The hat brush is an example of a domestic object that would have been common to most households in the late 19th and early 20th century.The hat brush is significant in that the inscription connects the brush to a prominent hat maker in the Western district whose business can be dated to the late 19th century. The address of the business was 24 Bridge St Ballarat and was owned by Mr Charles Morris. Curved wooden hat brush constructed from light polished timber. The handle end has a small hole in it and the front end is pointed. The bristles are two tone in a circling pattern and cut to follow the curved shape of the wood. There is a chip out of the wood exposing the bristle holes. The brush is stamped with the suppliers name and address.C. MORRIS, HATTER, (?) BRIDGE STREET, BALLARAT.flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, hat brush, wooden hat brush, natural bristles, c.morris hatter, hatter ballarat, c.morris ballarat

This wooden tap consists of two parts - the main body, and the tap which is made of the same wood and is polished. The body and the tap have been decorated with circular marking.Chandler's Fitzroy encircling a kangaroo. No 1 Reverse : H. Gage Maker Melbournewine, spiggot, tap, cask, barrel

Used in Building Studies at Ballarat School of Mines. The sander used to sand rough timber smooth, remove old finish from wood, put a bevel on a door, reduce the thickness of timber, dress up a poor saw cut. Also used for back cutting miter cuts for neater joints and for polishing and cutting.Stainless steel with rollers and sanding plate. Hand held. Continuous loop of sandpaper would be mounted.Maker's Plate: MILLER FALL TOOLS CATALOG 830 3 INCH BELT SANDER MODEM "C" USE 3" X 21" BELT 230/250 VOLTS 3 AMPS 25-60 CYCLES MADE IN USA PATENT 2,991,595 MILLER FALLS COMPANY, GREEFIELDS, MASS. TO CHANGE BELT PULL LEVER DIRECTION OF BELT ballarat school of mines, building studies, david flintoff, timber, smooth, miter cuts, polishing, buffing, thinning

Mulga, is an Acacia shrub or small tree native to arid outback areas of Australia. It is light, easy to carve and has strength and durability It is commonly used for turned objects or small decorative items. The wood is dark brown with yellow bands and polishes well. Traditional uses included spears, clubs and boomerangs. George Reed was a draftsman who lived in Bentleigh , City of Moorabbin in mid 20th CGeorge Reed was a draftsman who lived in Bentleigh , City of Moorabbin in mid 20th C and used this Mulga wood bowl in his officeA souvenir Mulga wood bowl with metal aeroplane on the lidearly settlers, market gardeners, wood carvers, souvenirs, mulga wood, acacia trees, boomerangs, vases, post world war 2 estates, bentleigh, mckinnon, highett, cheltenham,south australia, victoria,reed george, reed gladys, clark judy,

Made in England, O'Cedar Ltd Slough, BucksA small duster mop impregnated with 'O-CEDAR' furniture polish with cotton head and wood handle O'Cedar Dust Absorbing Handimop for your car - for your furnituremop, manufactured object, o'cedar

Six walking canes shaped from natural timber. 7543a Light coloured wood with top carved in shape of a snake head. 7543b Light brown wood with T shape carved top. 7543c Dark brown branch with bark intact. Natural branch at 30 degrees cropped at top. 7543d Thin dark brown bamboo like straight walking stick. Ornate carved knob at top. 7543e Light brown straight walking stick of three pieces of wood spliced together. Curved top spliced in place. Lacquered and polished. Metal band attached below hand grip (1.5 cm wide.) 7543f Rough natural branch with natural handle at 30 degrees angle.walking sticks, wooden objects, natural wood

The SZD-30 Pirat was designed by Jerzy Smielkiewicz and first flew in 1966. Over 700 have been produced. The example registered as VH-GYN which was donated to the Australian Gliding Museum by Alan McMaster is one of two that have come to Australia. It carries serial number B-333 and was imported as a new aircraft which was test flown on 29 August 1970. During its logged flying life (last entry 15 April 1990) it was operated in the Northern Territory and Queensland and passed through a number of owners before Alan McMaster at Rockhampton; initially the Alice Springs Gliding Club and then individuals at Charleville and Yeronga in South Brisbane. The aircraft flew 1909 hours from 2073 launches. The log discloses numerous silver distance and duration achievements. The Museum's Pirat sailplane is an example of this popular Polish sailplane type and is indicative of the state of sailplane design in the 1960s.Single seat sailplane of mainly wood construction (some plastic elements) finished in white with green detailing. Sailplane serial number B-333 and registration “YN” australian gliding, glider, sailplane, szd-30, pirat, mcmaster, alice springs, rockhampton

Men's black woollen dinner jacket with black polished cotton lapels. Single breasted fastened with one X 2cm black fabric covered button, with another button attached to the back. Body of jacket lined with black self stripe cotton fabric. Long sleeves lined with cream coloured polished cotton fabric with fine black stripes. Front pockets below waist have slit openings lined with black cotton fabric. Slits at wrists of sleeves (5cm) fastened with 1 X 1cm black fabric covered buttons. Found inside pocket, cotton button hole tab two black fabric covered 2 cm buttons. Hanging tape across inside back of neck (11cm X .7cm) cotton tape. Owner; Samuel John Tongway 1894-1988. Australian Dictionary of Biography. www.adb.anu.edu.au/biography/tong-way-samuel-john-14875Woods & Manson 48-50 Elizabeth St., Melbourne. Date 1/10/21. No.1542. S.J.Tongway.costume, male, men's black dinner jacket, has matching waistcoat.

Used by the Mah Meri people, Kuala Langat, Selangor (Malaysia), 1936. While Malaysian, this blow-gun is analogous to that used by Indigenous groups from South America with curare. The gun is of bamboo, with a highly polished inner tube of the same. The darts are reeds, made directional by knobs of a tudor wood, with poison made from the ipoh tree and the Strychnos vine The blowpipe examined in this report consists of a long bamboo tube with engraved floral motifs on the outside and a second bamboo tube inside. The mouthpiece is attached to the inner tube and the whole piece can be removed from the outer casing. There is a quiver, filled with darts, a small poisons receptacle, and a single dart and hollow bamboo tube, stored outside the quiver. The objects were donated as a whole to the museum in 1948 by Dr Thomas Edward Marshall. The engravings on the outer case originate from the Mah Meri community in Kuala Langat, Selangor, Malaysia. The floral ‘motif is of a vine with small incisions to reflect the properties/identity of the plant (poisonous/harmful)’. These motifs are generally handed down through the generations and can be used for kinship identification. They are also believed to enhance the performance of the blowpipe. The outer casing is made up of several pieces of bamboo fused together. Broken or damaged blowpipes were not discarded. Broken sections of a pipe could be removed and replaced as required, and the observably different bamboo sections suggest this has taken place at some point. Sap from the perah tree is used to seal or glue the pieces together and the glue is reversible by heating. The Mah Meri created a poison from the ipoh tree for use in hunting. The poison acted swiftly to kill the animal and did not result in secondary poisoning. The way in which the Mah Meri hunted is analogous with other blowpipe hunting practices elsewhere in the world. Blowpipe hunting practices represent a starting point for the introduction of standardised muscle relaxants into surgery during the 20th Century. In parts of South America, plant poisons were used to tip the darts and kill prey. These poisons are known as curare. The crucial ingredient in curare was Chondrodendron tomentosum root. Raw curare formed the basis for Intocostrin, the first standardised, mass produced muscle relaxant. The introduction of muscle relaxants dramatically changed surgery, allowing for more precise surgery and better patient outcomes. Bamboo blowpipes can be found in many museum and heritage collections, particularly those with strong colonial origins or influence. Blowpipes from Borneo seem to be well represented, along with those from Guyana. Blowpipes from Malaysia appear to be less common. More research is required to establish the rarity or representativeness of the blowpipe. Ownership of the blowpipe can be traced back from the museum to Dr Thomas Marshall. It has also been established the blowpipe’s point of origin is among the Mah Meri people of Kuala Langat, near Kuala Lumpur. There is no information regarding the way in which Marshall came into possession of the blowpipe. Provenance cannot be fully established. Despite these difficulties, the blowpipe represents a full set of hunting implements. It is accompanied by a quiver, also decorated with a floral motif, a set of bamboo darts, and a poison receptacle. The quiver also has a waist strap which enabled the owner to strap it to themselves, preventing its loss while hunting. Each object within the set is in good condition, although the inner tubing is beginning to split lengthwise and should not be removed from its outer casing. While the blowpipe and accompanying objects are not of South American origin, the techniques and poisons used are analogous and this object has high interpretative capacity. Hollow bamboo blowpipe with mouthpiece at one end. Two different types of organic fibre have been used at difference points along the shaft to secure different segments of the blowpipe. The item consists of two tubes a thin and unpolished inner tube that has degraded and can no longer be removed, and a polished and decorated outer casing. The outer casing is made up of different sections of polished bamboo, some pieces have developed a deep red hue which is likely the result of prolonged polishing and regular heating over many years, other sections are a lighter yellow indicating that they are newer pieces of bamboo. The entire outer tube is covered in a varied sequence of genomic patterns. The exact meaning of these patterns is unknown however they are passed down through family lineage, the exact family of origin is unknown. Connected to the mouthpiece if it is removed from the inner casing is a piece of cloth with the numbers 2241 written in black ink, their purpose is unknown.curare, malaysia, bamboo

There has been a fair amount of confusion about this object as the paperwork states that a 'greenstone' gavel with a maori head carving and plaque mounted on green nephrite stone' was gifted when in fact the gavel is made of wood with a silver plaque. There has been no suggestion made as to what happened to the greenstone gavel. We can assume that it was lost or stolen and replaced with a plain wooden one that we now hold at ANZCA. From the attached plaque the Gavel was gifted to the Faculty of Anaesthetists by the New Zealand Fellows of the Faculty in 1965. Plain highly polished wooden pestle sits on a central walnut block on a flat wooden board, a silver plaque is attached on a piece of nephrite stone to one side of the board.[silver plaque] PRESENTED BY THE / NEW ZEALAND FELLOWS / 1965 [in black ink on back of stand] 1992/9aotearoa, new zealand, wood, nephrite, corporate gift

Made by Internee,Roland Frank at Camp 3 TaturaSet of six round, polished, wooden shank buttons threaded onto a piece of card.accessories, buttons, wood, camp 3, tatura, internees, berti, costume, accessory

Made by Internee Roland Frank at Compound B Camp 3Set of 15 wooden buttons ,round, polished of varying sizes:10 have shanks, 5 have two holes in the centre, all are attached with wire to a piece of plywood. Numbered 1-15 in pencil. On plywood are more numbers/figures.in pencil nos 1 - 15 and other numbers on the plywood boardaccessories, camp 3, wood, buttons, tatura, internees, costume, accessory, clothes, frank roland

Made and used by POW Camp 13.Knife, beautifully carved and polished from dark timber. Used as letter opener.POW "Australien" 1944knife, pow, camp 13, murchison, letter opener, wood

Made in Camp 3Oval, dark coloured, polished wooden bucklebuckle, wood, vollmer h, camp 3, tatura, ww2, handcrafts, woodwork

Small polished metal commemorative plaque mounted on a wood block."The first Service was held at St Andrew's Warrigal Road Oakleigh 4-6-1865, This emblem was dedicated 5-7-1959 and remained in the sanctuary until Church Union 22-6-1977."

Knobkerrie are clubs used as weapons mainly in South and East Africa. The club end can be used to throw at an animal or to club an enemy's head in. Usually these would be carved from a protruding tree branch. The name is Afrikaans and comes from 'Knop', meaning knot or ball and 'Kierie', meaning cane.Accessioned into the museum collection in 1913 and donated by a Mrs Newcome, there is not much other information on its provenance. However, the museum collection holds several artefacts from this region of South Africa and much of it was collected during the Boer Wars of 1880-1881 and 1899-1902.A wooden club type object. It has a narrow cylindrical handle with a large wooden sphere at the top. The wood is shiny and smooth with a polished effect. The handle is 31.5cm long with a 2cm diameter and the head or knob has a height of 9.5cm and a circumference of 27cm.This would have been hand carved from a protruding tree branch. Towards the end of the handle is a 13.9cm section of zig-zag patterning. Further down towards the 'knob' there looks to be carved into the wood 'Jud'.knobkerrie, boer war, zulu, south africa, ethnography, weapon

A wooden racquet with a split open throat, and long handle. The base of the head on the obverse features decal inscription: PRESIDENT. The short stem on the reverse features a decal of a crowned garter with the inscription: E. KENT. Remnants of the inscription DUCO PERMANENT/HIGH POLISH FINISH, feature across left side of stem. Materials: Wood, Glue, Lacquer, Metal, Gut, Ink, Leather, Cloth, Stringtennis

A wooden racquet with a split open throat, and long handle. The base of the head on both sides features decal inscription: SPEEDWOOD. The short stem on the obverse features a decal of a crowned garter with the inscription: E. KENT. Company logo also features on red cloth butt cover, impressed in gold.The inscription DUCO PERMANENT/HIGH POLISH FINISH, feature across right side of stem. Patent information across left side of stem. Materials: Wood, Glue, Lacquer, Metal, Gut, Ink, Leather, Cloth, Stringtennis

Polished timber meeting desk with SGSC logo on front. The desk is the central part of a set used in Council meetings in the main Chambers at Leongatha. The brown wood desk features the Council's carved logo affixed to front. The logo is created from four varieties of timber.

Wood plaque with silver engraved plate affixed to front. Features a map of Victoria in the centre and logoat bootom edge. Dark polished timber.

Wandin Thomas Sebire JP (1867-1960) learnt boot-making as a young man. In a small workshop on his property in Sebire Avenue, Wandin he made boots for family, friends & neighbours. He also repaired boots & made other small leather articles. Bootmaking is a complex process requiring a variety of tools. The leather is cut to shape, glazed & burnished (polished) with heated irons. The pieces are stretched onto, & nailed to, a wooden last to form the boot. Once attached to the insole, the boot is finished on a metal last. Uppers are stitched with waxed thread through holes made with an awl. Heels comprise pieces nailed together & neatened with a heel shave. Metal plates, short nails or hob nails driven into the sole & heel, often in a pattern, improved durability.Wooden bookmaker's repair stand, opens slightly at one end. Two pieces of wood connected by two screws.bootmaking tools