This is the tiller from the SS Stormbird which traded for the Orbost Shipping Company (1906-1915) between Marlo and Lakes Entrance. Mr Peter Nixon (Min. for Transport and for the Navy, 1970s) and Mr Arthur McMullen had the wheel and mast which had been recovered from the wreck of the SS Stormbird in New Guinea. Mr Nixon donated this wheel to the Orbost Historical Society in 1969.The S S Stormbird was an auxiliary-ketch which was owned by the Orbost Shipping Company (Henry James was the principal shareholder and manager of this company). It, along with the Coringle and the Wongrabelle were the main steamers owned by this company. These boats also carried sails. The significance of this item lies with its association with the shipping trade which serviced this region prior to the railway coming in 1915/16.A ship's tiller wheel, made of wood and faced with brass. The wood is painted black. It has eight spokes and handles to grip in order to steer a boat/ship. Two of the grips have strong rope or wire rope wrapped around them.ss stormbird orbost-shipping-company ship-fitting

Negative of a cable grip car being hauled by a tractor (in or out) of the South Melbourne tram depot or car sheds. Has the grip in the removed position. In the background is a hotel and a petrol or service station - out of focus. The grip car has the destination of Collins St on the front and "Connects with Collins St electric cars" on the side. Photographer could be Wal Larsen based on negative size - see Reg Item 5064.Written on rear of album print "Tractor hauling cable dummy out of South Melb. Sheds."trams, tramways, cable trams, south melbourne depot, grip tram

Used to grip wet washing from hot water tub or copper.Two wooden pieces joined with screws by a flat flexible metal piece.Each wooden piece is indented at ends.Tongs for handling hot washing.Made from light pine wood and metal.Nonewashing, laundry, clothes, tongs

Branding irons are used to print a burn an identifying marker on the hide of horses or cattle so that they may be later identified if they become lost or escape from their pasture. The irons were typically forged by blacksmiths using a toolset that included hammers, anvils and chisels. The branding irons were used by heating the end bearing the owner’s initials to a very high temperature in a furnace, and then burnishing it against the skin of the cow. Brands were registered with state governments as unique marks. This allowed for a state registry to be maintained. This item was used in Orbost in the livestock industry.This item is an example of an implement once used in the livestock industry in Orbost.A branding iron with the letter W on the end. It has a long iron handle with a ring grip at the top.branding-iron rural-industry

Parrying shields have long been used within Aboriginal communities not only for protection, but as a symbolic implement used in rituals. Aboriginal men using very basic tools made them. They were designed to be mainly used in battle but were also used in ceremonies. Many shields have traditional designs or fluting on them whilst others are just smooth. The necessary tools and equipment for hunting, fishing and warfare were one of the very few items that Aboriginals carried with them from place to place. Most were used for a multiplicity of purposes. Because many were made from raw natural materials, such as wood, generally only partial remains are found today. This is a good example of a wooden Indigenous artefact from Eastern Australia.An Aboriginal shield of roughly carved wood. Has a square shaped hollowed out hand grip.

The Orbost Rifle Club existed in the early 20th century. (There are records from 1900). It folded in the late 1970's.Target shooting is one of the oldest organised sports in Australia. Records date back to the British Marines at Sydney Cove in 1788. The Victorian Rifle Association (VRA) was formed in 1860. One of the most important adjuncts to the militia system from 1903 to the re-organisation of 1912 was the role played by the Rifle Club movement in Australia. At the time, these clubs were seen as the reservoir of manpower for a potential guerrilla force should any invasion occur. For Australia, the invasion fear was uppermost in the minds of the population. So important were the rifle clubs for the defence of Australia that the Commonwealth provided the training staff, rifles and ammunition so the clubs could function. Members were drilled, wore uniforms and practised all the basic skills of soldiering as well as target shooting. The Orbost Rifle Club was active during this period.A small blue folder with a metal grip. It contains assorted documents concerning the Orbost Rifle Club.orbost-rifel-club documents

These multi function pliers were imported and used in Moorabbin Shire Many tools were imported by early settlers and also among the early settlers in Moorabbin Shire were blacksmiths who made tools for the other settlers who were establishing the homes, market gardens, farms, orchards and various businesses. Early settlers were self reliant and repaired their own equipment for kitchen,dairy, farm, horses, carts using various tools . This pair of multi purpose pliers is typical of the type used by early settlers in Moorabbin Shire c1900 Steel adjustable locking pliers c1900 with lion head vise, and spring loaded multi grip FOREIGNadjustable pliers, early settlers, market gardeners, blacksmiths, tools, building equipment, hammers, moorabbin shire, bentleigh, mckinnon, highett, cheltenham,mcewan james pty ltd, melbourne, bunnings pty ltd,

1 chrome metal barrel with adjustable parts; black grip and trigger; 1 Instruction manual."ASHTON AUTOMATIC INJECTOR / MANUFACTURER" "ASHTON & CO. LTD." "ADELAIDE, S.A." "PAT. APPN. 37054 / 58" "APP. RD. 39141"

White enamelled candle holder with elongated finger grip, square shaped with inward curved sides.lighting, candle, candleholders, k46

This side saddle is an example of early to mid-20th-century horse riding equipment worn with specific female riding habits. Similar designs are used today at certain equestrian events.Ladies Side-Saddle, black leather with one stirrup and two horns to grip. A pouchis attached.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, saddle, side saddle, horse riding, transportation, sport, ladies saddle, ladies side saddle, riding equipment

An Head 'Ultimate Competition' composite tennis racquet (1), featuring: split shaft; and, leather handle grip. Original leather handle grip is concealed by a later, synthetic, Prince 'Duratred' grip. Racquet is accompanied by a Head '660' racquet cover (2) - originally used for a '660' series racquet model. Materials: Composite Materials, Nylon, Leather, Plastic, Adhesive tape, Ink, Synthetic material, Vinyl, Ink, Metaltennis

This greenstone axe has a hand grip chipped on one end and a smooth arc shaped cutting edge.

Most likely collected and donated by Dr Frank Forster. Labelled Standard blunt hook and crochet- viewed by Bryan Hibbard.Blunt hook and crochet, with central hand grip of mahogany wood inlaid on either side. Unknown manufacturer.obstetric delivery, blunt hook, destructive instrument

Cane handle, plaited leather grip with plaited knob. Braided leather whip attached to the handle by twine.

Trickey Collection, Ladies Gold Glove Grip Ornate Design with small Chain. Usually attached to a handbag stawell

This aluminium kettle was manufactured between 1940 to 1960's and replaced the heavier caste iron "open fire" stove ones (in doors or in the bush). A cast iron flat base between the open fires and the kettle was required. This kettle was used extensively with indoor open fire places. It was part of the evolution in "tea" making kettles. These were the only method of making hot beverages before introduction of electric kettles. For the Kiewa Valley the connection to the major electricity grid was post 1950's.This kettle is significant demonstrating the type of kitchen utensils required before electrical home connections became a reality. The aluminium structure of the kettle was an advancement over the heavier caste iron kettles. This type of kettle is still in use for bush and mountain hikers/climbers due to the light weight. This kettle was used by the Tawonga C.W.A. Branch. The C.W.A. motto "Honour our God, Loyalty to the throne, Service to the country, Through country women, For country women, By country women."This 99% aluminium hot plate kettle with lid (bakelite handle) is Australian made for flat stoves (cooking or room heating). It has a "tea style" spout and a bakelite hand grip(knob) on the top of the lid. The lid has nine ridges (for strength) radiating from the central hand grip. The two handle prongs are bop riveted onto the the body of the kettle. The bakelite hand grip has been fashioned to fit the natural contours of a clutching hand.On both sides of the aluminium handle "HOT PLATE WARE" and covering an oblique shaped triangle "99% PURE ALUMINIUM" and below that "MADE IN AUSTRALIA".Within the triangle "DURALIFE"cwa, homeware aluminium kitchen utensils, made in australia cook ware

The Jew's Harp was gripped between the teeth and strummed with the thumb. The tone changed according to the pressure applied by the teeth.A rusty metal "jew's harp" with a thin wire prong through the centre.jew's-harp musical-instrument

Colour postcard of MTCo Cable trailer or saloon tram at Scienceworks Spotswood. Has the grip car in front of it.Yields information about Cable tram set No. 1Full colour postcard, divided back Nu-color-vue - Classic collection - 140815 NCV 8720tramways, trams, scienceworks, cable trams, tram 1

Scythes were used with a long sweeping movement which made them much less tiring for labourers to use than reaping hooks or sickles though they still involved great physical labour and considerable skill to perfect. Both hands were in use and the operator did not have to bend his back to reach down to the crop. Scythes were not used as often on farms after the mechanisation of harvesting. They were still used for cutting awkward shaped small plots and for opening a path for the tractors. This item is an example of a tool used by the early settlers of the Orbost district. A curved wooden scythe handle with two nailed grips attached with metal rings. There is no blade. There is a metal hook at the bottom.scythe agricultural tool farming

Type used on the RAAF Base by air crew and control tower operators. Electric signalling lamp in grey metal casing, and hand grip with trigger at rear. Mount on top for sighting attachmentRAAF Ref No SA/760 Lantern portable signalling. Admiralty Pattern No 5110D. Serial No. 3901 Year 1942 Amalgamated Wireless A/SIA LTD signal lamp, lantern, communication, signals

Part of Graham Collection, donated by the Family of Misses Mary and Edith Maude Graham, of 4 Blair Street, Portland.Orange/tan feather quill. Also has rubber finger grip on stem. Measures 19.5 cm long.

This hand held greenstone axe has been roughened for grip at one end and sharpened to a smooth square edge.

Possibly collected by Dr Frank ForsterForceps, Aveling's. Metal insert on hand grips, bronze coloured. Stamped "Mayer & Meltzer London" on inner armforceps, obstetric

A Sentra 'Grip III' racquet. Curved shape handgrip. Materials: Graphite, Plastic, Adhesive tape, Nylon, Leathertennis

Used by horse riders to control their horses. Also by cart driver on single horse unitsManufactured and sold by Holden and Frost Circa 1900Taped shaft with leather flap25 x120mm on smaller end. Other end a leather hand grip 180mm longfequine, crop

An unmarked SIRT tennis racquet, with the inscription MADE IN ITALY along the left side of shaft, and an 'S' trademark on the butt cover. Inscription on handle grip: THE "ORIGINAL"/KINGHORN TACKY GRIP. Materials: Wood, Nylon, Leather, Ink, Glue, Lacquer, Metal, Paint, Plastic, Adhesive tape, Ribbontennis

An unmarked SIRT tennis racquet, with the inscription MADE IN ITALY along the left side of shaft, and an 'M' trademark on the butt cover. Inscription on handle grip: THE "ORIGINAL"/KINGHORN TACKY GRIP. Materials: Wood, Nylon, Leather, Ink, Glue, Lacquer, Metal, Paint, Plastic, Adhesive tape, Ribbontennis

The photograph shows a number of grip cars (dummies with their grip mechanisms lifted) and trailers (Nos. 200 and 512) stored or parked in the open at North Fitzroy depot at about the time of closure of the cable tram system on 26 Oct. 1940. At least three double decker buses are in the background. . This Photo is included in the poster - The Passing of the Melbourne Cable tramways - See Reg Item 6367Yields information about cable trams or cars.Photograph - Black and White - cable cars parked at North Fitzroy depottramways, trams, cable trams, north fitzroy, mmtb, buses, mmtb buses, north fitzroy depot, td5c class, double deck buses