Used at Orbost & District Hospital c. mid 20th century for urinary problems.This item is associated with Orbost Hospital and is an example of an early medical tool.A long metal catheter with a curved end, made of metal, possibly stainless steel. It has a small eyelet hole near the curved end. Inside is a fine metal tube. It has a red tag ORBOST. medical-instrument catheter

These whale harpoons belonged to Arthur Ashby. The longer one was his personal hand-forged harpoon. Arthur Ashby was a harpoonist written about in the book, "Killers of Eden". They were handed down to his son, Norman Ashby who gave them to the donor's father for safe-keeping as he did not have a permanent residence. Two harpoons. .1 is a hand held iron harpoon. It is very long with an open neck at one end and a large blade at the other. .2 is smaller and was used in harpoon guns. It is made of brass with a pointed end.whaling harpoons ashby-arthur maritime-technology

Chest wooden cloth covered with decorative metal reinforcements on end. 4 wood supports on lid, 1 wood support front & back. I lock & 2 cliplocks at front. Leather handles at ends.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Hand forged metal tool, possibly a sailmaker's hook with the hook broken. It may be a fire iron. The twisted metal is a skill learned by a blacksmith.The item is a handmade tool, an example of the work of a blacksmith. Smiths were sought after in colonial Australia. Their trade allowed them to custom make work for the different industries necessary for survival in a new land.Sailmaker's stretching tool; long thin metal rod bent in half, with centre forming a handle or loop, and long ends twisted together to form a stem. The loose ends are formed together but appear broken.warrnambool, shipwreck coast, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, tool, sailmaker's tool, fire iron, blacksmith, twisted rod, twisted wire, sailmaker's hook

Violin bow; long, rounded wooden stick, with tapered end. A shaped section, the Frog, is joined on below the wide end. The Frog is decorated with mother of pearl. A screw is inserted into the base, used for tightening the strings.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, violin bow, musical instrument

Used for electrical experimentsBlack metal cage with curved mesh top. Three rows of ceramic resisters supporting wire elements. Two red terminals at one end. Red label - 30 OHMS, 4A A MAX on endMetal plate on top - "Leitz - Wetzlar 230 volts 7 amp"load resister, electrical, volts, ceramic resisters, wire elements, leitz-wetzlar, amperes, omhs

This metal bracket is part of the wooden barque, the Grange, built in 1840. The bracket was recovered from the shipwreck of the Grange in around 1968, 110 years after the Grange was wrecked (see below for further details on the Grange). It is part of the John Chance Collection. THE GRANGE, 1840-1858- The wooden barque ’Grange’ was a three-masted ship built in Scotland in 1840 for international and coastal trade. On March 22, 1858, the Grange set sail from Melbourne under Captain A. Alexander, carrying a cargo of ballast. The barque had left the Heads of Phillip Bay and was heading west along the Victorian coast towards Cape Otway. The ship struck Little Haley’s Reef at Apollo Bay due to a navigational error and was stuck on the rocks. The crew left the ship carrying whatever they could onto the beach. Eventually, the remains of the hull, sails and fittings were salvaged before the wreck of the Grange broke up about a month later. About 110 years later, in 1968, the wreck of the Grange was found by divers from the Underwater Explorers Club of Victoria. They were amazed to find a unique, six to nine pound carronade (type of small cannon) and a cannonball on the site. There have been no other similar carronades recorded. In that same year the anchor of the Grange was recovered by diver John Chance and Mal Brown. The bracket is significant historically as an example of hardware used when building wooden ships in the early to mid-19th century. The bracket is historically significant as an example of the work and trade of blacksmith. The bracket also has significant as it was recovered by John Chance, a diver from the wreck of the Grange in the 1968. Items that come from several wrecks along Victoria's coast have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. The bracket is historically significant for its association with the 1840s wooden barque, the Grange. The Grange is an historical example of a Scottish built vessel used for international and coastal trader of both cargo and passengers in the mid-19th century. The Grange is an example of an early ship, designed with a wooden hull. It is significant as a ship still available to divers along the south coast of Victoria, for research and education purposes. The Grange is an example of a mid-19th century vessel that carried a weapon of defence onboard.Bracket, brass, U shaped with rectangular flat ends. Both ends have a formed rectangular hole in them; the hole has rounded corners. The metal has corroded in places and has green concretion.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, west coast trader, apollo bay, mid-19th century shipwreck, the grange, scottish barque, little henty reef, captain a alexander, underwater explorers club of victoria, 1840s carronade, vhr 5297, coastal trader, wooden shipwreck, john chance, wooden ship, ship fitting, bracket

9094.1 Sewing kit on a beaded string, to be worn around neck, with scissors on one end, thimble in cotton purse on the other end, with a disc for pins and a folded book shaped container for needles. 9094.2 Thimble

The vaginal syringe, also known as a female syringe, was introduced in the early 1900s and was in use until the late 1940s when it was replaced by the glass douche nozzle. (Thackray, 'Midwifery & Gynaecological Instruments, (M)463, p. 264.)Mary Howlett (1840-1922) began practising as a country midwife in 1866 in the western district of Victoria. She qualified as a 'ladies monthly nurse' in 1887 and continued to practise as a nurse and midwife until 1920. She began her six months training at the Melbourne Lying-In Hospital. She was known by many as 'Auntie', and her career spanned more than 50 years. Mrs Howlett's midwifery box and contents were given to Dr Frank Forster, and he donated them to the museum collection in 1993. Vaginal syringe with glass barrel and plunger and a cork bung. Fluid capacity of syringe 60-90 mls. Cotton thread is woven tightly around the end of the plunger. There are five holes in the end of the glass barrel.midwifery

The Stole is a Methodist Minister's stole or perhaps the President's stole.Black fabric sole with gold fringing at each end. The edges are decorated with gold brocade style ribbon. The stole has symbols at each end and a small cross at the middle. The stole is made of synthetic materials."METHODIST CHURCH OF AUSTRALASIA THE BEST OF ALL IN GOD WITH US"methodist church of australasia, regalia

Mary Joyce Abbott made the quilt in 1972 in Bendigo. The quilt was constructed on Mary’s old Singer sewing machine with knee-action drive. Mary gifted the quilt to her daughter Sandra who used it on her bed for about a decade then retired it when she purchased her first doona. Mary was an excellent seamstress and a very early winner of Melbourne Show quilt prize with two single log cabin style quilts. In the mid-1980s Sandra roughly stitched Mary’s name and the date onto the back of the quilt.The quilt is constructed out of crazy quilt blocks, machine sewn, and made from factory offcuts of velveteen in a kaleidoscope of colours. The top end has squared edges and the bottom end has rounded edges.Mary Abbott \ 1972 (sewn into back of quilt)quilts, textiles, bed, sewing

This lanyard was owned by Matthew Calvitto. Matthew moved to Woodend with his family at the age of one. He commenced his career in the 56th Battalion Army Reserve unit. In 1999 or early 2000 he volunteered to join the regular Army. He was posted to the 6th Royal Australian Army Regiment, D company. His initial training was at either Shaulwater Bay or Conundra. After his training he served for 6 months in Timor, in either the second or third rotation. Matthew and the other members of the D Company received battle honours. Matthew was their forward scout, as well as a marksman, which you need to qualify for every year.As an item that belonged to Matthew Calvitto, a local Woodend veteran who received battle honours for his service in Timor, this lanyard has social and historic significance. The provenance of the item is know as it was donated by family members. The item is also represenantive of a type of military lanyard that was issued to Army personnel during the late 20th century. The item is also in good condition. Yellow and brown patterned lanyard. There is a loop at one end which is tied with a large knot, at approximately one third of the length of the item. Another small loop at the other end which is tied with a smaller knot. matthew calvitto, calvitto, woodend rsl, woodend, 56th battalion army reserve unit, 6th royal australian army regiment, d company, timor, forward scout, marksman

BHS CollectionCream coloured faux fur, with a random sparkling thread, glisteneing reflected light. Lined with cream satin. Rounded ends. Faux fur five cms in length. Tapered from centre to the rounded ends.costume accessories, female, white faux fur stole

"BEHIND BAMBOO" "An Inside Story of the Japanese Prison Camps" Author - ROHAN D. RIVETT "War Correspondent Prisoner of War, on the Burma-Siam Railway"Hard cover book. Cover - cardboard, light orange buckram with red and white print on front and spine. 400 pages - cut, plain, off white paper, illustrated - black and white and colour illustrations. Front end papers - owner's name, owner's stamp, book seller's label. Price notation.Front end papers - Owner's name - handwritten, black pen, "O.PELL / 7 VIOLET ST/ BGO" "M. PELL/ ORBOST" Owner's stamp - black ink "BENDIGO DISTRICT RSL SUB BRANCH INC/ PO BOX 42/ LONG GULLY 3550. Book seller's label - silver on black background A.J. DIGBY/ BOOKSELLER AND STAT (?)/ BAIRNSDALE" price notation - grey lead pencil "$10/ DMTY"books, military history, ww2, japanese prison camps

Black and White prints contained within the Wal Jack Bendigo and Geelong Album, see Reg Item 5003 for more details. Set of two photographs of Bendigo 22 decorated for the Centenary of the discovery of Gold Celebrations inside the depot on 14-7-1951 by Keith Kings. .1 - a side view of the tram in side the depot. .2 - an end view of the tram On the rear in blue ink .1 - "SEC Bendigo No. 22 decorated for "Gold" celebrations 1951, side view / 14.7.51" .2 - "SEC Bendigo No. 22 decorated for "Gold" celebrations 1951, end view / 14.7.51". Both have the K. S. Kings copyright stamp in the top right hand corner, and the numbers E(w)(vi) and E(w)(v) written in respectively.trams, tramways, bendigo, gold, gold centenary, gold tram, depot, tram 22

This Indian club comes from an early 20th century Warrnambool Men’s Physical Culture group but it is not certain which one it was. Gymnastics and Physical Culture groups were very popular in Warrnambool at the end of the 19th century and the beginning of the 20th century. They were usually attached to sporting or church groups and had both male and female participants. One important Physical Culture group in Warrnambool was a Sandow group, dedicated to promoting the Sandow philosophies and system of physical exercise. Eugen Sandow was a German who gained fame as a strong man, touring the world demonstrating his feats of strength and promoting his philosophy of health and good living. He toured Australia in 1902 and the result was the formation of many Physical Culture groups promoting the Sandow system. The Warrnambool group was said to be the first Sandow club established in Australia. No information has been found on the name ‘Dicks’ on the base of the club. This Indian club is of interest as a memento of the times in Warrnambool when many gymnastics and physical culture groups were operating. It may be a memento from the Warrnambol Sandow Physical Culture Group. This is a bottle-shaped wooden club with a wooden knob at the top end and three ridges incised into the main section of the club. The wood has been varnished but the surface is now a little rubbed and worn. A name is written on the base in black ink‘……Dicks’ warrnambool physical culture groups, eugen sandow

Public library end processing stickers "Not for Loan" and call number details on front cover.annual report, diamond valley/eltham community health and welfare service

.1) - .3) Fuel, compressed Hexamine Tablets in beige cardboard boxes with directions for use on rear. Made by the ADI. .4) Box of matches, green & red coloured box cover by Greenlites with green tipped waterproof safety matches in box tray..1) - .3) Stamped in black ink on the end of the box: "Lot 33 MY-92"military equipment, passchendaele barracks trust, hexamine, fuel

Photographic documentation of World War II in both the European and Pacific theatres of war.Illustrated hard cover with title on cover & spine in black & white letters. Dust cover illustrated front & back. Red and grey in colour. 600 pages with cut edges. Black & white illustrations.On front end paper: To Len Xmas 1999, Cynthia Donated by Len Buches familybooks-military-history, photography-photographs

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden objects. Traditionally, moulding planes were blocks of wear-resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other workers to pull the plane ahead of the master who guided it. Company History: The Holtzapffel dynasty of tool and lathe makers was founded in Long Acre, London by a Strasbourg-born turner, Jean-Jacques Holtzapffel, in 1794. The firm specialized in lathes for ornamental turning but also made a name for its high-quality edge and boring tools. Moving to London from Alsace in 1792, Jean-Jacques worked initially in the workshop of the scientific-instrument maker Jesse Ramsden, Anglicizing his name to John Jacob Holtzapffel. In 1794 he set up a tool-making partnership in Long Acre with Francis Rousset and they began trading under the name of John Holtzapffel. From 1804 he was in partnership with the Mannheim-born Johann Georg Deyerlein until the latter died in 1826, trading under the name Holtzapffel & Deyerlein. Holtzapffel sold his first lathe in June 1795, for £25-4s-10d, an enormous price at the time. All of Holtzapffel's lathes were numbered and by the time he died in 1835, about 1,600 had been sold. The business was located at 64 Charing Cross, London from 1819 until 1901 when the site was required "for building purposes". The firm then moved to 13 and 14 New Bond Street and was in premises in the Haymarket from 1907 to 1930. John's son, Charles Holtzapffel (1806–1847) joined the firm in 1827, at around which time the firm became known as Holtzapffel & Co. Charles continued to run the business after his father's death. He wrote a 2,750-page treatise entitled Turning and Mechanical Manipulation, published in 1843 which came to be regarded as the bible of ornamental turning. The final two volumes were completed and published after his death by his son, John Jacob Holtzapffel (1836–1897). When Charles Holtzapffel died in 1847 his wife Amelia ran the business until 1853. John Jacob II, the son of Charles and Amelia, was head of the firm from 1867 until 1896. A nephew of John Jacob II, George William Budd (1857–1924) became head of the firm in 1896. His son John George Holtzapffel Budd (1888–1968) later ran the business. By the early twentieth century, ornamental turning was going out of fashion, and the firm sold its last lathe in 1928. A vintage tool made by a well-known firm made for firms and individuals that worked in wood. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture or other items this had to be accomplished by hand using one of these types of planes. A significant item from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture was made predominately by hand and with tools that were themselves hand made shows the craftsmanship used to make such a unique item. Moulding Plane Holtzaffel 64 Charing & Owner J Heath 9/16" marked opposite endflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, plane, j heath

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. All we known about J Budd is that he was a tool maker and retailer that operated a business in London between 1832 to 1864. There are many of his tools including decorative moulding planes of all sizes and designs for sale around the world and that his tools in particular moulding planes are well sought after by collectors of vintage tools. A vintage tool made by a known maker, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture, door trims etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant tool from the early to mid 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item. Moulding Plane J Budd London maker & No 6, opposite end Stamped J Heath (owner)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, j budd

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. All we known about J Budd is that he was a tool maker and retailer that operated a business in London between 1832 to 1864. There are many of his tools including decorative moulding planes of all sizes and designs for sale around the world and that his tools in particular moulding planes are well sought after by collectors of vintage tools. A vintage tool made by a known maker, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture, door trims etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant tool from the early to mid 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item. Moulding Plane J Budd London & No 8 opposite end also Stamped J Heath (owner)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, j budd

Typed below photograph, "Ringwood Reserve - Northern End. Now Eastland site - 1963"

Fishes of Australia and Their Technology Author: T C Roughley, Economic Zoologist Publisher: Government Printer Sydney N S W Date: 1916 Pastedown end page has sticker from Warrnambool Mechanics Institute and Free Librarywarrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, shipwrecked-artefact, book, warrnambool mechanics’ institute, fishes of australia and their technology, t c roughley

Prodromus of the Palaeontology of Victoria Decade 3 Author: Frederick McCoy Publisher: Government Printer Melbourne Date: 1876Pastedown end page has sticker from Warrnambool Mechanics Institute and Free Librarywarrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, shipwrecked-artefact, book, warrnambool mechanics’ institute, prodromus of the palaeontology of victoria decade 3, frederick mccoy