Coronet was first popular- class camera released in 1961 as distinct from the high and expensive class.Canon Canonet 35mm camera with light meter around and Cannon Lens SE,45mm,1.19. Made by Canon Camera co Inc. speed B(bulb) to one 500th for a second (11 settings), auto made and 'f' setting from 1.9 to 16. Self timer. Camera has a steel base with a satin chrome finish and a leatherette band around camera. Rewind lever and film forward lever on back.Camera has leather carry case in two pieces and strap. Provision for a flash to be fitted. Three items in the set.Canon Canonet, Canon Camera Co Inc made in Japanphotography, cameras

Kodak Retina 1a 35mm bellows camera with extending bellows, in a leather case (.02) and an Instruction book (in German .03). The camera has a chrome trim with leatherette over the rest of the steel forming the body of the camera. It has a Retina Xenar F 2.8/50mm, Schneider - Kreuznach 2668277 lens covering speeds from B (bulb) to 1/500th of a second and an aperture opening of f2.8 to f16. Provision for a hot flash and various film speeds. Film advance lever with indicator showing number of photos taken. An old cartridge (.04) is loaded in the camera. Four pieces make the set.Kodak Retina Camera|Retina 1a|Kodakphotography, cameras

Kodak Junior 1 Folding bellows camera and case - takes 620 film - with a Kodette 111 shutter. It is a simple with a B & I settings - no other adjustments.|View finder in cream bakelite - has film release button to release and a forward button to release the camera bellows. Back has red film number viewer on back.Kodak on upper lens|Kodette 111 shutter on lower lensphotography, cameras

An Agfamatic 2008 110film camera. Pocket automatic with Flip Flash, a fixed focus colour Agno - f9.2/26 mm lens. It uses two shutters (close up and landscape) with a flash and daylight setting. Fitted with a wrist chain and a leather carry case. It has a partly exposed film in it. It is metal with a brushed chrome finish and imitation leather on parts. The camera lens cover is part of the opening and closing of the camera.AGFAMATIC 2008 Sensor Pocketphotography, cameras

History prior to 1946 unknown. Camera etc was purchased by the donor in 1946 from Herbert Small Camera Supply then in Elizabeth Street Melbourne. Donor used camera regularly until recent years.'Etue' folding camera with accessories (camera, case, 3 negative containers in a imitation leather & cardboard container) and an additional slide tray. Camera can be used with glass plates, cut negative film and film packs. When camera is opened the lens, bellows etc slide into position. The whole lot slides on a rail system and can be locked in the position required. Item to be photographed can be viewed in a viewfinder which can be turned to a horizontal or vertical plane. In the viewfinder has a small bubble level. It includes an oblong chrome wire which is used to set the minimum distance from lens to object.|Camera is of steel covered and is covered with leather with a carrying handle. provision is made in the back to carry a film slide in a small envelope style pocket|Camera is made by Kamera Werkstatten of Dresden c1920.|It has a 'Zeiss Tessar' 1:4.5 lens of 10.5 cm focal length. Shutter is a 'Compur' with speeds of 1 to 1/250th of a second with Bulb and Time. It also has a delayed action feature. It also has a double extension for close up studies.|When folder it is a mere 4.5 cm from front to back, which cause it to be advertised as the slimmest camera made.|Camera case is made of brown tooled leather with a chrome clip and adjustable carrying handle - lid open upwards for the camera .Case is lined with a purple type of velvet material. 10 Items in total.photography, cameras, camera accessories

Purchased 27 Sept 1999 from Thomas Tyler and associates, Collins Street Melbourne. Prior owner unknown. Over 100 years old.Small hand held lorgnette with two lenses set in silver chased circular frames, the frames are hinged and swing out of a tortoiseshell case.personal effects, seeing aids

Purchased by Ted Arrowsmith in 1940 from chemist at 596 Station Street Box Hill, when he lived at 35 Cambridge Street Box Hill. Used by him until the 1960s. Carried throughout Australia and the South West Pacific War Zone in the R.A.A.F between 1942 and 1946.Black folding bellows camera.AGFA 127. Folds back into a narrow case with handle. Instruction book included.|Agfa - Bilinar lens - aperture f11to f22. Two view finders one Portrait and other Landscape. Fixed speed of 1/30th second plus time exposure.AGFA - Bilinar. Made in germany.photography, cameras

Carte de Visite. Portrait photograph, c. 2.25x3.5 ins.card mounted, with the photographer's name, etc. on the back. Cost cut by use of multiple lens. Collected (friends, celebrities, etc.) , for albums; not used as visiting cards. Mainly 1860s, but the fashion revived in the 1890s with a larger 'cabinet card'Hand tinted, with oil paint Carte de Viste of a middle aged woman. Held in a hinged leather bound case with a clip fastener. Photo surrounded by patterned gold leaf on left hand inner side. The right hand side covered with padded brown velvet. Daguerreotype.photography, photographs / slides / film

This camera went ashore at Gallipoli on the first day of the invasion 25/04/1915.Metal silver Vest Pocket Kodak Camera. Rectangular box type with scissor pop out lens. Bellows made of leather During WW1 it was marketed as a camera suitable for soldiers due to size and portability, often referred to as "The soldiers camera". It has small shutter release button mounted above the lens plate and below the lens there is a slider for choice of apertures, It originally used A127 autographic roll film. The case is small leather black rectangular shaped with flap and press stud to keep shut.On plate holding the lens-:VEST POCKET KODAK Patented Mar 4,1902,May 6,1913 On bronze piece surrounding the lens -: 25BT50 clear ...brilliant tripod gray 1/2 sec ...dull 3/4 sec...very 01 sec Made by Eastman Kodak Co Rochester USA Autotime patent 1908 cloud marine distant view ave rge view nearview portrait No markings on leather case.

Camera used by the Humphries family in the 1960'sRectangular box shape Kodak Instamatic camera 133. Front: silver & black colouring, with a rotating lens for daylight & night/flash, square lens, shutter button Back: black colouring with clear plastic window to show film cartridge (Name: HUMPHRIES) Right-hand side: hand strap Black vinyl zippered case for the camera, includes Kodacolor Film Cartridge Gold 200 Size 110Instamatic 133 Camera, Kodak (Made in England)

Camera: Black & Silver, Metal & Plastic. Lens protruding from the front / Shutter button, counter & flash connection on top / Tripod connection on the bottom Brown leather case in the shape of the cameraBraun Nornberg / Paxette Electeamatic

Leather covered camera, thin rectangle with curved ends (leather missing from expanding section). Concertina lens folds out by pressing button at the side, near film winder. Inside the hinged concertina section there is a lens, view finder and shutter button Camera has a leather case with long carry strap of similar size and shape. Original instruction manual inside carry caseCamera Case: E J Berry Bunyip Gippsland hand written inside Camera: Kodak on outside / No 1 pocket Kodak Series 2 Made in USA Eastman Kodal & co Rochester NY on inside

Black leather covered camera, thin rectangle with curved ends (leather missing from one curved end). Concertina lens folds out by pressing button at the side, near film winder, and manually pulling the concertina section outwards. Inside the hinged concertina section there is a lens, view finder and shutter button Camera has a brown leather case of similar size and shape, with long carry strapCamera Case: M Gunn Numurkah Victoria hand written inside Camera: Kodak on outside / No 1a Autographic Kodak Jr. Made in USA Eastman Kodal & co Rochester NY on inside camera, expanding, concertina, kodak

Pentacon AK8 8mm Movie Camera Carl Zeiss Jena Lens Made in Germany 1950s. Leather sides are coming away from the metal box. Brown leather case of similar size (Camera can be used whilst still in the case)AK8 (on front) Made in Germany (inside) 439629 (underneath, serial number?)

Leather case with leather strap, containing: * Plate Camera (rectangular shape, back opens for plates to be inserted, front opens out and concertina lens can be extended out * 6 x plates of the camera * red clothcamera, photography, plate camera, photos,

Round Lens Spectacle or Reading Glasses in Brown Case, Velvet Lined, Belonged to Mr Semmler stawell

Camera with brown leather carry case and an extendable lens."G.B. Kershaw 110 - Made in England"cameras, camera cases

The Vest Pocket Kodak cameras were a best-selling folding camera series made by Eastman Kodak (Rochester), from 1912 to 1926. They were the first cameras to use the smaller 127 film reels.(http://camerapedia.wikia.com/wiki/Vest_Pocket_Kodak) One of the items collected by Roger Jones.Listed in Draft Inventory of Significant Collection items. Appendix A.3, Snow sports equipment and other recreational items. (Pg 166 Historica)..1 Camera, small black metal with extendable leather sleeve with lens. Is covered in leatherette. .2 Camera case - brown leather with press stud closure."V.P AUTOGRAPHIC KODAK SPECIAL"

The heavy twin tanks formerly contained vaporised kerosene which was used as a fuel to light the lantern. Kerosene became available in the 1860s as the oil industry in the United States developed, and vaporised kerosene soon became the most common system of illumination. The kerosene vapour lamp was perfected by Chance Bros. for burning the light in their renowned lenses. The system involved vaporising kerosene under pressure and mixing it with air and then burning the vapour to heat an incandescent mantle. The lamp had to be watched throughout the night in case a mantle broke, and the tanks needed to be maintained by hand-pumping each hour or so. Kerosene tanks like these were developed in the early twentieth century, and kerosene as a fuel was phased out by electricity, with the last kerosene system in Australia eventually replaced in 1985. The wick lamp in Gabo Island’s light was altered to a vaporised incandescent kerosene mantle burner in 1909. They would have been in use until 1935, when the light was electrified and the original first-order lens was replaced by a fourth-order lens. The Gabo Island tanks, which are presumed to be those used in the lighthouse between 1909 and 1935, are not attached to the optical apparatus and are no longer in the lighthouse. They are also missing the pressure gauges that were formerly attached to the top of each cylinder. Cape Schanck has a pair of unattached tanks, which are not historically associated with the lighthouse. Point Hicks has an iron stand that formerly supported its lighthouse oil tanks. Despite their lack of intactness, the Gabo Island tanks have first level contributory significance for their provenance to the lightstation and historic association with the lantern’s original Chance Brothers first order lens, which was removed in 1935Two large green cylinders standing in a metal frame. There is also a pumping mechanism attached to the stand with a wooden handle.

A small number of heavy cast iron weights and two rods remain at the Point Hicks Lightstation. These weights comprise one rod with a forked top and four circular weights attached to the bottom of the shaft. The weights and rods were part of the original clockwork mechanism that was fitted beneath the lens to keep the kerosene‐fuelled light turning. They were attached to a cable or chains and moved vertically in similar fashion to the way weights move on grandfather clocks. As the weight fell, the optic clock was driven and the lens was turned. To keep the clock turning, the weight needed to be wound back up to the top of its travel. The cables and weights in this lighthouse were visible as they moved through the length of the tower up to the lantern room. It was usual for systems to move inside a tube extending up to the top, but in this case the tower’s cast iron spiral staircase, which is supported on cantilever cast iron brackets set into the concrete wall, spiralled around the space in which they moved. Lighthouse keepers had the arduous job of having to constantly wind the clock to keep the light active, and at least two keepers needed to observe a strict roster of hours. When electric motors were invented, all of this became redundant and the motors were able to turn the optic for as long as there was power to drive them. In December 1964, the original 1890 Chance Bros kerosene‐fuelled light and clockwork mechanism were replaced by small electric motor, and the number of keepers reduced to two. The six circular weights and rods originate from the obsolete system and may have been part of a larger set. Wilsons Promontory retains seven of its original set of ten weights, all of which are detached from the tower’s weight tube. Cape Schanck has a set of fourteen weights remaining in situ as well as another four detached weights, which have inscriptions. One weight is displayed in the lantern room at Cape Otway. The image shows four of the clockwork weights attached to a rod with a forked top. They were part of the original clockwork mechanism that was fitted beneath the lens to keep the kerosene‐fuelled light turning. The Aldis lamp in its case sits on the floor next to the weights. Source: Parks Victoria.The Point Hicks weights have first level contributory significance for the insights they provide into the superseded technology and operations of a late nineteenth century lighthouse. They are well provenanced and are significant for their historic value as part of the lightstation’s Chance Brothers optical system installed in 1890. Four circular metal weights are stored on a metal rod with a forked section at the top. The weights have a cut out section which allows the weights to be removed easily.

A small number of heavy cast iron weights and two rods remain at the Point Hicks. The weights and rods were part of the original clockwork mechanism that was fitted beneath the lens to keep the kerosene-fuelled light turning. They were attached to a cable or chains and moved vertically in similar fashion to the way weights move on grandfather clocks. As the weight fell, the optic clock was driven and the lens was turned. To keep the clock turning, the weight needed to be wound back up to the top of its travel. The cables and weights in this lighthouse were visible as they moved through the length of the tower up to the lantern room. It was usual for systems to move inside a tube extending up to the top, but in this case the tower’s cast iron spiral staircase, which is supported on cantilever cast iron brackets set into the concrete wall, spiralled around the space in which they moved. Lighthouse keepers had the arduous job of having to constantly wind the clock to keep the light active, and at least two keepers needed to observe a strict roster of hours. When electric motors were invented, all of this became redundant and the motors were able to turn the optic for as long as there was power to drive them. In December 1964, the original 1890 Chance Bros kerosene-fuelled light and clockwork mechanism were replaced by small electric motor, and the number of keepers reduced to two. The six circular weights and rods originate from the obsolete system and may have been part of a larger set. Wilsons Promontory retains seven of its original set of ten weights, all of which are detached from the tower’s weight tube. Cape Schanck has a set of fourteen weights remaining in situ as well as another four detached weights, which have inscriptions . One weight is displayed in the lantern room at Cape Otway. The Point Hicks weights have first level contributory significance for the insights they provide into the superseded technology and operations of a late nineteenth century lighthouse. They are well provenanced and are significant for their historic value as part of the lightstation’s Chance Brothers optical system installed in 1890.PHLS0005.1 Round cast iron weight with flat base used for lens clock-work mechanism attached to a bent metal rod. PHLS0005.2 Removable round cast iron weight with flat base used for lens clock-work mechanism stored above the other weight.

Was the stand for a Chance Brothers air & oil containers fitted with pump handle & pressure gauges.This type of installation was once common and relied on the lightkeeper having to pressurise the cylinders manually at regular intervals throughout the hours of darkness. The oil was fed under pressure to the burner mantle. It is all that remains of an air and kerosene oil tank installation, with each rounded side formerly supporting a heavy iron tank. The containers would have been fitted with a pump handle and pressure gauges. An intact assemblage is displayed in the AMSA offices, Canberra with a text that explains ‘This type of installation was once common and relied on the lightkeeper having to pressurise the cylinders manually at regular intervals throughout the hours of darkness’.The system involved vaporising kerosene under pressure and mixing it with air and then burning the vapour to heat an incandescent mantle. The use of kerosene as a fuel to light the lantern became the most common system of illumination from the 1860s after the oil industry in the United States began to develop. The kerosene vapour burner was created in 1901 by British inventor Arthur Kitson (1859-1937) and perfected by Chance Bros for burning a more intense light in their renowned lenses. The lamp had to be watched throughout the night in case a mantle broke, and the tanks needed to be maintained by hand-pumping each hour or so. The Point Hicks lantern was initially lit by a six-wick Trinity house kerosene burner. This was replaced by the more efficient and brighter 55mm vaporised kerosene mantle burner in 1905, and the tank stand is probably original to this apparatus. Electricity eventually replaced kerosene at Point Hicks in 1964 making the tank installation obsolete, and the last kerosene system in an Australian lighthouse was replaced in 1985. Gabo Island Lightstation has a pair of tanks that are not attached to the optical system and are no longer in the lighthouse. They are also missing the pressure gauges that were formerly attached to the top of each cylinder. An intact tank assemblage is displayed at the Cape Schanck Lighthouse Museum it is detached and not original to the lighthouse. Although corroded, the remnant Point Hicks tank stand has first level contributory importance to the lightstation. It is significant for its provenance and historical value as part of the Chance Bros vaporised kerosene burner introduced in 1905 to intensify the light and improve the efficiency of the system. The rusted iron stand rests on four short legs and is shaped like a pair of spectacles.

Pair of spectacles with flat lens and gold frame, in brown leather case.English made.spectacles, spectacle cases

Two pairs of spectacles. 1 - Tinted lens with gold rims and wings. 2 - Clear lens,with gold rims.spectacles, spectacle cases

The firm of Bolex Paillard Ltd is world-famous for its accomplishments in the field of amateur cinematography. Paillard Bolex cine cameras and projectors are designed and manufactured in Sainte-Croix, Switzerland, which was also the centre of the Swiss watchmaking industry. Originally Bol, the company was founded by Charles Haccius and Jacques Bogopolsky in 1925. The M8 line of projectors were first manufactured in 1949. Its relatively light weight, affordability and portability made this model popular with home movie and amateur film makers.This projector is representative of several types of home projectors popular in the second half of the 20th Century.A small projector and carrying case. It is made of cast aluminum and steel, painted with a Grey Silver finish. The upper reel arm folds downward and locks for storage and also serves as a carrying handle. The lens assembly pivots outward for easy film loading and unloading. The front legs can be adjusted individually for height. An AC outlet is position at the rear of the projector. The carrying case includes slots to hold film reels and the power cord.On one side: " Bolex Paillard/ Fabrication Suisse/ Made in Switzerland" M 8bolex paillard, cimematography, home entertainment

This mask set is part of the North East Region Water Authority collection in the Wodonga Historical Society. Wodonga's drinking water and wastewater operations were originally managed by the Wodonga Waterworks Trust, which was established in 1897, after Wodonga became a separate shire in 1876. In 1923 a Wodonga Waterworks Trust referendum to provide funding for new infrastructure to supply more water of better quality to Wodonga was passed. This included building the Wodonga Water Tower and it was completed in 1924. It supplied water to Wodonga until 1959, when it was drained and decommissioned after the No 1 Basin on Huon Hill was completed in 1958. In 1983 the Wodonga Waterworks Trust and the Wodonga Sewerage Authority became part of the Wodonga Council. And by 1989 a filtration plant at Huon Hill was completed, which provided filtered water of improved quality to Wodonga, in accordance with the World Health Organisation’s guidelines. In 1994 the Kiewa Murray Region Water Authority took over the Wodonga Council’s water and wastewater operations, and then in 1999 the Kiewa Murray Region Water Authority combined with the Ovens Region Water Authority and became the North East Region Water Authority or NERWA. NERWA then became known as North East Water. Siebe Gorman was a British manufacturer of industrial respirators that served the mining industry, the chemical industry, and the agricultural industry from 1938 until the 1980s. The "Puretha" line refers to the canister included, which was designed to tackle industrial hazards.Siebe Gorman "Puretha" Type C Kit with Vista Vision Facepiece. The facepiece consists of a formed plastic lens held on by a white retaining ring that stretches around the rubber facepiece and is connected by two thumbscrew lugs. The exhale assembly is covered by a steel mesh.The hose is a standard industrial hose. The canister is attached by a khaki webbing material. An instruction sheet is included. The kit is a small leather case with two front latches. Safety instructions and chemical information on canister label. On label: EVERYTHING FOR SAFETY EVERYWHERE Date filled 28 DEC 1961 NO. 675 north east region water authority, gas mask, respirator, sieba gordon

The Baby-Max is a Japanese subminiature camera popular in the 1950s and 1960s. It was often sold in a pack containing the camera, case and boxes of Kikufilm Panchromatic, a film specialised for toy cameras. Each film took ten 14x14mm images on 17.5mm paper backed roll. It was manufactured by Tougodo, a Japanese camera maker, active from 1930 to the early 1960s. The film with this camera has an expiry date of November 1962.This item is significant due to its popularity in the 1950s and demonstration of the evolution of camera technology.The Baby-Max is a Japanese subminiature camera. It has an elongated body with polygonal ends. The viewfinder is integrated in the top casing. There is a knob on the photographer's right to roll the film and there is a small fake knob on the left. The back is hinged to the right and locked by a sliding bar on the left. It contains a single uncovered window in the middle. The lens has a fixed focus and aperture, and has no markings. There is a lever to operate the shutter. The case is of brown faux leather. It is accompanied by a box of KIKUFILM.Around the central lens: "BABY-MAX / MADE IN JAPAN"baby max camera, cameras, cameras 1950

Purchased by Whitehorse Historical Society to record archival objects. Replaced as the recharger was not operating properly - thus camera unreliable for recording purposes.Camera (Kodak) easy share CX7330, 3.1 mega pixels. 37mm 111mm (equiv) AF 3x optical, all glass lenses. Kodak, Retina Aspheric Viewfinder.|Camera to Battery to Camera Transfer lead|Silver case, silver cord attachment.|4181-1 plastic battery box - grey (empty)|4181-2 Canon compact flash TM card FC 16 M|4181-3 Kodak Camera dock clear plastic. A total of 4 items.Kodak. Easy Share CX 7330photography, cameras

Black case containing Siemens movie projector. The carry case has an opening in top for handle to come through and two locking tabs on bottom of two sides and Siemens metal label on side. Camera is dark grey with two folding reel holders, one of which doubles as a carry handle through case top. Camera has electric cord and power switch on bottom right with two other switches. Two sides fold down, probably for cooling. Lens has siemens name on it and is focusable. Reels are driven by spring belts. Number H77702 on small tag on side above switches.SIEMENS ASH BESTER & CO. H77702photography, projectors