Special shape bracket,made from 100cm x 50cm x 6mm channel steel 59cm long, bent at 80* in middle and welded crossplate sections. 4 x 25mm holes one arm.

Kodachrome Transparency - 35mm slide - cardboard mount, with one side with red border and words "Kodachrome Transparency / Processed by Kodak" top and bottom. Photo taken by Ben Parle 8/4/1958. Has slide No. "6" stamped in black in top corner. Photo of Ballarat No. 20 inbound at View Point Junction, Macarthur St and Wendouree Parade. Has welding truck set up in front of tram. Tram has the destination of Victoria St. See Reg. item 2864 for photo of welding truck. "Drummond St. View Point Jtn Ballarat" / "8-4-58"tramways, trams, view point, macarthur st, wendouree parade, tram 20

Armour worn by Dan Kelly, Kelly Gang member and brother to Ned Kelly, during the Glenrowan Siege, August 1880.Armour worn by bushranger Dan Kelly including helmet (VPM1799.1); chest plate (VPM1799.2); back plate (VPM1799.3) and groin plate (1799.4). Armour constructed from heavy metal plough plates, bolted and welded together.Painted on inside of armour : 'Dan Kelly', 'Police Exhibition', 'E. Kelly' Impressed on plough VPM1799.3 'Huntly Crucible Cast'ned kelly, bushranger, kelly gang, dan kelly, glenrowan, victoria police

Booklet; buff coloured cover, printed with Barbweld, the new and better barb wire, electric welded. Image on front of sheep in paddock and barb wire. Barbweld was a later improved design of barbed wire from the makers of Barblok.bendigo, industry, abbott supply, abbott supply, barbweld, barbwire, advertising

Letter dated 24/2/1916 from F A McCarty HTT Engineer and Manager to Jas R Henderson, Construction Engineer PMTT about the supply and possibly welding the bonds between track joints to ensure electrical continuity.Has a close association with the two engineers named and their correspondence re working.Letter typed on HTT letterhead watermarked - "Sovereign Ultra Strong" and "British Made"tramways, htt, pmtt, electrical engineering, track work.

Photo shows Geelong 38 south bound to Belmont and welding truck - Moorabool St between Myers and McKillop Streets. The welding with the power supply from the overhead would most likely be repairing a broken joint. One of a set of photos was taken between 15/2/1956 and 3/3/1956 when services operated only between Belmont and North before the final closure of the Belmont route on 25/31956 and that bogie tram 31 is not shown on the board, having gone to Ballarat on 15/2/1956 - see item 5554. See item 8213 for an article on the Geelong system by Keith Kings. Yields information about the Geelong operations toward the closure of the tram system.Black and white Negative - 120 sizetramways, geelong, tram 38, moorabool st, welding truck, track repairs

B/W Photograph of W.E. Coward Carpenter & Joiner shop with O. Anderson Welding Shop next door - Jack & Cliff Earle & Pop & Fred Coward 1935-1936 - Scotland Place. Young man in background with a pushbike. streetscape

Documents, Bert Graham Collection, Bendigo East Swimming Pool, from Morris & Nova Austin of EEL Fabrication DLI Welding submitting a quotation for supply and fit 1 pair of gates at Eastern Park, their price for this work is $1,700.00.bendigo, clubs, bendigo east swimming pool

Anthea WILLIAMS The sculptural practice of Gippsland-based artist Anthea Williams includes welded metals, moulds and assemblages. She has lectured Visual Arts at Federation University, Churchill and has many years experience as a technician at Latrobe Regional Gallery. Large steel sculptureanthea williams, gippsland art collection, sculpture

This badge was found in a garden in Arnold Street, Bendigo. Not clear if WW1 or WW2, more likely WW1.Brass Badge. It has some evidence of writing that was originally on it. Moulded onto the front is the Aust Coat of Arms. Around the circumference are the words "Volunteered for Active Service" "Issued by Department of Defence" Medically Unfit. The rear has two loops welded in.On rear "Badge 60369."aust dept defence, badge

The carbon rods were either used by 'Gem Pictures' or in the study of 'Electricity and Magnetism' at the Ballarat School of Mines. In electricity a current is conducted through carbon rod between the electrode holder and the arc in carbon arc lighting or welding. A carbon rod is also used in batteries. A tin full of carbon rodsOn box found with carbon rods: "Siemens-Planiawerke aktiengesellaschaft fur kohlefabrikate berline-Lichtenberg Made in Germany jede kohle trägt unseren vollen firmenstempel Translation: Siemens Planiawerke A corporation limited by shares producing carbon in Berlin-Lichtenberg Each carbon carries our full company stampballarat school of mines, carbon, carbon rod, arc lighting, electricity, henry sutton, theatre, projector, gem pictures

Coin Holder used by staff on the Bendigo Tramways.A pre-decimal, spring-loaded coin holder constructed using three various size brass tubes that are braise welded together. A red painted support bracket enables the holder to slide onto a belt. Designed to house threepences, sixpences and shillings.coin holder, tram

Candle stick manufacturing moulds were extensively used throughout the Kiewa Valley and its regions to provide rural homes and businesses with illumination during times of limited light e.g. night time. These candles were used before the Kiewa Valley was placed of the electrical grid. The candles were made from parrafin wax. Before the 1920"s electricity was in limited supply due to the inability of the private electricity suppliers to service isolated rural regions. It was not until the Victorian State Government passed legislation (1920) to improve electricity supplies by forming the State Electricity Commission of Victoria (S.E.C.V.) Isolated rural communities could not meet the higher costs to have electricity supplies connected and therefore it was not until the 1950's that adequate domestic electrical power could be supplied.The isolation that the Kiewa Valley provided was of a greater hindrance to any utility (power,roads & telephone) where the cost per instillation was beyond the rural population's ability to pay either directly or indirectly. One of the benefits that the "closed" community of Mount Beauty had, when it was administered by the SECV was that some utility costs were a lot lower than that of the other settlements in the Kiewa Valley. This disparity led to a conference in 1928 of the rural and regional councils to demand from the Government an equality of electricity tariffs. This equality did not take place until 1965. The demand and usage of cheaper and affordable lighting that wax candles provided was for some rural families a way of life until the mid 1900's.This candle making mould is made from mild rolled sheet steel(tin). The top basin is rectangular in shape with beveled edges(facing in on all sides. There are six holes in the top basin for vertical hollow tubes to feed off. The six tapered cyclindrical tubes running from the top basin to the bottom raised platform base. All connections are welded together. The bottom of each cylinder has an opening for the candle wick. The wick is positioned in place before the molten wax is poured into the cylinders. A positioning ring has been welded to one bottom ring for stability.parrafin wax, candles, domestic household ighting

This pin was created by Miss Annie Emily Gardner to raise relief money to support industrial unrest in Newcastle. It was reported in the Newcastle Morning Herald that Miss Gardner was vice-president of the Women's Organising Committee of the Political Labour League. A copy of an advertisement for the pin has been uploaded here. Price of the silver pin was 2/- and gold 15/6. Photograph of the pin - to come. Donated to Ballarat Trades Hall by John Mildren. Significant to industrial action, union organising and the labour movement in Australia.Pin. Round. Sterling silver.Silver anchor superimposed over a white globe (with silver latitude and longitude lines). A safety pin is welded to the back. Blue outer circle with inscription: "Organized labor the hope of the world 1909". Inscription on the back: "USA ???" in very tiny font.btlc, ballarat trades and labour council, unions ballarat, ballarat trades hall, political labour league, artefacts - jewellery, gardner, annie emily, industrial action, campaigns, relief - fundraising

From Left to Right: Wally Thompson ( Standing behind tool cart main layer) - Bert Hill (Foreman) - Ken Cain (Welder) - Jack Hawke (Service Layer) - Operation; preparing length of welded pipe. Early 1963. McIvor Road Hill.person, group, male group of workers

Yellow pipe connected to old concrete pipe. Main trench welding new to old, shadow of photographer, two tyres near pipe on left side, white flexible ring in centre foreground, orange safety netting lying along right side of the trench.Kodakorganisation, industry, gas and fuel

Colour slide of SW6 876 undergoing accident repairs at Preston Workshops. The tram is on stands in the body shop with one of the cabs removed, possibly for major repair or replacement. Welding marks can be seen in the front corner with the word "HOT" chalked on the side. A worker can be seen inside the tram body. Yields information about repairing accident damage at Preston WorkshopsKodachrome colour slides, cardboard mount, duplicate.Has "876" in pencil and stamped "Tramways Museum Society Victoria" on rear.tramcars, preston workshops, tram 876, sw6 class, tramcar maintenance, accidents

J. Austen chrome plated tongue depressor blade only. Size 2 1/4, stainless steel material. The top arm of the instrument has a serrated grip below to facilitate tongue adherence, also has a middle space canal with semi circular welded rings to possibly introduce or attach an anaesthetic tube. This piece has in its internal lateral side engraved the possible owner's initial and last name. Minor scratches and dust marks are present over the piece as well as oxidation spots around engraved name. Weld spots in metallic semi circles edges on top of the piece.Engraved at the internal side of the handle, V. BRAND Stamped at the external side of the handle, J.AUSTEN / 2 1/4 / STAINLESStongue depressor, medical instruments, airway instruments, j. austen

Yields information about the problem of electrolysis in Ballarat due to poor track joints and other problems., Yields information about the problem of electrolysis in Ballarat due to poor track joints and other problems.Carbon copy of a typed memo from the Works Superintendent to the Branch Manager of the SEC Ballarat regarding Electrolysis - poor earth return and the possible reasons for this. Memo suggests that track welder should be trained to test and the time and cost to test and repair the system. Memo dated 18/8/1966. On rear has various notes in ink. Was located with item 3701 - 1967 Trackwork diary.trams, tramways, sec, trackwork, electrolysis, welding

Colour Photograph of Warren Doubleday oxy welding the advertising holes on No. 2 end of W4 671 at the depot on 5/1/1992 as part of its repainting. See page 8 of January 1992 Fares Please! On Fujichrome paper. See January 1992 Fares Please!w4 class, btm, modifications, tram 671

Installed in the Westgarth Shopping Strip, the artworks include aerial, street level and inlaid pieces. The aerial installations consist of eight pairs of steel dragonfly wings. The street level series feature ten sculptural pieces of welded steel depicting enlarged body/skeletal parts of fauna that are indigenous to the area. The inlaid artworks are a series of stainless steel mosaic in the pavement.Five pairs of steel dragonfly wings mounted on eight painted PTC power poles. Ten sculptures of welded steel depicting enlarged body / skeletal parts of fauna that are indigenous to the area. These also function as bicycle racks. A series of stainless steel, ceramic and glass mosaic inlays.

This is a photograph of McKillop's Bridge probably taken just after its rebuilding. The current McKillop’s Bridge was built by the Country Roads Board in two stages between 1931-36, during which its height was raised after the original bridge superstructure was washed away in record floods of January 1934, prior to its original official opening. In its reconstructed form the original concrete abutments were turned into additional piers and the welded-steel trusses were cantilevered back over them to meet the new higher road approaches. "McKillops Bridge was Heritage listed due to its social and technological significance – the steel trusses' arc-welded construction technique was a pretty big deal in the 1930s. It was once an important route for cattlemen, who used the ford across the Snowy in the years preceding the bridge's existence"This is a pictorial record of McKillop's Bridge just after its construction.A black / white photograph of a wooden bridge across a river. At the bottom right is a man with his back to the camera. He is looking at flood debris on the bank. At the bottom left are two men near a pylon.on back - McKillops Bridgebridge-mckillop's snowy-river-bridge

This hat pin stand would have been a common object in a woman’s bedroom in the past, especially about the end of the 19th century and the beginning of the 20th century when women wore large hats and they needed large pins to hold them in place. This hat pin holder has no known local provenance but it is kept as a memento of the past and will be useful for display.This is a silver-coloured metal stand with a round base with impressed patterns on the top and a central raised oval section containing a circular spike. Near the top of the spike is a circular-shaped piece of metal in a fretwork pattern. This fretwork has been welded on and has space to insert several hat pins women’s accessories, history of warrnambool, hat pin stand

Porthole, painted blue, with hinged locking bolts welded to base plate. Base plate has six bolt holes, one till with bolt and nut. Base plate has glass plate as does hinged porthole. Corrosion and paint peeling. Both plates of glass have cracks. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, porthole, ship fitting

QUASLARC Generator Built by the Quasi-Arc Co. Ltd. Victoria London SW.1, This generator is believed to have been used for welding purposes. The generator is driven by a belt from a nearby steam plant. The quasi-arc co ltd 6 kw. d.c generator 60/30 volts 0/200 amps 1200 rpm comp cont rating No 4696 Historic - Industrial Generator Large casting with a drive pulley on one end, cast aluminum covers, bronze makers plaque. The quasi-arc co ltd 15,grasyenor ????ens. Victoria,London,S.W.1 This machine is designed for use with ????? Arc electrodes 6 kw. d.c generator 60/30 volts 0/200 amps 1200 rpm comp cont rating No 4696puffing billy, generator, welding, quasi - arc

This is a souvenir jam spoon which would have been given or sold to Warrnambool Bowling Club members and visitors to Warrnambool. The game of lawn bowls was first played in Warrnambool in 1868 but the present day Warrnambool Bowls Club was founded in 1890, with a bowling green in Liebig Street, Warrnambool. Today the club has its facilities in Kelp Street Warrnambool and its logo features a Warrnambool lighthouse.This spoon is a memento of the Warrnambool Bowls Club and shows the type of souvenir popular with members and tourists some 40 or 50 years ago. This is an electro-plated nickel silver jam spoon. It has a coloured metal piece welded into the top of the spoon. This has been enamelled in blue, white and silver and has an image of a lighthouse and some printing. There are also some markings on the back of the spoon. The spoon is in a cream-coloured cardboard box which is rectangular-shaped. Spoon: Warrnambool Bowling Club Pitcher EPNS A1 Box: Pitcher Fine Silverware warrnambool bowls club, history of warrnambool

This mess tin belonged to MELIA JAMES HENRY : Service Number - VX18960 : Date of birth - 08 Oct 1900 : Place of birth - WARRINGTON ENGLAND : Place of enlistment - CAULFIELD VIC : Next of Kin - CHURTON MARGARET The mess tin was manufactured by Sellman & Hill (S&H) Ltd from Wolverhampton. British aluminum mess tins were used by most of the Empire early in the war. A new pattern of mess tin was developed for the Web Equipment 1937 Pattern, which was a nested, two-piece rectangular mess tin with long, folding handles. Mess tins were used to prepare or heat food but they were also used as a container from which to eat and drink. The tins were lightweight and sturdy but they became hot very quickly when heated. Mess kit consisting of two pieces: One rectangular aluminium mess tin from WWII with multiple hand-carved inscriptions on outside indicating owner and locations he was stationed in 1940 and 1941. Welded handle attachment, although handle itself is missing. There is also a small, flat bottomed aluminium cup.Multiple hand-carved inscriptions on three external sides of the mess tin: Side one: "1940 Palestine / Egypt / VX18960 / Dvr Melia. J / AASC / 1941 Libya" Side two: " BARDIA / GREECE / TOBRUK" Side three: " Gaza / Beit Jerga / Kfar Vitkin / jaff / TEL-AVIV / Jerusalem / Nazareth / Haifa" Manufacturer's hallmark stamped on side four: "S.&H. LTD / 1938" and below that a stamp of an arrow pointing upmess tin, aluminium mess tin, wwii, wwii mess tin, sellman & hill, british mess tin

A wooden racquet featuring a decal image on both sides of the throat, of a gold shield featuring the Olympic symbol in the centre. Inscription from head to stem, on both sides: OLYMPIC/FIBRE/WELDED/THROAT/SLAZENGER. Materials: Wood, Nylon, Metal, Glue, Lacquer, Leather, Ink, Ribbon, Plastic, Paint, Stringtennis