Small black ebonised wooden Elephant.ornaments, wood, elephant

This vase was gifted to ANZCA during a visit to the college by fifteen members of the Chinese Society of Anesthesiology (CSA). This visit signified an exchange of education, research and friendship. A Memorandum of Understanding (MOU) was signed between the ANZCA President, David A Scott, and the President of the CSA to signify the spirit of collaboration. Medium sized, round shaped vase, glazed red, possibly lacquerware, decorated with raised relief creme coloured dragons among scrolling clouds. Attached to a square brown plinth. Vase came with a perspex cover and presented in a red, fabric box decorated with gold flowers.lacquerware, wood, corporate collection

Ornamental container made from a coconut shell, heavily carved sitting on top of 3 ebonised Elephants, topped with a removable lid with an Elephant handle.ornaments, wood, container

Box used for carriage of harness dressingsDressing for leather harness imported and sold by Holden and FrostRectangular wooden box with hinged lidFrank Millars Harness Dressingwood, box, printed

As used by manufacturer for shipment of his productsas sold by Holden and Frost Ca 1900Small wooden box with no lid, with inscription of manufacturer printed on.3 Dozen Frank Millar Peerless shoe blacking on front 3 dozen Frank Millar Peerless ??? on both ends The Frank Millar Company New Yorkshipping container, box, wood

Refer Cat No 2502Photo, framed, colour enhanced, portrait of a soldier with peak cap, re W A BRIGHAM. Framed in wood, ornate with gold, black & wood staining.photography-photographs, frame accessories

1 sheave wood block & 1 sheave wood block. Sheaves wooden. Metal hook & copper strap on one side. Painted whiteflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

8318.1 - Roughly rectangular mudstone with fragments of fossil wood and plant matter, notably large ovoid cross section through a piece of fossilised wood.

Robley Hand Hydraulic Woolpress, donated by Mr David Hamilton of Hamilton & McLeod, Geelong. Originally installed in "Spring Creek Woolshed", Maldon, Victoria. Typical example of a manual hand hydraulic press with wire rope linkage, in an era when very few woolsheds had electricity.Robley HY speed wool press made of orange painted wood. Robley HY speed wool press made of orange painted wood.shearing wool bales, hamilton, mr david, shearing, wool bales

A 'Blue' Fox wood/graphite, open throat & open shaft tennis racquet. Materials: Wood, Graphite, Paint, Ink, Silk, Leather, Plastictennis

A 'Blue' Fox wood/graphite, open throat & open shaft tennis racquet. Materials: Wood, Graphite, Paint, Ink, Nylon, Leather, Plastictennis

Wood plaque mounted with a metal medal and a plastic label which states 'US - Australia...September 28030, 1984'. Materials: Wood, Metal, Plastictennis

Metal plate photographic negative image of 1962-3 Davis Cup team. Metal plate fixed to wood block. Materials: Wood, Metaltennis

Chrome plated pullover used to close wool bales. In early use at Strachans (a lighter, simple long handled hook was used later). Chrome plated tool with wood handle. Tool pivots at two points and has hooks on the end. The wood handle also has string binding. chrome, baling hook, pullover, tool, sheep, wool, industry

Ticket for an Australian Electric Traction Association tram tour - Geelong Tram Tour, 29 March 1948. C. L. Busch Secretary, L. Marshal Wood - President. On the rear is an advert for "Coles & Garrard Pty Ltd", sight testing, opticians, giving both the Melbourne and Geelong address. Printed in black on grey card.trams, tramways, aeta, tours, ticket, geelong

Moulding Plane: A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. Auburn Tool Company: The Auburn Tool Company is known to exist from 1864 to 1893. George Casey reorganized the firm of Casey, Clark and Company as a joint-stock company in 1864, under the company name of Auburn Tool Company. The 1865 New York State Census noted the firm as a manufacturer of the plane, plane irons, and skates. The production that year was listed as 30,000 pairs of skates and 35,000 planes along with 25,000 dozen plane irons. The plane irons carried the trademark "Thistle". Both skates and plane irons were made from welded wrought iron and cast steel. The Auburn Tool Company was among the five leading plane manufacturing firms existing in the mid to late 19th century USA. Others were: H. Chapin's Son; Greenfield Tool Company; and Sandusky Tool Company. Auburn Tool Company, with these others, was also a founding member of the Plane Makers Association, organized around 1858 to fix prices. Most of the companies tools were manufactured by prisoners and in 1866 the firm was outbid for prison labour by J M Easterly and Co. After losing the contract with the prison authority they constructed a new building and continued in the plane manufacturing business with private labour. The 1870 US Census reported the firm had 21 machines, driven by water power, employing 66 males, producing annual products valued at us$70, 000. After A. Howland and Company was dissolved in 1874, the Auburn Tool Company again resumed using contract labour at the State Prison until 1877. The Auburn Tool Company merged with the Ohio Tool Company of Columbus, Ohio, on Nov 14, 1893. Although plane manufacturing was continued at Auburn until after 1907, after this merger the firm went under the name of the Ohio Tool Company. A significant item from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture was made predominately by hand and with tools that were themselves hand made shows the craftsmanship used to make such a unique item. It also gives an insight into how many manufacturing companies bid for the rights to use prison labour to make their products at this time in our history. Decorative wood Moulding, plane Round type Auburn New York. Owner A Neudt Size 14 flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown moulding required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it.A vintage tool made by an unknown company, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture, door trims etc. or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant tool from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item. Wood Moulding, plane Rabbet Hollow type Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Dedication of plaque Laminated Newspaper Photo in wood glass frameNil

GiftOrnamental hippo carved from a dark wood"PMA 0141"

Fids were used for spreading strands of rope so that they could be spliced, for making knots, loosening or holding knots open and holding holes in canvas open. This item recognises the art and skill of knots and sailors’ ropework. Modern fids are typically made of aluminum, steel, or plastic.A narrow cone-shaped tool. It is made of wood.tool fid equipment shipping maritime

2 sheave wood block with ubolt on topflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

2 sheave wood block becket and eye.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Electromagnet Dynelectron in large wood black box. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Ship Scraper with wood handle, triangular head.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, ship scraper, scraper

Scotch Driver is a tool that is used to knock the iron hoops on a barrel into position they are grooved to prevent them from slipping off the hoop as they are struck with a hammer to drive the hoop over the staves.A coopers driver that was made as a tool to enable a cooper to position hoops on a barrel that has not changed for hundreds of years. Item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset as it is believed to have been produced before 1950..Socket driver Scotch pattern wood and metalNoneflagstaff hill, warrnambool, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, scotch driver, barrel making, coopers tools

2 sheave wood block painted greyflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village