Pens, nib pens and later fountain pens, with suitable inks, were commonly used for writing communications from the 18th century to the mod 20th century. Fountain pens continue to be used and enjoyed. Dip pens with a wide variety of nibs are used for calligraphy writing, a hobby enjoyed by many people. The quality of the pen handle, the nib and the ink all work together to produce fine handwriting that expresses the character and mood of the writer. This Bakelite ink case has been specifically moulded to snugly contain an ink bottle, with just enough room to wrap the bottle with a padding or card or blotting paper. The screw top lid fits the case well and this container would be a good way to travel with ink because any spillage would be kept within the waterproof case. The Bakelite material is lightweight and strong. Ink bottle cases, or travelling cases, have been made as an accessory for nib pen writers. The first patent for a “pocket-case for bottles”, a wooden case, was applied for in the US in 1891. Other materials such as steel, pewter and aluminum as well as Bakelite have also been used. The British Museum has an elaborately decorated bronze ink pot holder that is inlaid with turquoise. Today ink bottle cases are even available in fabric with loops to attach to a belt. Bakelite, the material used for this ink bottle case, is made from synthetic materials and is an early form of plastic, developed in 1907 and used extensively until the 1940’s. It is still in used today for specific applications but has been largely replaced by more modern forms of plastics. This ink bottle case carries the imprint of Mabie, Todd & Co. (Aust.) Pty. Ltd. This form of company name was used from 1938 to the mid 1950’s. The Swan ink bottle’s information says it was made by Mabie, Todd & Co. Ltd., London and Sydney, so dates the ink bottle from about 1908 until 1934. (Australian newspapers display advertisements dated 1908 until 1934 for Sydney wholesalers and agents for Mabie, Todd & Co. Ltd.) ABOUT PERSONAL FOUNTAIN PENS (FOUNT PENS) A 1917 newspaper advertisement recommends that the owner of a “Swan” doesn’t lend it to anyone else to use due to its qualities of it personalised to the owner. It reads “Don’t lend your “Swan” fountpen, recommend it, but don’t let other people use it. You see, a good pen doesn’t wear, but its “tamper” (or spring) works into the writer’s pressure and manner of holding. Another person with a dashing style of writing may strain it do that it will no longer feel just like your own.” This personalisation of nib pens may be the reason that legal documents in the past being acceptable only if they were signed using a ‘wet ink’ pen. Forgeries of signatures could be easily detected as the nib takes on the character of the pen’s owner. A ballpoint pen was not acceptable. This is a strong contrast to modern times when a digital signature is widely accepted. ABOUT MABIE TODD Pty Ltd. The American company Mabie Todd began by making pencil cases in New York in the 1860’s. The Bard Brothers, makers of Gold nibs, joined Mabie Todd and the company was established in the 1870’s as Mabie Todd and Bard. In 1878 the company filed a patent for the design of a fountain pen and in 1884 the first Swan fountain pen was released. In 1884 a Mabie Todd and Bard office and showroom was established in London. In 1906 the company’s name changed to Mabie Todd & Co, New York. The UK offices also used this new name and in 1907 the UK began producing their own Swan pens. Manufacturing was going so well in England that New York sold their rights to European and Colonial business to the new Mabie Todd & Company Ltd of England. By the end of the 1930’s all components for the pens were being made in the UK; the pens in the London factory, the gold nibs in Birmingham and the ink in Liverpool. Newspaper articles from 1934 stated that Mabie Todd were large buyers of Tasmanian iridium, which had been welded with gold and used since 1834 for the tips of nib and fountain pens. Fountain pen points were the largest market buyers for Tasmanian iridium, which was classed as “the best in the world”. Production growth continued up until WWII times, when the headquarters and main factory were destroyed. Mabie Todd & Company Ltd of England rebuilt out of the inner city and by 1946 pen production began again. The market for nib and fountain pens was diminishing by this time, with people beginning to use the new ballpoint ‘Biro’ pens. The Mabie Todd bought shares in Biro Pens and in 1952 became Biro Swan. They went on to make more ballpoint pens than any other manufacturer in Britain. The ink refills that Biro-Swan produced came in five different viscosity or thickness xhoices, depending on the season and location of where the pen would be used . Along with the ballpoint pens, Biro-Swan also introduced a range of Calligraph pens to attract those following the new trend for italic writing. In 1948 Mr. T. Burke, a director for Mabie Todd & Co. (Aust.) Pty Ltd., announced that there would be a £40,000 factory built in Sydney in 1949 for the manufacture of ink. The plant for the factory would be imported from overseas. Sadly the company struggled against competition and in 1956 Mabie Todd closed business and no more Swan pens were produced. The ink bottle and container was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill ) According to Berry, her mother Gladys made a lot of their clothes. She was very talented and did some lovely embroidery including lingerie for her trousseau and beautifully handmade baby clothes. Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928 . Its first station was in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill and purchased a share of the Nelson Street practice and Mira hospital (a 2 bed ward at the Nelson Street Practice) from Dr Les Middleton one of the Middleton Brothers, the current owners of what previously once Dr Tom Ryan’s practice. Dr Tom and his brother had worked as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He had been House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan had gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. When Dr Angus took up practice in the Dr Edward and Dr Tom Ryan’s old premises he obtained their extensive collection of historical medical equipment and materials spanning 1884-1926. A large part of this collection is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station. and an ALDI sore is on the land that was once their tennis court). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served with the Australian Department of Defence as a Surgeon Captain during WWII 1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. He had an interest in people and the community They were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. The ink bottle case is significant for its association with writing methods commonly used during the colonisation of Australia until the mid-20th century. The protective Bakelite case demonstrates the value placed on caring for the user’s supply of ink and protecting other belongings of the user, enabling writers to easily carry and safely transport their ink without the concern of spilling it. The case’s design is a good example of the use of new technology. The properties of Bakelite have enabled its moulded design and make it waterproof and lightweight, easily cleaned, closely fitted to the shape of the ink bottle within and lid and base join together using a smooth screwing action. The maker’s marks have also been moulded into the Bakelite, therefore not distracting from the simple but elegant design. This ink bottle case also represents the period of early to mid-20th century when handwriting materials for writers using ink and nib pens were imported into Australia and developed for the Australian market and sold by wholesalers on behalf of overseas companies. Vintage brown Bakelite travelling ink bottle case (or holder, pot, well) containing glass ink bottle and original textured cardboard liner, made by Swan Ink, Mabie, Todd & Co. (Aust) Pty.. Ltd. The Bakelite container is shaped to fit snugly around the ink bottle. It still retains its original shiny finish, the lid screws on and off perfectly. The maker’s name is embossed on lid and base of the Bakelite container. The inkwell contains a glass Ink bottle with a tiny amount of dried up ink Swan triple filtered ink inside. The bottle is cylindrical with curved shoulders tapering to a neck of around 2cm. The white metal screw-on lid and the white and red paper label on the side of the bottle both have a printed description of the ink and maker. Circa 1934-1950’sBAKELITE INK CASE - embossed on either side of the lid “ “SWAN” INK / ”SWAN” INK “ - embossed into base, written in a circle “MABIE TODD & Co (Aust.) PTY. LTD.” GLASS BOTTLE – printed on lid “SWAN”/ [corporate logo combining letters ‘M, T, co’]/TRIPLE FILTERED/ INK.” - printed on label “SWAN” INK /FOR FOUNTAIN & / STEEL PENS / A BLUE BLACK INK OF/ THE FINEST QUALITY/ MADE IN ENGLAND/ MABIE. TODD & CO LTD …….. LONDON. SYDNEY/ Makers of “SWAN” Pens, Gold Pens & Ink“ - moulded into the base of the ink bottle and written around the bottom outside edge of the bottle are the words “THIS BOTTLE ALWAYS REMAINS THE PROPERTY OF/ MABIE TODD/AUST”flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ink bottle holder, ink bottle case, ink bottle pot, travelling inkwell, portable inkwell, travelling ink pot, travelling ink bottle case, ink bottle, inkwell, ink well, swan ink, bakelite, dip pen ink, nib pen ink, fountain pen, fontpen, writing methods, stationery, mabie todd & co, swan fountain pens, biro-swan

Donated by Hans Van Zwol. Believed to have been worh by his son.Australian Army Green Coveralls. Vertical zip on left hip for accessing clothing worn underneath. Vertical zip and pocket on right hip. Slanted zip pockets on both sides of the chest. Zip opening from neck to crotch in the front of the coverall. Velcro closures on ends of both sleeves. Velcro belt across inside of the back of the coverall for adjstment of waist fit. Cotton loop hanger on inside neck top. Green item label on inside neck top. White item tag located below the item green label.On green label - A.G.C.F. Victoria 1987 Size 85-90L. NSN 8405.66.060.4201. SERVICE NO. NAME..... On white tag - This tag is for identification only please remove before wearing. Docket No. 10663/3. Order number 29741531. Size 85-90L Garment No. 20723. Remarks H34.coveralls mens austraian army colour green

Standard issue battle jacket for the Royal Australian Artillery, issued by defense department. Pattern 1949 Khaki Battle Dress Blouse. Two deep button breast pockets, Four buttons on right side concealed by right side jacket. Belt hem located at the bottom with buckle. Hemmed arm cuffs with one button on left and right sleeves. Two internal pockets on right and left side. Cord lanyard hanging from left sleeve. Patch with words 'Royal Australian Artillery' embroidered in red on navy on both left and right shoulders. Separate embroidered crown placed above both embroidered text patches. Material with embroidered crown attached with button at the top on right and left shoulder. Crown is made up of red, purple, cream and brown string. Material loop attached inside top of jacket at the neck.Sewn patch with inscription R. J. Hatch & Co. 1950 Size......... MADE IN AUSTRALIA Regimental No. ...................... Name Stamp on inner lower jacket - '170' with arrow point up to the number.military uniforms, army, battle jacket

Used for cleaning of military small arms.Used by Australain Military Forces F88 Styer Rifle Small arms cleaning kit in a olive green pouch. The pouch has a flap opening secured with three metal press studs and two internal compartments secured with Velco strips. On the front is a nylon webbing loop with a metal slide clip. The kit contains 18 items, with two multitools, a two ended green toothbrush (large and small brushes), a four piece metal rod sections which screw together to form a barrel pull through with two eyelet (long and short) flannel and two wire brush attachments. The kit also contains a black small ended long brush, and a yellow ended large brush. Two 5.56 dummy rounds are included. Also included are a small green plastic container, and a small plastic slotted top with three holes. A red painted knurled metal top attachment with a screw thread, central vent hole and slotted top for an F88 rifle is also included. On the front is a nylon webbing loop with a metal slide clip for belt attachment.8465-00-781-9564 on the ouside of the pouch. F88 stamped on red metal tool top. HP 223 5.56 stamped on the base of the dummy rounds. Arrow marked on the green plastic slotted top. S,A.F. Marked on base of small plastic container. f88, small arms, cleaning kit, australian military, styer rifle

Cloth holder for water bottle (Canteen) and drinking cup Loops (plus metal clip and metal 'hook') for attaching to belt Nil

The Samuel Browne belt is named after Sir Samuel James Browne VC. In 1858, Browne lost his left arm in battle (as a result of a sword cut) and as the dress regulations of his regiment required officers to wear their waist belts under their tunics, Browne found this ungainly and devised an external belt supported on the left-hand (sword) side by a shoulder strap. The belt had two shoulder straps when a holster was worn. In the Australian Army, a brown leather version is worn on ceremonial occasions by officers and Warrant Officers Class One of all corps, except those who wear silver dress embellishments (Armoured, Aviation and Nursing Corps). These members wear a black Sam Browne belt. Wide brown pattern stitched brown leather belt with adustable shoulder strap, brass buckle and brass loop fittings (4 at the top and 2 at the bottom) attached to the belt by stitched leather straps.Nonesam browne, belt, clothing

There are no distinguishing features on the item to be able to link it to any one event.Metal bayonet with wooden and medal handle, four screws holding the wood to the metal frame. The bayonet has a release button to free the the blade to a position as required. There is a metal scabbard to house the bayonet blade, there is a metal loop on the scabbard to hang onto a belt. There is a round sight on top of the bayonet.T4 37248military, bayonet, australian army.

This uniform was worn by Sister Winifred Ride during World War 2.. Nurses played a key role in the conflict through their care and compassion to the servicemen who were wounded and sick.The nurses uniform is symbolic of the sacrifice and service of the many women who served their country in WW2. Grey fitted, lined jacket with long sleeves, collar and lapels. Three front metal buttons buttons and two smaller buttons on each sleeve. Dark green epaulette with four metal buttons on each shoulder (Right side is faded). Two hip pockets with one button fastener. One internal pocket with small grey button. Unit patches on each sleeve and four inverted service chevrons on right sleeve at wrist. Two ribbon bars containing 5 Campaign Ribbons on left side of front, attached with standard 'brooch' fitting . Belt (same material as jacket) passes through two loops on back of jacket and is fastened by two buttons, hidden when belt is fastened. Metal buttons stamped with map of Australia with crown above and the words Australian Military Forces around. Makers label inside back below collar: " /tailors and habit makers, J .RAVENSDALE & SON Nicholas Bldg Swanston Street Melbourne". Name of owner handwritten "Sister Ride:"

Used in Building Studies at Ballarat School of Mines. The sander used to sand rough timber smooth, remove old finish from wood, put a bevel on a door, reduce the thickness of timber, dress up a poor saw cut. Also used for back cutting miter cuts for neater joints and for polishing and cutting.Stainless steel with rollers and sanding plate. Hand held. Continuous loop of sandpaper would be mounted.Maker's Plate: MILLER FALL TOOLS CATALOG 830 3 INCH BELT SANDER MODEM "C" USE 3" X 21" BELT 230/250 VOLTS 3 AMPS 25-60 CYCLES MADE IN USA PATENT 2,991,595 MILLER FALLS COMPANY, GREEFIELDS, MASS. TO CHANGE BELT PULL LEVER DIRECTION OF BELT ballarat school of mines, building studies, david flintoff, timber, smooth, miter cuts, polishing, buffing, thinning

Mauve and white abstract patterned, silk shirt maker styled dress. Extended shoulder to form elbow length sleeves. Triangular gusset at underarm. Large revere collar, which extends into a cross-over type front (no visible fasteners). Self fabric belt with covered buckle and loops. Five knife pleats at front-facing to centre front, on each side of front. Four knife pleats each side of centre back. Zip placket at left hand side. Garments from the Executors of Estate of late Frieda Kahland. See also 11400.122, 11400.363, 11400.365, 11400.366.costume, female, mauve/white silk shirt style dress

Clothing. Ladies bathing costume. Ladies woollen bathing costume. One piece, sleeveless. Rust and navy top, navy bottom with skirt. Four loops for a belt ( not included).S & M Ganther swim suits, Knit to fit.Patented 4 July1922, pure Virgin wool . Granther & Mattern, San Francisco.costume, female, swimwear

Two piece white box and cover. On lid of box is a large 'b' with Berlei in the loop of the b with the Berlei emblem. Label on end of lid. Box contains item 11400.225 (Corset)Berlei Girdle 11080/36. Indicator fitting 11AD. Pink back lace Corset Inner Belt.costume, female underwear, corset box

Cream silk fabric dress with floral pattern of pink flowers and green leaves,Short set in sleeves, gathered at the top edge of hem. Round neckline with box pleat at centre front (9cm) with folded inserts on either side of centre seam front and back. Side zipper fastener (23cm). Fabric belt at waist secured by two cotton loops at side seams.costume, female, dress

Bag bound with silver grey tape, 3 opening sections, 1 with purse snap closure, 2 with press studs, 2 loops at top to suspend bag from belt.costume accessories, bags

Clothing. Woman's grey, cream and black dress, with fine all-over swirling fern leaf design fabric.Eleven gores in skirt, home stitched dress. Long sleeves with a turn-back cuff 5cm wide at the peak, tapering to 2.5 cm wide at the 4 cm long opening, which fastens with one metal press-stud. The cuff is trimmed with decorative rouleau loops and coils, giving a flower petal effect. This effect is repeated on the peaks of the revere collar. A rouleau looped bow trims the centre front neckline. A shaped, peaked band on the front bodice extends from the side seams to give the effect of a belt at the back. This is stitched in place and trimmed with three rouleau coils-centre coil 2 cm in diameter, flanked by two coils 1-2 cm in diameter. Skirt has three stitched down pleats, ranging in length from 7 cm to 8.5 cm long,on either side of front skirt.costume, female, woman's grey.cream and black dress

Clothing. Navy blue textured fabric possibly crimplene. Long tapered sleeves fastened with three covered buttons and loops at the wrist. High back neckline shaped to a V shape at the front. Centre front opening fastens with sixteen covered buttons and loops. Front yoke has a rouleau trim of fleur-de-lyse, and circular coils from 1 cm to 1.5 cm diameter. Side front panels are shirred at the yoke seam, and gathered at the shaped waistline panel. Waistline has a diamond shaped panel- 2.5 cm wide at the side seams, and eleven cms wide at the centre. Where the buttons extend over the midriff panel, the panel is shaped in a 7 cm V shape. Midriff panel extends into a belt at the side seams, fastening at the centre with a press-stud, and decorated with a flower of seven rouleau coils-1 cm in diameter. Hand stitched hem.costume, female, long sleeved navy dress

Clothing. Navy blue leather: 3.5 cm by 106 cms. Silver metal buckle 5.5 cm by 4.0 cm. One .9 cm wide leather loop beside buckle. Five round holes to fasten belt. Three additional holes have been added to further tighten belt, or to accommodate a new wearer.MADE IN AUSTRALIA BY DOMO P/L VIC. 1172 STEER HIDE 95 cm 38''.costume accessories, male, leather belt for band uniform

Else Oertel was a German internee in Camp 3A from 1940-1945. Woodworking was popular amongst the internees and it is probable that another internee in camp 3 made the buckle for Else. Her daughter, Else-Lore Hukins donated the item.Hand carved wooden (belt) buckle. Polished front with initial. Painted red sides. 2 x metal loops on back for threading belt, etc. through. Inscription on back also.1. "E" 2. "Januar 1940 VB"tatura, ww2, camp 3, internment, internee camps, costume, accessory, clothes, handcrafts, woodcarving

Handmade by POW's at Camp 3Macrame belt in colours of dark blue, light blue, red and cream. Pointed one end. Metal buckle attached to belt with redddish brown button and red and cream loop. Macrame insert in centre of belt. Buckle made from a penny rejiggedbelt, macrame, wagner w, camp 3, tatura, ww2 camp 3, handcrafts

Wool picking machine designed to separate locks of wool before it is carded and spun. The picker opens the wool’s locks which makes it easier to send the fleece through a carding machine. It does this by teasing the fibres (which can also be done by hand just by pulling the lock structure apart), but a picker does this in bulk and much quicker than what can be done by hand. It is possible to spin fibres directly after the picking stage; however, it is usually more desirable to card and blend them with other fibres. Typically, at a textile mill, a picking machine can separate enough lengths of fibre for a full day’s work after just a single hour. It will also help to remove any vegetation matter or other any unwanted elements that may be present in the wool. The quality of the casting on this machine suggest that it was made locally, either in Australia or New Zealand. Mike Leggett, the donor of the machine, acquired it from New Zealand where the seller said it had been used by his father to pick wool to make hand stuffed horse saddles. Mike attempted to used it a couple of times to pick alpaca hair, but the speed of the attached motor caused damage to the fibres. The motor is thought to be an added attachment, sometime around the 1960s judging by its age, while the machine itself is thought to be dated around the 1920s. The machine works by inserting wool through the rollers. Initially there was a conveyor belt feeder system which was powered by the handle on the side. This conveyor belt has been removed however, most likely due to age and deterioration. Wool is now fed through the initial teeth and is met by a spiked rotating drum which works to separate the fibres. The separated fibres would then complete a loop of the drum before being dispatched somewhere below, around where the motor presently sits, at a rapid rate of speed. Typically this wool will be collected in a closet or large catchment area, as can be seen from the 8:47 minute marker in the linked video (link - https://www.youtube.com/watch?v=kMjx-t3tH3A). It is not apparent how the wool is collected with this machine. Red and green machine with four green legs currently attached to a wooden pallet with wheels for easy movement. The green legs lead up to a red central circular barrel from which many attachments are present. Also present on the wooden pallet is a small black motor which is attached by a rubber belt to the central drum inside the red barrel. The belt spins the wooden drum via a dark red circular plate attached to the side of the drum. On the other side of the red barrel, a green handle extends for turning the picker’s conveyor belt feeder system. Two green walls extend forward from the central red barrel, guarding either side of where the conveyor belt would have been. At the start of these walls is a wooden cylinder, which the conveyor belt would have wrapped around, followed by two interlocking gears which rotate and accept the fed wool. The red roof extends over the central cylinder from here, securing the wool inside and protecting hands from the heavily spiked internal wooden cylinder which rotates and separates (picks) the wool. Extending over the top of this red roof is a green handle which reaches to the back of the machine (not pictured). Here it accepts a weight to ensure pressure is always present for the initial feeder interlocked gear teeth. There are two large gear cogs on the rubber belt side of the machine and 3 small gear cogs on the handle side of the machine, all coloured green. A green handle is also present at the rear of the machine, below the location from which the weight is hanging. A power cable extends from the motor and there are two adjustable metal rods on the top of the machine, the purpose of these rods is presently unknown. Black texter. On top of drum. Wording: HG3707 Wording. Imprint: BRACEWIND BLYN On motor. Wording AEIwool picking, textile manufacturing, wool processing

Worn as a day frock by Edith Finger.c 1930s Green floral patterned short sleeved street dress. Round neck with roulet trim at yoke. Long waisted with roulet trim, half belt at waist with buckle doing up at back. Placket with press studs and hooks and eyes. Buttoned at back at neck with four covered buttons and loops.costume, female

Pocket knife, blade on one end and pig sticker on other end with loop to hang on beltScouting on blade

The first nutcracker tow at Falls Creek was the Nissen Tow operated by Toni and Skippy St. Elmo. It had a capacity of five people at one time and cost 6/- day in 1951. The tow was powered by a Buick engine and operated from 1951 until 1960. Other nutcracker tows at Falls Creek were the Village (left side), Village (right side) and the Dog Patch Tow, By the 1960s nutcracker tows were rapidly being replaced in the developing major resorts although a few rope tows remained in use largely to assist access over areas of fairly flat terrain.This item is significant because it came from the original Rope Tow, Nissen, at Falls Creek, VictoriaThe nutcracker (metal clamp) has two handles that clamp onto the rope when closed together. The clamping part of the nutcracker is at the end near the hinge. The nutcracker is attached to a belt via a short rope, and a small metal loop is attached to the belt, onto which the nutcracker can be stored whilst skiing. When riding the nutcracker, the rope attachment is worn to the front which can then be pushed around to the side whilst skiing. The belt needs to be worn tightly around the hips.falls creek tows, nissen tow, toni and skippy st. elmo

Standard dress uniform jacket for soldiers.Khaki coloured single breasted jacket fastened with four centre plastic buttons and a belt. Belt attached to jacket on back via two leather loops buttoned around a fabric loop. Jacket carries two breast pockets on exterior with flap, each fastened with single plastic button and two metal press studs. Two hip pockets with flaps, unfastened. Interior is lined with synthetic fabric; one interior chest pocket on the left hand side underneath which is a manufacturers label (transcribed below). Small square paper tag sewn into left jacket interior (transcribed below).Interior label reads "E.W. P/LTD./SOUTH AUSTRALIA/1968/[broad arrow symbol]/SIZE 36 SHORT/CLASS 8406/66-019-8479/ARMY No./NAME/DRY CLEAN ONLY./REPRESS USING IRON AND DAMP CLOTH OR MEDIUM TO HOT STEAM IRON./CREASE UPPER HALF OF LAPELS ONLY." Written on the label is handwritten text "J.V." And "12/0L/0/67." Stamped in purple ink "BATCH No./385." Paper tag reads "62000/LOT 12 36S/GLOBE6/67."military, uniform, vietnam war, 1960s, dress uniform, beechworth, returned services league

Issued as a uniform item post WWII until the late 1980s. It was also used parade dress until its replacement of a newly designed uniform made of polyester. This particular sample belonged to CPL K. Howe 3144504 whist in the Army Reserves 1982 to 2005The khaki battledress was standard uniform issued post world war two and used until the introduction of the polyester uniform in the late 1980s. This uniform belonged to CPL K. Howe, the donor providing good provenance. In conjunction with other items of militaria donated by the Howe family. Item can be to tell a story of multi generations of military service of the Howe familySingle breasted hip-height jacket in khaki fabric, fastened with five buttons down the centre of the chest. Two pleated breast pockets with triangular flaps fastened with two buttons. All buttons plastic and khaki green in colour. Jacket is fastened around the hips with a belt, attached on left hand side and buckled in a rectangular metal buckle on right hand side. Both left and right sleeves bear two patches, a double chevron and red rectangular patch rounded to follow the seam of the shoulder, with embroidered text. Navy lanyard looped around right shoulder, held in place by epaulet and tucked into right side pocket. Red patch reads "ROYAL AUSTRALIAN ENGINEERS" Internal left chest label reads "A.G.C.F./VIC. 1981/[broad arrow symbol]/6405.66.025.6408/SIZE OF CHEST/SIZE 99-102R/MACQUARIE 80/BATCH J/DRY CLEAN ONLY/CREASE UPPER/HALF OF/LAPELS ONLY/No. 3144504 [handwritten]/NAME/CPL K. HOWE [handwritten]"jacket, battledress jacket, battledress jacket khaki, royal engineers

Mid-length shift dress in light grey-blue. Dress consists of two breast pockets, each with rounded flap closure held in place by two press studs. Dress is fastened down centre with three silver buttons held in place with a metal ring (only two buttons remain). From waist line down, dress is fastened by a hidden zipper and hook and eye. Waist line is pleated and carries two loops on the back, through which a fabric belt (0030.2) is threaded. Two fabric loops on each shoulder may have been used to hold epaulettes or similar. Dress sleeves are rolled up by 40 mm. Collar is notched. Interior label on left side at waist height reads "IYD CLO CO/VIC./8410-66-000-000/SIZE 18/ARMY NO........../NAME............"

This belt was manufactured for military service. It is presumably a World War Two era article of Army uniform.This Army belt was presumably made and used during the World War Two era and therefore has historic value. Brown leather belt with a brass buckle. The belt has twelve holes in two rows at one end for fastening into the buckle. The very tip narrows to a point. There is light brown stitching along the edges of the belt. There are two brass studs which hold the leather in a loop of the other end. There is an additional piece of leather fixed to this looped edge for holding the other end in place. The buckle is made of a silver coloured brass and has two rods which pass through two of the twelve holes for fastening. The buckle also exhibits blue/green copper corrosion in several areas. belt, war, uniform, army, royal australian army, world war two, ww2, wwii, second world war

Awarded for long and efficient sevice in the colonial era Silver Medal mounted on a decorative arm. Ribbon is made up of two 9mm Violet Bars set astride a 14 mm off white bar. Ribbon is susbended by a silver hanging loop Obverse face has a St. George Cross with 5 stars inside of a belt surmounted by a crown. This is surrounded by the words Local forces Victoria. The Reverse of the medal has " For long and efficient service" embossed on itFranz Kaaden PTE 1st Battn Inf BDE5/6rvr, officers and sergeants, long service medal, victorian, colonial

Used to carry pocket knife on belt and manufactured by Holden and FrostMade and sold by Holden and FrostLeather pocket knife holder, loop over with press studleather, knife holder

For use by soldiers for carrying personal objectsManufactured and sold by Holden and Frost Light brown coloured leather pouch with rear fastening cover, strap inside for holding contents firmly Brass loop and rivets on back.Holden and Frost 1916military, belt pouch