This item is a contemporary record of engineering equipment used in farming, industry and mining in the 1920's.A Bennie, Teare & Co catalogue in a loose leaf clip folder with a blue fabric cover. It has a red seal on the front. At the side is a metal brace for page removal. catalogue bennie-teare-engineering

Basket cane rectangular with wooden brace around top with leather corners & 2 castors centre. Has rope handles each end, painted off white. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Used in commercial bakery, probably in the bakery built in the 1920s that now houses the Mordialloc & District Historical Society.Folded metal tins, two units braced together by metal straps and rivets. Tins are rectangular and bake 1 pound loaves. Black coating on outside of tins.Pressed into long sides: "608" Pressed into ends: "7 74" [very faintly]bakery, kitchen

Used in the 19th centuryAn all steel bit brace made of forged metal with a round knob on the turning handle and a screw to tighten the bit when attached. It was used in the late 19th Centurytools, carpentry tools, woodworking tools, steel

The T35 Austral was developed by Slingsby Aviation from the Slingsby T31 with the wing span increased and a larger rudder to improve performance. This was done in response to an order from an Australian gliding club. The Museum’s glider was built from a Slingsby kit imported from the UK in 1952 and assembled by the Waikerie Gliding Club. The glider came on the Australian register as VH-GFX in May 1956. It was later transferred to the Renmark Gliding Club. In 1968 it was acquired by the RAAF Gliding Club at Laverton, Victoria. The existing log book records for the Museum’s T35 Austral are incomplete. Nevertheless the information at hand shows that it was launched over 17000 times and spent about 2400 hours in the air. It would appear that the glider has not been used for many years, the last flight recorded by the RAAF Gliding Club for this aircraft being in September 1971. As far as is known VH-GFX is the only example of the type to be built. The Slingsby T35 is a modified Tandem Tutor two seat glider that had extensive service at a number of Australian gliding clubs over a period of approximately 15 years from the mid 1950s. The Slingsby T35 is an open cockpit, tandem, two-seater glider with high, pylon mounted two piece wing supported by double, wire braced, steel tube struts. australian gliding, glider, sailplane, slingsby, waikerie gliding club, renmark gliding club, raaf gliding club

A manual line marker featuring a perforated metal wheel, with powder chamber in the centre, attatched to a brace, affixed to a wooden pole. Materials: Wood, Metal, Lacquer, Paint, Chalktennis

1981 Wool Serge Officers Pants.Pants to Officers UniformKhaki Wool Serge Pants. Zip Fly. Buttons for Bracers. Two front and One Fob Pocket. One Rear Pocket R.H. Lable has attached a mending patch. AGCF VIC 1981 8405.66 025 6193 SIZE 86 L. MACQUARIE 80 BATCH A DRY CLEAN ONLY Mending Patch Attached

Wooden rocking chair with wicker base and back, rounded arms, turned front legs, all legs braced side and back. Natural wood finish. A "Grecian" style rocker.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, chair, wicker chair, rocking chair, furniture

This wrought iron "ladder-frame" bookcase is located in Penleigh's bedroom. A second "ladder-frame" bookcase with a drop-down table is located in Suzy's bedroom (item F096). They were both designed by Bruce Anderson - in the past they have been incorrectly attributed to Clement Meadmore. This type of furniture was featured in 'The Age' Small Homes Service and a similar one was featured in 'The Age' Dream Home Exhibition in 1955. From 1947 to 1953, Robin Boyd was the director of The Small Homes Service, set up by the Royal Victorian Institute of Architects in conjunction with "The Age' and he produced a weekly article for 'The Age'. Wrought iron black frame with 10 ladder slots, and 3 cross brace frames, with 6 timber shelves. Shiny metal feet, nothing covering top of metal frame. bruce anderson, walsh st furnishings, robin boyd, small homes service

Auger bits fit into the jaws of a hand brace (brace and bit), which is used to bore holes into wood. The tapered end, or tapered shank, fits into the brace, while the twisted shank and twisted point draw the bit into the wood. The twisted shank guides the bit into the wood, helping to remove chips produced by the cutters and enabling the user to bore deep straight holes. The collection pictured here includes two common patterns of twist bits: the ‘Jennings’ double twist pattern; and the ‘Irwin’ single twist pattern. Their finely pitched threaded points are typically used to cut hardwood timber.Set of thirteen auger bits, with tapered proximal ends and corkscrew spiraled distal ends. Some with tight and loose spiral patterns. Paint spots and surface rust.[size of each bit stamped on]churchill island, tool, auger bits

Brace is a U shaped frame with a wooden handle in centre, a round metal wheel at one end and a metal handle at the other end. Bits are corkscrew shaped and sharpened to make a hole in wood.trades, carpentry

Millers Falls Co. is a tool manufacturing company originally based in Millers Falls, Massachusetts. It was established in Greenfield, Massachusetts in 1868 as Gunn & Amidon by Levi J. Gunn and Charles H. Amidon. Gunn and Amidon, along with a third partner, Henry L. Pratt built a factory in the north of Greenfield. After the Greenfield factory burned down, the company was reorganized as the Millers Falls Manufacturing Co. It merged with Backus Vise Co. in 1872 to form the Millers Falls Co. In 1931 Millers Falls tools purchased the majority of the shares of Goodell-Pratt tools and merged with that manufacturer in 1932.In 1962 the company was acquired by Ingersoll Rand. In 1982, Ingersoll Rand sold the Millers Falls business to the newly created Millers Falls Tool Co. The company was head quartered in Alpha, New Jersey. Since 2002 the company trademark has belonged to Hangzhou Great Star Industrial Co., Ltd, of Hangzhou, China.An interesting an unusual tool made by the Millers Falls Tool company that continued to be featured in it’s catalogue up and till 1922. The tool was manufactured from 1897 until this date and is sought out by collectors of vintage tools.Universal Angular hand operated bit stock with spring type alligator jaws, main casting is Japanned bright parts are nickel plated item used with a bit & brace as an extension or angular borer. Millers Falls Co. USA Model 109flagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, tools, screw driver, angular hand operated driver, tool accessory

This is a destructive instrument. Perforators were used to pierce and empty the skull in a craniotomy (which is a form of embryotomy). A craniotomy is a procedure whereby "a perforation is made in the foetal skull to reduce the volume of the foetal head which prevents delivery." (Source: Medecins Sans Frontieres, 'MSF medical guidelines - Essential obstetric and newborn care - 9.7 Embryotomy'') This instrument was included with other obstetric instruments, mostly destructive instruments, given to RANZCOG from Box Hill Hospital labour ward in February- March 1998. The maternity service at Box Hill Hospital combined with St George's Hospital in Kew to be known as Birralee Maternity Service. These instruments were collected by Julie Collette, Unit Manager, St George's Kew and given to RANZCOG Museum Curator, Susan Barnett.Simpson's perforator. Stainless steel perforator with fluted handles. Various inscriptions: "ALLEN & HANBURYS LTD/ENGLAND S.S.ut" on shaft, "12" on inner surface of hinged brace, "B.H.H.L. Ward" on inner shaft of blade."B.H.H.L. Ward"destructive instruments

The photograph shows the procedure for releasing the drum brakes on PCC tram 980 and where the brace (spanner) is located on the tram. Dated 24/8/1960.Demonstrates the methodology of releasing the drum brakes on a PCC car.Photograph - black and whiteHas MMTB stamp on rear and number P25/1/248 in ink.trams, tram 980, brakes, pcc class, tramways, mmtb, st. louis b3

Wooden table - 4 long planks with dark stain. Splitting has occurred , secured with nails. Remnants of glue and varnish. Turned legs. One prop board underneath table top. Has a metal brace.

Iron and wooden brace for drilling holes. The U-shaped crank has a wooden spindle on it and along with the top spindle is allowed to freely turn under the hands without producing wear and tear on the hands. A drill bit is in the chuck.brace and bit

A Wilson Slammer racquetball racquet, with one-piece metallic frame, plastic throat brace, plastic handle with leather grip, and cord tail. Materials: Metal, Plastic, Leather, Cord, Nylon, Ink, Adhesive tape, Gluetennis

This wrought iron "ladder-frame" bookcase, which includes a drop-down table, is located in Suzy's bedroom. A second "ladder-frame" bookcase with desk is located in Penleigh's bedroom (item F085). They were both designed by Bruce Anderson - in the past they have been incorrectly attributed to Clement Meadmore. This type of furniture was featured in 'The Age' Small Homes Service and a similar one was featured in 'The Age' Dream Home Exhibition in 1955. From 1947 to 1953, Robin Boyd was the director of The Small Homes Service, set up by the Royal Victorian Institute of Architects in conjunction with 'The Age' and he produced a weekly article for 'The Age'.Wrought iron black frame with 10 ladder slots, and 3 cross brace frames, with 4 timber shelves. In the centre, there is a drop down table to use as a desk. Shiny metal feet, rubber covering top of metal frame. bruce anderson, robin boyd, dream home, small homes service, walsh st furnishings, ohm2022, ohm2022_39

The Ballarat State School became the Urquhart Street State School and the building is now used by Brace Education and Training. The sketch comes from Views of Ballarat by Niven & Co circa 1885.building, public, school, ballarat state school, urquhart street state school, views of ballarat

Belonged to JOHN WILLIAM GRINTON No 1043 C Coy 38th Batt AIF. Refer Reg No 1280 for Service Details also 1317P, 1319P. Refer 1634P for the story on the map.Trench map of France - Edition 5A Bellicourt - Montbrahain - Bran Court. Tan, wooden frame, glass front with white cardboard backing. Hanging wire attached at back with centre strengthening brace. Map stuck on white background. German trenches in blue. Top middle: France. RHS bottom rear: The Union Studio - Castlemaine sticker.documents - maps, frame accessories, military history - army

Murray is an artist with a renowned reputation within contemporary art practice. This painting was exhibitied in the 1999 Nillumbik Art Award. Oil on linen abstract painting. A painting within a painting. A stretched orange canvas with its back (black wooden support and brace) facing the viewer. It is resting on a pink floor and against a blue wall. Style is quite graphic with strong lines and flat colour. Not signed and not dated. ek prac 2015

A Prince 'Triple Threat RIP' oversize 115 Demo tennis racquet, with Prince 'Perfection 16' strings, and original handle grip retail wrap, containing plastic netting brace. Materials: Composite Materials, Synthetic Gut, Ink, Plastic, Paper, Synthetic materialtennis

Pittock collection:round tin container with nine steel drill bits * eight brace and bit drill bits * one standard drill bit * container 170 mm L x 65 mm diameter Item stored in Pittock coach builder's box, reference 13000.1.

Wooden double wash trough on wooden legs. Wooden splash back 8 cm wide. the left hand trough is stained blue. The square wooden legs are braced on either side at floor level. At each side of the trough, there are two iron rods to hold the wood in shape.uebergang, allansford, laundering, troughs

Wooden model of a four heads gold stamper battery. The gold stamper battery is a device for crushing ore. The parts of the battery are: cams; dies; guides; kingposts; mortar box; shoes; stamps (or stampers); tappets. The model belt is broken and the brace on the left hand side facing the back is missing.gold mining, mining equipment, gold stamper

Pattern 1937 khaki Web Equipment Basic Pouch with brass snap fastener and improvised belt loop at rear. The Patt. '37 W.E. equipment brass belt hooks and brace buckle have been removed to allow the pouch to be placed lower on the US M1956 belt used by Australian forces in Vietnam.equipment, accessory