Showing 1706 items
matching arm
-
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Photograph, Lakes Post Newspaper, 1/08/1993 12:00:00 AM
Black and white photograph of Doreen Robinson of Johnsonville, Pat Howlett of Swan Reach and Queenie Warne of Orbost at the CWA Conference Community Hall Toorloo Arn Victoriaclubs -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Photograph, Lakes Post Newspaper, 1990
Black and white photograph showing Caroline Joiner preparing dough for bread baked every day at Beachfield Farm Country Restaurant Lake Tyers Beach Road Toorloo East Gippsland Victoriabusinesses -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Postcard, 1950c
North Arm Bridge Lakes Entrance. (on back holidays 1951)Also 1x tinted photographic postcard identical scene 01162-2 good conditionBlack and white postcard of the North Arm bridge, lakes and western section of township, sand hummocks in distance. Lakes Entrance Victoriabridges -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Photograph, L Carpenter, 1952 c
Rock was unloaded from the tramway and placed in a barge for transportation down the North Arm to the EntranceBlack and white photograph of the buffers beside the North Arm at the terminus of the tramway which carried rock from the Colquhoun quarry for forming the artificial entrance at Lakes Entrance Victoria.township, waterways -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Postcard, H D Bulmer, 1930 c
Also two identical black and white postcards taken near entry to North Arm showing vegetation die back in foreground bare banks in background 05279.1 and .2Black and white postcard showing passengers on Peels launch Blackbird anchored at tea room jetty north Arm Lakes EntranceH Peels Tourist Launch 'Blackbird'navigation -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Photograph, M Holding, 2008
Also two other colour photographs taken from Holding property showing twists and turns of North Arm number 03862.1 and 03862.2 sizes 10 x 15 cmColour photograph of North Arm views from D and K Holdings property Hunters Lane looking NNE Lakes Entrance Victoriabusinesses, people, tourism -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Photograph, 1926
Also two other black and white photographs taken in North Arm 04999.2 at big bight, 04999.3 taken at Mississippi Creek quarry showing transferring rock to trucks on way to be loaded onto barge. 7 x 11.5 cm. Also an enlarged version of same photograph 10 x 15 cm 04999.3Black and white photograph taken along North Arm near bridge Lakes Entrance Victoriajetties -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Photograph, L Carpenter, 1952 c
Also two black and white photographs of Western part of township taken from sand hummocks across Cunninghame Arm 04315.1 and 04315.2 15 x 11 cm and 11 x 15 cmBlack and white photograph of part of the township taken from shore of sand hummocks looking across Cunninghame Arm Lakes Entrance Victoriafishing industry, jetties -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Photograph, LE Tidy Town Committee, 1994 c
Also a colour photograph of four people at picnic table adjacent to Northern end of Cunni8nghame Arm Footbridge Lakes Entrance 051`58.1 10 x 15 cmColour photograph showing crowd of people on Cunninghame Arm footbridge at start of the Duck Race a local fundraiser with paddle boats in background Lakes Entrance Victoriawaterfront, gardens -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Postcard, The Rose Series, 1975
Sand dumping has commenced in preparation of works to modify and deepen Cunninghame Arm|Also one other copyColour postcard of the view of Cunninghame Arm, Lakes Entrance, from the Glenara Tower. Shows the western boat harbour with private cruisers and professional fishing vessels moored at wharf. Lakes Entrance Victoriawaterways, fishing industry, boats and boating -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Barbers' Equipment, hair clippers 'BURMAN", c1950
Hair clippers are specialized implements used to cut human head hair. They work on the same principle as scissors, but are distinct from scissors and razors. :Hair clippers comprise a pair of sharpened comb-like blades in close contact one above the other which slide sideways relative to each other, a mechanism which may be manual or electrical to make the blades oscillate from side to side, and a handle. The clipper is moved so that hair is positioned between the teeth of the comb, and cut with a scissor action when one blade slides sideways relative to the other. Friction between the blades needs to be as low as possible, which is attained by choice of material and finish, and frequent lubrication. Hair clippers are operated by a pair of handles that are alternately squeezed together and released. Barbers used them to cut hair close and fast. The hair was picked up in locks and the head was rapidly depilated. Mid 20thC such haircuts became popular among boys, and young men in the military and in prisons. Burman & Sons Ltd, of Ryland Road, Birmingham, West Midlands, manufactured Burman-Douglas steering gear. Their recirculating worm and ball design of steering gear was fitted to pre-war vehicles such as the Ford Eight and the Ford Prefect, the Bedford CA, plus heavy trucks and off-road vehicles - both pre and post-war. In its day, Burman-Douglas steering-gear was regarded as.... a "quality" feature of a car chassis specification, but the worm and ball design was eventually surpassed by the cheaper rack and pinion design that dominates today. The company also manufactured motorcycle gearboxes, horse clippers and barbers’ clippers. 1871 Company founded. 1897 Private company. 1930s Gearbox for Ariel Square-four motorcycle. (Exhibit at Birmingham Thinktank museum) 1933 Burman and Sons Limited, manufacturers of horse and barbers' clippers, sheep shearers, motor cycle gear boxes and steering gears, Ryland road, Edgebaston 1953 S. F. Burman, M.B.E., Managing Director, Burman and Sons, Ltd 1955 Acquired by Vono Industrial Products. 1961 Manufacturers of motor and motorcycle accessories. 1,500 employees. 1968 Supplied rack and pinion steering units to Ford 1978 Adwest Group acquired Burman and Sons, the steering gear part of Duport. 1986 Major reduction in staffing at Burman due to fall in demand for its products and delivery problems. A set of hand held barbers’ hair clippers with an adjustable screw, from Burman and Sons Ltd of Birmingham, England. Chrome plated, in good condition, c1950. On left arm ; BURMAN On right arm ; MADE IN ENGLANDbarbers, hairdressing, hair clippers, grooming, horse clippers, cars, motor cycles, gear boxes, rack and pinion , worm and ball, steering gears, steel manufacture, birmingham england, burman and sons ltd, moorabbin, bentleigh, ormond, cheltenham, market gardeners, -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Photograph, M Holding, 2006
Also two colour photographs taken from walkway beside Cunninghame Arm looking east 04261.1 and 04261.2 size 10 x 15 cmColour photograph taken from walkway beside Cunninghame Arm looking towards Peels booking office, boats moored at jetties and beside walkway Lakes Entrance Victoriaregional history, township, waterfront -
Flagstaff Hill Maritime Museum and Village
Instrument - Letter Scale, 1920s to 1960s
This scale was owned by Dr Angus, whose training and experience included chemistry and pharmacy. This is a sliding balance scale. The object to be weighed, such as a letter or a dose of medicine, is placed on the square metal plate and the weight, the slider, is moved along the notched metal arm and adjusted until the arm is horizontal, then reading is recorded of the figure the pointer on the slider is positioned. This design of small is often referred to as a letter scale. This item was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” that includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969.The scale is significant as an example of 20th century measuring and weighing equipment. It is also important for its association with the W.R. Angus Collection, which is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being a historical example of medicine, administration, household equipment and clothing from the late 19th to the mid-20th centuries. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Scale; a small sliding balance letter scale. The scale has a flat metal platform and a toothed metal balance arm with cylindrical brass weight. These are attached to a decorative metal stand that is mounted onto a shaped lacquered black wooden base. The sliding weight causes the arm to pivot on the stand. The arm is marked into equal-length segments from 0 to 8. Each segment is marked into halves. There is no maker’s mark. The scale is part of the W.R. Angus Collection.flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, dr w r angus, letter scale, postal scale, balance scale, single arm scale, chemist scale, pharmacy scale, office equipment, retail equipment, sales equipment, measuring instrument, weighing instrument, technical instrument, medications, w.r. angus collection -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Photograph, M Holding, 1985 c
The town section of North Arm previously known as The BlackwaterColour photograph taken from Kalimna Heights showing outer barrier and entrance channel. Road and new bridge to Bullock Island Apex Park beside North Arm in foreground has old playground equipment with timber fort and hillock with underground tunnel Lakes Entrance Victoriaholland, topography, waterways -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Photograph, Lakes Entrance Tidy Town Committee, 1994 c
Also a colour photograph taken of path beside Cunninghame Arm, cars parked and person walking on path 04251.1 10 x 15 cmColour photograph of the Western section of the pathway beside Cunninghame Arm looking towards Club Jetty and Club Spit, low lights beside path, seat on lawn area beside road Lakes Entrance Victoriainformation, tourism -
Trafalgar Holden Museum
Functional object - Horse clippers
Used in the grooming of horses C1900As sold by Holden and FrostTwo pivoted steel arms with wooden handles. Steel combOn steel arm Martin and Co on other arm manufacturers on comb improvedequine, clippers -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Photograph, 1956
Note on back says - Snowy Mountain Tour, M V Loch Ard, North Arm, Lakes Entrance, Tuesday April 17 1956, where we had morning teaBlack and white photograph showing MV Loch Ard in North Arm at tearooms jetty, shows several people on the boat and others on the landing. Thick vegetation on opposite bank. Lakes Entrance Victoriarestaurant, waterways, boats and boating, tourism -
Bendigo Military Museum
Photograph - PHOTOGRAPH 38TH BN, C.1918
Photo is; Robert John Milligan No 1877 enlisted 3.3.1916 age 34 in 2nd reinforcements 38th Bn, embarked for England 16.8.1916, due to getting into trouble he does not embark for France until 3.1.1918, WIA 30.8.1918 GSW to Arm and Thigh, discharged from the AIF 20.3.19120Postcard photo sepia tone showing a soldier standing hands behind back, has Sergeants stripes on one arm, studio background, inscription on front.On front in black, “Yrs sincerely R.J.Milligan”, On rear in pencil, “R.J. Milligan C/- J. Milligan Maiden Gully”photographs, 38th bn, -
Flagstaff Hill Maritime Museum and Village
Functional object - Prosthetic Arm, Early 20th century
This prosthetic arm has been made to assist a person who has part of his or her arm missing. The hook fixed to the end is an attempt to give the wearer extra assistance in replacing some of the functions of a hand. Prosthetic hook arms like this one have existed for centuries. Archaeological evidence shows that prosthetic limbs have been designed and used since almost 6000 years ago. Hooks for seafarers were made from whatever materials were readily available onboard the ship., such as metal, wood and leather. Often the prosthetic arms were simple lock-jointed pieces with basic hand positions. During the 19th century, advanced technology led to improved appearance and movement of prosthetics. Further development in the 20th century included lightweight, durable materials and electronic robotic movement of the hook, along with a more aesthetic appearance.This prosthetic arm is an example of an aid used to assist people with missing limbs, whether born that way or as a result of injury. Prosthetic or artificial arm. Brown leather cylinder with elbow pad and straps with buckles. A single rotating metal hook has been fixed to the end.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, prosthetic, artificial arm, artificial limb, prosthetic arm, false arm, hook hand, amputee's aid, medical equipment, medical assistive aid, assistive aid, rotating hook, fake arm -
National Vietnam Veterans Museum (NVVM)
Uniform - Military Police Arm Band
Australian Military Police Arm Band; Worn by Ronald Charles Shaw, Royal Australian Army Provost Corps, 1967-68, National Serviceman, Corporal.The object was donated by Ronald Shaw who served as a conscripted provost. The object is in good condition and we believe there are very few in existence. Vinyl black item worn on arm. Red raised MP letters silver badge at top of band AUSTRALIA. On reverse side four press studs: hessian: SHAW written in black ink. As worn by Australian Military Police in Vietnam.Front: MP, Back: SHAW.military police, provost, uniforn, arm band, ronald shaw -
Bendigo Military Museum
Uniform - TROPICAL UNIFORM, 1954
Uniform issued to “Maj Andrew John BALSILLIE MBE”. Refer Cat No 118.5 for his service details and RSL, Council history..1) Tropical green jacket, cotton drill with shoulder rank epaulettes with “Major” insignia, Unit arm patches on both upper arms, left sleeve has embroidered Rising Sun with lettering under, right sleeve has a blue patch with red crown and lettering, a waist let and metal buckle. .2) Tropical green shorts, cotton drillUnit Arm Patches, “Royal Australian Electrical and mechanical Engineers” Left sleeve, “Australian Military Forces” Right sleeve, “Commonwealth”uniforms, tropical -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Photograph, Crown Studios Bulmer, 1917c
Concrete bridge over North Arm, constructed by Coate Bros. opened September 1917. Also Maranui Guest House history.Black and white photograph of a tourist launch named Maranui 2 beside the North Arm Bridge. People on launch dressed in summer clothing of pre WW1 era. Posts and steel rope rails on bridge. Low tide indicated by height of bridge piers out of the water. Lakes Entrance Victoriaworld war 1914-1918, boats and boating, bridges, clothing -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, Magill, c 1900
Magill's laryngoscope with open straight blade and flat round speculum and a detachable light bulb connector, the bulb is missing. This laryngoscope is a previous version of the battery use ones conceived around 1920 therefore circa 1900. The design of the handle is similar to the Shipway laryngoscopes with a curved and pointed end and anatomical handle grip. The blade attachment place seems to be an adaptation to this kind of blade which differs from original models. The piece has several scratches and deep hit marks, as well as oxidation spots mostly around the internal canal of the blade. There is presence of resin residues on some surfaces. A visible different kind of metal was used at the blade base attachment place and for the light bulb connector. Engraved on handle its model type and in the arm of the handle a possible manufacturer name (illegible) and the place where it was made.Engraved at the handle, MAGILL'S LARYNGOSCOPE. Stamped at the arm of the handle back side, STAINLESS STEEL Stamped at the arm of the handle front side, A[not understandable text might be Allen & Hanburys Ltd.] / LONDON / JZmagill, ivan, laryngoscope, 1900, resin, shipway, light bulb, magill laryngoscope -
Montmorency/Eltham RSL Sub Branch
Equipment - Clinometer, 1941
This model clinometer used in both WW1 and WW2 for checking artilllery and mortar barrel anglesPrecision instrument widely used by Alliied forces in two warsMetal with some parts painted black. Device comprises a segment of a circle with an adjustable radial arm with bubble level on a slide attached"Clinometer Field Mark VI No. A.221" Noblet and Forrest 1941" "Direction of Target" with arrow. "Use this Base for 0° - 45°" "45° - 90° Target" with arrow Circle segment graduated with 0 - 44 degrees on side, 45 - 89 degrees other side. Arm graduated 0 - 60 minutes both sides clinometer, artillery instruments -
Port Melbourne Historical & Preservation Society
Tool - Pen, City of Port Melbourne crest, c. 1990
A City presentation itemPens with City of Port Melbourne crest, red and blue, in grey suede case, c1990'City of Port Melbourne' on the armlocal government - city of port melbourne -
Stawell Historical Society Inc
Functional object - Realia, Bricklayers Arms Glass Mug (Pony)
Small engraved clear glass jug with handleBricklayer's Arm's Hotel Stawell -
Bendigo Military Museum
Photograph - PHOTOGRAPHS
.1) The Soldier would be WW1 given the Chevrons on his arm. .2) The Soldier appears to be more like WW2.Black and white photographs of two Soldiers in Formal pose. 1. Soldier George Wilson in uniform sitting in a formal pose. Portrait shape. He is wearing 3 chevrons for overseas service on his right arm. 2. Soldier Bob Wilson in uniform in formal pose in chest and head shot and portrait shape and signed on bottom right corner, 1. On the back written,”Uncle George Wilson, Nana Spencers Brother”. 2.On front right corner signed "Sincerely Yours, Bob". On back written "Nana Spencer's brother, Bob Wilson". ww1, photographs, bob wilson, george wilson -
Trafalgar Holden Museum
Functional object - Horse Clippers
Used for the grooming of horse hair C1900we believe these were sold by Holden and Frost C1900Two pivoted steel arms with wooden hand grips with steel cutting combClark on one arm, patent on other arm. Impressed on each wooden handle 628 Oxford Streetequine, clippers -
Flagstaff Hill Maritime Museum and Village
Doll's arm, Bisque dolls were being made from the 1860’s
This doll’s arm was part of the cargo from the Fiji and was part of the articles salvaged from the wreck. The three-masted iron barque Fiji had been built in Belfast, Ireland, in 1875 by Harland and Wolfe for a Liverpool based shipping company. The ship departed Hamburg on 22nd May 1891 bound for Melbourne, under the command of Captain William Vickers with a crew of 25. The ship’s manifest shows that she was loaded with a cargo of 260 cases of dynamite, pig iron, steel goods, spirits (whisky, schnapps, gin, brandy), sailcloth, tobacco, coiled fencing wire, concrete, 400 German pianos (Sweet Hapsburg), concertinas and other musical instruments, artists supplies including brushes, porcelain, furniture, china, and general cargo including candles. There were also toys in anticipation for Christmas, including wooden rocking horses, miniature ships, dolls with china limbs and rubber balls. On September 5th, one hundred days out from Hamburg in squally and boisterous south west winds the Cape Otway light was sighted on a bearing differing from Captain Vickers’ calculation of his position. At about 2:30am, Sunday 6th September 1891 land was reported 4-5 miles off the port bow. The captain tried to put the ship on the other tack, but she would not respond. He then tried to turn her the other way but just as the manoeuvre was being completed the Fiji struck rock only 300 yards (274 metres) from shore. The place is known as Wreck Bay, Moonlight Head. Blue lights were burned and rockets fired whilst an effort was made to lower boats but all capsized or swamped and smashed to pieces. Two of the younger crewmen volunteered to swim for the shore, taking a line. One, a Russian named Daniel Carkland, drowned after he was swept away when the line broke. The other, 17 year old able seaman Julius Gebauhr, a German, reached shore safely on his second attempt but without the line, which he had cut lose with his sheath-knife when it become tangled in kelp. He rested on the beach a while then climbed the steep cliffs in search of help. At about 10am on the Sunday morning a party of land selectors - including F. J. Stansmore, Leslie Dickson (or Dixon) and Mott - found Gebauhr. They were near Ryans Den, on their travels on horseback from Princetown towards Moonlight Head, and about 5km from the wreck. Gebauhr was lying in the scrub in a poor state, bleeding and dressed only in singlet, socks and a belt with his sheath-knife, ready for all emergencies. At first they were concerned about his wild and shaggy looking state and what seemed to be gibberish speech, taking him to be an escaped lunatic. They were reassured after he threw his knife away and realised that he was speaking half-English, half-German. They gave him food and brandy and some clothing and were then able to gain information about the wreck. Some of the men took him to Rivernook, a nearby guest house owned by John Evans, where he was cared for. Stansmore and Dickson rode off to try and summon help. Others went down to the site of the wreck. Messages for rescuing the rest of the crew were sent both to Port Campbell for the rocket rescue crew and to Warrnambool for the lifeboat. The S.S. Casino sailed from Portland towards the scene. After travelling the 25 miles to the scene, half of the Port Campbell rocket crew and equipment arrived and set up the rocket tripod on the beach below the cliffs. By this time the crew of the Fiji had been clinging to the jib-boom for almost 15 hours, calling frantically for help. Mr Tregear from the Rocket Crew fired the line. The light line broke and the rocket was carried away. A second line was successfully fired across the ship and made fast. The anxious sailors then attempted to come ashore along the line but, with as many as five at a time, the line sagged considerably and some were washed off. Others, nearly exhausted, had to then make their way through masses of seaweed and were often smothered by waves. Only 14 of the 24 who had remained on the ship made it to shore. Many onlookers on the beach took it in turns to go into the surf and drag half-drowned seamen to safety. These rescuers included Bill (William James) Robe, Edwin Vinge, Hugh Cameron, Fenelon Mott, Arthur Wilkinson and Peter Carmody. (Peter Carmody was also involved in the rescue of men from the Newfield.) Arthur Wilkinson, a 29 year old land selector, swam out to the aid of one of the ship’s crewmen, a carpenter named John Plunken. Plunken was attempting to swim from the Fiji to the shore. Two or three times both men almost reached the shore but were washed back to the wreck. A line was thrown to them and they were both hauled aboard. It was thought that Wilkinson struck his head on the anchor before s they were brought up. He remained unconscious. The carpenter survived this ordeal but Wilkinson later died and his body was washed up the next day. It was 26 year old Bill Robe who hauled out the last man, the captain, who had become tangled in the kelp. The wreck of the Fiji was smashed apart within 20 minutes of the captain being brought ashore, and it settled in about 6m of water. Of the 26 men on the Fiji, 11 in total lost their lives. The remains of 7 bodies were washed onto the beach and their coffins were made from timbers from the wrecked Fiji. They were buried on the cliff top above the wreck. The survivors were warmed by fires on the beach then taken to Rivernook and cared for over the next few days. Funds were raised by local communities soon after the wreck in aid of the sufferers of the Fiji disaster. Captain Vickers was severely reprimanded for his mishandling of the ship. His Masters Certificate was suspended for 12 months. At the time there was also a great deal of public criticism at the slow and disorganised rescue attempt to save those on board. The important canvas ‘breech buoy’ or ‘bucket chair’ and the heavy line from the Rocket Rescue was in the half of the rocket outfit that didn’t make it in time for the rescue: they had been delayed at the Gellibrand River ferry. Communications to Warrnambool were down so the call for help didn’t get through on time and the two or three boats that had been notified of the wreck failed to reach it in time. Much looting occurred of the cargo that washed up on the shore, with nearly every visitor leaving the beach with bulky pockets. One looter was caught with a small load of red and white rubber balls, which were duly confiscated and he was ‘detained’ for 14 days. Essence of peppermint mysteriously turned up in many settlers homes. Sailcloth was salvaged and used for horse rugs and tent flies. Soon after the wreck “Fiji tobacco” was being advertised around Victoria. A Customs officer, trying to prevent some of the looting, was assaulted by looters and thrown over a steep cliff. He managed to cling to a bush lower down until rescued. In 1894 some coiled fencing wire was salvaged from the wreck. Hundreds of coils are still strewn over the site of the wreck, encrusted and solidified. The hull is broken but the vessel’s iron ribs can be seen along with some of the cargo of concrete and pig iron. Captain Vickers presented Bill Robe with his silver-cased pocket watch, the only possession that he still had, as a token for having saved his life and the lives of some of the crew. (The pocket watch came with 2 winding keys, one to wind it and one to change the hands.) Years later Bill passed the watch to his brother-in-law Gib (Gilbert) Hulands as payment of a debt and it has been passed down the family to Gilbert Hulands’ grandson, John Hulands. Seaman Julius Gebauhr later gave his knife, in its hand crafted leather sheath, to F. J. Stansmore for caring for him when he came ashore. The knife handle had a personal inscription on it. A marble headstone on the 200m high cliffs overlooking Wreck Beach, west of Moonlight Head, paying tribute to the men who lost their lives when Fiji ran aground. The scene of the wreck is marked by the anchor from the Fiji, erected by Warrnambool skin divers in 1967. Amongst the artefacts salvaged from the Fiji are bisque (or china) toys, (including miniature animals, limbs from small bisque dolls), rubber balls, a slate pencil, a glass bottle, sample of rope from the distress rocket and a candlestick holder. These items are now part of the Fiji collection at Flagstaff Hill Maritime Museum, along with Captain Vickers’ pocket watch and Julius Gebauhr’s sheath knife. Flagstaff Hill’s Fiji collection is of historical significance at a State level because of its association with the wreck Fiji, which is on the Victorian Heritage Register VHR S259. The Fiji is archaeologically significant as the wreck of a typical 19th century international sailing ship with cargo. It is educationally and recreationally significant as one of Victoria's most spectacular historic shipwreck dive sites with structural features and remains of the cargo evident. It also represents aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The Fiji collection meets the following criteria for assessment: Criterion A: Importance to the course, or pattern, of Victoria’s cultural history. Criterion B: Possession of uncommon, rare or endangered aspects of Victoria’s cultural history Criterion C: Potential to yield information that will contribute to an understanding of Victoria’s cultural history. Doll’s arm salvaged from the wreck of the Fiji. This moulded arm, made of bisque (sometimes described as china or porcelain) is for a small doll. Its hand has the fingers touching each other with the thumb tucked into the palm. The white coloured arm is finished with glazed paint. The arm is discoloured in places with a tan colour. The arm is solid rather than jointed and goes from hand to upper arm. There is a groove around the top of the arm, which would enable the arm to be attached to the cloth body of a doll.1891, china, shipwrecked coast, flagstaff hill, flagstaff hill maritime museum, maritime museum, shipwrecked artefact, flagstaff hill maritime village, shipwreck coast, warrnambool, porcelain, doll, moonlight head, wreck bay, cargo, bisque, toys, doll's arm, doll's limb -
Warrnambool and District Historical Society Inc.
Artefact, Courting chain, 19th century
A courting chain was carved by a man and given to the girl he was courting. This was a common European practice in the past, with Welsh courting chains surviving from the 17th century, though the practice may have gone back even further than that. The chain indicated that man was a capable artisan and was occupying his hands in a healthy way, particularly when the lady was present. The many types of loops and chains carved all had symbolic meanings. The cage with the wooden balls inside was said to indicate the desire of the man for children and the number he would like. The symbolism of the arm and hand with the two digits touching is not known. This courting chain has no known local provenance but it is an interesting object as an example of the customs of the past. It will be useful for displays. This is a wooden carved courting chain. One end is in the shape of an arm and hand with the thumb and first finger touching at the tips. Then there are three chains linked to the arm with a peg inserted into another loop at the end. Next, joined to this, is another loop attached to a wooden cage which has two wooden balls inside. The chain is finished with a carved turret structure at the end. courting chains, history of warrnambool