Showing 158 items
matching celluloid
-
Bendigo Historical Society Inc.
Document - MALONE COLLECTION: GREETING CARDS
Document. Greeting Cards. Creamy coloured card with celluloid front. Front is sewn to card back. The card has shaped edges which follow the edges of the leaves and gold border along the edge. There is a brown horseshoe with gold highlights. It has yellow and pink pansies and a pale pink ribbon around it. On the bottom right, printed in silver is: Best Wishes. Card and insert held together with a pink ribbon. Inside is written: to George Glen from Grace Pelham.person, greeting cards, malone collection, malone collection, greeting cards, george glen, grace pelham -
Bendigo Historical Society Inc.
Document - MALONE COLLECTION: GREETING CARDS
Document. Greeting Cards. White card with embossed border with leaves at each corner. White celluloid attached to front with 4 bifurcated pins. Outline of book with Note Book in gold area and gold pen. Deep pink flowers beside it. At the bottom is a round area with Your name is in my book and below is another gold area adjoining it with Loving Friends embossed on it. Card and insert held together with pink cord. Card has pattern cut edges.Philco Publishing Co. Londonperson, greeting cards, malone collection, malone collection, greeting cards -
Glenelg Shire Council Cultural Collection
Audio - Edison Sterling Record, Thomas A. Edison (TM), The Pullman Porters on Parade, 1913
Blue Amberol Records was the trademark name for cylinder records manufactured by Thomas A. Edison, Inc. in the US from 1912 to 1929. They replaced the 4-minute black wax Amberol cylinders introduced in 1908, which had replaced the 2-minute wax cylinders that had been the standard format since the late 1880s.[citation needed] Blue Amberols can play for as long as 4 minutes and 45 seconds[citation needed] and have a surface layer of the "indestructible" plastic celluloid, which Edison tinted a trademark blue color. Edison brand phonographs designed to play Amberol cylinders were named Amberolas. Displayed at History HouseEdison Sterling Record. Blue Amberol cylinder record.Front: Thomas A Edison PAT'D. 6. 2043. The Pullman Porters on Parade. Meeker (engraved, edge)music, amberol, blue amberol, thomas a edison, edward meeker -
Bendigo Historical Society Inc.
Document - MALONE COLLECTION: V - GREETING CARDS
Document. Greeting Cards. White card with yellow patterned border. Atteched to the front with 5 bifurcated pins is a white patterned horseshoe (part on the right is broken off). In the centre of the horseshoe is an oval picture of some small blue & white flowers. There are also 4 black & pale green buds? At the bottom, attatched with another pin is another piece of celluloid printed with: Many Happy Returns of the Day. Attatched to the back is a piece of card to stand the card like a picture frame.person, greeting cards, malone collection, malone collection, greeting cards -
Bendigo Historical Society Inc.
Document - MALONE COLLECTION: GREETING CARDS
Document. Greeting Cards. White card with shaped, embossed edges with some cutouts. On the front is a shaped embossed piece of celluloid held on with a bifurcated pin in each corner. It has a large green leaf near the top with some smaller green leaves and pink flowers. Dinna Forget is embossed on an angle across the centre and has had glitter on it. At the bottom is more pink flowers and a bunch of blue flowers. It has a light olive coloured ribbon tied in a bow on the left.person, greeting cards, malone collection, malone collection, greeting cards -
Ballarat Tramway Museum
Functional object - Fare Token/s, Melbourne and Metropolitan Tramways Board (MMTB), 1920s
Demonstrates aspects of the Melbourne Tramways fare system as a comparison to their use at Ballarat.Fare tokens - 1 1/2d - 22mm diameter - dark brown celluloid - with words "Melbourne & Metropolitan" on circumference and "Tramways Board" in centre of token. On reverse in large font "1 1/2" and a small font "D" at to the right - indicating token had a value of one and a half pence. Both sides have a edge lining border about 1mm from the outer edge. See image. Details of use, date of manufacture and manufacturer not known at time of cataloguing. trams, tramways, tickets, tokens, mmtb, melbourne -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Thomas pessary associated with Dr Frank Forster
This pessary was manufactured by Allen and Hanburys in three sizes - large, medium, and small. The pessary was originally regarded as an instrument and made from cork, ivory, hard rubber or gum-elastic. In later times, they were made from black vulcanite, flexible tin, soft copper wire covered with Indian rubber, and celluloid. The form of the pessary was and still is variable -either round, oval, or moulded in some cases combining three or four curves depending on the size of the pessary. In ancient times, medicated pessaries were made from emollient. astringent and aperient. Several of these are still used, but in more modem times are called vaginal suppositories. Anal suppositories are still used to suppress the pain of haemorrhoids.Thomas style supportive antiflexion pessary. Pessary is made of black vulcanite and is inscribed with number "60". Pessary is thickened at distal end and tapered at proximal end.intrauterine device, pessary -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Thomas pessary associated with Dr Frank Forster
This pessary was manufactured by Allen and Hanburys in three sizes - large, medium, and small. The pessary was originally regarded as an instrument and made from cork, ivory, hard rubber or gum-elastic. In later times, they were made from black vulcanite, flexible tin, soft copper wire covered with Indian rubber, and celluloid. The form of the pessary was and still is variable -either round, oval, or moulded in some cases combining three or four curves depending on the size of the pessary. In ancient times, medicated pessaries were made from emollient. astringent and aperient. Several of these are still used, but in more modem times are called vaginal suppositories. Anal suppositories are still used to suppress the pain of haemorrhoids.Thomas style supportive antiflexion pessary. Pessary is made of black vulcanite and is inscribed with number "65". Pessary is thickened at distal end and tapered at proximal end.intrauterine device, pessary -
Stratford and District Historical Society
Kewpie Doll, Doll, 1950s onwards
Popular from early twentieth century. Based on comic strip illustration by Rose O'Neill that appeared in Ladies Home Journal in 1909. First produced in Ohrdruf, Germany. Made out of bisque, then celluloid , hard plastic versions from 1949. Name derived from "cupid" the Roman god of beauty. The time capsule at 1939 New York World' Fair contained a Kewpie doll. The term "Kewpie doll" is sometimes mistakenly applied to the troll doll. This particular style of doll was awarded as a carnival prize and often collected. Many other articles were made using their images[ Wikipedia, 2012]. Added to the collection as part of a Toys and Games exhibition. Many visitors commented on having owned one when they were growing upA flesh coloured plastic jointed kewpie doll. It has rigid painted eyes, webbed fingers, head,arms and legs jointed to body so can move them, "cowlick" hair on top of head, above ears and nape of neck, back spine and bottom clearly moulded, smiling painted lips -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Ring pessary associated with Dr Geoff Bishop, c. 1977, Portex Ltd, England, c1977
This pessary came from Professor Geoff Bishop's rooms, Mollison House, 386 Albert Street, East Melbourne. As well as the UK, Portex had divisions in the USA and Canada. The pessary was originally regarded as an instrument and made from cork, ivory, hard rubber or gum-elastic. In later times, they were made from black vulcanite, flexible tin, soft copper wire covered with Indian rubber, and celluloid. The form of the pessary was and still is variable -either round, oval, or moulded in some cases combining three or four curves depending on the size of the pessary. In ancient times, medicated pessaries were made from emollient. astringent and aperient. Several of these are still used, but in more modem times are called vaginal suppositories. Anal suppositories are still used to suppress the pain of haemorrhoids. Portex brand ring pessary in original packaging. Consists of circular ring of cream vinyl, in sterile sealed pouch with transparent plastic at back. Stamped on pouch "PORTEX ENGLAND", and the text "USE BY FEB 77" and "CONTROL No F/1 505". The ring is size 700/300/056 - 56mm. A sticker on the back of pouch gives instruction for cleaning the pessary.pessary, intrauterine device -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Ring pessary associated with Dr Geoff Bishop, c. 1977, Portex Ltd, England, before 1977
This pessary came from Professor Geoff Bishop's rooms, Mollison House, 386 Albert Street, East Melbourne. As well as the UK, Portex had divisions in the USA and Canada. The pessary was originally regarded as an instrument and made from cork, ivory, hard rubber or gum-elastic. In later times, they were made from black vulcanite, flexible tin, soft copper wire covered with Indian rubber, and celluloid. The form of the pessary was and still is variable -either round, oval, or moulded in some cases combining three or four curves depending on the size of the pessary. In ancient time, medicated pessaries were made from emollient. astringent and aperient. Several of these are still used, but in more modem times are called vaginal suppositories. Anal suppositories are still used to suppress the pain of haemorrhoids.Portex brand ring pessary in original packaging. Consists of circular ring of cream vinyl, in sterile sealed pouch with transparent plastic at back. Stamped on pouch "PORTEX/MADE IN ENGLAND", and the text "USE BY JAN 77" and "CONTROL No 06 88". The ring is size 700/300/065 - 65mm. A sticker on the back of pouch gives instruction for cleaning the pessary. A red dot is also stuck to the back of the pouch.pessary, intrauterine device -
Clayton RSL Sub Branch
Button, I will help until the war is won
The use of these buttons as a means of raising revenue through patriotic sentiment occurred soon after Australia pledged allegiance to Empire. Buttons reflected ‘public sentiment, courage, patriotism, generosity and several [un- named] virtues’ such as the martyred mother of a ‘fallen’ hero. Attention was paid to attractiveness of design, encoded symbolism and high quality of production. Expressing ‘loyalty’, they were tokens to be kept for perpetuity. Female labour was used to operate the die that compressed the tin backing, photographic print and celluloid cover together. The pin was applied by hand. Women, of all ages, entered into the spirit of voluntary sales. Often they were sold at the entry and exit points of major pedestrian thoroughfares. . Pride in salesmanship was affected by publishing the name of the woman and her fiscal achievement in the major newspapers of the day.Small circular pressed tinplate button featuring a white map of Australia on a dark blue ground with the stars of the Southern Cross surrounding, all within a gold border. The phrase ‘I Will Help Until the War is Won’ is printed in red across the mapI will Help until the war is won -
Waverley RSL Sub Branch
Print NCO QUAL (RAAMC), Name: 11’63 ARA(RAAMC) Junior NCO QUAL 23APR – 31 MAY
Name: 11’63 ARA(RAAMC) Junior NCO QUAL 23APR – 31 MAY Healseville VictoriaDescription: Black and white photograph gloss print mounted in celluloid sheet and stapled through the photograph. Damage to photo from tape having been stuck on photo at some stage and then removed damaging he surface of the photo in all four corners. There is also past damage to various parts of the photo from droplets of water or some other fluid. Size: 25cm x 19.8cm Print has been re-photographed and digitally repaired for display (19th September 2012 by: John Dix) Saved as Restored.bmp at highest practical resolution Name: 11’63 ARA(RAAMC) Junior NCO QUAL 23APR – 31 MAY -
Bendigo Historical Society Inc.
Document - MALONE COLLECTION: GREETING CARDS
Document. Greeting Cards. Cream card with gold border 15mm from the edge. At the top corners are gold bells with red interiors and ribbond. Inside the border is a picture of a snow covered scene with houses, church? and trees. A large red moon is rising behind the trees. Some people are walking along the path to the larger building. On the right of the path is a felled tree with a red robin sitting on it. At the bottom printed in gold is: Hearty Christmas Greetings. The celluloid front is sewn to the card backing. A bright yellow cord is double threaded through the front left.person, greeting cards, malone collection, malone collection, greeting cards -
Ballarat Tramway Museum
Functional object - Fare Token/s, Electric Supply Co. of Vic (ESCo), 1913
Demonstrates aspects of the Ballarat Tramways fare system at the time of the one man trams, tokens which could be pre purchased by travellers and save time when boarding trams. See notes on file re these eg Reg Item 1801. Fare tokens - 1 1/2d - 21mm diameter - light brown celluloid - with "B.E.T." in large capitals on front centre of token and words "Ballarat Electric Tramways 1913" on circumference. On reverse in large font "1 1/2" and a small font "D" at top of the right - indicating token had a value of one and a half pence. For details of use see Reg. Item 1794 and Reg. item 1801.1, 1802. For 2d tokens, see Reg. Item 1943.1 See Reg. Item 2514 for H.P. James notes on the token system. trams, tramways, tickets, tokens, esco, one man trams -
Port Fairy Historical Society Museum and Archives
Functional object - Headlamp Masks, 1940's
Used during WWII to dim headlights making them, hopefully, invisible from the air. These were used by Mr Claude Freckleton who lived on a farm outside of Port Fairy Pair headlamp masks, with shaded glass slit - Painted blackHow to fit "G J C" approved headlamp mask Remove glass from car headlamp & mark mask to the size and shape of glass centering the glass slit and celluloid insert. Cut mask with tin snips to fit the headlamp instead of glass with this side inward towards the globe. Adjust the headlamp downward 2 degrees from the perpendicular so that the light beam strikes the road 10 feet from the front of the car. * Important - Do not alter the angle of slits over slits.world war two, headlights, car, headlight covers -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Hodges-style pessary associated with Dr Frank Forster, medium
This type of pessary was often used for uterine malpositions and displacements and usually made from vulcanite. This particular object is known as Hodges moulded pessary. [Source: George Tiemann & Co Surgical Instruments catalogue.1989. page 486.] The pessary was originally regarded as an instrument and made from cork, ivory, hard rubber or gum-elastic. In later times, they were made from black vulcanite, flexible tin, soft copper wire covered with Indian rubber, and celluloid. The form of the pessary was and still is variable -either round, oval, or moulded in some cases combining three or four curves depending on the size of the pessary. In ancient times, medicated pessaries were made from emollient. astringent and aperient. Several of these are still used, but in more modem times are called vaginal suppositories. Anal suppositories are still used to suppress the pain of haemorrhoids. Moulded black vulcanite pessary. Pessary is irregular in shape, and medium size. "I.T.A.Y." inscribed on upper curve.pessary, intrauterine device -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Hodges-style pessary associated with Dr Frank Forster, large
This type of pessary was often used for uterine malpositions and displacements and usually made from vulcanite. This particular object is known as Hodges moulded pessary. [Source: George Tiemann & Co Surgical Instruments catalogue.1989. page 486.] The pessary was originally regarded as an instrument and made from cork, ivory, hard rubber or gum-elastic. In later times, they were made from black vulcanite, flexible tin, soft copper wire covered with Indian rubber, and celluloid. The form of the pessary was and still is variable -either round, oval, or moulded in some cases combining three or four curves depending on the size of the pessary. In ancient times, medicated pessaries were made from emollient. astringent and aperient. Several of these are still used, but in more modem times are called vaginal suppositories. Anal suppositories are still used to suppress the pain of haemorrhoids.Moulded black vulcanite pessary. Pessary is irregular in shape, and large size.pessary, intrauterine device -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Hodges-style pessary associated with Dr Frank Forster
This type of pessary was often used for uterine malpositions and displacements and usually made from vulcanite. This particular object is known as Hodges moulded pessary. [Source: George Tiemann & Co Surgical Instruments catalogue.1989. page 486.] The pessary was originally regarded as an instrument and made from cork, ivory, hard rubber or gum-elastic. In later times, they were made from black vulcanite, flexible tin, soft copper wire covered with Indian rubber, and celluloid. The form of the pessary was and still is variable -either round, oval, or moulded in some cases combining three or four curves depending on the size of the pessary. In ancient times, medicated pessaries were made from emollient. astringent and aperient. Several of these are still used, but in more modem times are called vaginal suppositories. Anal suppositories are still used to suppress the pain of haemorrhoids.Moulded black vulcanite pessary. Pessary is irregular in shape.intrauterine device -
Geoffrey Kaye Museum of Anaesthetic History
Equipment - Inhaler, Hewitt, George Barth & Co. Ltd, c. 1895
Sir Frederic W. Hewitt (1857-1916), an accomplished and well respected English anesthesiologist, was an expert in the function and use of the Clover Ether Inhaler. In 1901, Hewitt described his modification of the Clover Inhaler. Often referred to as the Hewitt Wide-Bore Inhaler, Dr. Hewitt introduced changes in order to make it easier to breathe through the device and improve the ventilation of oxygen and carbon dioxide. In 1901, Hewitt was recruited to anesthetize King Edward VII for emergency abdominal surgery. This was just a day or so before the new King was to be coronated. He recovered well, and Hewitt became the first anesthesiologist ever to be knighted. (Source: Wood Library Museum)Tall black round topped box with brass hooks at the sides and brass hinges at rear. There is a brown fabric handle on the top. The box has red padding inside the lid and red lining inside the base and sides. There is a round section in the base of the box for holding the round clear glass bottle for ether. There is also a ellipse-shaped metal inhaler on small metal base with a thin metal handle and pipe with bakelite plug attached via a small metal chain. A brown mask is made of brown leather and celluloid which is connected to the inhaler. There is a metal ether measure for pouring the ether.On notecard in box: (B) HEWITT'S INHALER 1895, MADE BY GEO. BARTH & CO LTD., ADVERTISED AS THE SOLE MAKERS OF THE INHALER AND RECOGNISED BY HEWITT IN HIS TEXT BOOK - ANAESTHETICS AND THEIR ADMINISTRATION - AS THE MAKER OF HIS INHALER. / GIVEN BY DR. E.S. HOLLOWAY IN 1951, WHO ACQUIRED MUCH OF HOWARD JONES' EQUIPMENT AFTER THE LATTER'S DEATH. Stamped on underside of glass bottle in a circle: WUBW [illegible] Blue sticker on inhaler: O.2.13. Printed on inhaler under handle: Geo Barth [illegible] / SOL [illegible] Printed on body of inhaler: Full Printed on body of inhaler: 1/2 Printed on inside of leather mask: F35hewitt, sir frederic, jones, howard, inhaler, geo. barth & co. ltd., ether -
Clayton RSL Sub Branch
Button, French Red Cross
The use of these buttons as a means of raising revenue through patriotic sentiment occurred soon after Australia pledged allegiance to Empire. Buttons reflected ‘public sentiment, courage, patriotism, generosity and several [un- named] virtues’ such as the martyred mother of a ‘fallen’ hero. Attention was paid to attractiveness of design, encoded symbolism and high quality of production. Expressing ‘loyalty’, they were tokens to be kept for perpetuity. Female labour was used to operate the die that compressed the tin backing, photographic print and celluloid cover together. The pin was applied by hand. Women, of all ages, entered into the spirit of voluntary sales. Often they were sold at the entry and exit points of major pedestrian thoroughfares. The women of Kew set up a kiosk in front of the Post Office and the Railway Station to solicit their round, oval and square shaped wares. Pride in salesmanship was affected by publishing the name of the woman and her fiscal achievement in the major newspapers of the dayWorld War I-era pressed tin fundraising button. The button features the French flag and a red cross over a starburst, against a gold background. Encircling the image is a white ring with the text ‘French Red Cross’ in blueFrench Red Cross -
Ballarat Tramway Museum
Functional object - Fare Token/s, Electric Supply Co. of Vic (ESCo), 1913
Demonstrates aspects of the Ballarat Tramways fare system at the time of the one man trams, tokens which could be pre purchased by travellers and save time when boarding trams. See notes on file re these eg Reg Item 1801. Fare tokens - 2d - 21mm diameter - green celluloid - with "B.E.T." in large capitals on front centre of token and words "Ballarat Electric Tramways 1913" on circumference. On reverse in large font "2" and a small font "D" at top of the right - indicating token had a value of two pence. For details of use see Reg. Item 1794 and Reg. item 1801.1, 1802. For 2d tokens, see Reg. Item 1943.1 See Reg. Item 2514 for H.P. James notes on the token system and See Reg. Item 1794 Another copy from donation of Jan Truscott added 2-12-2018. trams, tramways, tickets, tokens, esco, one man trams -
Churchill Island Heritage Farm
Clothing - Lace Collar, Detachable
This detachable lace collar has been machine made and there was a note included with the piece to say “Dickie”. Perhaps calling it a lace collar is a misnomer. If it is indeed a dickey that would be a false front (e.g. the celluloid false tuxedo front for men) then the fabric would be at the bosom with the straight edge of the collar draped over it and perhaps the long pieces embellishing the sleeves. Dickeys made the transition to women’s wear in 1943 although they may have been worn by women before this time. The February issue of Vogue New York stated that one would “enliven your new suit or rejuvenate your old”. Women’s dickeys were made from cotton or rayon and embellished with embroidery, lace or ruffles. The lace itself is quite beautiful but the construction of the piece is quite confusing. Due to its ostensibly irregular and non-conformist shape, the members of the Lace Guild who examined this piece opined that it was made for a specific garment. This may have been an elegant jacket or blouse.The Amess family owned Churchill Island from 1872 to 1929. This lace collection was owned and contributed to by four generations of Amess women, see above.Detachable lace collar, with plain netting overlaid with multiple stripes with small floral motifs repeating at regular intervals. Packaged with note "Dickie"lace, churchill island, janet amess lace collection, detachable, collar, machine, amess -
Kew Historical Society Inc
Badge, Come Back to God, 1915-1920
Most of the civic and sporting ephemera assembled by Francis Rigg were patriotic buttons. The use of these buttons as a means of raising revenue through patriotic sentiment occurred soon after Australia pledged allegiance to Empire. Buttons reflected ‘public sentiment, courage, patriotism, generosity and several [un- named] virtues’ such as the martyred mother of a ‘fallen’ hero. Attention was paid to attractiveness of design, encoded symbolism and high quality of production. Expressing ‘loyalty’, they were tokens to be kept for perpetuity. Female labour was used to operate the die that compressed the tin backing, photographic print and celluloid cover together. The pin was applied by hand. Women, of all ages, entered into the spirit of voluntary sales. Often they were sold at the entry and exit points of major pedestrian thoroughfares. The women of Kew set up a kiosk in front of the Post Office and the Railway Station to solicit their round, oval and square shaped wares. Pride in salesmanship was affected by publishing the name of the woman and her fiscal achievement in the major newspapers of the day. The badges form part of a collection of ephemera originally purchased by Francis Horace Rigg (19/10/1882-05/03/1946) of 50 Belford Road, Kew (Vic.). Frances Rigg was a local business identity in Kew, ultimately managing the local branch of the English, Scottish and Australian (ES&A) Bank at 175 High Street, Kew from c. 1920 until the 1940s. After Francis Rigg’s death, the collection of buttons and badges was inherited by his son, Ken Rigg (14/11/1922-19/01/2014). The collection was subsequently donated to the Kew Historical Society in 2015 by his grandson Adrian Rigg during the Gallipoli and Beyond Commemoration.The collection covers a period of almost 40 years. The majority of the badges are patriotic buttons, issued and sold during and immediately after World War 1 to raise funds for national and overseas causes. The collection also includes a number of locally significant sporting event buttons and sporting club medallions, issued in the 1920s and 1930s.The use of common symbols for a range of purposes is sometimes a feature of wartime and post-war fundraising buttons. Like the ‘Hospital Day 1919’ badge, the ‘Come Back to God’ badge is within a seven pointed star on a dark blue ground with sprays of wattle; attempting to harness nationalism with religion.Come back to Godbutton -
Kew Historical Society Inc
Badge - Fundraising Button, Hospital Day, 1914-1918
Most of the civic and sporting ephemera assembled by Francis Rigg were patriotic buttons. The use of these buttons as a means of raising revenue through patriotic sentiment occurred soon after Australia pledged allegiance to Empire. Buttons reflected ‘public sentiment, courage, patriotism, generosity and several [un- named] virtues’ such as the martyred mother of a ‘fallen’ hero. Attention was paid to attractiveness of design, encoded symbolism and high quality of production. Expressing ‘loyalty’, they were tokens to be kept for perpetuity. Female labour was used to operate the die that compressed the tin backing, photographic print and celluloid cover together. The pin was applied by hand. Women, of all ages, entered into the spirit of voluntary sales. Often they were sold at the entry and exit points of major pedestrian thoroughfares. The women of Kew set up a kiosk in front of the Post Office and the Railway Station to solicit their round, oval and square shaped wares. Pride in salesmanship was affected by publishing the name of the woman and her fiscal achievement in the major newspapers of the day. The button forms part of a collection of ephemera originally purchased by Francis Horace Rigg (19/10/1882-05/03/1946) of 50 Belford Road, Kew (Vic.). Frances Rigg was a local business identity in Kew, ultimately managing the local branch of the English, Scottish and Australian (ES&A) Bank at 175 High Street, Kew from c. 1920 until the 1940s. After Francis Rigg’s death, the collection of buttons and badges was inherited by his son, Ken Rigg (14/11/1922-19/01/2014). The collection was subsequently donated to the Kew Historical Society in 2015 by his grandson Adrian Rigg during the Gallipoli and Beyond Commemoration. The collection covers a period of almost 40 years. The majority of the badges are patriotic buttons, issued and sold during and immediately after World War 1 to raise funds for national and overseas causes. The collection also includes a number of locally significant sporting event buttons and sporting club medallions, issued in the 1920s and 1930s.Round metal button in red, white, blue and gold showing a sun setting over the sea with words printed in red around border and on lower outer rim.hospital day, patriotic buttons, first world war (1914-18) -
Ballarat Tramway Museum
Functional object - Fare Token/s, Electric Supply Co. of Vic (ESCo), 1913
Demonstrates aspects of the Ballarat Tramways fare system at the time of the one man trams, tokens which could be pre purchased by travellers and save time when boarding trams. See notes on file re these eg Reg Item 1801.Two Fare tokens - 2d - 21mm diameter - green celluloid - with "B.E.T." in large capitals on front centre of token and words "Ballarat Electric Tramways 1913" on circumference. On reverse in large font "2" and a small font "D" at top of the two - indicating token had a value of two pence. For details of use see Reg. Item 1794 and Reg. item 1801.1, 1802. For 1 1/2D tokens, see Reg. Item 1944.1 For other 2d token see Reg. Item 1794 and 2488 page 31. See Reg. Item 2514 for H.P. James notes on the token system and See Reg. Item 1794 trams, tramways, tickets, tokens, esco, one man trams -
Melbourne Tram Museum
Coin - Fare Token/s, Melbourne & Metropolitan Tramways Board (MMTB), 1920's
Set of two fare tokens - 1 1/2d - 22mm diameter - dark brown celluloid - with words "Melbourne & Metropolitan" on circumference and "Tramways Board" in centre of token. On reverse in large font "1 1/2" and a small font "D" at to the right - indicating token had a value of one and a half pence. Both sides have a edge lining border about 1mm from the outer edge. Record updated following a query and being advised of an article in The Argus 1-4-1924 - see Reg Item 3359 for a copy. Item probably dates from c1920, phased out 1924. News item says made from "Paper Mache". See also Reg Item 1635 and 4666 for another example.trams, tramways, tickets, tokens, mmtb, melbourne -
Melbourne Tram Museum
coin - Fare Token/s, Melbourne & Metropolitan Tramways Board (MMTB), 1920's
Fare tokens - 1 1/2d - 22mm diameter - dark brown celluloid - with words "Melbourne & Metropolitan" on circumference and "Tramways Board" in centre of token. On reverse in large font "1 1/2" and a small font "D" at to the right - indicating token had a value of one and a half pence. Both sides have a edge lining border about 1mm from the outer edge. Record updated following a query and being advised of an article in The Argus 1-4-1924 - see Reg Item 3359 for a copy. Item probably dates from c1920, phased out 1924. News item says made from "Paper Mache". See also Reg Item 1635 and 1660 for another example.trams, tramways, tickets, tokens, mmtb, melbourne -
Ballarat Tramway Museum
Functional object - Fare Token/s, Electric Supply Co. of Vic (ESCo), 1913
Two Fare tokens - 1 1/2d - 21mm diameter - light brown celluloid - with "B.E.T." in large capitals on front centre of token and words "Ballarat Electric Tramways 1913" on circumference. On reverse in large font "1 1/2" and a small font "D" at top of the right - indicating token had a value of one and a half pence. For details of use see Reg. Item 1794 and Reg. item 1801.1, 1802. For 2d tokens, see Reg. Item 1943.1 See Reg. Item 2514 for H.P. James notes on the token system an d See Reg. Item 1794 3rd token added 11/8/2006 - 1944.3 4th token added 1/9/2016 - 1944.4 from donation of Julianne Giles. trams, tramways, tickets, tokens, esco, one man trams -
Moorabbin Air Museum
Equipment (item) - Graviscope for Lincoln (Australian) RAAF Ident No G6C/3972, Graviscope for Lincoln
Description White plastic doubled sided Graviscope stored in protective leather carry case. Case is fitted with pair of press studs, pocket in front for holding instructions and is stamped "Graviscope / for / Lincoln / (Australian) / Manufactured by / Melb > W & G < Aust / R.A.A.F / Ident. No G6C/3972". Plastic graviscope consists of a 277mm white disc, printed on both sides, overlaid on one side by a 224mm disc and the other side by a 175mm disc. All discs located by central screw, to which is attached a 160mm long x 25mm wide clear celluloid strip. History / Summary The graviscope is a computing device, which in aircraft was used for measuring the centre of gravity in an aircraft. This would vary depending on crew, bomb load, fuel and stores carried. It was used in the British designed but Australian manufactured, Government Aircraft Factory (GAF) Lincoln heavy bomber, which was operated by the Royal Australian Air Force (RAAF) in the years following the Second World War. This aircraft was originally a derivative of the famous Avro Lancaster bomber. The Lincoln was used by both the RAAF and the Royal Air Force in operations against Malayan Communist terrorists during the Malayan Emergency, 1948-1960. This graviscope is of the type designed for and used by RAAF and RAF aircrew who operated this aircraft.Many by W and G Australia