Showing 2154 items
matching cast
-
Bendigo Historical Society Inc.
Photograph - 288 View St, Bendigo
Cast iron lace was made in foundries in most cities. There were 42 such foundries in Melbourne alone. It was cheaper to make than wrought iron. "Pig iron",iron ore, was melted in a blast furnace, mixed with alloys and then poured into moulds usually made of sand. The alloys needed a minimum of 2% carbon. A black and white photograph by Alan Doney of 288 View St in Bendigo. The photo shows detail of the wrought iron on the fence. alan doney, bendigo, wrought iron -
Bendigo Historical Society Inc.
Photograph - 159 Forest St, Bendigo
Cast Iron lace was made in foundries in most cities. There were 42 such foundries in Melbourne alone. It was cheaper to make than wrought iron. "Pig iron", iron ore, was melted in a blast furnace, mixed with alloys and then poured into moulds usually made of sand. The alloys needed a minimum of 2% carbon.A black and white photograph by Alan Doney of 159 Forest St in Bendigo. The photo shows detail of the wrought iron on the verandah. alan doney, bendigo, wrought iron -
Bendigo Historical Society Inc.
Photograph - Corner McKenzie Short
Cast iron lace was made in foundries in most cities. There were 42 such foundries in Melbourne alone. It was cheaper to make than wrought iron. "Pig iron", iron ore, was melted in a blast furnace, mixed with alloys and then poured into moulds usually made of sand. The alloys needed a minimum of 2% carbon.Black and White photos by A Doney of House on corner of Mc Kenzie and Short Street Bendigo showing lace ironwork on the balustrade.Photo A Doneyiron lace work, a doney, historical home bendigo -
Bendigo Historical Society Inc.
Photograph - Cathedral Short Street Bendigo
Cast iron lace was made in foundries in most cities. There were 42 such foundries in Melbourne alone. It was cheaper to make than wrought iron. "Pig iron", iron ore, was melted in a blast furnace, mixed with alloys and then poured into moulds usually made of sand. The alloys needed a minimum of 2% carbon.A black and white photograph by Alan Doney of Caretakers Residence Cathedral Short Street Bendigo showing detail of the wrought iron on the verandah. A Doney Bendigoalan doney, bendigo, wrought iron, balustrade -
Bendigo Historical Society Inc.
Photograph - Bench Seat Iron Lacework
Cast iron lace was made in foundries in most cities. There were 42 such factories in Melbourne alone. It was cheaper to make than wrought iron. "Pig iron", iron ore was melted in a blast furnace, mixed with alloys and then poured into moulds usually made of sand. The alloys needed a minimum of 2% carbon.Black and White photos by A Doney of bench seats one showing fern detail and the other leaves and flowers.Photo A Doneyiron lace work, a doney, bench seats -
Bendigo Historical Society Inc.
Photograph - Cnr Forest Barnard Streets Bendigo
CAst iron lace was made in foundries in most cities. There were 42 such foundries in Melbourne alone. It was cheaper to make than wrought iron. "Pig iron"' iron ore, was melted in a blast furnace, mixed with alloys and poured into moulds usually made with sand. The alloys needed a minimum of 2% carbon.Black and White photo by A Doney of Balustrade on property on the corner of Forest and Barnard Streets Bendigo.A Doney Bendigoalan doney, bendigo, wrought iron, forest street bendigo, barnard street bendigo -
Ballarat Diocesan Historical Commission
Boxed Rosary, Rosary beads in presentation box
Boxed rosary presented to Bishop O'Collins for his Jubilee in 1972 with presentation card from Sr St Charles (Sr of Nazareth) enclosed. Crucifix and junction cast in sterling silver by Alex Mitchel & Co. Ltd, Dublin. Crucifix designed by Louis de Brocquy, RMA & junction designed by Anne Crawcour.rosary, mitchel, crawcour, crucifix, beads. o'collins. -
Bendigo Historical Society Inc.
Photograph - Early Nurses Home BBH
CAst iron lace was made in foundries in most cities. There were 42 such factories in Melbourne alone. It was cheaper to make than wrought iron. "Pig iron", iron ore, was melted in a blast furnace, mixed with alloys a nd then poured into moulds usually made of sand. The alloys needed a minimum of 2% carbon.A black and white photograph by Alan Doney of Early Nurses House Lucan Street (Bendigo Base Hospital). Now incorporated in portion of present Nurses home A Doney Bendigo - Copyalan doney, bendigo, wrought iron -
Bendigo Historical Society Inc.
Photograph - Lace Iron Work
Cast iron lace was made in foundries in most cities. There were 42 such foundries in Melbourne alone. It was cheaper to make than wrought iron. "Pig iron", iron ore, was melted in a blast furnace, mixed with alloys and poured into moulds usually med from sand. The alloys needed a minimum of 2% carbon.Black and White photo by A Doney of sandblasting iron lace work on unknown property in Bendigo. Two internal photos of door and arch ways. Larger photo of balustrade with verandah pillars in backgroundA Doney Bendigoalan doney, bendigo, wrought iron -
Federation University Historical Collection
Photograph - Colour, Photographs of Margaret MacDougall artwork
The Ballarat Teacher's College is a predecessor of Federation University3 Photographs of artwork by Margaret MacDougall (Whittle) who completed them for the drawing teacher's secondary certificate 1941. - Study of a flowering plant with 2 designs based thereon. - Measured drawing - porch with doorway St Patricks Ballarat -Drawing from a cast of ornament.margaret macdougall, photograph, teacher training, artwork, st patrick's cathedral ballarat, margaret whittle -
Kiewa Valley Historical Society
Grinder/Mincer - Meat
Old farm kitchen tool used for mincing meat manually.Used at Tawonga, in the Kiewa Valley, by resident Des WartonCast iron with dull smooth surface consisting of a tap to screw it onto a table, a barrel enclosing the auger that turns when the handle is wound around and forces the meat to spill out of a circular grinder. The hand crank is curved with a wooden knob . The outlet is oval shaped.Embossed on barrel: "Universal" Embossed on outlet "2" Embossed on handle "L.F. & c - New Britain Conn U.S.A."household tool, kitchen, meat mincer, grinder, universal no. 2 -
Geelong Naval and Maritime Museum
Common Seal, Geelong Harbor Trust Commissioner's Seal, c.1909
The Geelong Harbour Trust (GHT) was formed in 1905. This seal was used by the Trust Commissioner from 1909-1981 for impressing official documents. It's use was strictly controlled and dictated by the Regulations as contained in the Geelong Harbor Trust Annual Report from 1909. "The common seal of the Commissioner shall be kept under lock and key. Two locks shall be kept by the Chairman of Commissioners and the other of which the Secretary shall have a key. A duplicate key of each lock shall be lodged at such Bank as the Commissioner may direct. The common seal shall be used only by order of the Commissioners" (Regulations, Geelong Harbor Trust, Annual Report 1909). Captain George A. Molland was appointed Harbor Master of the Port (1900-1905) and then Harbor Master of the GHT from 1900-1936 when he retired, aged 88 years. He was replaced by Captain H. Saunders (1936-1950) followed by Captain D.G. Hancox.The seal is significant for its connections to physical changes made to the Geelong waterfront by the Harbor Trust from 1905. The Official Seal was a highly regarded formal object that was used for nearly 80 years by the Trust. The object is significant for its historic connections to the Harbor Masters and Commissioners who used it as part of official communication from the Trust.A seal used for impressing official stationary from the Geelong Harbor Trust. Object is made of cast iron, brass and steel with a large winding handle, screwed to a wooden board and painted black. Gold decorative paint is on the main body and a small portion of the winding handle."F.J. King/ Maker Melbourne"geelong harbor trust, commissioners seal, official seal, geelong maritime museum, captain h. saunders, captain d.g. hancox, captain george molland -
Kew Historical Society Inc
Programme - Theatre Programme, No Escape / by Rhys Davies in collaboration with Archibald Batty, 1958
From the early 1950s, the Kew Repertory Players performed more substantial, if less spectacular fare in the Recreation Hall, and later in the new Kew City Hall, after the former’s demolition in 1960. Their repertoire ranged from plays by Noel Coward to J.B. Priestley. Many of their programmes, the earliest from 1953, and the last from 1965, form part of our collection.Arthur Henry Dear was an employee of the City of Kew, acting as Hall Keeper of the Kew Recreation Hall in Wellington Street, and later the new Kew City Hall in Cotham Road. The Arthur Dear Collection contains memorabilia - tickets, programmes, invitations - as well as his identification badge. Items in the collection dates from the 1940s to the 1970s. The Kew Recreation Hall (Wellington Street) and later the Kew City Hall (Cotham Road) were major locations in suburban Melbourne in the postwar period for civic and private events including theatre productions and exhibitions. The Arthur Dear Collection (in conjunction with the scrapbooks compiled by Marion Tilley) provide a comprehensive snapshot of performing arts in Kew during the 1940s, 1950s and 1960s. The collection includes valuable data about performances, performers, directors etc., during this period. Programme issued by The Kew Repertory Players for a performance of No Escape, a play written by Rhys Davies in collaboration with Archibald Batty. Performances took place in the Kew Recreation Hall in March 1958. The 4-page programme includes a cast list, a synopsis and advertisements for local businesses.no escape, rhys davies, archibald batty, kew repertory players, arthur dear collection, performing arts -- kew -- victoria, kew recreation hall -- wellington street, theatre memorabilia -
Kew Historical Society Inc
Programme - Theatre Programme, Waiting in the Wings / by Noel Coward, 1963
From the early 1950s, the Kew Repertory Players performed more substantial, if less spectacular fare in the Recreation Hall, and later in the new Kew City Hall, after the former’s demolition in 1960. Their repertoire ranged from plays by Noel Coward to J.B. Priestley. Many of their programmes, the earliest from 1953, and the last from 1965, form part of our collection.Arthur Henry Dear was an employee of the City of Kew, acting as Hall Keeper of the Kew Recreation Hall in Wellington Street, and later the new Kew City Hall in Cotham Road. The Arthur Dear Collection contains memorabilia - tickets, programmes, invitations - as well as his identification badge. Items in the collection dates from the 1940s to the 1970s. The Kew Recreation Hall (Wellington Street) and later the Kew City Hall (Cotham Road) were major locations in suburban Melbourne in the postwar period for civic and private events including theatre productions and exhibitions. The Arthur Dear Collection (in conjunction with the scrapbooks compiled by Marion Tilley) provide a comprehensive snapshot of performing arts in Kew during the 1940s, 1950s and 1960s. The collection includes valuable data about performances, performers, directors etc., during this period. Programme issued by The Kew Repertory Players for a performance of the Australian premiere of Waiting in the Wings by Noel Coward. Performances took place in the Kew City Hall in March 1963. The 8-page programme includes a cast list, some profiles, a synopsis and advertisements for local businesses.waiting in the wings, noel coward, arthur dear collection, performing arts -- kew -- victoria, kew city hall -- cotham road -- kew (vic.), city of kew, theatre memorabilia -- kew (vic.), kew repertory players, -
Flagstaff Hill Maritime Museum and Village
Cutter
Rouse Lino- slug cutter for cutting lead spacers in preparing letterpress printing. This cutter was made by H B Rouse Co (of Chicago IL) and patented on May 22, 1900, as cast into the unit.� "American" model. Has part missing. S/N 4426.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Orbost & District Historical Society
weights
Rectangular weights like these were often used with platform scales used for weighing large items or bags.Five rectangular cast iron handled weights - one smaller than the other four. Each of the larger ones has a moulded ring in the middle of the top. The smallest one is cubic and has a small rectangular recess in the front.On the top is a small oval shape on a stem. cast-iron weights -
Orbost & District Historical Society
embosser and seal, 1890's
This stamp and seal were collected by Kevin Ingram who cleaned up the Orbost Butter factory in 1981. It is possibly from the original factory in the 1890's.This seal was probably used on official letters.The Orbost Butter and Produce Co. Ltd was registered on June 1st 1893 and was an important source of income to the Orbost district.Cast iron stamp and seal. Stamp (.1) has a wooden handle which works by a lever action. It has a rectangular base plate and is painted black.The main stem is decorated in gold paint. The separate seal (.2) seems to have been attached to the stamp.On seal in centre : ORBOST Around edge of seal : Orbost Butter Factory plus some unreadable print orbost-butter-factory agriculture farming seal embosser stamp -
Mont De Lancey
Typewriter
Thomas Sebire brought this typewriter for his daughter Edna in the 1920's.Black cast iron typewriter with 48 round keys. Has the maker "Underwood" in gold lettering on front. Single keyboard with ruler. Has typewriter touch type guide card. Plus metal cover with handle. Plus two black typewriter ribbons in boxes. On metal cover - Underwood. Made in U.S.A.typewriters, typewriter cases, typewriter accessories -
Whitehorse Historical Society Inc.
Domestic object - Scales
Victorian cast iron and brass scale and weights - large metal frame with two holding frames at either end balanced against each other - one to hold the weights and the other to hold the object being weighed. Two pans and four weights Pendulum in centre.3 Kilodomestic items, weighing -
Bayside Gallery - Bayside City Council Art & Heritage Collection
Sculpture - patinated bronze, Anne Ross, Summertime, 2017
Site specific outdoor installation on permanent display near the Sandown Street Dog Beach, BrightonAnne Ross, Summertime 2017, patinated bronze, 220 x 220 x 150 cm. Bayside City Council Art and Heritage Collection. Commissioned 2017.A free standing, three dimensional sculpture, cast in bronze, patinated and painted. A larger than life dog wearing sunglasses with ears blowing in the wind is sitting under a singular tall tree facing the beach. Both the dog and tree sit on a large rectangular base.sculpture, public art, dog, brighton, beach, tree, anne ross, coastal art trail, foreshore -
Glenelg Shire Council Cultural Collection
Container - Try Pot, n.d
Donated to City of Portland by ? Check minutes of M.H.A.C. Stored at city depot for many years (unaware of its significance). Placed in collection 1990's? Check minutes of M.H.A.C.Cast iron, oval shaped, 2 opposite flat sides, 2 round lifting or bracing lugs and diagonally opposite each other. Circular opening on the top surrounded by collar, Gaps in collar to fit spout and perhaps join to another similarly shaped pot.Front: on collar "Bishop London" Back: -whaling, trypot, maritime industry -
Villa Alba Museum
Photograph - Hearth Tiles, Dining Room Fireplace, Villa Alba, Mintons Ltd, c.1882
The Villa Alba Museum is cultural institution committed to the collection, study and display of 19th century interior decorative finishes, and the components of 19th and 20th century interior decoration. Most rooms in this historically and aesthetically significant house have stone (typically marble) fireplaces that are inset with plain and decorative tiles produced by the company of Mintons Ltd.Digital photograph of the pattern of plain hearth tiles in the fireplace of the dining room at Villa Alba. The square majolica plain tiles, positioned under where the original cast iron grill sat, are in shades of brown, green and blue. The tiles were produced by Mintons Ltd.fireplaces, mintons, mintons - tiles, villa alba -- dining room -
Glen Eira Historical Society
Photograph, Beauville Avenue, 33, Murrumbeena, 2001
Originally labelled "Beauville Estate, Established 1936, Still Thriving 65 years on, 10th March 2001", the Beauville Estate Album contains colour photographs of houses in the Estate. They were taken around the time of the Beauville Estate’s 65th Heritage Celebration held on 10/03/2001 and donated to the Caulfield Historical Society shortly afterwards. Photographer unknown.City of Glen Eira’s Heritage Management Plan Vol 2 p79 (this is p84 of the pdf version) – HO12 Beauville Estate and environs, Murrumbeena: The Beauville Historic Area is important at the State level as the first large housing estate undertaken by the AV Jennings Construction Co, later Jennings Group Limited, Victoria’s largest home builder. It is important also as a very early estate development incorporating a range of features other than houses and including made roads, shops and recreation facilities. In this respect it was the forerunner of the comprehensively planned housing estate of the post war era. The estate is distinguished by its aesthetic values, as is the earlier and comparable Hillcrest Estate, which are formed by a combination of restrained diversity in house styles, with the exception of no. 30 in the emerging International style, and by a landscaped garden environment. Colour photograph of unpainted variegated brown brick house with an arched porch, tiled roof, striped awnings, sash windows and low unpainted matching brick fence in the foreground with "33" on the brick pillar beside the driveway next to a low black cast iron gate. murrumbeena, houses, beauville avenue, architectural styles, 1930's, inter war style, a.v. jennings, av jennings, jennings, brick houses, beauville estate, porches, arches, sir albert victor jennings, a v jennings construction co, beauville estate heritage area, glen eira city council, architectural features, jennings group limited, land subdivision, gardens, beauville historic area, striped awnings, sash windows, brick walls, metal letterboxes, cast iron work -
Glen Eira Historical Society
Photograph, Dalny Road, 11, Murrumbeena, 2001
Originally labelled "Beauville Estate, Established 1936, Still Thriving 65 years on, 10th March 2001", the Beauville Estate Album contains colour photographs of houses in the Estate. They were taken around the time of the Beauville Estate’s 65th Heritage Celebration held on 10/03/2001 and donated to the Caulfield Historical Society shortly afterwards. Photographer unknown. City of Glen Eira’s Heritage Management Plan Vol 2 p79 (this is p84 of the pdf version) – HO12 Beauville Estate and environs, Murrumbeena: The Beauville Historic Area is important at the State level as the first large housing estate undertaken by the AV Jennings Construction Co, later Jennings Group Limited, Victoria’s largest home builder. It is important also as a very early estate development incorporating a range of features other than houses and including made roads, shops and recreation facilities. In this respect it was the forerunner of the comprehensively planned housing estate of the post war era. The estate is distinguished by its aesthetic values, as is the earlier and comparable Hillcrest Estate, which are formed by a combination of restrained diversity in house styles, with the exception of no. 30 in the emerging International style, and by a landscaped garden environment. Colour photograph of an unpainted variegated brown brick house with decorative brickwork. Other features include tiled roof, enclosed porch with an arched entrance and black metal lantern, garden and a low unpainted brick fence in the foreground with a cast iron work letterbox on top.murrumbeena, houses, architectural styles, 1930's, inter war style, a.v. jennings, av jennings, jennings, brick houses, beauville estate, dalny road, porches, sir albert victor jennings, a v jennings construction co, beauville estate heritage area, glen eira city council, architectural features, jennings group limited, land subdivision, gardens, beauville historic area, brick features, brick fences, arches, cast iron work, letterboxes -
Ballarat Tramway Museum
Functional Object - Ticket punch, State Electricity Commission of Victoria (SECV)
Has a strong association with Dave Kellett, motorman and inspector in Ballarat; issued to crews in order check and cancel tickets.Brass cast, chrome plated, machined, device used to cancel or punch paper tickets when purchased. Placed a hole in the ticket. Spring loaded, consists of two main parts with a pin & spring. Chrome plated wearing off. - see sketch on original worksheet.Has letter "U" punched inside of handles near pin.trams, tramways, ticket punch, tickets, fares -
Bendigo Historical Society Inc.
Programme - Bendigo Operatic Society: The Merry Widow
"The Merry Widow" music was written by Austro-Hungarian composer, Franz Lehar, with the libretto contributed by Viktor Leon and Leo Stein. It was based on the comedy play "The Embassy Attaché". It premiered in Vienna in 1905.Bendigo Operatic Society program from The Merry Widow production. Front Cover information: The Capital Theatre, Opening Friday April 30th 1965 for five nights. 8 double sided pages, printed program with black & white photos of those involved & cast souvenir programme, bendigo operatic society -
Bendigo Historical Society Inc.
Photograph - HARRY BIGGS COLLECTION: ROYAL HOTEL, MILLERS FLAT
Photograph. (proof 80) A brick and timber building in two sections, with an iron roof. The wide verandah on the brick section has ornate cast iron lacework and the timber section has seating under the verandah. In the foreground there is a man on horseback rounding up a mob of sheep.buildings, hotel, royal , millers flat, royal hotel, millers flat -
Federation University Historical Collection
Document, Ballarat Technical Art School Prospectus, 1908
The Ballarat Technical Art School was established in 1907 as a division of the Ballarat School of Mines. Folded brochure with a prospectus for the newly established Ballarat Technical Art School. The principal was Herbert H. Smith. Subjects taught included Dressmaking, Millinery. Ladies Tailoring, Manual training, Carpentry, House Decoration, Signwriting, Lettering, Stenciling, Marbling, Graining, Glass Embossing, Ticket Writing, Art Teachers' Course, Life Classes, State School Teachers' CLasses, Drawing from a Flat Example, Drawing Ornament for the Cast, Practical Geometry, Perspective. Drawing in Light and Shade from the Cast, Modelling Plant Forms, Historic Ornament, Drawing the Antique From Memory, Composition of Form and COlour, Human Anatomy, Design, etc.ballarat technical art school, ballarat school of mines technical art and trade schools, prospectus, herbert h. smith, h.h. smith, f. foster, m. young, g. clegg, j. barber, t.r. pridgeon, albert steane, a.w. steane, e. cornell, art education -
Kiewa Valley Historical Society
Weights - 5 in Set
Used to weigh bulk produce in the Tawonga Store. Part of a platform scale.Historical: Imperial weights used before packaging of goods. Tawonga Store opened c1920 selling produce for the farming community of the Kiewa Valley.5 circular cast iron weights with a slot from the edge towards the centre. Each has a ridge around the circumference to enable each to fit on top of a bigger one. On the top, above the slot, the weight is embossed. The set is held together with a piece of wire about 50 cm long. The set fit on to a holder which has a circular hook for hanging and a long straight cast iron rod going through a solid half sphere which is held with a nut at the base. The half sphere has a wider circular base for weights to sit on. Used with scales (KVHS 0800 (B)) to weigh goods sold at Tawonga Store.Weights: 14 lbs; 28 lbs; 56 lbs; 1 cwt; 2 cwt.weights. scales. shop. store. tawonga store. -
Kew Historical Society Inc
Photograph - 'Berrington', 29 Sackville Street, Kew, 1988
'Berrington' in Sackville Street was built in 1888 for Job Smith, builder, who was the first owner of this substantial two-storey house. The property was given an initial N.A. V. of £125 3 and it is possible that Smith was the contractor for his house.By the turn of the century 'Berrington' was identified as having thirteen rooms and an N.A.V. of £13 while the house remained in the hands of the Smith family until the late 1930s. The new owner at that stage was a Mrs Pederson who convened the house into three flats 6 while in 1951 it was further subdivided to become seven units. (Kew Conservation Study, 1988)Colour photographic positive of one of 'Berrington'. The building is a large two storeyed house typical of the late Victorian period. It remains substantially intact with a cast iron verandah dominating the front and side facades, that has the added distinction of a fine cast iron frieze that at ground floor level has two tiers. Behind the verandah, the facade is asymmetrical. There is a central six panelled door with a fine semicircular fanlight, and segmentally arched windows to the ground floor and on one side of the door there is a polygonal bay window that extends up the two floors. The eaves and chimneys are decorated with Italianate brackets. (Kew Conservation Study, 1988)berrington -- sackville street -- kew (vic.), job smith