Historical Information: The anchor is from the wooden sailing ship CHILDREN, which was wrecked at Childers Cove east of Warrnambool on the 15th of January 1839 with the loss of 16 lives. The Children anchor was raised from the wreck site by Flagstaff Hill Divers; Peter Ronald, Garry Hayden (Terang, still), Tim Goodall (now Warrnambool), and Colin Goodall (now Warrnambool), on Sunday 3rd January 1974. A week or so later it was dragged up the cliffs and taken to Warrnambool. It is now on display near the entrance to the Maritime Village and Museum. It appears to be a Pering’s Improved Anchor, developed at Portsmouth after 1813. The addition of broad curvature to the anchor arms provided a stronger purchase than the pre-existing Admiralty Old Pattern Long Shanked Anchor with straight arms. However, the evidence of hammer-welding the separate pieces of the arms and palms to the central shank (peaked crown and flat palms) suggests the manufacture is before the 1831 Rodger’s Anchor design, (which cast both arms and their flukes as one piece that was then attached to the shank by a bolt through the crown). This identification seems consistent with the date of the CHILDREN’s construction in 1824. The CHILDREN was a three masted barque with a wooden hull built at Liverpool in England. She was bought by the Henty family of Portland (Australia Felix) in 1837 for regular coastal trading between Van Diemens Land, the Port Phillip District of New South Wales and South Australia. Only 255 tons burden (92 feet in length, with a beam of 25 feet and depth of 17 feet), she sailed from Launceston bound for Adelaide in late December1838, on her first Australian voyage and under the English master who had brought her out – Captain H. Browne. On board the CHILDREN were 24 passengers, including 9 children; the captain and 14 crew; livestock of 1500 sheep, 8 bullocks and 7 horses; general cargo of beef, pork, tobacco, tripe, butter, limejuice, horse hair, currants, lead shot, beer and spirits; 5,000 house bricks from London; and six whaling boats with associated whaling gear. The vessel was battered by gale force north-westerly winds shortly after setting out from Launceston on 11 January 1839 and adverse sailing conditions persisted for the next four days. At 11 pm on the 15th of January 1839, and many miles north and east of the captain’s navigated position, the CHILDREN struck the Pinnacle, a limestone stack off Childers Cove. Within half an hour the ship was completely destroyed. As well as the loss of livestock and cargo, 16 passengers and crew perished, including the captain, six men, one woman and eight children. In 1931 shifting sands at Childers Cove uncovered the skeleton of an adult male. In 1951 another two skeletons were exposed by storms, an adult male and a child. In 1963 some district scuba divers retrieved a small signal-cannon from the site. And in 1974 Flagstaff Hill recovered the anchor and some house bricks. The shipwreck of the CHILDREN is of state significance – Victorian Heritage Register No. S116.A large forged-wrought iron anchor from the wreck of the CHILDREN. Flat hammer-welded flukes on opposing curved arms and a peaked crown. It has a metal (elbowed) stock or cross-bar and a heavy duty pinned shackle (not ring) for the anchor chain. It is in fair condition but extensively corroded after 135 years on seabed (supported on display) .warrnambool, shipwreck coast, flagstaff hill, shipwrecked coast, flagstaff hill maritime village, flagstaff hill maritime museum, shipwreck artefact, maritime museum, the children, childers cove, anchor, pering’s improved anchor, 1839 shipwreck.

This item was originally made to put around a farm or herd animal to enable it to be identified and found if it strayed. Horses, cows, goats and oxen were the animals most commonly given neck bells in Australia as a way of identifying and finding cattle particularly in areas where prpoerties were unfenced or when droving large herds of mixed cattle. Drovers often marked these bells as a way of identifying which cattle belonged to them. Some of these bells from the 1860's onwards were imported to Australia and some were manufactured locally. The cow bell in various sizes is often still produced to sell to tourists, particularly those in Europe. Many of these souvenir bells contain some form of art work. Although this item has no known local provenance it is retained as an early example of the bells placed around animals’ necks to stop them from straying. This is a piece of metal welded to form a cover or a bell container with a bottom opening to hold a metal clapper which is held in place by a metal ring. The top has a metal handle. The bell is very rusted and stained.animal husbandry, warrnambool, history of warrnambool, cow bell

unknown8436.1 - Coal boring auger bit, handle missing. Tip is single-pointed; point of attachment for handle is rectangular-prism-shaped and the bit appears to be secured by means of welding together interlayered tonques of metal.

This bracelet was sent by a seafarer Mariner Merrilees while in Australia in the 1940s to his sister Marjorie, who lived on Manitoulin Island, Canada. The bracelet was received in a Mission to Seamen Christmas Greetings cardboard box in 1943.This bracelet was inherited by the donor, and kindly donated to the current collection of the Mission to Seafarers Victoria. This world war 2 era gift of a bracelet is significant in not only demonstrating the international significance to seafarers of the various Missions to seamen who facilitated contacts with family as illustrated by the gift box but in this instance the gift is also of historic numismatic interest. 19 Silver Peruvian ½ Dino coins made in 1902 linked to be used as a bracelet. The full piece contains 19 coins attached by metallic weld linked pieces and a silver spring clasp to hold ends together.Front side, FIRME Y FELIZ POR LA UNION / ½ DINO / LIBER / TAD Back side, REPUB : PERUANA LIMA 9 D : FINO J/F 1902 Coins Images: Front side, Woman sitting and holding a shield in her right hand and a paddle in her left hand. At the right side of the coin, there is a pedestal with a Laurel or olive leaf wreath on top and a ribbon with the word liberty in Spanish “LIBERTAD”. Back side, code of arms with a stamped inscription that said “REPUBLICA PERUANA LIMA 9D” dated from 1902.the mission to seamen, bracelet, christmas greeting, dino, numismatics, peru, lima, peruvian, coins, silver, jewellery, christmas, marjorie merrylees, manitoulin island, canada, robert leighton, gift, ww2

Plaque of circular flat brass cast design. Features a lion wearing a crown. Total design is situated in a circle, however four decorative prongs protrude from outer edge. Welded repair. "Reg" on back.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plaque

Special shape bracket,made from 100cm x 50cm x 6mm channel steel 59cm long, bent at 80* in middle and welded crossplate sections. 4 x 25mm holes one arm.

Kodachrome Transparency - 35mm slide - cardboard mount, with one side with red border and words "Kodachrome Transparency / Processed by Kodak" top and bottom. Photo taken by Ben Parle 8/4/1958. Has slide No. "6" stamped in black in top corner. Photo of Ballarat No. 20 inbound at View Point Junction, Macarthur St and Wendouree Parade. Has welding truck set up in front of tram. Tram has the destination of Victoria St. See Reg. item 2864 for photo of welding truck. "Drummond St. View Point Jtn Ballarat" / "8-4-58"tramways, trams, view point, macarthur st, wendouree parade, tram 20

Armour worn by Dan Kelly, Kelly Gang member and brother to Ned Kelly, during the Glenrowan Siege, August 1880.Armour worn by bushranger Dan Kelly including helmet (VPM1799.1); chest plate (VPM1799.2); back plate (VPM1799.3) and groin plate (1799.4). Armour constructed from heavy metal plough plates, bolted and welded together.Painted on inside of armour : 'Dan Kelly', 'Police Exhibition', 'E. Kelly' Impressed on plough VPM1799.3 'Huntly Crucible Cast'ned kelly, bushranger, kelly gang, dan kelly, glenrowan, victoria police

Booklet; buff coloured cover, printed with Barbweld, the new and better barb wire, electric welded. Image on front of sheep in paddock and barb wire. Barbweld was a later improved design of barbed wire from the makers of Barblok.bendigo, industry, abbott supply, abbott supply, barbweld, barbwire, advertising

Letter dated 24/2/1916 from F A McCarty HTT Engineer and Manager to Jas R Henderson, Construction Engineer PMTT about the supply and possibly welding the bonds between track joints to ensure electrical continuity.Has a close association with the two engineers named and their correspondence re working.Letter typed on HTT letterhead watermarked - "Sovereign Ultra Strong" and "British Made"tramways, htt, pmtt, electrical engineering, track work.

Photo shows Geelong 38 south bound to Belmont and welding truck - Moorabool St between Myers and McKillop Streets. The welding with the power supply from the overhead would most likely be repairing a broken joint. One of a set of photos was taken between 15/2/1956 and 3/3/1956 when services operated only between Belmont and North before the final closure of the Belmont route on 25/31956 and that bogie tram 31 is not shown on the board, having gone to Ballarat on 15/2/1956 - see item 5554. See item 8213 for an article on the Geelong system by Keith Kings. Yields information about the Geelong operations toward the closure of the tram system.Black and white Negative - 120 sizetramways, geelong, tram 38, moorabool st, welding truck, track repairs

B/W Photograph of W.E. Coward Carpenter & Joiner shop with O. Anderson Welding Shop next door - Jack & Cliff Earle & Pop & Fred Coward 1935-1936 - Scotland Place. Young man in background with a pushbike. streetscape

Documents, Bert Graham Collection, Bendigo East Swimming Pool, from Morris & Nova Austin of EEL Fabrication DLI Welding submitting a quotation for supply and fit 1 pair of gates at Eastern Park, their price for this work is $1,700.00.bendigo, clubs, bendigo east swimming pool

Anthea WILLIAMS The sculptural practice of Gippsland-based artist Anthea Williams includes welded metals, moulds and assemblages. She has lectured Visual Arts at Federation University, Churchill and has many years experience as a technician at Latrobe Regional Gallery. Large steel sculptureanthea williams, gippsland art collection, sculpture

This badge was found in a garden in Arnold Street, Bendigo. Not clear if WW1 or WW2, more likely WW1.Brass Badge. It has some evidence of writing that was originally on it. Moulded onto the front is the Aust Coat of Arms. Around the circumference are the words "Volunteered for Active Service" "Issued by Department of Defence" Medically Unfit. The rear has two loops welded in.On rear "Badge 60369."aust dept defence, badge

Hand Operated Rail Saw Out on the track in the old days, it was sometimes required to cut a piece of railway track. Before the use of generators and oxy cutting, the only way to do this was with a hand saw. This is the machine operated by two people, that would cut a piece of rail in half. And when the rail was cut, it was usually required to join it to another rail which required putting in 4 to 6 holes in the rail with a Hand Operated drill. Historic - Railways Permanent Way and Works - track equipment - Hand Operated Rail Saw Hand Operated Rail Saw made of cast metalpuffing billy, hand operated rail saw

The carbon rods were either used by 'Gem Pictures' or in the study of 'Electricity and Magnetism' at the Ballarat School of Mines. In electricity a current is conducted through carbon rod between the electrode holder and the arc in carbon arc lighting or welding. A carbon rod is also used in batteries. A tin full of carbon rodsOn box found with carbon rods: "Siemens-Planiawerke aktiengesellaschaft fur kohlefabrikate berline-Lichtenberg Made in Germany jede kohle trägt unseren vollen firmenstempel Translation: Siemens Planiawerke A corporation limited by shares producing carbon in Berlin-Lichtenberg Each carbon carries our full company stampballarat school of mines, carbon, carbon rod, arc lighting, electricity, henry sutton, theatre, projector, gem pictures

Coin Holder used by staff on the Bendigo Tramways.A pre-decimal, spring-loaded coin holder constructed using three various size brass tubes that are braise welded together. A red painted support bracket enables the holder to slide onto a belt. Designed to house threepences, sixpences and shillings.coin holder, tram

This pin was created by Miss Annie Emily Gardner to raise relief money to support industrial unrest in Newcastle. It was reported in the Newcastle Morning Herald that Miss Gardner was vice-president of the Women's Organising Committee of the Political Labour League. A copy of an advertisement for the pin has been uploaded here. Price of the silver pin was 2/- and gold 15/6. Photograph of the pin - to come. Donated to Ballarat Trades Hall by John Mildren. Significant to industrial action, union organising and the labour movement in Australia.Pin. Round. Sterling silver.Silver anchor superimposed over a white globe (with silver latitude and longitude lines). A safety pin is welded to the back. Blue outer circle with inscription: "Organized labor the hope of the world 1909". Inscription on the back: "USA ???" in very tiny font.btlc, ballarat trades and labour council, unions ballarat, ballarat trades hall, political labour league, artefacts - jewellery, gardner, annie emily, industrial action, campaigns, relief - fundraising

Candle stick manufacturing moulds were extensively used throughout the Kiewa Valley and its regions to provide rural homes and businesses with illumination during times of limited light e.g. night time. These candles were used before the Kiewa Valley was placed of the electrical grid. The candles were made from parrafin wax. Before the 1920"s electricity was in limited supply due to the inability of the private electricity suppliers to service isolated rural regions. It was not until the Victorian State Government passed legislation (1920) to improve electricity supplies by forming the State Electricity Commission of Victoria (S.E.C.V.) Isolated rural communities could not meet the higher costs to have electricity supplies connected and therefore it was not until the 1950's that adequate domestic electrical power could be supplied.The isolation that the Kiewa Valley provided was of a greater hindrance to any utility (power,roads & telephone) where the cost per instillation was beyond the rural population's ability to pay either directly or indirectly. One of the benefits that the "closed" community of Mount Beauty had, when it was administered by the SECV was that some utility costs were a lot lower than that of the other settlements in the Kiewa Valley. This disparity led to a conference in 1928 of the rural and regional councils to demand from the Government an equality of electricity tariffs. This equality did not take place until 1965. The demand and usage of cheaper and affordable lighting that wax candles provided was for some rural families a way of life until the mid 1900's.This candle making mould is made from mild rolled sheet steel(tin). The top basin is rectangular in shape with beveled edges(facing in on all sides. There are six holes in the top basin for vertical hollow tubes to feed off. The six tapered cyclindrical tubes running from the top basin to the bottom raised platform base. All connections are welded together. The bottom of each cylinder has an opening for the candle wick. The wick is positioned in place before the molten wax is poured into the cylinders. A positioning ring has been welded to one bottom ring for stability.parrafin wax, candles, domestic household ighting

From Left to Right: Wally Thompson ( Standing behind tool cart main layer) - Bert Hill (Foreman) - Ken Cain (Welder) - Jack Hawke (Service Layer) - Operation; preparing length of welded pipe. Early 1963. McIvor Road Hill.person, group, male group of workers

Yellow pipe connected to old concrete pipe. Main trench welding new to old, shadow of photographer, two tyres near pipe on left side, white flexible ring in centre foreground, orange safety netting lying along right side of the trench.Kodakorganisation, industry, gas and fuel

Colour slide of SW6 876 undergoing accident repairs at Preston Workshops. The tram is on stands in the body shop with one of the cabs removed, possibly for major repair or replacement. Welding marks can be seen in the front corner with the word "HOT" chalked on the side. A worker can be seen inside the tram body. Yields information about repairing accident damage at Preston WorkshopsKodachrome colour slides, cardboard mount, duplicate.Has "876" in pencil and stamped "Tramways Museum Society Victoria" on rear.tramcars, preston workshops, tram 876, sw6 class, tramcar maintenance, accidents

J. Austen chrome plated tongue depressor blade only. Size 2 1/4, stainless steel material. The top arm of the instrument has a serrated grip below to facilitate tongue adherence, also has a middle space canal with semi circular welded rings to possibly introduce or attach an anaesthetic tube. This piece has in its internal lateral side engraved the possible owner's initial and last name. Minor scratches and dust marks are present over the piece as well as oxidation spots around engraved name. Weld spots in metallic semi circles edges on top of the piece.Engraved at the internal side of the handle, V. BRAND Stamped at the external side of the handle, J.AUSTEN / 2 1/4 / STAINLESStongue depressor, medical instruments, airway instruments, j. austen

Leonard Vivian Lansell ( 16/10/1888-31/10/1963) was the son of mining magnate, George Lansell. He married Geraldine Orme in 1911. She was the daughter of a NSW grazier. Leonard was very active in Bendigo affairs, including President of the Bendigo Benevolent Asylum, the Bendigo Chamber of Commerce, The School of Mines and the Bendigo Art Gallery. He was also on the board of directors of several mines. As well as his Bendigo commitments, Leonard and Geraldine also ran the "Chah Singh" Station, near Moulamein, NSW. Resulting from this, he was appointed a pastoral inspector in 1929. After retiring to Toorak, the family was heavily involved in the Melbourne social scene. Although Leonard died in Toorak, he chose to be buried in Bendigo.Invoice book, beige cover with black spine. Invoices numbered from 417 to 496 all blank. At top left corner: Phone 999, L.V. Lansell "Chan Singh" Moulamein, Proprietor. At top right: PO Box 16 Thomas & Barker Engineers. "Fortuna", Bendigo, Inglewood Road. Dr. to L.V. Lansell's Engineering works, repairs effected to all kind of machinery, all classes of motor and oxy work done for trade. Interest charged on all overdue accounts.Notes 1-2-52 in blue pen on cover and in pencil 10 pounds change 4-2-52. On the second page in pencil under the heading Herbert a list of various items. On the last to pages a list of businesses with address and a list of items with the prices.business, invoices, l.v. lansell

Installed in the Westgarth Shopping Strip, the artworks include aerial, street level and inlaid pieces. The aerial installations consist of eight pairs of steel dragonfly wings. The street level series feature ten sculptural pieces of welded steel depicting enlarged body/skeletal parts of fauna that are indigenous to the area. The inlaid artworks are a series of stainless steel mosaic in the pavement.Five pairs of steel dragonfly wings mounted on eight painted PTC power poles. Ten sculptures of welded steel depicting enlarged body / skeletal parts of fauna that are indigenous to the area. These also function as bicycle racks. A series of stainless steel, ceramic and glass mosaic inlays.

Hand Rail Drill Out on the track in the old days, it was sometimes required to drill some holes in a piece of rail so that two rails may be joined together by a metal joiner – called a fishplate. Before the use of generators and oxy cutting, the only way to do this was with a hand drill. This is the machine operated by two people, that would drill a hole in the rail. With two to three holes to be drilled in each rail end (ie 4 or 6 holes), it was a tiring, back breaking job. And then there was usually the rail on the other side of the track to be done! Historic - Railways Permanent Way and Works - track equipment - Hand Rail DrillHand Rail Drill made of metal puffing billy, hand rail drill

This is a photograph of McKillop's Bridge probably taken just after its rebuilding. The current McKillop’s Bridge was built by the Country Roads Board in two stages between 1931-36, during which its height was raised after the original bridge superstructure was washed away in record floods of January 1934, prior to its original official opening. In its reconstructed form the original concrete abutments were turned into additional piers and the welded-steel trusses were cantilevered back over them to meet the new higher road approaches. "McKillops Bridge was Heritage listed due to its social and technological significance – the steel trusses' arc-welded construction technique was a pretty big deal in the 1930s. It was once an important route for cattlemen, who used the ford across the Snowy in the years preceding the bridge's existence"This is a pictorial record of McKillop's Bridge just after its construction.A black / white photograph of a wooden bridge across a river. At the bottom right is a man with his back to the camera. He is looking at flood debris on the bank. At the bottom left are two men near a pylon.on back - McKillops Bridgebridge-mckillop's snowy-river-bridge