Showing 2906 items
matching bodied
-
Deaf Children Australia
CALAID V - Hearing Aid, National Acoustic Laboratories, Early 1980s
The first all transistor hearing aids appeared in 1953. They were created to replace vacuum tubes; they were small, required less battery power and had less distortion and heat than their predecessor. The vacuum tubes were typically hot and fragile, so the transistor was the ideal replacement. The size of these transistors led to developments in miniature, carbon microphones. These microphones could be mounted on various items. There were body hearing aids where the earpiece was connected to the hearing aid and battery pack worn on the body. Ear level hearing aids consisted of eyeglass, behind the ear (BTE), in the ear (ITE), and in the canal (ITC, CIC) hearing aids. A new aid type, the Calaid V, was introduced featuring a forward facing microphone, and three potentiometers for adjustment of maximum gain, maximum power output, and low frequency roll off. The Calaid V was introduced in the early 1980s and remained the most frequently used aid in NAL's service for the next ten years (From: THE CALAID: AUSTRALIA'S OWN HEARING AID by Laurie Upfold and Ray Piesse Single Behind-the-ear hearing aid. Provided and manufactured by the NAL (National Acoustic Laboratories), part of the Commonwealth Department of Health. "CALAID/V" on bottom face -
Deaf Children Australia
Hearing Aid, British Hearing Aids (Aust) P/L, Universal Hearing Aid, "1970s? When small watch batteries came in.??
The first all transistor hearing aids appeared in 1953. They were created to replace vacuum tubes; they were small, required less battery power and had less distortion and heat than their predecessor. The vacuum tubes were typically hot and fragile, so the transistor was the ideal replacement. The size of these transistors led to developments in miniature, carbon microphones. These microphones could be mounted on various items. There were body hearing aids where the earpiece was connected to the hearing aid and battery pack worn on the body. Ear level hearing aids consisted of eyeglass, behind the ear (BTE), in the ear (ITE), and in the canal (ITC, CIC) hearing aids. A Universal hearing aid supplied by Angus & Coote Hearing Aids. Universal Hearing Aids were manufactured by British Hearing Aids (Aust) P/L. Includes ear mould for right ear. In a teal leather box. ""Universal"/Mod 73-824" on back of pack. "Angus & Coote/HEARING AIDS" on inside of case. -
Deaf Children Australia
Hearing Aid, Hearing Aid from Myer Hearing Service
The first all transistor hearing aids appeared in 1953. They were created to replace vacuum tubes; they were small, required less battery power and had less distortion and heat than their predecessor. The vacuum tubes were typically hot and fragile, so the transistor was the ideal replacement. The size of these transistors led to developments in miniature, carbon microphones. These microphones could be mounted on various items. There were body hearing aids where the earpiece was connected to the hearing aid and battery pack worn on the body. Ear level hearing aids consisted of eyeglass, behind the ear (BTE), in the ear (ITE), and in the canal (ITC, CIC) hearing aids. Tan plastic case hearing aid, with wire, ear piece and ear mold with metal clip. Made in England and sold by Myer Hearing Service. "MYER/HEARING SERVICE" engraved in gold on case. "MADE IN ENGLAND" on bottom of case. deaf children australia, hearing aid, myer hearing service -
Deaf Children Australia
Zephyr Hearing Aid, Estimated date: early 1950s
The first all transistor hearing aids appeared in 1953. They were created to replace vacuum tubes; they were small, required less battery power and had less distortion and heat than their predecessor. The vacuum tubes were typically hot and fragile, so the transistor was the ideal replacement. The size of these transistors led to developments in miniature, carbon microphones. These microphones could be mounted on various items. There were body hearing aids where the earpiece was connected to the hearing aid and battery pack worn on the body. Ear level hearing aids consisted of eyeglass, behind the ear (BTE), in the ear (ITE), and in the canal (ITC, CIC) hearing aids.Cream plastic hearing aid with metal back. Takes 3 batteries and there is a piece of paper in the battery case advising 'CAUTION'. Two round knobs on top, 'ON/OFF' and the other I assume is Volume. There is a plastic tag for attaching to a button (probably), headphone sockets. The front is metal lacework with a scrolled 'Z'"Z" on front. "ZEPHYR/HEARING AID/2546" on back. "U C"/"M"/"7777" on inside battery case.deaf children australia, hearing aid, zephyr hearing aid -
Wodonga & District Historical Society Inc
Album - Ringer's River by Des Martin - Plate 32 - The shooting of Nugent
Advised of the tragedy by one of the stockmen Ellen O'Hara drives the gig towards Overton, but meets Klinberg who tells her the police have found a body near Nugent's place. Ellen gets there as Nugent is pulling Keiran's body from the river. Shock grief, and old bitternesses unhinge her mind. Seizing Trooper Ryan's pistol from on top of his clothes she shoots Nugent dead, and bolts up a rough back track towards her home with the police in pursuit. Her pony falls while belting along a narrow, dangerous piece of the track, and the gig goes over a cliff. Ellen is killed.The album and images are significant because they document literature written by a prominent member of the Wodonga community. The presentation of this precis was supported by several significant district families and individuals.Ringer's River Album Coloured photo Plate 32des martin, many a mile, ringer's river, northeast victoria stories -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Tool - Instrument steriliser used by Dr Mitchell Henry O'Sullivan, c. 1907
This type of steriliser was in use from approximately 1907 onward. Designed for surgeons who frequently moved from hospital to hospital. The body and lid of the steriliser were made from one continuous piece of metal to produce a germ-free surface. Dr Mitchell Henry O'Sullivan worked in the Victorian country town of Casterton as a general practitioner from 1919 until his death in 1977. He also practiced obstetrics. His son, Dr David More O'Sullivan donated his obstetric bag and its contents to the College in 1999. The bag and contents are a unique time capsule of the type of instruments and pharmaceuticals used in the inter-war period.Metal instrument steriliser. Consists of a rectangular metal container with lid, an internal metal tray, and two spirit burners. The lid has a small wire handle at either end. The internal tray also had two handles and in perforated with holes to allow for drainage. The upper edge of each burner has a series of eighteen holes in the rim. disinfection -
The Beechworth Burke Museum
Animal specimen - Flying Fox, Trustees of the Australian Museum, 1860-1880
There are 62 species of Flying Foxes or "Fruit Bats" globally, with 3 existing in Australia: the grey-headed, the little-red, and the black. Flying Foxes are nocturnal, social and herbivorous animals. They can weigh up to 1kg and live up to 30 years. In Australia, Flying Foxes occupy a range from Bundaberg in Queensland to Geelong in Victoria. Most species are listed as endangered or vulnerable. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum and the National Museum of Victoria, as well as individuals such amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century. The specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia's fauna history existed in the past and are potentially important for future environmental, climate and conservation research.Small sized flying fox with a pointed head, curved body, bushy tail, and curved claws perched on a wooden mount. The pelage is thick, long and silky in pale caramel and tan shades. The head is small with two pointed ears, two glass eyes, and about five teeth.On wooden mount: BMM5895 /taxidermy mount, taxidermy, flying fox, fruit bat, burke museum, australian museum, skin, reynell eveleigh johns, natural history, animal -
Bendigo Military Museum
Instrument - BUGLE WW1, Mathias Road, 1914
WWI Army Bugle has Australian Commonwealth Military Force Rising Sun Badge with a copper letter A fixed beside the Rising Run. Main body is made out of copper, the muzzle & breech are brass. The rear arve has a brass outer plate. The lip nozzle is missing.“Mathias Rd London N. 1914” Some non sensical letters scratched onto brass muzzle.musical instruments - wind, metalcraft - copper - brassware, military history, bugle -
Orbost & District Historical Society
bag
Rectangular natural coloured flax bag. Body of bag made of flax string woven into a loop pattern with chain stitch in white cotton thread, edged with flax string fringe. It has a small woven carrying strap. The edges have been left loose to obtain a frill.bag maori flax handcraft ethnographic -
Tatura Irrigation & Wartime Camps Museum
Photograph - copy, 1988 copy
Photographed at Exhibition of Camp memorabilia displayed at Temper Home for Aged, Bayswater, Victoria, in 1981.Colour photograph. Hand carved woodwork and dolls. Tools and planes, toys, fretsaw work cradle, dolls bath with ladle and fairy tale figures - inlay work. Doll on top of jewel box has hand carved head and limbs and a stuffed cloth body. Negative no 4.tools, wood work, fret work, hand carved, dolls, inlay work, pow, camp internees -
Tatura Irrigation & Wartime Camps Museum
headwear - Beret, German Army Uniform
German Army Uniform circa WW11Worn by German soldierKahki beret (hat) , band features a badge , kahki diamond with black, white and red bullseye type circle. Body of beret ( front centre) has the Nazi blue eagle and swastika ensignia. Metal rivet air holes one on each side. Red cotton lining. beret, hat, headgear, uniform, german army uniform -
Victorian Aboriginal Corporation for Languages
Map, Geographic Data Victoria, Vicmap topographic map index as at June 2000, 2000
Index to Vicmap topographic mapping, including 1:25 000 and 1:50 000 topographic maps, and Outdoor leisure series, compiled by the earlier bodies, Survey &? Mapping Victoria, etc. Also indexes Royal Australian Survey Corps' 1:50 000 topographic mapping.mapsvictorian maps, topographic maps -
Hume City Civic Collection
Straight Jacket
Straight jacket: two layers of fawn cloth-canvas (or hessian). No sleeves or armholes; shaped at shoulder to enclose arms against body. Hand sewn with heavy thread. (String or twine). Closes with six pairs of eyelets, all overstitched with same twine (which seems to have a coating).Nonecostume, sunbury asylum, george evans collection -
Hellenic Museum
Amphora, 750 - 600 BCE
Cypriot White Painted Ware from Cypro-Archaic PeriodThe inside of the rim and the round of the mouth are painted. The neck has two friezes of circles separated by lines, two bands above and below and a set of lines on the shoulder. The body has columns of concentric circles painted between the twin-looped handles, another set of horizontal lines below. cypriot -
Flagstaff Hill Maritime Museum and Village
Functional object - Dry Measurement Container, Late 18th to early 19th century (before the standardised measurement was introduced in England in 1824)
The peck has been in use since the early 14th century when it was introduced as a measure for flour. The term referred to varying quantities until the modern units of measurement were defined in the 19th century. Cities in England used to have official standard weights and measures for that city or area. These containers were marked with the city's name and emblem, merchant’s weights and measures would then be checked against this to make sure they weren't trying to cheat their customers. The item in the collection is a standard measure approved by Bristol City and used by that City’s grocers to measure dry goods such as peas, beans, sugar, flour, meal etc., and its metal banding ensures that the measure cannot be reduced in size to cheat customers. Additional Information: The British Imperial System evolved from the thousands of Roman, Celtic, Anglo-Saxon, and customary local units employed in the middle Ages. Traditional names such as pound, foot, and gallon were widely used, but the values so designated varied with time, place, trade, product specifications, and dozens of other requirements. Early royal standards were established to enforce uniformity took the name Winchester, after the ancient tenth century capital of Britain. King Henry VII reaffirmed the customary Winchester standards for capacity and length and distributed royal standards throughout the realm. This process was repeated about a century later in the reign of Queen Elizabeth I. In the 16th century, the rod (5.5 yards, or 16.5 feet) was defined (once again as a learning device and not as a standard) defined by the length of the left feet of 16 men lined up heel to toe as they emerged from the church. By the 17th century usage and legal statute had established the acre, rod, and furlong at their present values together with other historic units such as the peck. Establishment of the System: The Weights and Measures Act of 1824 and the Act of 1878 established the British Imperial System based on precise definitions of selected existing units. The 1824 act sanctioned a single imperial gallon to replace the wine, ale, and corn (wheat) gallons that were in general use. The new gallon was defined as equal in volume to 10 pounds avoirdupois of distilled water weighed at 62°F with the barometer at 30 inches, or 277.274 cubic inches (later corrected to 277.421 cubic inches). The two new basic standard units were the imperial standard yard and the troy pound, which was later restricted to weighing drugs, precious metals, and jewels. In 1963 an act of parliament abolished archaic measures as the rod and chaldron and a metric system was adopted. An early example of a dry measuring container giving a snapshot of how imperial weights and measures developed in England to evolve the British measurement system into the metric arrangement that most countries have adopted today including Australia. It has social significance as an item that was in everyday use by grocers and other merchants to measure dry goods in the late 18th to early 19th centuries and used specifically in the Bristol region of England as an officially recognised measurement.Wooden measurement container with iron banding and hand made rivets container is a Quarter Peck official measurement container. Inscriptions are impressed into the sides of the wooden body. The container has the official crown and emblem of the City of Bristol, indicating this item was the Bristol City standard quarter peck measurement.Impressed into the timber on the front, a crown emblem over "C B G / CITY OF BRISTOL / QUARTER", on one side "HALF" , another side "PECK". Handwritten in white chalk on the base is "1458"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill-maritime-museum, flagstaff-hill-maritime-village, weights and measures, quarter peck, measurement container, dry grocery measure, bristol city measurement standard, city of bristol, british weights and measures, 18th and 19th centure standard measures -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, 1850's - 1900
This bottle is sometimes referred to as a black glass 'Gallon' bottle. It is used for storing and transporting liquor such as port or madeira. Glass bottles and glass jars are in many households around the world. The first glass bottles were produced in south-east Asia around 100 B.C. and the Roman Empire around 1 AD. America's glass bottle and glass jar industry were born in the early 1600s when settlers in Jamestown built the first glass-melting furnace. The invention of the automatic glass bottle blowing machine in 1880 industrialized the process of making bottles. In 2019, plans were made to re-introduce milk glass bottle deliveries to Auckland in early 2020. The earliest bottles or vessels were made by ancient man. Ingredients were melted to make glass and then clay forms were dipped into the molten liquid. When the glass cooled off, the clay was chipped out of the inside leaving just the hollow glass vessel. This glass was very thin as the fire was not as hot as modern-day furnaces. The blowpipe was invented around 1 B.C. This allowed molten glass to be gathered at the end of the blowpipe and blown into the other end to create a hollow vessel. Eventually, the use of moulding was introduced, followed by the invention of the semi-automatic machine called the Press and Blow. In 1904 Michael Owens invented the automatic bottle machine. Before this time most glass bottles in England were hand blown. This is one of four bottles in Flagstaff Hill Maritime Museum collection that were recovered by a local diver from the quarantine area just inside the Port Phillip Heads. Ships were required to pull into this area to check for diseases and other medical issues before they could head up to Melbourne. Quite often they would drink and throw the bottles overboard. Handmade glass bottle, manufactured in the 1850s. The bottle gives a snapshot into history and a social life that occurred during the early days of Melbourne's development and the sea trade that visited the port in those days. Bottle, glass, solid dark purple (black), round, matt surface. Glass ring below mouth, neck is slightly bulbous, body tapers slightly inward from shoulder to base. Base is concave with pontil mark. Bottle has no inscription. Generally used for storing port.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, handmade bottle, handmade english beer bottle, pontil bottle, black glass, gallon, purple bottle, ale bottle, porter bottle -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, c. 1840s - 1870s
This green glass bottle has been handmade from about the 1840s to 1870s. The bottle, possibly used to store or soda or mineral water, was found in the coastal waters of Victoria. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe into the molten glass blob at the end of the pipe. The glass was blown out to fit into the shape of the cylindrical dip mould. Once it hardened, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck while carefully using a tool to hold the base. A 'ponty' tool would have been used to form the shallow base. The mouth of the bottle was cut off from the blowpipe and a piece of soft glass would be added to the mouth to then form the lip. Bottles like this would usually be sealed with a cork.Although this bottle is not linked to a particular shipwreck, it is recognised as a historically significant example of handmade, 1840s to 1870s beverage bottles imported for use in Colonial Victoria. The bottle is also significant for its association with John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several shipwrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, green glass. Applied blop lip, deep scratch on neck. Shoulder seam, body tapers inward towards base. Wide heel, shallow base. Glass has ripples, creases, scratches and has a rough surface on the outside on one side. Sediment inside bottle.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, collectable, bottle, dip mould, soda bottle, beverage bottle, green glass -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, c. 1840s - 1870s
This olive green glass bottle has been handmade from about the 1840s to 1870s. The bottle, possibly used to store ale or soda or mineral water, was found in the coastal waters of Victoria. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe into the molten glass blob at the end of the pipe. The glass was blown out to fit into the shape of the cylindrical dip mould. Once it hardened, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck while carefully using a tool to hold the base. The base was made using a 'ponty' tool to push it up, giving a concave finish with a central 'ponty' mark. A tool would have been used to cut off the bottle from the blowpipe and a piece of soft glass would be added to the mouth to then shape the band collar. Bottles like this would usually be sealed with a cork, which may have been held in place with wax or wire and tape. Although this bottle is not linked to a particular shipwreck, it is recognised as a historically significant example of handmade, 1840s to 1870s beverage bottles imported for use in Colonial Victoria. The bottle is also significant for its association with John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several shipwrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, olive glass, cork top style. Roughly applied tooled lip with band, smooth body outline tapering intwards towards base. Concave base, small pontil mark, uneven base. Glass has rippled, circular blow lines. Sedimint inside bottle.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, collectable, dip mould, soda bottle, beverage bottle, olive green glass -
Warrnambool and District Historical Society Inc.
Book, Ambulance corps hand book, 1910
This book, published in New South Wales in 1910, is a handbook for ambulance personnel. It belonged to ‘J. Brennan’ but this person has so far not been identified. This book is of strong antiquarian interest but its significance to Warrnambool and district has not yet been established. This is a brown leather-covered book of 275 pages. The front of the cover has gold lettering. The book has a preface, 18 chapters with many illustrations and an index. The inscription is handwritten in black ink. There is one fold-out page showing the arteries of the body. The cover is somewhat scuffed on the edges. ‘J.Brennan’ ambulance handbook, j. brennan -
Warrnambool and District Historical Society Inc.
Bottle, The Perfect Agee Feeding Bottle, Mid 20th century
This baby’s feeding bottle was made by Agee (Australian Glass Manufacturers) and marketed by the Crown Crystal Glass Company. It is made of pyrex which is a brand of glass first produced by Corning Inc. of America in 1908. Pyrex is a clear low-thermal-expansion borosilicate glass used for laboratory glassware and kitchenware. The use of pyrex bottles became more prevalent in Australia in the second half of the 20th century and baby’s bottles made of pyrex were popular as they were easily sterilised in the home environment. This baby’s bottle has no known local provenance but it is retained because it is a good example of the advancement in infant health and welfare over the past 80 years. This is a baby’s feeding bottle made of glass (pyrex). The body of the bottle is hexagonal-shaped (circular with rounded edges). It has a circular-shaped neck and an open top with a moulded glass around it. The bottle has no feeding nipple or stopper. There are measurement marks on the side of the bottle up to 8 ounces. ‘The Ideal Agee Pyrex Feeder’ ‘AGM 1S 1561 6’ infant welfare, history of warrnambool -
Warrnambool and District Historical Society Inc.
Bottle, Feeder Bottle Pyrex, Mid 20th century
This baby’s feeding bottle was made by Agee (Australian Glass Manufacturers) and marketed by the Crown Crystal Glass Company. It is made of pyrex which is a brand of glass first produced by Corning Inc. of America in 1908. Pyrex is a clear low-thermal-expansion borosilicate glass used for laboratory glassware and kitchenware. The use of pyrex bottles became more prevalent in Australia in the second half of the 20th century and baby’s bottles made of pyrex were popular as they were easily sterilised in the home environment. This baby’s bottle has no known local provenance but it is retained because it is a good example of the advancement in infant health and welfare over the past 80 years. This is a baby’s feeding bottle made of glass (pyrex). The body of the bottle is hexagonal-shaped (circular with rounded edges). It has a circular-shaped neck and an open top with a moulded glass around it. The bottle has no feeding nipple or stopper. There are measurement marks on the side of the bottle up to 8 ounces.‘The Ideal Agee Pyrex Feeder’ ‘AGM 1S 1561 6’ infant welfare, history of warrnambool -
Warrnambool and District Historical Society Inc.
China, Vase, 1930s
This is a souvenir vase produced for the tourist trade in Warrnambool. The vase was made by Victoria China in Czechoslovakia and the image of the Warrnambool War Memorial has been added for sale in Warrnambool. Similar items with suitable illustrations would have been produced for the tourist industry for other towns and places in Australia. Tourism has been an important industry in Warrnambool since the late 19th century. This vase is of interest as an example of the souvenirs available to tourists in Warrnambool in the 1930s. It is both a decorative and a useful item. This is a white china vase with an elliptical-shaped body and a circular neck with a wider opening at the top. There is a faint brown-gold colouring on the neck of the vase and this colouring is stronger on the under-side of the top opening, There is a colour illustration of the War Memorial at Warrnambool on the side of the vase. The maker’s name is on the base of the vase. ‘Soldier’s (sic) Memorial, Warrnambool’ tourism in warrnambool -
Warrnambool and District Historical Society Inc.
Bottle, Reeves Warrnambool, Mid 20th century
These bottles come from the Warrnambool aerated waters business of Reg Reeves. A cordial factory was established in Koroit Street, Warrnambool by John Davis and this business was taken over in the 1880s by John Fletcher. Ralph Reeves, who had been involved in the cordial making business in Warrnambool since 1900, bought the Koroit Street business in 1931. His son Reginald John acquired the business in 1946 and was actively involved until his death in 1972. The factory continued until the 1908s. These bottles are of interest as they come from the Warrnambol aerated waters business of Reginald John Reeves. The Reeves cordial factory was prominent in Warrnambool for over 40 years. Cordial manufacturing in Warrnambool was an important industry for over 100 years. These are two clear glass bottles (one has been slightly discoloured inside from the contents). They have a rounded base with a rounded body tapering to a smaller neck. The openings at the top have a lip of moulded glass. The name of the aerated waters manufacturer is impressed into the side of the bottle. There are no stoppers.‘This bottle always remains the property of R.J.Reeves Warrnambool.’ reg reeves, warrnambool, cordial manufacturers in warrnambool, history of warrnambool -
Warrnambool and District Historical Society Inc.
Container - Bottle, Reeves Stopper bottle, 1950s
This bottle comes from the Warrnambool aerated water factory of Reg Reeves. This factory, in Koroit Street, Warrnambool, was established in the 1860s as the Union Cordial Factory by John Davis and then bought by John Fletcher in 1885. Fletcher’s business continued until 1930 when it was bought by Ralph Reeves. Coming to Warrnambool about 1900, Ralph Reeves managed a Banyan Street, Warrnambool cordial factory which had been established by John Rowley. Ralph Reeves bought a business in 1916 at Hamilton and sold it in 1929 to concentrate on the Warrnambool business. Reeves was joined by his son Reg in Warrnambool and Reg operated the business from 1946 to 1972. The trade name of Reeves was still used after Reg Reeves died and continued on for some years. This bottle is of interest as an example of a lemonade bottle form Reeves Cordial Factory in Warrnambool. The Reeves family operated this business in Warrnambool for 40 years. Cordial manufacturing was an important industry in Warrnambool for over 100 years. This is a clear glass lemonade bottle with a round base, a rounded body and a smaller circular neck with a screw top stopper made of composite material. A metal handle is attached to the neck section and it has a coil of metal on the handle for easier handling. The stopper has the name of the manufacturer of the soft drink. ‘R.V.Reeves R.V.R.’ (twice)reeves cordial factory, warrnambool, cordial manufacturing in warrnambool, history of warrnambool -
Warrnambool and District Historical Society Inc.
Bottle, Warrnambool Cordial, Mid 20th century
This bottle came from the Warrnambool business of Warrnambool Cordials Pty Ltd. This business started when Joseph Lescai, a fruiterer in Fairy Street, Warrnambool in the 1920s, began making cordials and soft drinks. Soon this became his core business until it was taken over by a group of Warrnambool businessmen. The business, known as Warrnambool Cordials, was then bought in the 1930s by a Warrnambool garage proprietor, Thomas Hill. Charles and Frederick Flett then purchased the business in the early 1940s and in the 1960s the business was taken over by Thomas McKenzie. The business lasted until the 1980s. This bottle is of interest as an example of the products of the Warrnambool business of Warrnambool Cordials Pty Ltd. Cordial manufacturing was an important business in Warrnambool for over 100 years and Warrnambool Cordials Pty Ltd was a prominent business for many years. This is a green-tinged glass bottle with a rounded base and a rounded body tapering to a short rounded neck and moulded glass top with an opening. It has a screw top composite material stopper with the name of the lemonade maker on the top. Information on the lemonade maker is also impressed into the glass on the side of the bottle. ‘Warrnambool Cordials’ Warrnambool Cordials Pty. Ltd. Warrnambool’ ‘Lemonade’ ‘This bottle is the property of the Warrnambool Cordials Pty. Ltd. Warrnambool’ warrnambool cordials pty ltd, cordial manufacturing in warrnambool, history of warrnambool -
Warrnambool and District Historical Society Inc.
Bottle, Warrnambool Cordials, Mid 20th century
These bottles come from the aerated waters business of Warrnambool Cordials Pty Ltd. This business was established in Fairy Street, Warrnambool in the early 1920s by Joseph Lescai. He had a fruit shop in Fairy Street and began making cordials which eventually became his core business. The business was taken over by a group of local business men and then in the 1930s was purchased by a garage proprietor, Thomas Hill. In 1942 Charles and Frederick Flett took over the business which was known as Warrnambool Cordials. In the 1960s the business was sold to Thomas McKenzie and the products were marketed as McKenzie’s Cordials. The business continued until the 1980s. These bottles are of interest as examples of the products of Warrnambool Cordials Pty Ltd in the mid 20th century. Cordial manufacturing was an important industry in Warrnambool for over 100 years. These are two glass bottles (one with a bluish tinge). The bottles have a round base with a rounded body tapering to a narrower neck and a moulded glass opening at the top. There are no stoppers. The information on the aerated waters supplier is impressed into the glass on the sides of the bottles. Both bottles are slightly discoloured inside on the base. ‘Warrnambool Cordials Pty Ltd’ ‘This bottle is the property of Warrnambool Cordials Pty Ltd Warrnambool’ warrnambool cordials pty ltd, cordial manufacturers in warrnambool, history of warrnambool -
The Ed Muirhead Physics Museum
Instruments, Miscellaneous
Demonstration model: Metal cylindrical instrument has three tubes attached to body with a glass disc in one tube (= viewing port). Large part of instrument is cut away. Model part of accelerator beam line. Bolt holes on the base and top of instrument for attachment into vacuum lines. -
Darebin Art Collection
Sculpture, Helen Bodycomb, Chris Rak & Enver Camdal, Westgarth precinct public art, 1998
Installed in the Westgarth Shopping Strip, the artworks include aerial, street level and inlaid pieces. The aerial installations consist of eight pairs of steel dragonfly wings. The street level series feature ten sculptural pieces of welded steel depicting enlarged body/skeletal parts of fauna that are indigenous to the area. The inlaid artworks are a series of stainless steel mosaic in the pavement.Five pairs of steel dragonfly wings mounted on eight painted PTC power poles. Ten sculptures of welded steel depicting enlarged body / skeletal parts of fauna that are indigenous to the area. These also function as bicycle racks. A series of stainless steel, ceramic and glass mosaic inlays. -
Ballarat Tramway Museum
Photograph - Black & White Photograph/s, Dave Macartney, Jun. 1989
Black and white photograph of Horse Tram No. 1, photographed at the front of the depot about June 1989. Saloon body framing, with panels in position, end windows and sliding doors have been fitted and the both end no windows or internal panels. Jacqui Edwards photographed by the end of the tram.trams, tramways, horse tram no. 1, btps, tramcars, reconstruction , tram 1 -
Ballarat Tramway Museum
Slide - 35mm slide/s - set of 4, Travis Jeffrey, 12/1994 or 1/1995
Four Plastic mount (black base, white cover) slides, of No.28 at St Aidan Drive, Wendouree Parade, taken by Travis Jeffrey either Dec. 1994 or Jan. 1995, prior to withdrawal for repainting and body repairs. Tram has Peters Ice-cream Roof Advertisement.tramways, trams, st aidans drive, wendouree parade, tram 28