White Porcelain “Made in Occupied Japan” electrical insulators. Insulators can be dated from September 1945 to April 1952 during the allied occupation of post WWII Japan. Pin insulators were manufactured specifically for Australian export. Pin insulators are made of non-conductive porcelain and were used to create a barrier between outer wrapped suspended wiring and threaded wood or metal dowel. Pin insulators such these have been found on utility poles around Australia.Porcelain insulators stamped with “Made in Occupied Japan” are often viewed with much interest by collectors given their connection to WWII and short seven year manufacturing time span. Pin insulators such as these are an example of Australia’s continued electronic development which began in the late 19th century. Collection of seven white porcelain insulators made in Occupied Japan. Insulators are cylindrical in shape, with indentation at top. The indentation creates a flat mushroom top head. Insulators display a manufacturer stamp at the bottom of the cylinder. Insulators are single walled and hollow inside with threading at the enclosed top end. flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, insulators, porcelain, electrical insulators, occupied japan

In the 19thC and early 20thC men often wore their shirts for a week or more. However the collars were detachable so that they could be changed when they became dirty or for special occasions eg Church on Sundays Collar studs were used to attach the collar to the shirt. The cardboard box was used for storage and when travelling. The collars were very stiffly starched so as to maintain their shape. Some have Laundry instructions printed on the inside of the collar.The Maggs family were pioneer settlers in Moorabbin Shire.12 detachable, stiffly starched, white collars, from various manufacturers, for a man's shirt. Each Collar has 3 buttonholes for attaching to the shirt - 2 at the neck and 1 centre back. They have been stored in a cardboard box marked 'Boheco regd. ' The box has no lid.Base of Box : Boheco REG. SNOW-WHITE COLLARS / 1 3/4 / Strand / 16 1/2 / MADE IN / AUSTRALIA ( there is no lid ) under box in pencil ; 16 1/2 x 1 3/4 / 1/- each / c/o = Doz. 1 / 3 eachmenswear, clothing, shirts, collars, early settlers, fashion, cheltenham, moorabbin, dairy farmers, market gardeners, maggs family, pioneers

Menu for soft drink industry dinner held at Wangaratta 24th September 1968. Cream coloured cover with black type face and crest of Cohn soft drink manufacturers. The dinner was held at the Pinsent Hotel, Reid St. to celebrate the opening of the new Cohn factory and office blockCohn Brothersorganization, business, cohn bros. limited, cohn brothers wangaratta, pinsent hotel, reid st.

Boy with a Thorn Though the classical bronze that the figure was modeled has become known as Lo Spinario, both Stuart Rattle and Kevin O’Neill referred to it as The Boy with a Thorn. Information from the late Stuart Rattle and John Graham, the late Kevin O’Neill’s partner. The statue was bought by Kevin O’Neill from a South Yarra antique dealer in the 1980s. She had bought it in Europe. Stuart believed that it was cast in Berlin by Moritz Geiss who had pioneered the popular process of zinc casting of classical statues. Schinkel, the architect of early 19th Century Prussian public buildings used the process extensively. I assume that the decorations that can be seen in Berlin currently are copies of those copies, given the comprehensive destruction of the city in 1945. Unless there is a date stamped on the statue, and there might well be, there is no firm indication of its age, although Stuart and Kevin believed it was “turn of the century”. It was given to Stuart by John Graham after the death of Kevin O’Neill. Prior to its installation at Musk Farm, it was “by the dam” at Marnarnie, O’Neill’s property at Mt Macedon. It became a much photographed focal point in the sunken garden at Musk Farm. The statue is a gift from the Rattle family to The Friends of Wombat Hill Botanic Gardens who intend to give it, in turn, to Hepburn Shire to be placed in the Botanic Gardens. Both the family and the Friends see it as a memorial to Stuart’s tireless work to raise funds for the Gardens and to raise the profile of the Gardens so that their considerable significance could be more broadly acknowledged. The CMP notes that statuary has been a feature of most botanic gardens (and a notable feature of the Ballarat Botanical Gardens) and James Lowe, the head of Parks for the Shire has also commented that it is an area that could well be developed in the Gardens. This comes from his attendance at meetings of the BGANZ, the “peak professional body” for the development and maintenance of registered botanic gardens in Aus and NZ. Given the lack of funds that the Shire has been able to allocate to the Gardens, a donation of this calibre is a welcome addition to the cultural asset that the Gardens represent. A very large number of residents of the Shire are members of the Friends, have visited Musk Farm and are appreciative of the Gardens. There is a current feeling that the Gardens are undergoing a dynamic revival as a result of the success of the Café and also because of the extraordinary improvement and enhancement of the amenity that has been undertaken over the past two years by the Friends. The installation of the Boy with the Thorn is another move forward for the Gardens. The statue is cast zinc. It is sometimes referred to a white bronze. As can be seen in the photographs, it is in very good condition with no damage or apparent degeneration of the metal. The Smithsonian Institution has a lengthy document relating to the deterioration and repair of similar casts in the US where urban pollution has taken its toll but for the most part it deals with inappropriate repair rather than maintenance protocols. One of the properties of zinc that is appreciated in Australia is its ability to withstand the elements and given that the artwork has been either on Mt Macedon or at Musk for the last 30 years or more, its relocation to Wombat Hill seems to be an appropriate one. The Friends are prepared to organise and pay for the relocation of the statue. The issue of security from the point of view of theft, malicious damage and environmental impact will need to be addressed. The Ballarat Botanical Gardens have recently reinstalled statuary which has been damaged and which had been removed from the Gardens on account of this. They have used Rockworks Ballarat and Wilson’s Memorials to make plinths, secure artworks with steel pins and to provide especially robust fixings to ensure the safety of the various sculptures. The CMP (2007) makes a number of recommendations regarding security in the Gardens ranging from the installation of lighting to the locking of the gates overnight and the repair/reinstatement of appropriate fencing – not done as yet to my knowledge. Paul Bangay has also agreed to act as a consultant in the process of installing the Boy. John Graham estimates its value at $20,000 The preferred location for the work would be at the entrance to the Fernery from the lawn. The paths form an intersection at that point that could be modified to fit the statue. But this is currently a suggested location only. The statue is a gift from the Rattle family to The Friends of Wombat Hill Botanic Gardens who have gifted it to the Hepburn Shire to be placed in the Botanic Gardens. Both the family and the Friends of the Wombat Hill Botanical Gardens Daylesford see it as a memorial to Stuart’s tireless work to raise funds for the Gardens and to raise the profile of the Gardens so that their considerable significance could be more broadly acknowledged. Lo Spinario (Boy with a thorn) c. 1900 copy after the Greco-Roman Hellenistic antique bronze in Rome. c. 1900 copy after the Greco-Roman Hellenistic antique bronze in Rome (Palazzo dei Conservatori, Musei Capitolini, Rome) Manufacturer M. Geiss, Berlin Nonedaylesford, wombat hill botanical gardens, stuart rattle, kevin o'neill, john graham, boy with a thorn, lo spinario, classical sculpture, zinc, classical nude, hepburn shire, public art, sculpture, art

Used to provide the SECV logo or Monogram onto doors, windows or vehicles used by the SEC. Ten copies held. See item 8548 for the large logo and 9652 for a small size logo. This version does not have "1921" on the bottom of the logo or emblem. One copy placed on a clear sheet of plastic with some difficulty after soaking and transferring. Some very small air bubbles remain.Demonstrates the method of providing the SECV logoSECV logo, monogram or decal, glued transfer adhered to a sheet of paper with manufacturers name (Selex Decal) on one side. Two sizes held - 170 x 127 - Selex Decal No. 02691736 and 206 x 132 - No. 12694017. 9653.3 - logo placed on a clear A4 sheet.secv, signs, logos, monogrames, selex decal, emblems

Set of two digital images of Metrovickers 101 or MV101 tram motors. The first image shows the motor complete with gear cases and axle bearing caps, while the second shows the motor without the axle bearing caps. Have the manufacturer's logo in the bottom right hand corner.trams, tramways, metrovickers, motors, electrical equipment, mv101

Manufactured for the Hawthorn Tramways Trust for use on Uniform Jackets and Great Coats. Demonstrates a button made for the HTT Set of four Coat buttons for the Hawthorn Tramways Trust - HTT - made by Stokes and Sons Melbourne. The badge backing piece is brass. It is fitted with a lug for sewing onto a jacket and has the name of the manufacturer stamped on the rear part. See item 581 for another example, smaller in diameter. tramways, trams, badges, uniforms, hawthorn, htt, buttons

Cardigan - garment part of a Women's service dress uniform. Item issued to "BALAAM" Service No. F320519". Refer also Cat. No. 6916.Cardigan - dark green colour, wool blend ribbed knitwear with front edges and collar. Five button holes, no buttons. Pale green colour rank insignia sewn each upper arm. Two manufacturers labels - inside collar - white cotton fabric with handwritten information.First label - "BROMLEY K/W/ ^ 1981/ DSN 8410-66-097-7813/ SIZE 14/ SERVICE NO./ NAME" Second label - detail cleaning instructions under the headings "Machine wash" and "Hand Wash". Handwritten information - black ink pen. "F3205719/BALAAM".uniform, cardigan, army, balaam, passchendaele barracks trust

Slim Bound Wages Ledger Book, Dark Green Cover, for perriod 1939-1948. Only a sample of pages scanned. Includes loose copies of "Rates of Weekly Installment Deductions" from Commonwealth of Australia Taxation Office and Victorian Chamber of Manufacturers for 1947, 1951,1952 and 1953 (Not scanned)

The glass phial contained liquid ethyl chloride, little pressure being required to liquefy the gas at room temperature. By directing the nozzle downwards at the skin or mucous membrane to be analgesed, a stream of liquid squirts out, vaporising on contact, thus producing transient local temperatures of approximately -10 qc. Ether's unpleasant smell agitated patients. Ethyl chloride's pleasant odour reduced agitation. It could be used for induction and worked quickly without irritating respiratory passages. Ethyl chloride spray could also be used as a local anaesthetic. Faded rectangular burgundy box containing a glass phial with metal and rubber lid that forms a spray nozzle. The lid of the box had a mustard coloured manufacturer's label wtih burgundy writing. The phial has a discoloured white label with red writing and a blue label with white writing.Printed in white ink on blue label: IMPORTANT / NOT DESTROY THIS TUBE, IT CAN / BE REFILLED FOR / 2/10bengue & co. ltd., london, ethyl chloride, 1900, local anaesthesia

Part of the Reverend Chaplain Major Thomas Bruce Williams, No 556101, Collection.Detachable light green coloured padded coat liner with long sleeves. Liner has buttons holes on neck, front and sleeve bottom for attaching to a coat. Dark green piping on edges. Open vents under arms. Khaki manufacturer's labels sewn onto inside back.army chaplain, major thomas b. williams, uniform

A 52 playing card set with moon type designed by the leading firm of playing card manufacturers in England during this period - Thomas de la Rue & Company. Playing cards with red, black and white design with moon type at top left-hand and bottom right-hand corners in orange metal hinged box. recreation, games

The Paragon China Company was a British manufacturer of bone china from 1919 to 1960, based in Longton, Stoke-on-Trent, and more recently part of the Royal Doulton group.Green display wall plate with multicoloured central floral design and gold patterned fluted edge.plates, china

This piece bears an export mark associated with Arnart Imports. Arnart was an importer and distributor, rather than a manufacturer. It is likely that this is a Pucci porcelain piece, distibuted and sold by Arnart.Porcelain figurine of a male doctor holding a newborn baby. The figure has grey hair and is wearing an unbuttoned white surgical gown. Beneath the gown the figure is wearing brown, striped trousers, a blue shirt, a red tie and black shoes. The buttons on the shirt and his belt buckle are golden coloured. The figure is wearing gold framed glasses with round frames, and is smiling. The figure is standing with his left hand in the pocket of his surgical coat, while holding a baby in his right hand by its left leg. The baby is head down and facing away from the doctor figure. The figurine is standing on a oval shaped base and there is a gold coloured, abstract, decorative embellishment at the front of the base. There is a stamp on the underside of the base of the figurine consisting of the initial 'A' below a stylised crown. The number '44/768' is printed on the base below this stamp. A retail sale tag is tied to the right arm of the doctor figure with a small piece of orange ribbon. The tag reads 'TREASURES/TODAY/HEIRLOOMS/TOMORROW'.

Tram has route No. 96 and destination of City. No manufacturer details. Possibly made by the TMSV as a sales item. See item 4216 for the same item as a lapel badge. Demonstrates a key ring with a Z1 class tram badge.Key Ring - relief of Melbourne Z1 class tram No. 99, with gold and brown enamel painted areas, and fitted with a flexible lead and locking key ring. badges, z1 class, tram 99, key ring, route 96, souvenirs

By 1900 Marshall & Company was the largest shoe & boot manufacturer in Australia producing 12,000 pieces of footwear weekly. A fire in1901 gutted the building and the company moved to Richmond. Faded photograph of the three-story building belonging to the Marshall Manufacturing Company which was established in Port Melbourne in 1888. It employed some 300 workers until destroyed by fire in 1901.industry - manufacturing, marshall & co manufacturers

This item has applications in teaching Physics and Chemistry - obtaining information about the atomic structure of the light-emitting substance. An optical instrument that employed a monochromatic light source, a prism (missing), and viewing lenses mounted in a tube that can be in any radial position with respect to the vertical axis of the prism. House in a polished timber carry box.Manufacturers' and suppliers names stamped on the vernier disc: "Made by W. & J. George Ltd, Birmingham, England" and "For H.B. SELBY & Co, SYDNEY & MELBOURNE. No 266"scientific instruments, surveying, microscope, physics, chemistry, atomic structure, spectroscope

Unframed black and white photograph of a long weatherboard building with verandas across much of the front.Printed below photograph: "Viticultural College Rutherglen" On message side of postcard: "Secretary, Soldiers' Fathers' Assn., Manufacturers' Building, 312 Flinders St., Melbourne."viticultural college

Beret Black wool with cotton band and cotton tightening enclosed in edging band.Manufacturer's Label - Beret Mrfro Pty Ltd Victoria Australia Size 6-7/8; Name tag Regimental Number 318285 Name: Schwerdfergercavalry, beret, black beret

Unopened industrial sized reel of white cotton with labels attached to top, side and bottom.Manufacturers of High Grade Sewing Thread for all trades including specially prepared 3 and 4 cord for use in boot, shoes, slipper and clothing trades.

An Head 'Tournament Director' tennis racquet (1) with vinyl cover (2). Racquet features: aluminium frame with twin shaft; plastic bridge and butt cap; brown leather handle grip; and 'Graphite 6' netting. Manufacturer's name features on a badge adhered onto base of bridge, and, also across butt cap. Model name features along outer left shaft. Manufacturer and model name features across obverse of cover. AMF-Head logo and emblem feature across reverse of cover, and on metal zipper grip. Materials: Metal, Graphite, Leather, Plastic, Adhesive tape, Paint, Ink, Paper, Vinyl, Ink, Metaltennis

Two part object. (1) A Wilson 'Jimmy Connors C-1' metal tennis racquet, with double shaft; metal shaft bridge; plastic shaft casing featuring 'W' logo and metal whipping; and a handle wrapped in brown leather. Net anchored to metal wire wrapped around head frame. Green plastic butt cap with adhesive label featuring manufacturer's 'W' logo in red. Model name printed onto adhesive label on shaft bridge. (2) A green & white vinyl racquet head cover, with zipper, printed with manufacturer and model name. Materials: Metal, Plastic, Adhesive tape, Nylon, Vinyl, Leather, Adhesive labeltennis

Two part object. (1) A Seamco Ken Rosewall-endorsed metal tennis racquet, with double shaft, metal shaft bridge, plastic throat bridge; black plastic shaft casing embossed with 'ACRO'; and a handle wrapped in brown leather. Black plastic butt cap with adhesive label featuring manufacturer's 'S' logo and name. Manufacturer name on label on throat bridge (reverse). Endorser name on troat bridge (obverse). (2) A white & blue vinyl racquet head cover. Printed in red on cover is maunfacturer name and endorser signature (both sides). Materials: Metal, Plastic, Adhesive label, Leather, Adhesive tape, Nylon, Vinyltennis

Two part object. (1) A Seamco Ken Rosewall-endorsed metal tennis racquet, with double shaft, metal shaft bridge, plastic throat bridge; black plastic shaft casing embossed with 'ACRO'; and a handle wrapped in brown leather. Black plastic butt cap with adhesive label featuring manufacturer's 'S' logo and name. Manufacturer name on label on throat bridge (reverse). Endorser name on troat bridge (obverse). (2) A white & blue vinyl racquet head cover. Printed in red on cover is maunfacturer name and endorser signature (both sides). Materials: Metal, Plastic, Adhesive label, Leather, Adhesive tape, Nylon, Vinyltennis

Two part object. (1) A Seamco Ken Rosewall-endorsed metal tennis racquet, with double shaft, metal shaft bridge, plastic throat bridge; black plastic shaft casing embossed with 'ACRO'; and a handle wrapped in brown leather. Black plastic butt cap with adhesive label featuring manufacturer's 'S' logo and name. Manufacturer name on label on throat bridge (reverse). Endorser name on troat bridge (obverse). (2) A white & blue vinyl racquet head cover. Printed in red on cover is maunfacturer name and endorser signature (both sides). Materials: Metal, Plastic, Adhesive label, Leather, Adhesive tape, Nylon, Vinyltennis

Document. Eight photostat pages of advertisements for 12 Bendigo businesses taken from the Sandhurst Mechanics Institute Directory. (a) MacRobertson- Confectioner & Bolton Bros- Printers Bookbinders. (b) Sandhurst Rolling Stock Co. (c) Samuel Webb- Merchant Tailor & W Bradley and Son- Jewellers. (d) Charles Ross & Co- Drapers & Carpets & Henry Jackson and Co- Ironmongers. (e) J W Burrows- Printers, Bookbinders. (f) Alfred Day- Asphalt Manufacturer & Union Bank of Australia. (g) Henderson & Goodisson- Dept Store. (h) A Gordon- Picture frame manufacturer. Handwritten in ink on top of page 3062a is 'for June Parry, Hist. Soc.'Sandhurst Mechanics Instituteorganization, business, commercial, sandhurst mech.inst. business directory, macrobertson confectioner, bolton bros., sandhurst rolling stock co., samuel webb, w bradley & son, charles ross & co., henry jackson & co., jw burrows, alfred day, union bank, henderson & goodisson, a gordon

This large bean slicer was first manufactured in the late 1800's in England and exported to Australia. Due to the transportation costs it was not used in many Domestic kitchens. This slicer would have been in a kitchen of a higher socio/economic family within the Kiewa Valley. In the 1930's the manufacturer traded this slicer as "domestic labour-saving slicers". This was the beginning of new generation of the kitchen "gadget". The introduction of the Asian "gadget" manufacturer from the late 1950's saw English export diminish by the cheaper Asian products.This item has great significance because it demonstrates that even "remote rural" locations, such as the Kiewa Valley in the early 1900s still were able to optain "state of the art" labour saving "kitchen" appliances. It was these English and European goods that were made "to last" which brought the mind set "British is best" This mindset was only altered by periods of Australian economic down turns and the cheap Asian product availabilityThis bean slicer is made from cast iron with a round body housing three rotating blades screwed into a riveted spinning base plate. The whole body of this slicer is green with a "natural coloured" handle. A "G" clamp is part of the main frame to fasten the slicer onto a table/counter top (when in use). On the side of the handle and along the top plate "SPONG & Co Ltd" and opposite "BEAN SLICER" below this "No 633"domestic kitchen time savers, food processors, bean slicers