Showing 2013 items
matching craft
-
Flagstaff Hill Maritime Museum and Village
Craft - Ship model, Pioneer Melbourne
Ship model Pioneer Melbourne M1 wooden ship model on 2 wooden stand. Single mast.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Flagstaff Hill Maritime Museum and Village
Craft - Ship Model, Loch Pearl
Ship model Loch Pearl 3 masted ship in glass case with clear rigging. Has 4 flags at rear end, bow is black with white line and ship is leaning to one side because the tissue paper is damaged. Has backdrop of lighthouse and sky.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Flagstaff Hill Maritime Museum and Village
Craft - Ship Model, Arethusa, 1894
Original Ships History: Aréthuse was a French frigate, launched in 1757 during the Seven Years War between England and France. She was captured by the Royal Navy in 1759 and became the fifth-rate HMS Arethusa. She remained in Royal Navy service for twenty years until she was wrecked after being badly damaged in battle. The ship was constructed at Le Havre for privateer warfare as ”Pélerine” and soon after her launch, she was purchased by King Louis XV (1710-1774) and commissioned as Aréthuse on 21 January 1758. In June, under captain Vauquelin, she sailed through the British blockade of Louisbourg helping to defend the site before departing, again forcing the blockade. On 18 May 1759, she was in transit from Rochefort to Brest, under the command of Louis-Philippe de Rigaud, Marquis of Vaudreuil, when she was intercepted near Audierne Bay (Baie d'Audierne) by three Royal Navy ships the Thames, Venus and Chatham. She attempted to escape but after two hours, lost her topmasts and was overtaken by her pursuers. Thames and Venus engaged her with heavy fire, causing 60 casualties before the vessel surrendered. She entered service with the Royal Navy for the rest of the war, and was in service in British home waters and became responsible for the capture of several French privateer cutters. In 1777, a Scotsman James Aitken, widely known as John the Painter, was hanged from her mizzenmast for burning the Rope House at Portsmouth Royal Dockyard on 7 December 1776, to aid the struggle of American independence. The mast was struck from the ship and re-erected at the dockyard entrance so as many people as possible could watch the execution. On 17 June 1778, she fought a famous duel against the French 36-gun frigate, Belle Poule. Belle Poule was on a reconnaissance mission, along with the 26-gun Licorne, the corvette Hirondelle and the smaller Coureur when she encountered a large British squadron that included Arethusa at a point 37 km south of The Lizard. Admiral Keppel, commanding the British fleet ordered that the French ships be pursued. The captain of Belle Poule refused the order to sail back to the British fleet. The British fired a warning shot across his ship's bow, to which he responded with a full broadside. This action began a furious, two-hour battle between the two ships that resulted in the deaths of the French second captain and 30 of the crew. However, Arethusa was crippled by the loss of a mast and withdrew, allowing Belle Poule to escape. This battle was the first between British and French naval forces during the American Revolutionary War and took place around three weeks before France had made a formal declaration of war. The battle was widely celebrated in France as a victory, even inspiring a hair-style in court circles that included a model of Belle Poule. It was also viewed as a victory in Britain and became the subject of a traditional Sea shanty, The Saucy Arethusa. On 18 March 1779, under captain Charles Holmes Everitt, Arethusa engaged the French Aigrette, under Lieutenant Mortemart, sustaining considerable damage in the fight. Arethusa was wrecked the next day off Ushant, It was the fame of this Arethusa which induced the Royal Navy, during the following two centuries, to bestow the name on a further seven consecutive individual ships and two consecutive classes of cruisers. (See Provenance Sec this document for information on the makers of this model). Model ship of the 3 masted frigate the “Arethusa”, model is painted black and white with varnished deck and masts. A British flag is flown at the stern. The ship is displayed in a glass case with timber frame and 4 legged stand.Label at bottom of glass case, printed in black script on a gold strip “Model of the “Arethusa" "A famous frigate, taken from the French by the British, on the 18th of May 1759 and lost on the French coast in 1779. – Made and presented by G. Lance & P. Diggins, October 1894” flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, arethusa ship model, george lance, peter diggins, len asling, warrnambool art gallery, warrnambool exhibition, message in a bottle -
Flagstaff Hill Maritime Museum and Village
Craft - Ship Model, Eumeralla
Ship model Eumeralla steamship with one funnel, two masts portholes in hull, set against a coastal scene with lighthouse. Ship is painted green. Model is in a wooden framed glass case. Split on background scene. Case strengthened by metal brackets at top corners and bottom front corners. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Flagstaff Hill Maritime Museum and Village
Craft - Ship Model, Victoria
Ship model, Victoria with full ship rig. 3 masted, with 2 deck houses, 2 boats on top of forward house. Yellow hull decoration. Mounted in case with painted backdrop and ocean. Timber case painted black, glass face and brass trim. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, ship model -
Flagstaff Hill Maritime Museum and Village
Craft - Ship Model, Auster
Ship model, Auster relief, 3 masted sailing ship, teal colour. Background of sea and sky, island with palm trees, seagulls. Front wood frame of case painted black, back and sides painted grey. Metal handle on top panel of case. "AUSTER" painted on side of bowflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, ship mode., auster, sailing ship -
Flagstaff Hill Maritime Museum and Village
Craft - Ship Model
Ship model relief of unnamed, three masted sailing ship, painted green. British flag is flying from mast. Other ships and a rowing boat are also in the water and land on both sides has lighthouse and buildings. Wooden case has sloping sides and glass front. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, ship model, sailing ship model, water craft -
Flagstaff Hill Maritime Museum and Village
Craft - Ship Model, S.S. Orotava
This is a ship model of the SS Orotava, a British Screw Steamship built at Barrow-in-Furness, county of Lancashire, by the Naval Construction and Armaments Company (NC & A Co.) in 1889. Her gross tonnage was 5552.10 tons, length 430 feet, breadth 49.3 feet and depth 34.2 feet. She was built for Pacific Steam Navigation Company (of 31, James Street, Liverpool) and used as a passenger liner. She was launched 1889 and made 2 voyages for the Pacific Steam Navigation Company in 1889. Then under her new management of the Orient Line, she made her first sailing 6th June 1890 from Liverpool to Australia via Suez. During the Boer War (1889 – 1903) she served as a troop ship but apart from this she remained in the Orient Line’s Australia service until 1906. On 14th December 1896 the Orotava sunk at Trilbury Docks after being serviced on her return from Australia, becoming unstable and taking in water. Five men lost their lives. The ship was then raised to dry dock and repaired for service again and an investigation launched into the cause of the sinking. Between 1901 – 1906 the name ‘Orient-Pacific Steam Line’ was used due to the close ties between the Pacific and the Orient lines. In 1906 the Pacific Steam Line Australian service was taken over by the Royal Mail Steam Packet Co. and the alliance between them and the Orient Line was dissolved in 1909. Orotava was then used in the West Indies service of the Royal Mail Line In World War 1 (Dec 1914 – June 1916) she served as HMS OROTAVA, an armed merchant cruiser. She was broken up in 1919. Ship model of SS Orotava, 4 masts, 2 funnels, British passenger liner, launched in 1889.No case. Mounted on timber base. (some rigging broken, lifeboat now a separate piece)."OROTAVA" painted in white on each side of the bow. 'OROTAVA / LONDON" painted in white on the stern.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, ship model, ss orotava, naval construction and armaments co., n c & a co., pacific steam navigaiton company, passenger liner, orient line, orient-pacific steam line, royal mail line, hms orotava -
Flagstaff Hill Maritime Museum and Village
Craft - Ship Model, General Gordon
The model depicts one of many sailing vessels to travel across the world for trade and migration in the 18th to 20th centuries. The craft of model making is also represented by this model. There are many craftsmen with a fascination for the sea and objects connected to it.Ship model, the sailing ship "General Gordon", in a glass and timber display case. The model is of a four masted Barque with the royal sails over double top and top gallant sails. Inscriptions are on the model. Marked "General Gordon" on side of ship and on red pennant. Flag with crab on one side and shell on other. Union Jack. Red ensign.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, general gordon, ship model, barque, sailing ship, vessel -
Flagstaff Hill Maritime Museum and Village
Craft - Ship Model, Loch Torridon
Ship model Loch Torridon 4 masted barque, painted grey, white and black. No glass case. Handmade in Glasgow, Scotland, UK in 1898. Ship built on Clyde 1881. Some of the rigging broken.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, ship model, loch torridon -
Flagstaff Hill Maritime Museum and Village
Craft - Ship Model, Falls of Halladale
The iron-hulled, four-masted barque, the Falls of Halladale, was a bulk carrier of general cargo. She left New York on August 1908 on her way to Melbourne and Sydney. In her hold, along with 56,763 tiles of unusual beautiful green American slates (roofing tiles), 5,673 coils of barbed wire, 600 stoves, 500 sewing machines, 6500 gallons of oil, 14400 gallons of benzene, and many other manufactured items, were 117 cases of crockery and glassware. Three months later and close to her destination, a navigational error caused the Falls of Halladale to be wrecked on a reef off the Peterborough headland at 3 am on the morning of the 15th of November, 1908. The captain and 29 crew members all survived, but her valuable cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. ABOUT THE ‘FALLS OF HALLADALE’ (1886 - 1908) Built: in1886 by Russell & Co., Greenock shipyards, River Clyde, Scotland, UK. The company was founded in 1870 (or 1873) as a partnership between Joseph Russell (1834-1917), Anderson Rodger and William Todd Lithgow. During the period 1882-92 Russell & Co., standardised designs, which sped up their building process so much that they were able to build 271 ships over that time. In 1886 they introduced a 3000 ton class of sailing vessel with auxiliary engines and brace halyard winches. In 1890 they broke the world output record. Owner: Falls Line, Wright, Breakenridge & Co, 111 Union Street, Glasgow, Scotland. Configuration: Four masted sailing ship; iron-hulled barque; iron masts, wire rigging, fore & aft lifting bridges. Size: Length 83.87m x Breadth 12.6m x Depth 7.23m, Gross tonnage 2085 ton Wrecked: the night of 14th November 1908, Curdies Inlet, Peterborough south west Victoria Crew: 29 The Falls of Halladale was a four-masted sailing ship built-in 1886 in Glasgow, Scotland, for the long distance cargo trade and was mostly used for Pacific grain trade. She was owned by Wright, Breakenridge & Co of Glasgow and was one of several Falls Line ships, all of which were named after waterfalls in Scotland. The lines flag was of red, blue and white vertical stripes. The Falls of Halladale had a sturdy construction built to carry maximum cargo and able to maintain full sail in heavy gales, one of the last of the ‘windjammers’ that sailed the Trade Route. She and her sister ship, the Falls of Garry, were the first ships in the world to include fore and aft lifting bridges. Previous to this, heavily loaded vessels could have heavy seas break along the full length of the deck, causing serious injury or even death to those on deck. The new, raised catwalk-type decking allowed the crew to move above the deck stormy conditions. This idea is still used today on the most modern tankers and cargo vessels and has proved to be an important step forward in the safety of men at sea. On 4th August 1908, with new sails, 29 crew, and 2800 tons of cargo, the Falls of Halladale left New York, bound for Melbourne and Sydney via the Cape of Good Hope. The cargo on board was valued at £35,000 and included 56,763 tiles of American slate roofing tiles (roof slates), 5,673 coils of barbed wire, 600 stoves, 500 sewing machines, 6,500 gallons of oil, 14,400 gallons of benzene, plumbing iron, 117 cases of crockery and glassware and many other manufactured items. The Falls of Halladale had been at sail for 102 days when, at 3 am on the night of 14th November 1908, under full sail in calm seas with a six knots breeze behind and misleading fog along the coast, the great vessel rose upon an ocean swell and settled on top of a submerged reef near Peterborough on the south-west Victoria’s coast. The ship was jammed on the rocks and began filling with water. The crew launched the two lifeboats and all 29 crew landed safely on the beach over 4 miles away at the Bay of Islands. The postmistress at Peterborough, who kept a watch for vessels in distress, saw the stranding and sent out an alert to the local people. A rescue party went to the aid of the sailors and the Port Campbell rocket crew was dispatched, but the crew had all managed to reach shore safely by the time help arrived. The ship stayed in full sail on the rocky shelf for nearly two months, attracting hundreds of sightseers who watched her slowly disintegrate until the pounding seas and dynamiting by salvagers finally broke her back, and her remains disappeared back into deeper water. The valuable cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. Further salvage operations were made from 1974-1986, during which time 22,000 slate tiles were recovered with the help of 14 oil drums to float them, plus personal artefacts, ship fittings, reams of paper and other items. The Court of Marine Inquiry in Melbourne ruled that the foundering of the ship was entirely due to Captain David Wood Thomson’s navigational error, not too technical failure of the Clyde-built ship. The shipwreck is a popular site for divers, about 300m offshore and in 3 – 15m of water. Some of the original cargo can be seen at the site, including pieces of roof slate and coils of barbed wire. The Falls of Halladale shipwreck is listed on the Victorian Heritage Register (No. S255). She was one of the last ships to sail the Trade Routes. She is one of the first vessels to have fore and aft lifting bridges. She is an example of the remains of an International Cargo Ship and also represents aspects of Victoria’s shipping industry. The wreck is protected as a Historic Shipwreck under the Commonwealth Historic Shipwrecks Act (1976). The Falls of Halladale shipwreck is listed on the Victorian Heritage Register (No. S255). She was one of the last ships to sail the Trade Routes. She is one of the first vessels to have fore and aft lifting bridges. She is an example of the remains of an International Cargo Ship and also represents aspects of Victoria’s shipping industry. The wreck is protected as a Historic Shipwreck under the Commonwealth Historic Shipwrecks Act (1976).Model Falls of Halladale, good condition in a glass case. falls of halladale, wright, breakenridge & co of glasgow, californian blue roof slate, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, shipwrecked-artefact, ships model, 1908 shipwreck, great clipper ships -
Flagstaff Hill Maritime Museum and Village
Craft - Ship Model, Loch Torridon, Early 20th century
The Loch Torridon was built in response to the need for a large cargo-carrying ship in the 1870s becoming famous for being one of the most per4fect four-masted barques ever built. She was built for the Loch Line in 1880 by Messrs. Barclay, Curle, and Co. Her measurements were 287 feet in length and 42 feet in beam, and 24 feet depth of hold. She was well sparred and her sail plan was so perfectly balanced that she was a very handy ship, easy on her helm, which was not a common virtue amongst large four-masted ships of her day. Her sails were interchangeable on all three masts, which was common in the last days of sail for both economical and practical purposes. The Loch Torridon was considered one of the most graceful and elegant ships ever launched from the Glasgow shipyards. The first master was Captain Pinder, the first cargo was bound for Melbourne Australia, after which she went on to Calcutta with a cargo of horses. On August the 22nd 1882 with a cargo of Jute onboard loaded in Calcutta the Loch Torridon ran into a storm. Sailing in heavy seas the captain, the second mate also the man at the wheel, and a boy was washed overboard with the first mate just escaping the same fate. Captain Pinder and the crew members could not be rescued and were never seen again with the first mate having to bring the ship home. The next Captain was Robert Pattman who was regarded as a fine navigator and seaman who sailed the Loch Torridon for the next twenty-six years and nine months. He had made 25 voyages around the world during this time without any serious mishap. In 1909 Captain Pattman resigned his command of the ship to switch to a steam vessel but unfortunately was injured on his first voyage and had to be landed at Falmouth, he dies of his injuries shortly afterwards. The Loch Torridon kept on sailing until 1915 after having been sold to a Russian company two years earlier. Near the end of January 1915, the ship sprang a leak of the west coast of Ireland and was abandoned sinking shortly afterwards. For further information regards possible maker of the model see Provenance sec this document: The item is of significance as an item made possibly by a man who served on the original ship making the item of historical significance given that the original craft was a well-known and respected trade vessel making voyages between England and Australia as well as the near East. Ship model Loch Torridon 4 masted, hull is black, grey and white. Ship in full sail with 4 lifeboats on deck. Ship sits on textured base. Has plain blue background. Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Bendigo Military Museum
Craft - CUSHION COVER, C.WW1
The cover has 56 badge representations, believed to be a WW1 souvenir.Cushion cover silk cream coloured with coloured transfers of British regimental badges. There is an open section in the middle possible for individual use.covers, cushions, souvenir, badges -
Queenscliffe Maritime Museum
Craft - Model Cerberus, Charles Bonnici, November 2021
Demonstrating cutting edge maritime military technology, the Cerberus patrolled the waters in and around Melbourne, protecting it and its rich gold resources from attack. The Victorian gold rush coincided with growing instability in Europe. Britain and Russia prepared to face each other in battle as the threat of a second Crimean War grew.The HMVS Cerberus was one of only three vessels of its exact type ever built, and is the only surviving example of this type of vessel in the world. It is also the only substantially intact warship of Australia’s pre-Federation colonial navies. This shipwreck rests in shallow waters at Black Rock, Melbourne.HAnd built timber model of the HMVS CerberusCerberushmvs cerberus, model making -
Queenscliffe Maritime Museum
Craft - Catamaran, Ray Goodwin from a design by CH & LN Cunningham
Around the 60s and 70s the most popular catamaran sailing on Port Phillip was the Cunningham designed Quickcat. Popular marine ply catamarans mostly owner built and used extensively in Port PhillipQuick Cat 16 foot, timber catamaran with trailer, beach buggy and construction blueprint Y Wood Ya, RGYCquick cat, catamaran, marine ply cats -
Port Melbourne Historical & Preservation Society
Craft - Rosette, WWI commemoration, Sharon Willcox, 11 Nov 2018
Red knitted rosette with green button. made to commemorate the anniversary of WWIwar, domestic life, sharon willcox, rachel mcvean, anzac centenary, remembrance day, waterfront welcomers, boomerang bag -
Port Melbourne Historical & Preservation Society
Craft - Needlework, Greeting from Port Melbourne, 1927 - 1928
White cotton oval shaped cloth embroidered with small flowers to spell out "Greetings from Port Melbourne". families, swallow & ariell ltd, domestic life -
Diamond Valley Vietnam Veterans Sub-Branch
Craft - Model M16, c2002
A replica model of M16 automatic rifle as on issue in Vietnam: on wooden stand with 1 straight magazine and 1 curved magazine and including bayonet - depicting one of the most common weapons of the Australian soldier in Vietnam.Lifelike model of a mainstay weapon of the Australian soldier in Vietnam.Model M16, replica, on wooden stand with 1 straight magazine and 1 curved magazine including bayonet, polished mahogany coloured wood.On the base: VIETNAMvietnam, vietnam war, diamond valley vietnam veterans sub branch -
Diamond Valley Vietnam Veterans Sub-Branch
Craft - Shield, c2002
Beginning in 2002 DViets conducted an annual lawn bowls 'çompetition' between National Servicemen and Regular soldiers; competition was lightly competitive and generally, the results were spread evenly between the two sides. Historical record of a social activity for members with a friendly rivalry between "Regs' and Nashos'.Perpetual Trophy for Nashos vs Regs for an Annual Challenge; first awarded 2002. Normally lawn bowls but in 2003, it was ten pin bowling. Rectangular in shape; dark polished timber with centre piece surrounded by a border of mini plates for winner each year.Centre piece comprises a Heading of "Diamond Valley Vietnam Veterans Regs Vs Nashos Challenge Shield" and a large VVAA logo; mini-plates border this text with engraving of the winners each year thereon. A border of mini-plates surround the centre piece with the names of winners each year engraved thereon. First presented 2002, Retired 2018.diamond valley vietnam veterans sub branch, social activities -
Diamond Valley Vietnam Veterans Sub-Branch
Craft - Model, Rickshaw, c2002
Model of common Vietnamese rickshaw; seems to have been faithfully made.Many soldiers would have enjoyed the rides and races in the actual rickshaws from time to time.Polished wooden model of common Vietnamese rickshaw. Nilvietnam, vietnam war, diamond valley vietnam veterans sub branch -
Diamond Valley Vietnam Veterans Sub-Branch
Craft - Model, Helicopter, c2002
Depiction of Iroquois (Huey) helicopter, the prime source of assisted transport for infantry during Vietnam war.Of great relevance to infantry soldiers: the helicopter provided many services to soldiers in the field and were much respected by the soldiers in return. Services included, but not limited to, were: transport to and from the field; medivacs for wounded soldiers; re-supply of food, arms, reinforcements etc, Model of Huey helicopter, made of polished wood.Nilvietnam, vietnam war, diamond valley vietnam veterans sub branch, raaf -
Diamond Valley Vietnam Veterans Sub-Branch
Craft - Gavel, c2002
Donated to Sub Branch to provide historical and formal elements to Meetings.It is significant to members in as much as it provides a standard of protocol, authority and respect to formal meetings eg the Annual General Meeting.Model in polished wood of a Gavel and Plate. Plate has inscription plate "To The DViets From Mackay Vietnam vets."; gavel has on the side a badge of the Rising Sun and on the top face an insignia of TBA; the handle of the gavel has a decorative snake entwined thereon.diamond valley vietnam veterans sub branch, mackay vietnam veterans qld -
Diamond Valley Vietnam Veterans Sub-Branch
Craft - White Cross, Kirby, 18/7/2016
One of 521 crosses placed in lawns of The Shrine, Melbourne, on 18th August 2016, as part of VVAA (Vic)'s 50th Anniversary of the Battle of Long Tan - each cross carries the name of an Australian soldier killed in the Vietnam war and a red poppy made by wife of Vietnam veteran.A poignant reflection of a life lost whilst in Service in Vietnam.White cross with name and service number printed; red poppy attached. John William Kirby, Service No. 27758vietnam, vietnam war, diamond valley vietnam veterans sub branch -
Diamond Valley Vietnam Veterans Sub-Branch
Craft - Novelty, 5/5/2017
A novelty item of a supposed hand grenade with pin to be used by customers lodging a complaint.Amusing presentation of a military solution to 'complaints'.Fake hand grenade mounted on finished timber base; plastic tag 'No. 1' attached..Complaints Dept, Please Take a Number.diamond valley vietnam veterans sub branch, novelty -
Diamond Valley Vietnam Veterans Sub-Branch
Craft - Model, M60, c2010
A faithful model of an M60 machine gun, the prime heavy shooter of infantry sections.A faithful depiction of that weapon which was often crucial to survival in Contact circumstances.Wooden, metal and plastic model M60 machine gun on tripod.vietnam, vietnam war, diamond valley vietnam veterans sub branch -
Diamond Valley Vietnam Veterans Sub-Branch
Craft - White Cross, Wallis, 18/8/2016
One of 521 crosses placed in lawns of The Shrine, Melbourne, on 18th August 2016 as part of Victoria's 50th Anniversary of the Battle of Long Tan - each cross carries the name of an Australian soldier killed in the Vietnam war and a red poppy made by the wife of a Vietnam Veteran.A poignant reflection of a life lost whilst in Service in Vietnam.White Cross with name and service number printed; red poppy attached.David Anthony B Wallis, Service No. 3794885vietnam, vietnam war, diamond valley vietnam veterans sub branch -
Diamond Valley Vietnam Veterans Sub-Branch
Craft - White Cross, McCarthy, July 2016
One of 521 crosses placed in lawns of The Shrine, Melbourne, on 18th August 2016 as part of Victoria's 50th Anniversary of the Battle of Long Tan - each cross carries the name of an Australian soldier killed in the Vietnam war and a red poppy made by the wife of a Vietnam veteran.A poignant reflection of a life lost whilst in Service in Vietnam.White cross with name and service number with a red poppy attached.John Noel McCarthy, Service No. 3112702vietnam, vietnam war, diamond valley vietnam veterans sub branch -
Diamond Valley Vietnam Veterans Sub-Branch
Craft - White Cross, Gillson, July 2016
One of 521 crosses placed in lawns of The Shrine, Melbourne, on 18th August 2016 as part of Victoria's 50th Anniversary of the Battle of Long Tan - each cross carries the name of an Australian soldier killed in the Vietnam war and a red poppy made by the wife of a Vietnam veteran..A poignant reflection of a life lost whilst in Service in Vietnam.White cross with name and service number printed; red poppy attached.Peter Raymond Gillson, Service No. 37857vietnam, vietnam war, diamond valley vietnam veterans sub branch -
Diamond Valley Vietnam Veterans Sub-Branch
Craft - White Cross, McNab, July 2016
One of 521 crosses placed in lawns of The Shrine, Melbourne, on 18th August 2016 as part of Victoria's 50th Anniversary of the Battle of Long Tan - each cross carries the name of an Australian soldier killed in the Vietnam war and a red poppy made by the wife of a Vietnam Veteran.A poignant reflection of a life lost whilst in Service in Vietnam.White cross with name and service number printed; red poppy attached.Robert Leo McNab, Service No. 39354vietnam, vietnam war, diamond valley vietnam veterans sub branch -
Diamond Valley Vietnam Veterans Sub-Branch
Craft - White Cross, Fitzpatrick, July 2016
One of 521 crosses placed in lawns of The Shrine, Melbourne, on 18th August 2016 as part of Victoria's 50th Anniversary of the Battle of Long Tan - each cross carries the name of an Australian soldier killed in the Vietnam war and a red poppy made by the wife of a Vietnam veteran.A poignant reflection of a life lost whilst in Service in Vietnam.White cross with name and service number printed; red poppy attached.Bryan Francis Fitzpatrick, Service No. A34167vietnam, vietnam war, diamond valley vietnam veterans sub branch