Set of two Newspaper cuttings about the condition of tram track. .1 - Newspaper clipping from The Herald Sun, 3/9/1991 - titled "Tram Danger - Brown", written by Mark Gardy. reporting on a leaked PTC report about tram tracks condition. Opposition transport spokesman Mr Brown released the report. The Minister Mr Spyker, said the track was safe. Gives some details of extent and costs and a map showing affected sections. Also a report about the PTUA calling for an inquiry into the price of transport fares in Victoria. .2 - Newspaper clipping from The Age 5/9/1991 - titled "Track disrepair threatens to derail tram services", about the same topic and reports. Article by Jacqui Macdonald and with a photo of Alan Brown looking at tracks and derailment marks outside the South Melbourne depot. Photo by Sebastian Costanzo.trams, tramways, trackwork, maintenance, repairs, ptc, ptua

Digital image - four pages - of a report to the Melbourne Tramways Trust, preliminary report looking at the condition of the tramway track - rails, wood blocks prior to the take over of the Tramway by the Trust (1916). Prepared by T Hamilton Engineer and Secretary, dated 10/3/1913 assisted by Gerard Wight of Melbourne Uni. Looks at each line, rail wear, opening dates, rail weight, and condition of blocks. Also looks at the covenants or conditions of lease for the track and tramway, Completes report with notes about repairs, maintenance and renewals and legal advice of Sir John Madden. See item 9151 for an original copy.trams, tramways, melbourne, cable trams, track, trackwork, reports

Drawing - "PTC - Southbank Light Repair Centre" - showing the first stage of the Southbank tram depot, 1996. Provides a site plan showing tram tracks, maintenance building, amenities and adjacent roads. The depot has since been extended. Prepared by Leighton Contractors for the PTC. Yields information about Southbank tram depot 1996A3 sheet printed - two copies held.tramways, southbank tram depot, leighton contractors, trackwork

Book - green Rexene covers, with title - "Melbourne and Metropolitan Tramways Board - Works Codes and Instructions". Six sections, sewn into covers, dated April 1961, signed by J. J. Fisher, Civil Engineer. 118 pages plus covers. Book numbered "46". Provides an list of contents, giving provisional codes or instructions for works, instructions, about the maintenance and repair of the track welding, safe working, watchmen, care of lamps, and plant. 2nd copy added 5/5/2019 from donation of Barry Brooks ex Bob Prentice Collection. Images revised - jpgs removed and pdf added.Inside front cover has a signature and date of 9/8/61 in ink and inside rear cover "not entered" in pencil. Could be a reference to a Court document - see Reg item 94.trams, tramways, mmtb, track, maintenance

Document undated, most likely SECV, sets out the methods for the resealing of tram tracks in Geelong for either grooved rail or T rail. Demonstrates a document that sets out the procedure for the repair of the road surface in Geelong.Document - typed quarto sheet original.tramways, procedures, track maintenance, geelong, trackwork

Emerging from the base of Wombat Creek Sutton Spring has two mineral water pumps. The spring is named after the Sutton brothers of Cornwell, who discovered it while looking for alluvial gold along Wombat Creek in the 1850s. By 1900, a trench had been dug to expose the spring, and a pipe had been driven through the spring eye. Sandstone rockwork encircled the trench. On 27 February 1907 the Sutton Mineral Spring Reserve was gazetted. By that time the trench had been enlarged and rendered, and a lean-to shelter had been built over the approach track. In 1927 Wombat Creek was rerouted allowing the land around the spring to be cleared and pipework repaired. Five bores were dug in 1929 and equipped with hand pumps. The bores were all shallower than 9.7 m. An attempt was made to replace one of these bores with a new bore, however it was not possible due to ground instability. These two bores are the oldest of all the mineral springs open to the public. Also in 1929 Council contemplated encouraging private enterprise to establish a ‘hydrobath’ similar to those in Europe, after mineral water had been discovered flowing from several other vents in sandstone and slate strata below the typical level of the creek. However, the option was not enacted although at the time to capture the flow another bore to a depth of 15m was sunk. In 1936 architect P. Scott Williams adopted a similar notion and examined the prospect of establishing a Hydropathic establishment above Sutton Springs, assuming a reliable mineral water supply could be found. That idea also lapsed. In October 1997 the Sutton Spring trench was restored to enable the public to again take mineral water at the spring. The restoration included clearing the sides of the creek and removing willow root growth. In 2002 a major overhaul of the trench and its underground works was undertaken and all plumbing replaced. This involved re-routing the creek through sandbagging, covering the spring eye with geofabric and then concrete. Unfortunately due to ongoing water quality issues, public access to take water from the trench was closed, however the trench can still be viewed.A mineral water spring at Daylesford is surrounded by a drystone wall. mineral water, sutton spring, daylesford, central springs, p. scott williams

Set of documents Edgar Allen & Co of Sheffield promoting and providing information about the Woods Gilbet Rail Planing machine. 1 - letter dated June 1917, sent from the South Australian Hotel in Adelaide to Mr Pringle, of ESCo from the travelling representative of the company, a letter on Edgar Allen & Co letterhead with a list of various articles on the machine, and a letter from Woods Gilbert of their Melbourne office, dated Jan. 1917 2 - A 30 page printed booklet contained within a green cover titled "Rail Planing Machines" with Mr Pringle's name written on it in the top right-hand corner. 3 - Photograph of the rail planing machine with "1916 type rail grinding machine" on rear in pencil along with the Company stamp. 4 - Drawing of the Milling Trolley prepared by Atlas Co of Engineers Melbourne 5 - drawing - Cardiff-rail-section Woods-Gilbert 6 - photograph - Woods-Gilbert Recording instrument on a postcard by Kodak Magazine extracts: 7 - Woods-Gilbert Tramway and Railway World-12 Oct 1916 - page 1 of 2 8 - Woods-Gilbert Tramway and Railway World 12 Oct 1916 - page 2 of 2 9 - Woods-Gilbert Tramway and Railway World Nov 1916 - page 1 of 2 10 - Woods-Gilbert Tramway and Railway World Nov 1916 - page 1 of 2 11 - Woods-Gilbert Tramway and Railway World - 12 Apr 1917 page 1 of 2 12 - WoodsGilbert Tramway and Railway World - 12 Apr 1917 page 2 of 2Yields information about the Woods Gilbert Rail planing machines for repair of rails and removal of corrugations.Set of 12 documents with letters, pamphlet, photo, drawing and magazine cuttings.tramways, trams, esco, rail planing, woods - gilbert, track, rails, tramway rails, maintenance equipment

Drawing No. 939 signed and dated by the Chief Engineer, Mr. Strickland on 31-5-1922, Drawing "Built up Yoke", for contract No. 158 shows a cable tram Yoke possibly to be used in the link between Swanston St and Lonsdale St (west) or repairs. Signed by James Henderson Engineer for Permanent Way. The yoke could be used to support a cable pulley.Demonstrates a drawing made for cable tram track parts during the early 1920s.Drawing - blue print - No. 939trams, tramways, cable trams, trackwork, yokes

Photo of workers re-blocking or renewing - resetting the red gum blocks in the cable tracks in Russell St opposite the Law Courts. From the Herald Sun, 9/4/1925.Yields information about the method of repairing cable tram tracks in Melbourne.Black and white print with plain back printed on light card.tramways, trams, cable trams, track work, track maintenance, russell st