Showing 2002 items
matching beverley-wheeler
-
Stratford and District Historical Society
Poison Cart
Cart was operated by the Briagolong Rabbit Suppression League. It was purchased by the donor at the clearing sale for Jim Kelly in the late 1980s/early 1990s. Jim was the son of the main organiser of the Briagolong Rabbit Suppression League. Copies of the Minutes and accounts have been obtained, and are catalogued separately. Wood on cart was in much degraded condition, whole cart repaired by George Parker of the Stratford and District Historical Society, 2010.Rabbit poison cart by T.H. Hicks of Sydney. Consists of wooden frame and floor 80cm high, wheels with cast iron hubs. Chain-driven from one wheel, operator's seat at rear, with a lever mechanism to control the trench forming attachment. Horse shafts 2.6 metres long. Serial number is cast in one side of the bait bin, and not on the other."Ideal" / T.H. Hicks / Patentee / Nth Botany No 5102 / N.S.W.rabbits, vermin destruction -
Clunes Museum
Photograph
THREE PHOTOGRAPHS OF A PARADE 1972: .1 HORSE AND CART WITH "ERNIE THE FASTED IN THE WEST" WRITTEN ON THE SIDE .2 CLUNES HOSPITAL FLOAT- MEDICAL STAFF OPERATING ON THE FLOAT .3 TWO PEOPLE WITH A FULL WHEEL BARROW "A HUM DAINGER" .4 BACK TO SCHOOL, MAN AND WOMEN IN SCHOOL UNIFORM .5 PHOTOGRAPH OF CLUNES CARAVAN PARK 1/04/1972caravan park, back to school, clunes parade 1972 -
Ballarat Tramway Museum
Photograph - Black & White Photograph/s - set of 2, post June 1973
Yields information about the construction of the track and depot fan c 1972.Black and white photographs of the construction of the access track and depot fan at the new BTPS depot, involving he carting of gravel etc in wheel barrows. The poles have been positioned and the track extended over the level crossing indicating 1973, prior to the installation of one road. See - 1972 - 73 Annual Report page 3 for a list of dates.trams, tramways, depot, btps, construction -
Ballarat Tramway Museum
Photograph - Digital image, Wal Jack, 1/05/1951 12:00:00 AM
Yields information about Ballarat 's No. 23 operating as the Gold Tram in 1951 and its storage in the depot when not in use.Digital image from the Wal Jack Ballarat Album of No. 23, as the Gold tram in the depot 1-5-1951. Photo by Wal Jack. Has wheel sets on the track in front of the tram. See image i2 for rear of photograph. See image i3 for hi res scan of print. See image i4 for hi res scan of negativeWritten on rear in ink "SEC Ballarat, No.23 inside depot 1-5-51 Gold Centenary tram, first time car fully illuminated, especially to take photograph." and the Wal Jack stamp in the bottom right hand corner with the number "T5/PC" written in.trams, tramways, gold tram, depot, tram 23 -
Melbourne Tram Museum
Document - Instruction, Melbourne & Metropolitan Tramways Board (MMTB), "MMTB Tram Car Braking on Greasy Rails", 1/05/1975 12:00:00 AM
Instruction - printed on both sides of a sheet cut to fit into Rule Books, titled "MMTB Tram Car Braking on Greasy Rails", signed by R. C. Drummond Traffic Manager 1/5/1975. Gives instructions about braking, use of sand, conditions, skidding, wheel flats and braking distances. See also 3652.1 for another copy.trams, tramways, drivers, braking, instructions, tramcars, training -
Melbourne Tram Museum
Badge, ATEA (Tramways Union), c1920
The Union commenced as the Australian Tramway Employees Association in 1910. Changed its name in 1934 to the "Aust Tramway & Motor Omnibus Employees Association" so as to incorporate bus drivers of motor omnibuses. Union members were issued with badges to indicate their membership. They were permitted to be worn on their uniforms. See item 5943 for another example. Wearing of Union badges in Brisbane Tramways was a major source of industrial action in 2012 - see "One American too many" by David Burke, published 2012 by the Queensland Museum.Demonstrates a badge issued to members of the ATEABadge - Australian Tramway Employees Association (Tramways Union) badge. Badge made on a brass backing with words "Australian Tramway Employees Association" on outer edge of badge with a royal blue enamel background. In centre of badge has the Australian coat of arms with a railway type spoke wheel above the logo and underneath the coat of arms the words "Federated Australia" in a banner. tramways, trams, badges, personnel, unions, employees, atea -
Bendigo Historical Society Inc.
Photograph - RAILWAYS COLLECTION: A MULTI WHEEL SUPER HEAVY TRANSPORT VEHICLE
Railways Collection - colour photo (part of a series ) of an Unspecified number of Multi wheel Super Heavy Transport Vehicles-all of which appear to be transporting Railway related items. The front vehicle appears to be carrying a partly scrapped Locomotive Diesel engine there is a sign on the front vehicle - 'Danger Long wide Load' and a boy is standing on the step to the Passenger door.photograph, train, diesel -
Bendigo Historical Society Inc.
Photograph - HARRY BIGGS COLLECTION: STEAM TRAM
Copy of a photograph of a stem tram at the fountain in Bendigo. To the right of the photo is a small child wearing a bonnet, there is another person standing near the child, no details are visible. There is a two wheeled hand cart in front of the tram. (Batcheldor photo ?). The words 'Steam Tram Bendigo' are written in ornate script at the bottom of the photo. Just visible below these is written 'with the compliments of the season'organization, public utility, tramways, steam tram -
Ringwood and District Historical Society
Photograph, Ringwood State School -Class photograph - Grade 4C, 1958
Black and white photograph - Grade 4C,1958"Attached to photograph" Back Row- L to R: Brian Witchurch, Evan Pataullock, David Flower, Robert Neave, Peter Gluyas, Robert Gluyas, Gary Cat, Russell Goodall, Douglas Swarbrick, Albert Jones. 2nd Row - L to R: Andrew Radford, Julie Little, Marilyn John, Glenda Bruce, Ruth Reeves, Lois Clark, Carol Regan, Christine Mehannan, Beverley World, Margaret Doak, Susan Appleby, Grant Austin. 3rd Row - L to R: Lester Coulthard, Jennifer Wilford, Elizabeth (?), Alison Clutterbuck, Ruth Reeves, Elaine Evans, Barbara Austin, Helen Taylor, Beverley World, ?, Robyn McLeish, Neil Miller. Front Row - L to R: ?, Dragon Milotic, David Beith, Robert McCulloch, Peter Pavey, ?, Geoff Davis, Gary Addicot, ?. Teacher: Mr Treloar. -
Ringwood and District Historical Society
Photograph, Ringwood State School -Class photograph - Grade 6A, 1956
Black and white photograph - Grade 6A, 1956"Attached to photograph" Back Row- L to R: No names 2nd Row - L to R: Beverley Beattie, Phylis(?), Sandra LeBusque, Pamela Cowan, Lee Tonkin, Pamela Goodall, Noeline King, ?, ?, ?, ?. 3rd Row - L to R: ?, ?, ?, ?, Pauline Villaume, Judy Bower, Pat Saines, ?, ?, Ailsa Ralston, Marion Hayward. Front Row - L to R: No names Teacher: Mr Stuart -
Mont De Lancey
Decorative object - Military Carriages, Chas W Davis, Unknown
The collection of thirteen model horse drawn vehicles were carefully handmade by Mr Chas W Davis 1925 - 2002. He was a talented artist and saw doctor. These models are of single horse drawn military gun carriages and accessories.Three gun carriages: 1. A brown four wheeled wooden model of a gun carriage for military use with a white horse. The carriage wheels have black rims with grey painted spokes. There is a brown storage box at the front for the driver with a brown vinyl padded seat.Three wooden slats form the footrest. A gun cleaning rod and lighter rod are attached to the back of the narrow support tray towards the back wheels. The saddled horse is linked to the carriage by a wooden shaft. A gun carriage is a frame and mount that supports the gun barrel of an artillery piece allowing it to be maneuvered and fired. These platforms often had wheels so that the artillery pieces could be moved more easily. 2. A brown large two wheeled gun carriage with no horse. The wheels have grey painted spokes and black rims. There is a cleaning rod and a lighting rod attached to the carriage shaft near the wheels. An additional accessory is included of a black vinyl saddle with lambswool lining as well as clips for attaching to the horse tack. 3. A grey two large wheeled gun carriage with no horse. The wheels have grey painted spokes and black rims. There is a cleaning rod and a lighting rod attached to the carriage shaft near the wheels. There is a chain to attach the carriage to the horse tack.56 VIR (3rd VIR)military vehicles, military models, gun carriages, military equipment -
Warrnambool and District Historical Society Inc.
Drawing, Working Drawing House & Furniture Making
These sheets were issued with the book ‘The Practical Man’s Book of Things to Make and Do’ published in the 1950s by the Sun News-Pictorial newspaper. The authors were James Wheeler and W. Shum. The sheets provide simple drawings as a guide to making house additions (Summer House etc) and furniture (table desk, newspaper stand, book shelves, utility cupboard, drawer cabinet, corner cupboard). They were intended to be used by the home handyman. These sheets are of no particular historicalinterest but may be useful for display. They are a good example of the plans and information available to home handymen in the 1950s.These are six cream-coloured sheets of paper containing working drawings for making furniture and house additions. The drawings are printed in black and the headings and measurements are also in black print. The six sheets are enclosed in a brown paper folder which is somewhat creased and a little torn. the practical man’s book of things to make and do, home carpentry, warrnambool, history -
Puffing Billy Railway
Malcolm Moore No. 1013 - Four Wheel Diesel Rail Tractor Gauge 2'0", circa Nov 1943
Malcolm Moore No. 1013 Four wheel Diesel Rail Tractor Gauge 2'0" Malcolm Moore rail tractor (Builder’s Number 1013) It was built for the Australian Army in 1943. It was sold to the Inkerman Sugar Mill in Queensland around 1948 for hauling cane and shunting at the works. This rail tractor was originally powered by a Ford side valve V8 petrol engine. It was purchased from the Inkerman Mill of Pioneer Sugar Mills in 1982. Historic - Industrial narrow gauge Railway - Diesel Rail Tractor - used by the Australian Army and Inkerman Sugar Mill in QueenslandDiesel Rail Tractor made of iron and wrought irondiesel rail tractor, puffing billy, inkerman mill, industrial narrow gauge railway, gauge 2’0”, inkerman sugar mill, australian army -
Orbost & District Historical Society
pulley
This pulley was found by Geoff Stevenson, on a beach near Cape Conran (east of Orbost). It probably came from a sailing ship which was wrecked there. Pulleys are simple devices for increasing mechanical advantage in a wire, chain or rope system. A pulley consists of a wheel with a specialized rim that rotates on an axle and carries some type of cable or chain. Ships used a variety of blocks (pulleys) for various tasks, such as stowing cargo or handling the sails. A large wooden pulley encased in iron. It was probably used on a sailing ship. pulley cape-conran sailing-ship maritime -
Melbourne Tram Museum
Document, Melbourne & Metropolitan Tramways Board (MMTB), "R10-495 - Rolling Stock Data", 5/1965
"R10-495 - Rolling Stock Data" dated 11/5/1965 details the tram fleet of the MMTB at the time - listing class, Tramcar numbers, No. in Service, type, capacity seated and crush loading, trucks, wheel and truck centres, motors, Tare Tons, Controllers, Compressors, and length over bumpers. No heritage trams at the time included. The drawing number determined from the MMTB drawing Registers. Signed by F Kirby.Yields information about the MMTB tram fleet in 1965.Photocopy of drawing "R10-495 - Rolling Stock Data" sheetmmtb, tramcars, tramways, data sheet, rolling stock -
Maldon Vintage Machinery Museum Inc
Petrol Engine, Early 20th century
Single cylinder horizontal petrol engine mounted on a 4 wheeled trolley. Two flywheels, one either side, no pulley. Galvanised cylindrical fuel tank mounted on a wooden box in front. Box contains a battery and ignition coil. Trolley has cast iron wheels and is designed for pulling by hand. Painted red and grey. Probably a power source for farm machinery. On a brass plate fixed to the cylinder. "Waterloo Boy Gasoline Engine / No. 81491, HP 4 / Waterloo Gasoline Engine Co. / Waterloo Iowa / Patented / August 7 1900, Dec 3 1901, Oct 7 1907 / Other patents pending / Sold by Waterloo Gasoline Engine Co." On each side of the water tank is an oval white transfer with "Waterloo Boy" above an illustration of a small boy wearing a wide brimmed hat.machinery ... engine ... petrol ... metalwork -
Orbost & District Historical Society
book, The Curlip No : 5, August 2007
This book was compiled after an Orbost Historical Society bus trip to the site of the Prisoner of War Camp at Bete Bolong.This is a locally produced history book which is a useful reference for research into the history of Orbost.A 26 pp spiral bound book with a pale grey cover titled THE CURLIP NO 5, PRISONER OF WAR CAMP, Bete Bolong, Vic. 1943-1946. On the front cover in the top right hand corner is black sketch of a large paddle wheel with the P.S. Curlip in front of it. There is a coloured photograph of the view from the site of the P.O.W. Camp at the intersection of Bete Bolong and Buchan Roads.orbost-history bete-bolong ww11 prisoner-of-war-camp italian-prisoners -
Australian Gliding Museum
Machine - Glider – Sailplane, 1940
The “Coogee” is an intermediate single seat sailplane designed and built by Tom Proctor in 1940. Only one was built. It was first flown at Stuart Hill near Bendigo Victoria in January 1941 and was maintained in flying condition until 1967. The aircraft was flown extensively by the Victorian Motorless Flight Group (now the Melbourne Gliding Club) and Geelong Gliding Club and several subsequent owners. This exhibit is a "one off" Australian designed and built glider similar in some respects to the Hutter H17. Its usage is relevant to the history of gliding in Victoria in the post war years. Also the aircraft provides an insight into gliding technology in Australia in the 1940s. Wood and fabric single seat glider sailplane with strutted wings and strutted tailplane – features metal framed perspex canopy, central fuselage skid and wheel, small tail skid, instruments include airspeed, turn and bank indicator; variometer and altimeter. Metal parts include struts and fairing covering wing joint. All surfaces are pink doped – awaiting painting.australian gliding, glider, sailplane, coogee, tom proctor, victorian motorless flight group, geelong gliding club -
Ballarat Tramway Museum
Functional Object - Tramcar, Melbourne and Metropolitan Tramways Board (MMTB), MMTB Tram No. 661, 1932
Equal wheel (4/ truck) bogie vehicle, drop centre tram car, 2 passenger saloons, with longitudinal seating, drop centre with 4 cross seats, 2 internal sliding doors, 6 passenger doors, 4 drivers doors- external. 2 trolley poles, air braked. Tram 661 Photo by W. F Scott See Destination Citytrams, tram 661 -
Bendigo Historical Society Inc.
Document - DINNER MENU BOARD OF PUBLIC HEALTH, 23/03/1920
Dinner menu printed on cream card . Dinner Tendered by H. A. Sustin, Esq, to the Members and Officers of the Board of Public Health at the Café Francais, Melbourne, 23rd March, 1920. On the inside of the left is a verse and on the right is the menu. On the back are some autographs. Some of the autographs are Austin, Wheeler, E. Robertson. Printed by D. W. Paterson Co. Pty. Ltd, Print, Melbourne.document, dinner menu, a a austin, board of public health, café francais, a wheeler, e robertson -
Melbourne Tram Museum
Drawing, The Met, "Tramcar Data", c1984
Drawing - two A2 sheets, "Tramcar Data", listing all vehicles in use c1984, including A and B class data. Though not numbered similar to drawing X1537 held in the Mechanical drawings. Lists class, numbers, total in service, type, capacity (seated and crushed), Trucks, wheel and truck centres, motors, tare weight, controller, compressor and length over bumpers.trams, tramways, drawings, tramcars, class -
National Wool Museum
Tool - Grinder, 1960-69
Cooper S.E. Ball Bearing Grinder made and guaranteed by Sunbeam Corporation Limited. Grinders like this example have been made the same since the early 1900s, with this grinder thought to have been produced in the 1960s. It is belt driven, with the other end of the belt being attached to an engine; the same engine that would have powered the overhead shearing equipment in shearing sheds. It was common for shearing teams to bring their own equipment, especially pre-1960 as most shearing sheds were not connected to power, and shearers preferred to work with their own equipment. The engines that powered the shears and grinder were typically fuelled with kerosene or petrol. The large circular disks are attached to the bolt that protrudes from the grinder and fastened tightly with a nut. An example of seeing a similar grinder in action can be found on the following link - https://www.youtube.com/watch?v=O7eimI_Gm9o. Inventor Frederick Wolseley made the world's first commercially successful power-shearing system in Australia in 1888. US company Cooper, which had been founded in 1843 as a maker of sheep dip, began selling Wolseley equipment in the USA in 1895. The Chicago Flexible Shaft Company successfully entered the power-shearing market a few years later and entered a joint venture with Cooper. It set up a branch in Sydney and sold shearing sets, and engines to power them, into the Australian market. In 1921 the US parent company, realising it needed to make products whose sales were not as seasonal as those of shearing equipment, made its first household appliances and branded them Sunbeam. In 1933, changes in exchange rates and taxes led the company to manufacture engines and shearing equipment in Australia via subsidiary Cooper Engineering, which changed its name to Sunbeam in 1946. Although most Australians know of this company as a major manufacturer of household appliances, its rural division flourished and retained the Sunbeam name for shearing equipment even after it was taken over by New Zealand company Tru-Test in 2001. The grinder is formed from a central arch shaped block of green painted metal. Much of this paint has been lost to age, leaving the grinder in a ‘farm used’ condition with much surface oxidation present. On the front of the arch is a specification plate, reading “Cooper S.E. ball bearing grinder. Made and guaranteed by Sunbeam”. At the foot of the arch, three bolt holes are found for securing the grinder to the base of a solid wooden surface. Two of the bolt holes are found on the front of the grinder, with another found on the rear. From the central arch, a bolt protrudes to the right of the grinder. This large bolt is for securing a grinding plate to the grinder. Above the central arch is a pendulum which holds the comb / cutter that is being sharpened. From the pendulum, a large arm extends down (not pictured) to meet and strike the plate spinning at a rapid speed. On the left-hand side of the central arch of the grinder, a wheel is found which a belt is attached to for power. This belt is then attached to a separate engine, spinning the wheel and hence powering the grinder. The wheel is partially covered with a section of protective bent tube, designed to provide protection from the rapidly spinning wheel. Below this wheel is the belt shifter. It is designed to move the protective bent tube from one side of the grinder to the other, to accommodate the grinder in the setup of different shearing sheds. The two separate grinding plates are identical. They have a slight slope for sharpening the comb and cutters in the correct method, with a slight bias towards the base, or “tooth”, of the equipment. The disks have a large central bolt for attaching to the grinder. They have tags on the horizontal axis of the grinding plates, for securing the plates in transportation, and to help with initial alignment when setting up the grinder. The reverse of these grinding plates has the same green painted metal finish found on the grinder. This paint is also in a ‘farm used’ condition, with surface oxidation present. The grinder would be provided from the factory with a comb holder, shifter for securing the grinding plates, emery cloth and emery glue. The emery cloth is what does the actual grinding and is applied to the grinding disks, replacing once well worn. These items can be seen in the final images in the multimedia section, showcasing advertising for this grinder. Plate. Inscribed. “Cooper / S.E. BALL BEARING GRINDER / MADE AND GUARANTEED BY / Sunbeam / CORPORATION LIMITED / SYDNEY MELBOURNE / ADELAIDE BRISBANE ”sheep shearing, shearing equipment, sunbeam, grinder -
Mission to Seafarers Victoria
Magazine (item) - Newsletter, Mission to Seafarers Victoria, Ship to Shore , Issue Autumn 2002, November 2001
Ship to Shore was first printed in 1997. Inspired by the Jottings From Our Log, this modern version is generally published quarterly (Summer, Autumn, Winter, Spring) Articles are written by the mission's staff and give updates about shipping and seafaring news, staff, events, board Committee, heritage. It is sent by post or email to supporters, members, volunteers and friends of the mission. It is also available to the public in the Flying Angel club and online on the website. 23 February 2002: Reunion of Harbour Lights Guild former volunteers thanks to the work of Maria Culka: Enid Budds, Beverley Kent. CD-ROM: Marine births, deaths and marriages 1853-1920 Ron Reid, great grandson of Hugh Reid, visited the mission after seeing the ABC News report in October 2001. In October: ABC News talks about the Mission. Ship to Shore is a valable source of informationship to shore, mission to seamen, mission to seafarers, flinders street, melbourne, victoria, news, events, seafaring life, shipping, sailors, seamen, sponsors, marketing, flying angel, staff, chaplains, community, welfare, board members, 1998, portland mission, hastings mission, noyoun park, ted cosens, statistics, sea sunday, 2001, bill romney, reverend bishop jeremy ashton, nigel porteous, shipping sector, keith dann, roy hope, geelong mission, international year of volunteers, lhlg, ladies harbour lights guild, heritage, judy douglas, noah park, donors, volunteers, maria culka, hlg, beverley kent nee oliver, ro kent, pat dann, abc news, betty ashton, xmas, christmas, joan leslie, ron reid, elizabeth fiddian, barbara bedford, reverend bill dalling, joy stanfield, lal simpson, audrey adderson, gwynne scott, pauline moye, marjorie duckett nee maclennan, three faithfuls, padre frank leslie oliver, bdm victoria -
Ballarat Tramway Museum
Photograph - Colour Photograph/s - set of 12, Jenny Puls, 13/03/1996 12:00:00 AM
Set of twelve colour photographs of the derailment of Tram No. 18 on the depot fan (2 and 3 road points) on 13 March 1996. Included within the cataloguing sheet are a copy of the report to the traffic manager and the envelope from Frank Puls. Photographs by Jenny Puls, on Kodak paper. The report is a photocopy of the original held by the Traffic Manager. .1 - Frank standing by No. 18 .2 - No. 1 end showing derailed wheel .3 - From the south side .4 - Close up photo showing marks on rail from the wheel. .5 - From the north side .6 - Dave Macartney locating jacks .7 - Looking west towards the depot .8 - From the northside during rerailing .9 - Alan Snowball holding towbar with 661 in the background .10 - 18 and 661 .11 - Being coupled to No. 38 .12 - Being towed back on with Alan Snowball observing. On rear of each photo in stamped in black ink "13 March 1996"accidents, btm, derailments, depot fan, tram 18, tram 661, tram 38 -
Ballarat Tramway Museum
Ephemera - Envelope/s, Australia Post, "Ballarat Scout Jamboree, Scout Tram Carried Cover", 21/08/2007 12:00:00 AM
Has a strong association with the 1992 Ballarat Scout Jamboree and demonstrates the types of souvenirs produced for the event.Set of two envelope printed and stamped to celebrate the 1992 16th Australian Jamboree, Ballarat Vic, dated 7/1/1992. .1 - Has preprinted "Australia Post Souvenir Cover" with stamps for "Carried on Scout Vintage Tram No. 27", a 2nd stamp featuring a four wheel tram and a cancellation stamp over a $0.45 machine stamp. Preprinted by Australia Post. Stamps in black and purple ink. .2 - Has preprinted montage of Australian stamps, with stamps for "Carried on Scout Vintage Tram No. 661", a 2nd stamp featuring a four wheel tram and a cancellation stamp over a $0.45 machine stamp. Preprinted by Australia Post. Stamps in light blue ink. Purchased by W. Doubleday through e-bay 18-7-2007. From Ronald Alexander, 1st class collectables, Bakery Hill for $14 including postage. Bid confirmation sheet with worksheet. trams, tramways, scout jamboree, envelopes, australia post, stamps -
Bendigo Historical Society Inc.
Legal record - R.S.S.A.I.L.A Bendigo documents
10559a Letter to Mr. G.V. Lansell, Mr. R.F. Hyett and Mr. G.R. Wheeler, authorizing the Trustees of the Bendigo Sub-branch of R.S.S.A.I.L.A. Building and Patriotic Fund to complete the purchase of a property in Mackenzie Street Bendigo, and authorizing the Trustees to borrow £2000 to complete the purchase. Dated 19 June 1950. Letter from Solicitors Hyett. Willis and Hyett. 10559b Indemnity agreement for five members of the Bendigo Sub-branch of The Returned Sailors' Soldiers' and Airman's' Imperial League of Australia Victorian Branch ( R.S.S.A.I.L.A.) dated 22 December 1950, in relation to the purchase of (11) McKenzie Street, Bendigo and borrowing £2,000 from the Commonwealth Bank to complete a property purchase. The members being Mr. George Victor Lansell, Mr. Frederick Eustace Jackson, Mr. John William Swatton, Mr. George Robert Wheeler, and Mr. Augustus John Skehan. r.s.s.a.i.l.a bendigo branch, mackenzie street -
Bendigo Historical Society Inc.
Newspaper - VICTORIA QUARTZ - PHOTOGRAPHS OF MINING
Four photographs from a Supplement dated Thursday, November 14, 1901. Top photo is a picture of the Victoria Quartz poppet legs, buildings and a large chimney. The second photo is a puddling machine. In the photo is a circular area with water in it and an island in the centre with a log across it. A horse is harnessed to one end of the log. There is a man behind the horse and a dray in the background. The third photo is a whip. It is a pole held at an angle by two smaller poles. At the top is a wheel. There is a rope over the wheel with a bucket on the end. There are two men to the right of the whip. The bottom picture is a man dollying. He has a half barrel and he is working the water with a short pole with a handle on each side. The barrel has a drainage pipe in the bottom. There is also a dish, two buckets and a shovel around the barrel. There are two photocopies of the page. One didn't get all the fourth picture copied.photo, victoria quartz, victoria quartz, photographs of mining, puddling machine, whip, dollying -
Royal District Nursing Service (now known as Bolton Clarke)
Photograph - Photograph, sepia, c.1920
A public appeal was made to raise funds for Melbourne District Nursing Society (MDNS) so motor cars could be purchased to assist their Trained nurses, known as 'Nurse' in those days, with their visits during the Spanish Influenza epidemic of 1919. With donations from businesses and individuals four cars were available within a month, and this photograph shows two of them In 1919 parked outside 'Floraston', 39 Victoria Parade, Collingwood, which was the first MDNS Headquarters and Nursing Home purchased by the Society. The MDNS uniform was a grey cotton frock with white collar, a grey coat with lapels, and a grey brimmed hat with a red Maltese cross in the centre of the hatband. From its founding in 1885 until 1891 the Trained nurses, known as 'Nurse' in those days, of the Melbourne District Nursing Society (MDNS) worked from their own homes which were located in the vicinity of their areas (districts). In November 1891 MDNS was able to rent a two story terraced house at 66 Cardigan Street, Carlton, at £65 a year, which contained accommodation for three Nurses and one pupil nurse as well as being used as their Headquarters. They left from their Nurses Home each morning and returned at the end of their shift to write up their book work before retiring for the day. Three years later they moved into a larger terraced house at 49 Drummond Street Carlton which was rented at ‘a very moderate rental’. There was a Board room, apartments for the Nurses and pupil nurse, a large dispensary which patients could attend each evening to have prescriptions signed and bottles refilled with ‘homely remedies’ and elixirs, which were administered to for e.g. Consumptive cases. Doctor’s prescriptions were filled at the Pharmacy. Cupboards containing donated blankets and bedclothes for needy patients were kept in this room, and it was here where the Nurses kept their nursing bags which were refilled at the end of each shift ready for any emergency and for the next day. A list of Doctors the Nurses could call was kept by the telephone. The home also had a kitchen where nourishing soup was made and distributed twice a week to the needy. Milk was also distributed when needed. In 1902 they moved into rented premises at 188 Leicester Street, Carlton and two years later, in 1904, to premises at 5 Royal Terrace, Nicholson Street, Fitzroy. They remained there for ten years. In June 1914 at last the Society had sufficient funding to purchase their own terraced premises, ‘Floraston’ 39 Victoria Parade, Collingwood which was their Headquarters and Nurses Home. In 1926 the After-Care Home for recovering patients, (later called After-Care Hospital) was built by the Society next door, running from 41-47 Victoria Parade (became No. 45); the District nurses continued to live at No. 39. District Nursing has had various modes of transport over the last 130 plus years. At first, from 1885 as Melbourne District Nursing Society (MDNS), the Nurses walked the streets and lane ways amid the slums of central Melbourne. As the Society expanded public transport was used, and bicycles were bought by the Society in 1903 and used in inner areas until 1945. During the Spanish flu epidemic, in 1919, MDNS appealed for assistance to procure Motor vehicles so the Nurses could visit an influx of cases. Through trusts, grants and donations four 'Ford 'T Model' cars were procured which enabled the Nurses to triple their visits. Through constant use the cars were in such a poor state they were sold in 1927. A Motor Auxiliary was formed in 1929 to take Trained nurses, now called 'Sisters' to patients, and some Sisters used their own cars; even a motorcycle was used by one Sister in 1933. All these forms of transport were intermingled until MDNS and, having received Royal patronage, the now named Royal District Nursing Service (RDNS) had its own full fleet of vehicles.Sepia photograph on grey mounting board depicting four Melbourne District Nursing Society (MDNS) Trained nurses (Nurses) sitting in two motor vehicles in front of Melbourne District Nursing Society Headquarters and Nurses Home. In the foreground are the two Ford Model T vehicles with their soft hoods open. Each car has four spoked wheels. A frame where a spare wheel is attached can be seen attached to the rear car's running board. A spare wheel, with white tyre, can be seen standing up resting against the middle of the front car; the lower section of the tyre is sitting on the running board. The steering wheel can be seen on the right hand side of both cars with a Nurse sitting behind it with her hands resting on the wheel. The upper part seen of the two MDNS Nurses in each car shows they are wearing grey uniform coats over their frocks, the white collars of which can be seen. They are all looking at the camera, and are wearing grey hats with a central Maltese cross on the white hatband. Behind the cars the footpath and the metal spiked fence, with a square concrete columns at either end can be seen. '39' is near the top of the left hand column and a white oblong name plate is attached to the fence. On the far right of the photograph a wooden gate runs from the column. A dark name plate is attached with the words 'Patient Entrance' / - 'Melbourne District Nursing Society -/ For Nursing the Sick Poor'. Behind this are a row of shrubs forming a hedge and behind this the two storey terrace building with its three arched arcade veranda on the ground floor and three long widows on the top floor with a veranda with a metal scrolled safety rail. The building has a flat roof with a central raised section with 'Floraston', written in capital letters on it. XJ. 13. is written in black ink on the bottom right corner of the photographPhotographer's stamp on mounting boardmelbourne district nursing society, mdns, transport, nurses home, rdns, royal district nursing service -
Eltham District Historical Society Inc
Newsletter, No. 214 January 2014
Contents: • New Newsletter Format • 2013 Eltham Festival • The Grinding Wheel • Next Meeting • Heritage Excursion • February Meeting • Book Launch – A History of Saint Margaret’s Church Eltham • Annual General Meeting • 2014 Program • Research Sate School; the missing Honour Board by Jim Allen • From Mount Morenzie to Milparinka by Maureen Jones • Incorporation Matters • A Pleas from Harry Gilham • And Also • Contacts for the Eltham District Historical Society The Shire of Eltham Historical Society was formed in October 1967. The first newsletter of the Society was issued May 1978 and has been published continuously ever since on a bi-monthly basis. With the cessation of the Shire of Eltham in late 1994, the Society's name was revised to Eltham District Historical Society and this name first appeared with issue No. 103, July 1995. The collection of the Society's newsletters provides a valuable resource on the history of the Society's activities, office bearers and committee members, guest speakers and subjects of historical interest pertinent to the former Shire of Eltham and the Eltham District.A4 photocopied newsletter distributed to membersnewsletter, eltham district historical society, shire of eltham historical society -
The Beechworth Burke Museum
Photograph, c1900
Believed to have been taken sometime between 1858 and 1908, featuring a man with moustache, dressed in hat and long riding coat, seated on a bob-tailed horse, is stopped in the middle of a wide dirt road in Beechworth. He is outside a row of businesses, including R.McKenzie & Sons Grain Store and Mackenzie Family Store (Wholesale & Retail Est. 1855), along a sloping hill. Behind the main rider are a parked horse and laden two-wheeled cart backed up directly outside the grain store's verandah, and another man is driving a horse and four-wheeled wagon forward towards them. At the bottom of the hill is a bridge (Newtown Bridge) with forked road on the far side, leading to a number of houses on both sides of another hill. This image is looking down Bridge Street, Newtown, Beechworth and across to Ford Street (left) and High Street (right). Road-making was a focus of town development during the 1850s, and the wide streets were created on the instructions of the surveyor-general to be between sixty-six and ninety-nine feet wide to give the town a pleasing aspect.This photograph is important in showing the development and expansion of the various businesses and buildings in Bridge Street of Newtown, Beechworth. Black and white rectangular photograph printed on paperReverse: 6980/ PH 118/ 1998.00059/beechworth, new town, newtown, newtown beechworth, local business, mackenzie family store, mackenzie's family store, mackenzie, grain store, bridge, ford steet, high street, colonial australia, australian gold rushes, mining technology, beechworth historic district, indigo gold trail, migration, indigo shire, mckenzie and sons grainstore, mckenzie family store, mckenzie, newtown bridge