourne to echuca rail line, initially known as the melbourne, mt alexander and murray river railway.

This image shows a semi-aerial view of a property along a river adjacent to Beechworth in approximately 1900. The photographer has capitalised words in the label, indicating that 'The Precipice' may have suggested a particular rather than a general vantage point to local people at the time. Although the exact location of the photograph is yet to be determined, Beechworth Gorge is popular today with hikers and nearby Mt Stanley is noted for its views. Lantern slides, sometimes called 'magic lantern' slides, are glass plates on which an image has been secured for the purpose of projection. Glass slides were etched or hand-painted for this purpose from the Eighteenth Century but the process became more popular and accessible to the public with the development of photographic-emulsion slides used with a 'Magic Lantern' device in the mid-Nineteenth Century. Photographic lantern slides comprise a double-negative emulsion layer (forming a positive image) between thin glass plates that are bound together. A number of processes existed to form and bind the emulsion layer to the base plate, including the albumen, wet plate collodion, gelatine dry plate and woodburytype techniques. Lantern slides and magic lantern technologies are seen as foundational precursors to the development of modern photography and film-making techniques.This glass slide is significant because it provides insight into Beechworth's built environment and natural landscape in the early Twentieth Century, around the time of Australia's Federation. It is also an example of an early photographic and film-making technology in use in regional Victoria in the time period.Thin translucent sheet of glass with a square image printed on the front and framed in a black backing. It is held together by metals strips to secure the edges of the slide.Obverse: Image from The Precipice. /burke museum, beechworth, lantern slide, slide, glass slide, plate, burke museum collection, photograph, monochrome, views, landscapes, farmsteads, rivers, beechworth gorge, mt stanley, emulsion, the precipice

Two short sections of flooring cut for distribution during Deakin Universities ‘Open Day’ in December 1994. This was during the conversion of Dalgety Wool Store to Deakin University’s Woolstore Campus. These small pieces of timber are part of Geelong’s history and were salvaged from the Dalgety Woolstores during the renovations. Hundred of meters of ironbark, red gum, pine and other timbers, some more than a century old, were reclaimed from the site and have been recycled as furniture and featured building materials for the woolstore campus. The old brick stores, located on a formerly neglected section of the Corio Bay shoreline, now house the administration and chancellery, architecture and building schools, information technology services, the student union, a cafeteria and, as the focal facility, a Great Hall seating 1500 people and acoustically tuned for symphony orchestras. The refit was developed from the existing grid of substantial timber columns and beams extending over 52,000 square metres. This framework was filled with lightweight panels to enclose workplaces and removed in some parts to establish courtyards, atriums and streets. The brick facades were redefined with new doors and double-glazed windows in proportion to original fenestration. Bright colours and industrial finishes identify the new insertions.Square sections of redgum lumber cut into floorboards. The sides of the lumber have a grove cut on one side and a matching section to fit within this groove on the other side. This has been done to ensure the floorboards have a tight and consistent fit with one another. The bottom of the lumber also has an additional grove running through the middle of the redgum. On top, one of the sections of lumber has three nail holes, which travel all the way through to the bottom of the wood.deakin university, dalgety wool store, red gum

Ash KEATING Among fifteen finalists this artwork won the 2012 Guirguis New Art Prize, a prestigious national acquisitive biennial art prize administered by Federation University Australia. The Guirguis New Art Prize (GNAP) is a national acquisitive $20,000 contemporary art prize which presents a selection of Australia's most exciting contemporary artists with works that explore and embrace new ways of artistic expression, utilising existing mediums and new technologies in innovative ways. Initiated and generously supported by local Ballarat surgeon Mr Mark Guirguis, this prestigious art prize is administered by the Federation University Australia (FedUni). As a local philanthropist and art collector, in developing the Prize, Mark Guirguis' aims were to celebrate the significance of the arts to communities and to Ballarat, emphasising contemporary art and 'living' culture, and to highlight FedUni's Arts Academy. Artist Ash Keating works across a conceptual, site-responsive and often collaborative art practice that incorporates painting, sculpture, installation, video, performance and public interventions, and has referenced a wide range of social and environmental issues within his art. Frequently working beyond the gallery, and often harnessing community narrative and energy, his work also draws upon myth, ritual and ceremony. 'West Park Proposition', 2012, is a three channel and screen video installation, utilising multiple camera video documentation of an endurance painting intervention undertaken on the morning of 01 September 2012 on the east facing wall of a newly built tilt-slab industrial building, situated on the direct edge of the current urban and rural boundary in Truganina, Victoria. The multi-screen work documents an endurance guerilla-style action painting intervention and ritualised painting performance in which a symbolic violence is enacted against a storehouse of commodity production and consumption. Upon winning the award artists Ash Keating said; “The work was made near Ballarat on the Deer Park bypass. It is an aesthetic comment about the way these new tilt-slab industrial buildings spring up without caring for the environment." The work, which took eight hours to create, was about reclaiming the space from “cost-effective architecture” without any aesthetics. The inaugural judge for the Prize, Jason Smith, Director, Heide Museum of Modern Art (MoMA) said, "Selecting the winner of this inaugural GNAP was exhilarating and excruciating: exhilarating because the seriousness of each artist's enterprise, and their uncompromising resolution of concepts, has created an inaugural exhibition of exceptional power. This first GNAP is a survey of some of the most poetic and provocative imaginations working in Australia today. Selecting one winner from such a show in which each of these artists has in some way transformed my thinking about the world was the excruciating part. Ash Keating's work West Park Proposition, 2012 kept drawing me back in the several hours I spent viewing the works. It simultaneously affirms the political and critical role of the artist as a key agent of change and action, and someone who reminds us of the beauty and resilience of humanity and nature in the face of unrelenting change. As a work combining performance, collaboration and hope, Keating's West Park Proposition is a work of immense and compelling poetry."artist, artwork, keating, ash keating, guirguis, guirguis new art prize, gnap, gnap13

Bruce ANDERSON (20 August 1950- Born Surry Hills, Melbourne, Victoria In 1971 Bruce Anderson obtained a Diploma of Art (Sculpture) from the Prahran Institute of Technology. For the next two years, he worked at Raynham Ceramics in East Bentleigh, making slipcast ware. After a year of National Service, he completed a teacher education course at the State College of Victoria, Auburn and taught for a time in the secondary school system. In 1977, he moved to Queensland to take up a position as Head of the Ceramics Department at Townsville TAFE. In 1984, he relocated to the Darling Downs Institute in Toowoomba and was still teaching there in his entry in the 1986-7 directory, working in raku and blackware fired with gas in a ceramic fibre kiln. During 1986, he moved to Adelaide to take up a position as senior lecturer in ceramics at the South Australian School of Design. During the late 1980s and 1990s, he began to make sculptural works of architactural form cast from a mixture of terracotta clay and refractory concrete. Part-glazed, the works allude to primitive industry and utilitarianism. In 1984 Bruce Anderson was a guest at Spotkanie held at the Gippsland Institute of Advanced Education.Raku teapot with tall handle. bruce anderson, ceramics, jan feder memorial ceramics collection, gippsland campus, teapot, raynham ceramics

A press release from Melbourne Legacy in 1975 which relates a story of how Legacy works. The information was intended to be used by press and magazines etc. The title 'A high flier' is about 'Bill' a young 13 year old boy who lived with his mother, a widow, and 10 other children in poor surroundings. Legacy was able to organise assistance from War Service Homes to give them a chance of a home of their own. Legacy helped in the usual way, with educational expenses, school uniforms, and other school expenses. Bill achieved his leaving certificate, then matriculated and gained a Commonwealth scholarship. He chose to do Aeronautical Engineering at Melbourne University and Legacy provided a spot for him at Blamey House where he could live close to his studies. He went on to complete his studies at University of Sydney and helped by a research scholarship also the Imperial College of Science and Technology in London, then commenced a post-graduate PhD studies in Aerodynamics. He became a Research Lecturer at the Imperial College. The final paragraph mentions 'Bill is now nearly 30 and is on the threshold of a rewarding life, contributing to man's knowledge of aerodynamics and Legatees have repaid a debt to his father, one of their comrades.'A record of how Legacy promoted their work in the 1970s.Blue foolscap page x 2 with black type of a press release in 1975.Title 'A high flier'press release, case studies

This is a set of four photographs of WO2 Graham Ragless from the Royal Australian Survey Corps demonstrating the operation of Global Positioning System equipment in c1988. The photos were probably taken at the School of Military Survey (SMS), Bonegilla, VIC. Texas Instruments TI4100 portable Global Positioning System (GPS) geodetic receivers were introduced from 1986–1988. The GPS receivers and Ferranti FILS3 helicopter and vehicle mounted Inertial Positioning System (IPS) replaced the TRANSIT satellite receivers. The equipment was deployed to establish the baseline for a GPS controlled air camera and photogrammetric system to significantly reduce the requirement for ground survey to accurately control air photography for topographic mapping. Personnel from the four field survey squadrons at this time were trained at the SMS to operate the TI4100 receivers. Field survey operations using GPS and IPS equipment followed in the late 1980s. This technology is described in more detail in the RA Svy booklet titled An Introduction to Topographic Mapping. See record ID - 6010. WO2 Graham Ragless progressed to the rank of WO1 and was appointed as RSM of the Army Survey Regiment from 1990 to 1992. Refer to item 6186.2P for more photographs of WO2 Graham Ragless demonstrating the TI4100.This is a set of four photographs of a technician from the Royal Australian Survey Corps demonstrating the operation of Global Positioning System equipment in c1988. Colour photos are on 35mm slide film and were scanned at 96 dpi. .1) to .4) - Photo, colour, c1988, WO2 Graham Ragless demonstrating the operation of a TI4100 GPS receiverThere are no annotations.royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, surveying

This is a set of two photographs of WO2 Graham Ragless from the Royal Australian Survey Corps demonstrating the operation of Global Positioning System equipment in c1988. The photos were probably taken at the School of Military Survey (SMS), Bonegilla, VIC. Texas Instruments TI4100 portable Global Positioning System (GPS) geodetic receivers were introduced from 1986–1988. The GPS receivers and Ferranti FILS3 helicopter and vehicle mounted Inertial Positioning System (IPS) replaced the TRANSIT satellite receivers. The equipment was deployed to establish the baseline for a GPS controlled air camera and photogrammetric system to significantly reduce the requirement for ground survey to accurately control air photography for topographic mapping. Personnel from the four field survey squadrons at this time were trained at the SMS to operate the TI4100 receivers. Field survey operations using GPS and IPS equipment followed in the late 1980s. This technology is described in more detail in the RA Svy booklet titled An Introduction to Topographic Mapping. See record ID - 6010. WO2 Graham Ragless progressed to the rank of WO1 and was appointed as RSM of the Army Survey Regiment from 1990 to 1992. Refer to item 6226.4P for more photographs of WO2 Graham Ragless demonstrating the TI4100.This is a set of two photographs of a technician from the Royal Australian Survey Corps demonstrating the operation of Global Positioning System equipment in c1988. Colour photos are on 35mm slide film and were scanned at 96 dpi. .1) and .2) - Photo, colour, c1988, WO2 Graham Ragless demonstrating the operation of a TI4100 GPS receiverThere are no annotations.royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, surveying

Otto Schott, a chemist and glass engineer, had the vision of uniform production ie making glass items that would resemble one another. At the end of the eighteenth century, with most glass items still created by hand, the quality of output was still a guessing game. Schott was the first to render this an industrial certainty. 1884 Otto Schott, Ernst Abbe and Carl and Roderich Zeiss found the Schott & Associates Glass Technology Laboratory in Jena, Germany. Glastechnisches Laboratorium Schott & Gen was born. Production started in 1886. Original products included optical and thermometer glasses. The following year, a crucial discovery was made: borosilicate, a heat and chemically resistant glass. By it’s 25th year anniversary, the company had grown from an experimental glass factory into an internationally renowned manufacturer of optical and industrial glasses. Soon to be added was fiolax, tube-shaped glass used for vials, ampoules and syringes thus allowing the company to play a significant role in supplying Europe's nascent pharmaceutical industry. Post WW2 USA Army opens new factory in Mainz, West Germany and factory in Jena , East Germany taken over by the DDR State both using same trade name. Legal action for 30 years resolved in 1980 - split name. Berlin Wall 1989, Factories reunited 1991A pharmaceutical clear glass beaker with graduation 100ml -300ml DURAN 50Front : DURAN 50 / SCHOTT & GEN / MAINZ / JENA (ER) GLAS 300 Back : PYREX 300pharmacy, medications, medicines, glass manufacturing, glass works, early settlers, moorabbin, bentleigh, cheltenham, jenaer glaswerk schott & gen company, west germany, east germany, berlin wall, ww2 1939-45, schott otto, zeiss roderich

For about 40 years the corner of Hargraves and Williamson Streets in Bendigo in rural Victoria had been known for its arresting aroma. From a hole in a window wafted the smell of Gillies Brothers' meat pies.The Gillies window, along with the nearby Shamrock Hotel, ANZ Bank and Post Office, was one of the delights of Bendigo and proof that mass-produced food can still be delicious. Gillies went from strength to strength, surviving listing on the second board and a handover to a younger generation of managers.Gillies had three factories, 10 shops in rural Victoria and Melbourne. Les Gillies, one of three brothers who founded the baking business after the difficult drought years preceding 1950, admits that the company has not always been run along the most modern business methods. Change began with the preparation of a business plan subsidised by the Victorian Department of Industry, Technology and Resources in 1974. Prepared by Cruickshanks, the plan formed the basis of the company's float on the second board. Capital expanded to $4.4 million. In 1988, a second plan was produced by Chris Mason and Associates covering business, marketing, computer utilisation and human resources. This factory for Gillies pies originally opened in the 1950s, but has sadly been closed and abandoned since about 2006.CD Gillies History Photos containig 11 photos of shops, staff and factories in Bendigo.bendigo, business, gillies bros, gillies pies

Bryan TRUEMAN (13 November 1941- ) Born Derbyshire, England worked in Australia 1975–1992 Bryan Trueman studied at Blackpool School of Art in 1962, undertaking Postgraduate studies at Manchester College of Art in 1963. He toured the east coast of America in 1967-8, then returned to England where he started to train himself in Ceramics. Migrating to Australia in 1975 Bryan Trueman lectured at Caulfield Institute of Technology, Melbourne. In 1982 he opened a studio in Warrandyte, Victoria. Bryan Trueman was a visiting lecturer to the Gippsland Institute of Advanced Education c1982. He is particularly well-known for his painterly use of glazes to depict the Australian landscape, using the platter as the base form. Bryan Trueman was a visiting lecturer to the Gippsland Centre for Art and Design in 1982. This work is part of the Jan Feder Memorial Ceramics Collection. Jan Feder was an alumna of the Gippsland Campus who studied ceramics on the campus. She passed away in the mid 1980s. Her student peers raised funds to buy ceramic works in her memory. They bought works from visiting lecturers who became leading ceramic artists around the world, as well as from many of the staff who taught there. Wheel thrown stoneware platter, with colourful landscape glaze.Bryan Trueman Aug '82ceramics, bryan trueman, gippsland campus, artists, artwork, jan feder memorial ceramics collection, landscape