This is a New Testament in Chinese given to Thomas Wong Cheong on the occasion of his baptism in August 1886. Thomas Wong Cheong (also written Thomas Wong Tong) was a Christian Catechist appointed by the Foreign Missions Committee of the General Assembly of the Presbyterian Church in Victoria. He worked in Warrnambool, ministering to the local Chinese Christian community for 31 years. He died in 1923. A Chinese Church, under the auspices of the Presbyterian Church, was erected in Ryot Street, Warrnambool in 1892. By the 1930s the Chinese community in the Warrnambool area had dwindled to a very few in number and the Ryot Street building was demolished in 1979. This is a significant book because of its association with the Chinese community in Warrnambool and the catechist Thomas Wong Cheong. The Chinese Church and the work of Thomas Wong Cheong are of importance in Warrnambool’s history from the end of the 19th century to the early years of the 20th century and this book would have been well-used during this time. This is a hard cover book with a black cover and the words, ‘New Testament’ printed in gold lettering on the back page (probably the front page when being read in Chinese). The text is entirely in the Chinese language with the Chinese characters in columns ruled longways. The signature of Thomas Wong Cheong (Tong) is written four times in blue and red ink. There is an inscription on the back page (front of book) and a page with a yellow background and black printing. Some of the pages have been torn (silverfish damage) and the edges of some pages have been stained. Most of the pages have four or five holes on the inside edges, suggesting that the book has been re-bound from a previous binding. There is a pink sticker of the Castlemaine bookbinder on the inside front cover.‘Presented to Thomas Wong Tong on the occasion of his Baptism, Creswick, Victoria, August 1st 1886, T. Angwin, Wesleyan Minister.’ chinese in warrnambool, warrnambool, history of warrnambool

This coat was issued to Airman Bernard Farley in 1976 as an initial issue of uniform. Bernard was enlisted in the Royal Australian Air Force in Warrnambool on 26th January 1976. This item is a Royal Australian Air Force uniform that was issued for the airman Bernard Farley. It has historic and social significance as an item of local military history. It is also in near perfect condition.RAAF Blue Gaberdine Greatcoat/Overcoat. Double Breasted. Belted at waist. Partly lined inside body; sleeves fully lined. Two vertical pocket openings at belt height give access to large inner pocket and to separate inner clothing. Double line of 5 Gold coloured plastic(?) buttons with Crown and Wingson on left and right front of coat. Single black plastic button on inside of coat immediately behind top left gold button. Epaulettes on shoulders are attached at outer end and have a small gold coloured button and button hole attachment at inner end; 'RAAF' sewn in lighter blue thread on outer end of each epaulette. Sleeves have 3 small gold buttons on cuffs.Attachment inside collar reads; A.G.C.F. (Australian Government Clothing Factory) Vic 1976. Broad Arrow Symbol. 8405.66.013.6603. Size 3L. No. NAME. Attachment inside lower left reads; handwritten, 17481, E746813, 3L,30560. 27.Blue Stamp - S broad arrow Nraaf, great coat, royal australian air force, r.a.a.f., air force, uniform, coat, bernard farley, farley, airman, warrnambool, warrnambool rsl

This item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) 1A Service Dress Uniform 1A - Tunic (Jacket - Blue Grey). This uniform was in the period 1966 - 2001 as the primary uniform. Service Dress is approved for wear as either ceremonial dress or working dress when employed in office or business type environments. The Tunic consists of a jacket has a lapel collar, with two external chest pockets and exposed pocket flaps, two side jacket pockets with external flaps and two internal jacket pockets positioned just below the external chest pockets. There is a crescent shaped cloth badge 'AUSTRALIA' sown at the side/top of each sleeve and Squadron Leader - rank stripes sown around each sleeve on the upper wrist area. The Tunic is closed with four gold buttons down the front. Each button is inserted through a small round hole sewn into the right side of the tunic front and held in place at the rear with a safety pin. There are four corresponding button holes sewn into the left front of the tunic to fasten the jacket in the normal closed position when worn. Maker: Australian Government Clothing Factory (A.G.C.F.) - Coburg Victoria The Tunic has two military decorations attached above the exterior left chest pocket. The decoration are: 1. Conspicuous Service Medal - Yellow and Green right sloping diagonal strips 2.. Defence Service Medal (with one clasp) - Blue and Gold upright stripes and round metal clasp positioned centrally. The DSM is awarded for 15 years service and a clasp is awarded for each additional 5 years service.

This item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) Working Dress (Jacket - Blue Grey). This uniform was in the period 1966 - 2001 as the primary daily uniform in the office environment. Polyester working dress is approved for wear employed in office or business type environments. The short waist length jacket consists of a jacket has a lapel collar and zip front, with two external chest pockets and exposed pocket flaps, There are portlets on each shoulder that are fastened with a black plastic button. This button has a crown over eagle in flight on the front. Rank slides are slid onto these portlets and this jacket has Squadron Leader rank slides on the portlets. is closed with four gold buttons down the front. Each button is inserted through a small round hole sewn into the right side of the tunic front and held in place at the rear with a safety pin. There are four corresponding button holes sewn into the left front of the tunic to fasten the jacket in the normal closed position when worn. The waist belt is part knitted on the sides and cloth on the front and rear. There is also one interior pocket on the right side below the exterior breast pocket. Maker: Australian Defence Industries The Tunic has two military decorations attached above the exterior left chest pocket. The decoration are: 1. Conspicuous Service Medal - Yellow and Green right sloping diagonal strips 2.. Defence Service Medal (with one clasp) - Blue and Gold upright stripes and round metal clasp positioned centrally. The DSM is awarded for 15 years service and a clasp is awarded for each additional 5 years service.

This motorcycle club overlay belonged to former Roo BC [Roo Bike Club] President Tony Shaw, and dates from the mid 1970s.Sleeveless blue denim jacket with green and yellow trim to the sleeve holes, with various patches to the front, and a large club patch on the back.gay, motorcycle club

This Dolphin Motor Club, or DMC, overlay belonged to Jasper Laybutt, a highly active member of the Sydney LGBT community of the 1980s and 1990s, co-founding organisations like Wicked Women, Girls and Guys of Disgrace (G.O.D.), and Boys Will Be Boys. Sleeveless blue denim jacket with light and dark blue ribbon trim on the sleeve holes, with cotton patches and metal and enamel badges on the front, and a large club patch on the back.motorcycle club, transgender, gay

This Roo BC overlay was worn by Colin Simon int he 1970s and 1980s, and documents the wealth of club activities undertaken by one of the earliest gay motorcycle clubs in Sydney, NSW, Australia.Sleeveless blue denim jacket, or overlay, with yellow and green ribbon trim on the sleeve holes, and a large number of cotton patches, as well as metal and enamel badges on the front, and a large club patch on the back.motorcycle club, gay

This Dolphin Motor Club overlay was worn by Paul Costello in the late 1980s and early 1990s.Sleeveless blue denim jacket or overlay, with light and dark blue ribbon on the sleeve holes, with cotton patches and metal and enamel badges on the front, and a large club patch on the back.gay, motorcycle club

This is one of a series of calendars published annually by East Gippsland Historical Society.This item is a useful reference tool.A 2011 stapled calendar, titled "Old Views of Gippsland". On the purple coloured front is a black/white photograph of The Blue Duck Hotel at Angler's Rest on the road to Glenn Wills C/1940. It contains early photographs of East Gippsland, one for each month. There is a hole for hanging. The title is at the top and the year at the bottom in black print. calendar-old-views-of-gippsland photographs-historic-gippsland

This is one of a series of calendars published annually by East Gippsland Historical Society.This item is a useful reference tool.A 2014 stapled calendar, titled "Old Views of Gippsland". On the blue coloured front is a black/white photograph of carriage horses being crossed through a lake entrance presumed to be Lake Tyers around the turn of the century C 1900 . It contains early photographs of East Gippsland, one for each month. There is a hole for hanging. The title is at the top and the year at the bottom in black print.

This item is one of a series of calendars compiled and published by East Gippsland Historical Society.This item is a useful reference toolA 2016 stapled calendar, titled "Old Views of Gippsland". On the light blue coloured front is a black/white photograph of Tongio Gap, Omeo, showing Mitchell's coach which ran from Bairnsdale to Omeo. The calendar contains early photographs of East Gippsland, one for each month. There is a hole for hanging. The title is at the top and the year at the bottom in black print. calendar-old-views-gippsland photographs-histporic-gippsland

The plate was presented to WCB on the occasion of the official opening of the joint project Great Ocean Ingredients.Large blue and white porcelain plate with a floral border and finished with a fine blue line around the rim. An inscription sits in the centre of the plate. The base has three fine lines around the rim and two holes on the rim to hang the plate.Congratulations on the official opening of Great Ocean Ingredients Friesland Campina Dorno 27th May 2009allansford, warrnambool cheese & butter factory company ltd, great ocean ingredients, trophies, presentations, awards, friesland, porcelain

This oil painting is in a handmade, carved frame, dates back to the period of the old Warrnambool Museum and Art Gallery. The two-masted, sail-and-steam-powered ship has the sails and bow shape of a tall clipper ship plus the extra power of steam. It dates to the transition between the clipper ships with their billowing sails and the steam-powered ships, which happened in the late 19th to early 20th century. The flag flown from the stern is that of the British Merchant Navy that traded around the world to transport cargo, and later passengers, from one destination to another. The painting was originally catalogued as the "S.S. Warrnambool" although it has a different design. It was also attributed to the ship portrait painter, the renowned C.K.M. - Charles Keith Miller - but differs from his style. Further research is being carried out at this time. In 1966, between the closure of the old Warrnambool Museum and Art Gallery and the distribution of the painting to Flagstaff Hill, this painting was repaired by David Heysen, son of the German-born artist Hans Heysen OBE. David was born in Hahndorf (called Ambleside for a short period of time), South Australia, married Lyly Refshauge from Melbourne, and they raised a family on their property in Kalangadoo, near Penola, in South Australia.The painting's frame is an example of handmade carving and joinery created in the late 19th century. The artist has depicted the image of a historical sail-and-steam ship of the type in which cargo was traded across the world, including to and from Australia. Vessels such as this also brought migrants to Australia.Painting, oil on board, in hand carved wooden frame with floral and geometric pattern, inner border painted gold. Image of a two-masted sail and steam ship, sails raised, black funnel emitting smoke. Hull is black with white horizontal stripe and white trim around sides of deck. Three lifeboats are visible. Bow is ‘clipper shape’ with what appears to be a figurehead. A red ensign flag flies at the stern and a blue and red flag is attached to the mainmast. The frame has been assembled using Mortice and Tenon joints, one of which is exposed on the back, lower right corner. Chandelier chain has been attached for hanging. There is no visible signature, date or title on the front of the painting. The back board has empty holes spaced around the edge and is held in place by staples. The visible surface has remnants of adhesive from two rectangular attachment s. There are two small white stickers attached, one with a hand written inscription. There are pencil and pen inscriptions. The painting is protected by cardboard with inscriptions in marking pen.On back board, written in the style used by the Warrnambool Museum and Art Gallery: - On white sticker, in pen “A-P31/1-74” - Pencil “A27/1883 / Artist CKM 1883 / Title SS Warrnambool / oil on board” Written in pen by the repairer - “Repaired & re-drilled – cleaned etc. / David Heysen 11/66” Written by Flagstaff Hill’s Cataloguer - Pencil “3031” On cardboard wrapper, in marking pen: - “S.S. Warrnambool / by / C.K.M. 1883” - “A-P/31/1-74” - “3031”flagstaff hill, warrnambool, shipwrecked coast, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, s s warrnambool, charles keith miller, charles miller, steam and sail ship, british merchant navy, slipper shaped bow, 19th century sea trade, warrnambool museum and art gallery, old warrnambool art gallery, hand carved picture frame, mortice and tennon picture frame, migrants, c.k.m.

In the late 19th and early-20th centuries household heaters burned wood and coal for heating. In winter the warm air from the fireplace would flow into the room through a round flue in the face of the chimney. In the warmer months the unnecessary heater and flue was removed and the chimney cleaned. Homemakers then covered the circular flue hole with a decorative and usually inexpensive wall hanging to prevent draughts and dust. The practice was especially popular in France and Germany where a lot of the artwork originated. The covers were no longer needed after households changed over to more modern designs of heaters. The flue covers were known as Wall Art or Flue Cover Art. They were usually round and illustrated with a lithograph or chromograph print. The picture was then mounted on card, covered with glass, and framed with a brass or tin rim. The border was commonly gilt with a black stripe around the centre. There were numerous illustrations, many with a European appearance, and were easily bought through local merchants for a small price.This pretty flue cover is significant for representing a common domestic wall decoration from the late Victorian to the Edwardian eras, when solid fuel heaters were used in low to high income homes. The picture is similar to many other flue cover images, apart from the holly clutched in the girl’s hand, which gives the cover a Christmas theme. This flue cover is the only one in our collection and appears to have a unique design; the hand painted floral decoration on the glass and the two crimson rings around the edges of the frame’s white border haven’t been seen on other flue covers. Flue cover, metal and glass. Print of a young girl with blue eyes and curly blonde hair, a hooded blue cape, a silver clasp with blue stones, and a sprig of holly in her hand. The round metal frame forms a deep, white-painted, crimson-edged border for the illustration. The hand-painted blue flowers on the glass front form add to the border and give a 3-dimensional effect. The picture is between the cardboard backing and the glass front, with the metal frame holding them together. There is a metal chain attached for hanging the cover.warrnambool, flagstaff hill maritime museum, picture, handpainted, portrait, girl in blue cape, metal frame, round picture, illustration, print, holly, christmas, child in blue cape, silver and blue clasp, holly sprig, late 19th century, early 20th century, 1890s-1930s, victorain, edwardian, flue cover, flue cover art, wall art, chimney flue cover, chimney hole cover, stove pipe cover, fireplace flue cover, antique, victorian, glass frame, chromograph, lithograph, tin, brass, lithograph print, chromo print, christmas girl, blue cape, blonde girl

Enamel cookware became very popular because people wanted a way of coating iron to stop metallic tastes or rust getting into food: something acid-resistant and easy to clean without laborious scouring, something more durable than the tin linings used inside copper. Enamelware dates back to 1760 in Germany.This object is significant as an example of an item in common use in the 19th and early 20th centuries.Oblong shaped enamel dish. The white enamel has been discoloured on the inside and much rust has occurred. The remains of a blue enamel line around rim.Two large rust holes in base, and a small rust hole near rim. None.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, enamel, kitchenware, baking

The colander is an extremely useful tool in the kitchen, as it allows food to be fully drained of liquids such as water or oil. Enamelware dates back to 1760 in Germany.This object is significant as an example of a type of item in common use in the 19th Century and that is still in use today.Mottled blue enamel colander with draining holes in the base and sides. Two thin handles on lip of bowl.None.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, enamel, colander, food preparation

This Minton floor tile is from the wreck of the Loch Ard. The iron-hulled clipper ship from the Loch Line was heading for Port Phillip from London, when it ran into the cliffs of Mutton Bird Island near Port Campbell. The Loch Ard was laden with high-value cargo including luxury goods intended for display at the Melbourne International Exhibition in 1880. One notable survivor from the ship’s freight manifest was the well-packed Minton porcelain peacock, a two-meter high ceramic masterpiece of vivid glazed colours. (This is also on display in the Great Circle Gallery). The almost total loss of life and property from the Loch Ard registered as a shocking tragedy for the Colony of Victoria, at a time when social confidence and economic optimism were otherwise high. The wealth generated from Gold and Wool was increasingly being spent on grandiose private residences and imposing public buildings. The demand for quality furnishings and fittings was therefore strong. Among the products consigned to burgeoning colonial markets by the Milton Pottery at Stoke upon Trent, were their new range of colourfully patterned but very durable floor tiles ideal for the high-traffic spaces in the large civic buildings then being constructed in Australia and America. These floor tiles were “encaustic”, meaning that their designs and colours were encased “within” the depth of the tile. Rather than their decorative patterns being glazed onto the surface of the tile, their inlaid designs were created during the manufacturing process, as “coloured slips” (or liquid clay) were poured into a deep pre-moulded casting. When fired, the resulting tile was colour-fast and design-fast. The Minton floor tile is significant for its hard-wearing yet attractive design. The shipwreck of the Loch Ard is of significance for Victoria and is registered on the Victorian Heritage Register ( S 417). Flagstaff Hill has a varied collection of artefacts from Loch Ard and its collection is significant for being one of the largest accumulations of artefacts from this notable Victorian shipwreck of which the subject items are a small part. The collections of objects give us a snapshot of how we can interpret the story of this tragic event. The collection is also archaeologically significant as it represents aspects of Victoria's shipping history that allows us to interpret Victoria's social and historical themes of the time. Through is associated with the worst and best-known shipwreck in Victoria's history. A square Minton floor tile with a white background, and beige, dark blue, light blue and black geometric pattern as well as leaves in the design. The tile has corner broken off and some chipping along the edges. The reverse has five rows of five evenly spaced holes. The back of the tile has inscriptions. Made by Minton & Co. at Stoke upon Trent. This encaustic floor tile was recovered from the shipwreck of the LOCH ARD. Branded "... MINTON&CO / PATENT / STOKE UPON TRENT"flagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, loch line, loch ard, captain gibbs, eva carmichael, tom pearce, glenample station, mutton bird island, minton floor tile, encaustic tile, melbourne international exhibition, floor tile, minton tile, minton & co., stoke upon trent

This ink-well was used in the Bacchus Marsh Court House, possibly for book-keeping and/or for court records. This type of ink-well and pen were in use everywhere in schools, businesses, courts, etc before the invention of the type-writer and the ball-point pen. Clerks were usually male and a good copperplate hand-writing was admired. Ink was often mixed by hand used a powdered ink mixed with water.Of local significance in the history of the town of Bacchus Marsh.Round pewter ink-well, with hinged lid and ceramic insert. Five round holes pierced in inner rim of metal to hold pens. Two ribbed bands around exterior of pot. Two bands indented around top of lid. Insert designed to hold ink. Pen with marbled blue handle, metal nib holder and metal nib.Indecipherable imprint on bottom of pot, possibly machine markings. Illegible written marks on side of pewter pot. Ceramic insert marked on side and bottom by red and black ink.ink, ink well, hand writing, record keeping, pens, nibs, clerical work, court records

The early settlers of Victoria depended on horse drawn vehicles to farm, make roads and railways, deliver produce and transport people. Horse harnesses were an important requisite for all drivers and could be found wherever there were working horses. Horse Harnesses have played an essential role in different cultures throughout history. Simple, utilitarian horse harnesses made of leather straps and iron rings were being used in early China before AD 500 as well as ancient Greece and Rome allowing horses to pull chariots and ploughs. The Greeks and Romans were the first to use a "horse collar" which distributed the weight of the harness evenly across the horse's chest rather than relying on a "throat harness" that could damage a horse's throat or choke them. During the medieval period, European horse harnesses became more elaborate and decorative. Variations of different horse harnesses were also found in Native American and Middle Eastern cultures. Horse Harnesses usually have four basic components which include - 1. Communication - the bridle, bit and reins allows the driver to communicate instructions and commands to the horse, guiding its movement and direction. 2. Draft - the collar, hame straps, hames, traces and chains enables the horse to draw and pull the load efficiently by distributing the weight and transferring the pulling force to the vehicle. 3. Stopping - the breeching band, pole straps and breast strap helps to control or stabilise the horse and vehicle when moving downhill or stopping. 4. Support - the back pad, backband, belly band and back saddle keep the harness in the correct position and proper alignment. This dray harness is a plain, basic harness and reflects its working class origins. It was used by Mr. Oswald (Jack) Bourke with his horse and dray to firstly deliver drygoods from Sunbury to Melbourne in the 1930's and later (through the 1940's and 1950's up to 1961) when he worked on the garbage round for the Springvale City Council. This horse harness is a significant example of the equipment that was needed wherever horses were being used - particularly in the early years of Victoria's settlement by white settlers. Harnesses such as this example were used with drays, farming equipment, delivery carts and personal transportation.A leather and metal horse harness used with a horse and dray circa 1930's to the early 1960's. It is made up of a number of components. 1. A leather bridle with metal buckles and rings, blinkers and a metal single jointed, snaffle bit that has the initials M B stamped onto the leather. 2. A leather bridle with metal buckles and rings and a metal "straight bar" Eggbut snaffle bit. It has an elongated X design (with 4 dots) stamped onto the leather strap holders near each buckle. 3. A blue and white vinyl halter with one leather patched strap. The nose band and a chin strap are covered with woollen padding. 4. A pair of leather shaft protectors. They have lacing holes along each edge and a repeating design of small shapes (flowers, wings, crosses and arrowheads) which run along the front of each protector. 5. A leather strap with a stainless steel chain and catch and a maker's mark for "Glenn's Leather Goods, Pearcedale Victoria" stamped onto the end. 6. A wide leather strap covered with a webbing sleeve. It has two large metal rings and each end and one ring has a rope attached. 7. A leather strap comprised of three separate sections (two shorter and one longer) joined with two metal rings. The longer section has notches along its length and the shorter section at the other end has a buckle. It also had a maker's mark stamped on it but the mark is very worn and the writing is difficult to read. 8. An adjustable leather horse collar with two buckles and straps at the top opening and two "B's" stamped into the leather. The top of the collar is made from treated leather pieces stitched together and the underneath of the collar is untreated leather. It has a padded indentation running all the way around the collar for the hames to sit in. 9. Two pairs of long leather traces - each having a buckle and notched section at one end and each one is made with three lengths of leather spliced together. 10. A leather strap (with one spliced join) belonging to a horse harness with two shorter straps (each ending with a metal clip) attached to a steel D ring at one end. 11. Three assorted short leather straps - the top one has clips at each end and a buckle (for adjusting the length) in the centre, the middle strap has notches and a buckle and the bottom strap is white with notches and a buckle.Bridle with blinkers - "M B" Bridle - design showing an elongated X with a dot in each section stamped onto strap holder Shaft Protectors - stamped design of flowers, wings, crosses and arrowheads Strap with chain - "Glenn's leather goods / Pearcedale / Victoria" Leather Strap (with two metal rings) - Maker's stamp - "name indecipherable / SADDLER / ...OURNE" Collar - "B / B" Leather strap - flagstaff hill maritime museum and village, warrnambool, great ocean road, sunbury, springvale, dray, delivery dray, harness, horse harness, horse drawn vehicles, working horse, oswald (jack) bourke, bridle, horse collar, hames, shaft protectors

Geoffrey Blainey was the inaugural Chancellor of the University of Ballarat. It is assumed this is the first graduation in 1995 at the Chancellor does not wear the University of Ballarat Chancellor's Academic regalia. Another possibility is when Geoffrey Blainey was awarded an honorary doctorate. Academic gowns distinguish between the University's senior office holders and our graduates. Federation University's Chancellor wears a blue robe that is trimmed with gold and features a gold embroidered frog at the shoulder and gold oak-leaf braid below the arm hole. The Deputy Chancellor and the Vice-Chancellor also wear blue robes, with gold trims and different designs inclorporating the gold oak-leaf braid, ord or tassels. The members of the university Council wear black robes with a sole of gold. Our graduates wear black robes, with either a black trancher cap or bonnet (for professional octorate) with stoles, linings or trims in the colour of their discipline. Two images of University of Ballarat Chancelor Geoffrey Blainey in academic regalia. .1) Coloured photograph of Geoffrey Blainey addressing the audience at a University of Ballarat Graduation Ceremony .2) Black and white image of of Geoffrey Blainey doffing his cap at a University of Ballarat Graduation Ceremonyuniversity of ballarat, geofrey blainey, blainey, chancellor, graduation

Was the property of J. H. McNaughton who was a student of the Ballarat Teacher's College in 1929. A cream coloured paper programme, printed in blue ink, for the 1937 Ex-Students' Reunion of the Ballarat Teacher's College. It has a square hole torn out and handwriting in ink on the back page. Mr. John. H. McNaughton S.S 1074 Blackwoodballarat teacher's college, 1937, ex-students' reunion, watson, millman, young, ryan

This attractively patinated artefact was raised from the wreck site of the CHILDREN (wrecked January 1839, recovered February 1974) and was quite reasonably catalogued as a portion of a ships porthole. This identification is unlikely however, because the CHILDREN was built at Liverpool in 1824, and round portholes were not in common use until the 1850s. The catalogue identification has since been changed to "Ship's Fitting" Prior to the appearance of round portholes in the middle of the nineteenth century, the function of introducing light to lower decks was performed by square half-glassed ‘ports’ in the side of the hull (known as a port-sash) , or ground-glass ‘bullseyes’ inserted in the deck (scuttles). In historical terms, ports were always square, cut into the timber originally to allow the firing of a ships guns, and were closed in weather by a tight fitting square hatch. Flagstaff Hill Shipwreck Museum has three portholes on display that illustrate the gradual development and adoption of circular brass portholes. First in sequence is a small 12.5cm diameter window (with a deep frame for thick wooden hulls) from the 1855 wreck of SCHOMBERG. The second and third are larger 25cm diameter windows (with a shallower frame for thinner iron hulls) from the 1892 wreck of the NEWFIELD and the 1908 wreck of the FALLS OF HALLADALE . Once the apparently obvious use of the brass object is discounted, an accurate and reliable alternative classification is difficult to specify. One artefact register notes it was ‘found in about the centre of the wreck site’. This would mitigate against the possibilities of (1) ‘horseshoe frame’ joining pieces of the keel and hull at the bow of the vessel, or (2) ‘deckseat’ for a binnacle at the stern. It may support the idea of a ‘head frame’ on a cooped companionway or a ‘deckseat’ for a mainmast pump. But this is only speculation. The actual identification is not known. The wreck of the CHILDREN is of State significance - Victorian Heritage Register S116Ship's fitting, of heavy gauge brass circle, previously classified as section of ship's fitting, which was raised from the wreck of the Children. One end is broken off at an original bolt hole and the other is severed or cut at an acute angle from the inner rim. The artefact is 6cm across and 1cm deep, indicating strength and function as a substantial and finished item of moulded metal. The upper face bears sedimentary accretion stained red/brown. The rear face has been gouged by hard or corrosive materials and bears brilliant blue/green oxidisation.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, the children, brass flange, brass rim, shop fitting

Porthole, painted blue, with hinged locking bolts welded to base plate. Base plate has six bolt holes, one till with bolt and nut. Base plate has glass plate as does hinged porthole. Corrosion and paint peeling. Both plates of glass have cracks. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, porthole, ship fitting

Ceramic tea cup, possibly part of va set. Blue design on cup. Has hole in bottom side.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

This Chancellor's academic gown was worn by Emeritus Professor Robert H T Smith AM during his time as the University of Ballarat's Chancellor from 2005 -2012. He studied at the University of New England, then went on to complete a Master's Degree at Northwestern University of Evanston, Illinois and a received a PhD from ANU in 1962. He spent much of his career in Canada and upon returning to Australia had posts of Vice-Chancellor at The Universities of Western Australia & New England. Academic gowns distinguish between the University's senior office holders and our graduates. Federation University's Chancellor wears a blue robe that is trimmed with gold and features a gold embroidered frog at the shoulder and gold oak-leaf braid below the arm hole. The Deputy Chancellor and the Vice-Chancellor also wear blue robes, with gold trims and different designs inclorporating the gold oak-leaf braid, ord or tassels. The members of the university Council wear black robes with a sole of gold. Our graduates wear black robes, with either a black trancher cap or bonnet (for professional octorate) with stoles, linings or trims in the colour of their discipline. The Chancellor's academic gown is of royal blue light weight woollen cloth trimmed with gold oak-leaf braid on the facings, yoke and bottom hem; and sleeves with one gold embroided frog at the shoulder and four chevrons of gold oak-leaf braid below the arm hole. A gold embroided button and gold tassel are centred on each chevron.Makers embroidered patch - R.W. Bredin & Son, Academic, Legal Civic & Clerical Robe Makers, Melbourne, Australia federation university, university of ballarat, chancellor's academic gown, emeritus robert h t smith

This Chancellor's academic gown was worn by Professor David Caro during his time as the University of Ballarat's Chancellor from 1998-2005. Among his many roles during his long career, he was Deputy Vice-Chancellor at the University of Melbourne, Vice-Chancellor of the University of Tasmania, Vice-Chancellor of the University of Melbourne & Interim Vice-Chancellor at Northern Territory University. The Chancellor's academic gown is of royal blue light weight woollen cloth trimmed with gold oak-leaf braid on the facings, yoke and bottom hem; and sleeves with one gold embroided frog at the shoulder and four chevrons of gold oak-leaf braid below the arm hole. A gold embroided button and gold tassel are centred on each chevron.Makers embroidered patch - R.W. Bredin & Son, Academic, Legal & Civic Robe Makers, Melbourne, Australia federation university, university of ballarat, chancellor's academic gown, emeritus robert h t smith

University of Ballarat is a predecessor institution of Federation University Australia. Academic gowns distinguish between the University's senior office holders and our graduates. Federation University's Chancellor wears a blue robe that is trimmed with gold and features a gold embroidered frog at the shoulder and gold oak-leaf braid below the arm hole. The Deputy Chancellor and the Vice-Chancellor also wear blue robes, with gold trims and different designs inclorporating the gold oak-leaf braid, ord or tassels. The members of the university Council wear black robes with a sole of gold. Our graduates wear black robes, with either a black trancher cap or bonnet (for professional octorate) with stoles, linings or trims in the colour of their discipline. Large black photograph album with sticky pages. Includes photographs of 2000 recipients of University of Ballarat Honorary Doctorates:- Mary Atkinson, Jeff Kennett , Chancellor David Caro, academics and graduands.mary atkinson, jeff kennett, graduation, honorary doctorate, university of ballarat, david caro, kerry cox, mary akers, academic regalia, michael aderman

Academic gowns distinguish between the University's senior office holders and our graduates. Federation University's Chancellor wears a blue robe that is trimmed with gold and features a gold embroidered frog at the shoulder and gold oak-leaf braid below the arm hole. The Deputy Chancellor and the Vice-Chancellor also wear blue robes, with gold trims and different designs inclorporating the gold oak-leaf braid, ord or tassels. The members of the university Council wear black robes with a sole of gold. Our graduates wear black robes, with either a black trancher cap or bonnet (for professional octorate) with stoles, linings or trims in the colour of their discipline. A square metal box containing DVDs of videos of May 2011 Graduation Ceremonies. Includes the graduation hymn being played.university of ballarat, graduation, graduation ceremonies, andy smith, todd walker, r.t. smith, tim sullivan, david battersby, roger donaldson, mace, frank stagnitti, academic procession, founders hall, 1870 founders hall, strobe driver, robert t. smith

Academic gowns distinguish between the University's senior office holders and our graduates. Federation University's Chancellor wears a blue robe that is trimmed with gold and features a gold embroidered frog at the shoulder and gold oak-leaf braid below the arm hole. The Deputy Chancellor and the Vice-Chancellor also wear blue robes, with gold trims and different designs inclorporating the gold oak-leaf braid, ord or tassels. The members of the university Council wear black robes with a sole of gold. Our graduates wear black robes, with either a black trancher cap or bonnet (for professional octorate) with stoles, linings or trims in the colour of their discipline. University of Ballarat Vice Chancellor, Professor David Battersby, at the ecturn during a graduation ceremony. david battersby, graduations, academic regalia, vice chancellor

Academic gowns distinguish between the University's senior office holders and our graduates. Federation University's Chancellor wears a blue robe that is trimmed with gold and features a gold embroidered frog at the shoulder and gold oak-leaf braid below the arm hole. The Deputy Chancellor and the Vice-Chancellor also wear blue robes, with gold trims and different designs inclorporating the gold oak-leaf braid, ord or tassels. The members of the university Council wear black robes with a sole of gold. Our graduates wear black robes, with either a black trancher cap or bonnet (for professional octorate) with stoles, linings or trims in the colour of their discipline. graduations, academic regalia, robert h.t. smith, chancellor