Showing 2717 items
matching turned
-
Arapiles Historical Society
Docket Holder
Commercial /shop equipment, turned wooden handle and wire hook,docket holder, shop -
Friends of Westgarthtown
Bell
Bell with pressed sheet metal body and turned wooden handle.No visible markingsbells, bell, kitchen, meal time. -
Vision Australia
Medal - Object, Helen Keller medallion, 1980
Produced by Lions International to commemorate the 100 years since the birth of Helen Keller, who was a pioneer in changing attitudes and rallying support for the blind and vision impaired community in the United States of America, as well as around the world.Silver medallion with profile of short-haired woman turned to the leftHelen Keller in profile with the words 'Helen Keller Centennial 1880-1980' on front side. "While they were saying among themselves it can not be done it was done' - Helen Keller (script on back) collectibles, medals -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, 1880s to 1910s
This handmade green glass bottle was made using the turn-moulded or rotated-moulded method, a variation of the mould-blown process. The bottle has the remnants of a cork seal in its mouth. It possibly contained ginger beer, soda or mineral water, flavoured drinks, liquor or wine. TURN-MOULDED BOTTLE production method This bottle was handmade using the ‘turn-moulded’ process, one of a variety of mould-blown processes that followed the earlier mouth-blown method. The maker would add a portion of hot soft glass to the end of his blowpipe then blow air through the pipe while placing the end inside a bottle mould. The mould was then turned and twisted, giving the bottle a round, seamless body, and usually a round indented base. The cooled body of the bottle would then be finished with the addition of an applied top. A small amount of soft glass would be applied to the top of the bottle and a lip would be formed using a tooling implement. A concentric ring would also form below the lip, caused by the rotated lipping tool. The bases of bottles made with the turn-moulded method were generally not embossed but would commonly have a mamelon or ‘dot’ in the centre of the base. SEALING THE BOTTLE After filling this type of bottle with its contents it is then sealed with a straight, cylindrical cork with the aid of a hand operated tool called a bottle corker. The bottle corker compresses the cork as it is driven into the bottle. Once inside the bottle the cork expands evenly into the opening to tightly seal the contents – the denser the cork the better the seal. This turn-moulded glass bottle is made distinctive due to its round seamless body and indented base.Bottle, dark green glass. Handmade turn-moulded bottle with seamless body and tooled lip. Deeply indented base has push-up mark with a ‘mamelon’ bump in the centre. Bottle is straight from base to half height, then tapers to a shoulder over the next quarter, than almost straight up to the mouth. There is a portion of cork in the bottle’s mouth and dry remnants in the bottle’s base. Possibly used for ginger beer. Produced in 1880s to 1910’s. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, green glass bottle, handmade glass bottle, bottle with indented base, turn-moulded bottle, rotate-moulded bottle, tooled lip on bottle mouth, applied lip bottle, bottle corker -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, 1880s to 1910s
This handmade green glass bottle was made using the turn-moulded or rotated-moulded method, a variation of the mould-blown process. The bottle has the remnants of a cork seal in its mouth. It possibly contained ginger beer, soda or mineral water, flavoured drinks, liquor or wine. TURN-MOULDED BOTTLE production method This bottle was handmade using the ‘turn-moulded’ process, one of a variety of mould-blown processes that followed the earlier mouth-blown method. The maker would add a portion of hot soft glass to the end of his blowpipe then blow air through the pipe while placing the end inside a bottle mould. The mould was then turned and twisted, giving the bottle a round, seamless body, and usually a round indented base. The cooled body of the bottle would then be finished with the addition of an applied top. A small amount of soft glass would be applied to the top of the bottle and a lip would be formed using a tooling implement. A concentric ring would also form below the lip, caused by the rotated lipping tool. The bases of bottles made with the turn-moulded method were generally not embossed but would commonly have a mamelon or ‘dot’ in the centre of the base. SEALING THE BOTTLE After filling this type of bottle with its contents it is then sealed with a straight, cylindrical cork with the aid of a hand operated tool called a bottle corker. The bottle corker compresses the cork as it is driven into the bottle. Once inside the bottle the cork expands evenly into the opening to tightly seal the contents – the denser the cork the better the seal. This hand made, green glass bottle is representative of bottle making before mass production and is made distinctive due to its round seamless body and indented base.Bottle, dark green glass. Handmade turn-moulded bottle with seamless body and tooled lip. Deeply indented base has push-up mark with a ‘mamelon’ bump in the centre. Bottle is straight from base to half height, then tapers to a shoulder over the next quarter, than almost straight up to the mouth. There is a portion of cork in the bottle’s mouth and dry remnants in the bottle’s base. Possibly used for ginger beer. Produced in 1880s to 1910’s. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, green glass bottle, handmade glass bottle, bottle with indented base, turn-moulded bottle, rotate-moulded bottle, tooled lip on bottle mouth, applied lip bottle, bottle corker -
Orbost & District Historical Society
Bread maker, Landers Frary and Clark, Early 20th century
Bread machines were made for quite a long time from the 1890's on. They came in different heights and capacities. The advertisements at the time stated that making bread with their machine was superior to hand kneading, This item is good example of a domestic appliance used when most foods were home-made. Access to commercial bread was limited in rural areas and housewives became skilled at bread-making.Metal bucket with lid. Lid has hole in centre through which a handle for turning the dough hook comes. Grey rusty coloured.Put in all liquids first, then flour, turn 3 minutes, raise in pail. After raising, turn until dough forms a ball. Take off cross piece, lift out dough with kneader.bread domestic-appliance bread-maker food-technology bakery -
Ringwood and District Historical Society
Photograph, The left turn lane from Oban Rd. into Warrandyte Road, North Ringwood 1981
Written on back of photograph, "The left turn lane from Oban Rd. into Warrandyte Road". -
Flagstaff Hill Maritime Museum and Village
Wash stand
Wash stand wooden varnished dark. Shelf under & turned legs.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Flagstaff Hill Maritime Museum and Village
Furniture - Table
This wooden table is a classic, simple design seen in kitchens in the 19th and 20th centuryThe table is representative of furniture of the 19th and 20th centuryTable; wooden with four wooden turned legs, varnished, and unvarnished top. flagstaff hill, warrnambool, maritime museum, maritime village, flagstaff hill maritime museum and village, furniture, table, kitchen table, dining -
Coal Creek Community Park & Museum
Air Canister
tall air canister with a flat surface able to turn a valve for air -
Tatura Irrigation & Wartime Camps Museum
Toy - Spinning top, 1940's
Made by internee at Camp 3, Tatura and used by children there as a spinning top toy.Hand turned wooden ridged and tapering to metal tip, spinning toptop, bissinger g, wied g, camp 3, tatura, ww2, toys, general -
Tatura Irrigation & Wartime Camps Museum
Domestic object - Egg Cup, c1940
made and used in camp 3 Tatura during WW2Fawn coloured, hand turned wooden egg cup exterior varnishedegg cup, wood, camp 3, tatura, glenk, handcrafts, woodcarving, domestic, items, food, drink, consumption -
Uniting Church Archives - Synod of Victoria
Photograph, John Williams 'Random Writings' - Christmas begins at midnight, 1984
John Williams was an occasional contributor to C&N under the heading of 'Random Writings'. This article was entitled "Christmas begins at midnight" and it concerns the general theme of Christmas and its origins.Head and shoulders photo of Williams, head slightly turned to his left.C&N identification.williams, john, christmas -
Uniting Church Archives - Synod of Victoria
Ceremonial object - Commemorative Trowel, c1918
Silver commemorative trowel with a turned wood handle in a worn cardboard box."PRESENTED TO W.R.Little AT THE LAYING OF THE FOUNDATION STONE OF THE MOONEE PONDS METHODIST SUNDAY SCHOOL. FEBY 23rd 1918"moonee ponds methodist sunday school, little, w.r. -
Clunes Museum
Container - CHURCH COLLECTION PLATE
USED IN THE FREE PRESBYTERIAN CHURCH. GLENDONALD CHURCH, ONCE ON THE PROPERTY NOW KNOWN AS SNIZORT. CHURCH WAS PULLED DOWN ABOUT 1925 AND THE CONGREGATION TRANSFERRED TO ST. DAVID'S, COGHILLS CREEK.ROUND WOODEN COLLECTION PLATE ON TURNED COLUMN AND BASE, PRE 1884IN PEN ON BASE: COLLECTION PLATE GLENDONALD CHURCH PRE 1884local history, handcrafts, woodwork -
Whitehorse Historical Society Inc.
Pamphlet, Auction, 1/10/1998 12:00:00 AM
Auction of a turn of the century weatherboard cottage in Blackburn South.Pamphlet advertising the auction of a turn of the century weatherboard cottage in Blackburn South.Auction of a turn of the century weatherboard cottage in Blackburn South.auctions, holland road, blackburn south, no167. -
Emerald Museum & Nobelius Heritage Park
Wooden Hub of Jinker Wheel
Bill Cuzen's grandfather had a dairy (Robertson) at Marysville, and he had a jinker dray and other types of machinery.Timber turned hub of jinker wheel. There are 16 oblong spoke holes. -
Bendigo Historical Society Inc.
Photograph - CASTLEMAINE GAS COMPANY COLLECTION: PHOTO FIRST BURN OFF NATURAL GAS, 1973
First Burn Off Natural Gas Bendigo, Turned in 1973. On the front the words ''Not Published''. On rear 7-8-1151 and written in pencil 'first burn off natural gas Bendigo. Turned on 1973'.Kodakbendigo, industry, gas and fuel -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, 1880s to 1910s
This handmade green glass bottle was made using the turn-moulded or rotated-moulded method, a variation of the mould-blown process. The bottle has the remnants of a cork seal in its mouth. It possibly contained ginger beer, soda or mineral water, flavoured drinks, liquor or wine. The bottle’s shine has been worn from around 3/4 of its body, indicating that it has been resting horizontally on an abrasive surface, perhaps in the ground or on a river or sea bed. TURN-MOULDED BOTTLE production method This bottle was handmade using the ‘turn-moulded’ process, one of a variety of mould-blown processes that followed the earlier mouth-blown method. The maker would add a portion of hot soft glass to the end of his blowpipe then blow air through the pipe while placing the end inside a bottle mould. The mould was then turned and twisted, giving the bottle a round, seamless body, and usually a round indented base. The cooled body of the bottle would then be finished with the addition of an applied top. A small amount of soft glass would be applied to the top of the bottle and a lip would be formed using a tooling implement. A concentric ring would also form below the lip, caused by the rotated lipping tool. The bases of bottles made with the turn-moulded method were generally not embossed but would commonly have a mamelon or ‘dot’ in the centre of the base. SEALING THE BOTTLE After filling this type of bottle with its contents it is then sealed with a straight, cylindrical cork with the aid of a hand operated tool called a bottle corker. The bottle corker compresses the cork as it is driven into the bottle. Once inside the bottle the cork expands evenly into the opening to tightly seal the contents – the denser the cork the better the seal. This turn-moulded glass bottle is made distinctive due to its round seamless body and indented base.Bottle, dark green glass. Handmade turn-moulded bottle with seamless body and tooled lip. Deeply indented base has push-up mark with a ‘mamelon’ bump in the centre. Bottle is straight from base to half height, then tapers to a shoulder over the next quarter, than almost straight up to the mouth. The shine has been worn from three-quarters of the body of the bottle. There are particles adhered to the inside of the bottle. Possibly used for ginger beer. Produced in 1880s to 1910’s. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, green glass bottle, handmade glass bottle, bottle with indented base, turn-moulded bottle, rotate-moulded bottle, tooled lip on bottle mouth, applied lip bottle, bottle corker -
Maffra Sugarbeet Museum
Beet Hoe
These hoes were the standard thinning tool for sugarbeet, and allowed a standard space between seedlings. Thinning was back-breaking work, usually carried out by a transient work force.These hoes are probably still commonly in the possession of old gardeners. They are important as the only tool required of a large, transient workforce that worked under extremely difficult conditions.A metal thinning hoe of four piece construction, with a turned wooden handle attached to the tool by a nail. The blade is welded onto a bent holder, which is in turn welded to the metal extension of the handle. There is cloth inside the ferrule.sugarbeet -
Mont De Lancey
Furniture - Chair, 1920's
Restored kindergarten chair from the Methodist Sunday School in Wandin. (Old ones were sold to the Congregation for 2/6pence each in the 1960's). Purchased by Valmae Gaudion, and stripped of many layers of paint.A small brown wooden kindergarten chair, with four round turned legs, a seat and back support which is joined to the two long side supports with four screws. These supports are also made of turned round wood.chairs, children's furniture, furniture -
Flagstaff Hill Maritime Museum and Village
Tool - Screw driver
Screw driver with chipped blade. Wooden handle is turned. Inscription is stamped into handle.(Inscription is indecipherable)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, screwdriver, tool, hand tool -
Cheese World Museum
Butter churn, Cherry T1
Square wooden butter churn. Metal shaft on handle with turned wooden handle. -
Flagstaff Hill Maritime Museum and Village
Furniture - Table
Some very early tables were made and used by the Ancient Egyptians around 2500 BC, using wood and alabaster. They were often little more than stone platforms used to keep objects off the floor, though a few examples of wooden tables have been found in tombs. Food and drinks were usually put on large plates deposed on a pedestal for eating. The Egyptians made use of various small tables and elevated playing boards. The Chinese also created very early tables in order to pursue the arts of writing and painting, as did people in Mesopotamia, where various metals were used. The Greeks and Romans made more frequent use of tables, notably for eating, although Greek tables were pushed under a bed after use. The Greeks invented a piece of furniture very similar to the guéridon. Tables were made of marble or wood and metal (typically bronze or silver alloys), sometimes with richly ornate legs. Later, the larger rectangular tables were made of separate platforms and pillars. The Romans also introduced a large, semicircular table to Italy, the mensa lunata. Plutarch mentions use of "tables" by Persians. Furniture during the Middle Ages is not as well known as that of earlier or later periods, and most sources show the types used by the nobility. In the Eastern Roman Empire, tables were made of metal or wood, usually with four feet and frequently linked by x-shaped stretchers. Tables for eating were large and often round or semicircular. A combination of a small round table and a lectern seemed very popular as a writing table. In western Europe, the invasions and internecine wars caused most of the knowledge inherited from the classical era to be lost. As a result of the necessary movability, most tables were simple trestle tables, although small round tables made from joinery reappeared during the 15th century and onward. In the Gothic era, the chest became widespread and was often used as a table. Refectory tables first appeared at least as early as the 17th century, as an advancement of the trestle table; these tables were typically quite long and wide and capable of supporting a sizeable banquet in the great hall or other reception room of a castle. https://en.wikipedia.org/wiki/Table_(furniture)The table is one of the most important items of furniture used in the home, including the kitchen.Table wooden with 4 wooden turned legs and unvarnished raw wood topNone flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, table, kitchen furniture -
Blacksmith's Cottage and Forge
Wooden Spoon
Used for stirring a multitude of kitchen produced food, especially jam, scones, cakes, and soup. Also used by the mother as a threat to naughty children. The word spoon derives from an ancient word meaning a chip of wood or horn carved from a larger piece.[1] Wooden spoons were easy to carve and thus inexpensive, making them common throughout history. Wooden spoons have been made in virtually every nation on earth and (compared to silver or pewter or gold spoons) represent the ordinary artisan and reflect the life of ordinary folk: this is their "folk art". Source: www.wikipedia.org An essential item found in the kitchen. One piece wooden spoon. Turned marble-shaped decoration at end of handle.kitchen, food, spoon, wooden, stirring, mixing, jam, cakes, batter -
Flagstaff Hill Maritime Museum and Village
Tool - Fid, 1940s
A Fid is a conical tapered wooden tool used for separating the strands of rope for splicing. They were a tool traditionally made of wood or bone used to work with rope and canvas in marlinespike seamanship. A Fid differs from a marlinspike in material and purposes. A marlinspike is used in working with wire rope, natural and synthetic lines also may be used to open shackles, and is made of metal. A Fid is used to hold open knots and holes in the canvas, and to separate the "lays" (or strands) of synthetic or natural rope for splicing. A variation of the Fid, the grip fid, is used for ply-split braiding. The grip fid has a jamming cleat to pull a cord back through the cord split by the fid's point. Modern Fids are typically made of aluminium, steel, or plastic. In addition to holding rope open to assist the creation of a rope splice, modern push fid's have markings for precise measurements in a variety of sizes of rope. The length of these fid’s is typically 21 or 22 times the diameter of rope to be spliced. Fids have been used since sailing vessels were first used to travel the worlds seas the tool was invented to be used to splice rope and with working with canvas sails. A Fid is a sailors tool that has maintained its general design for hundreds of years and gives a snapshot into what the working life was like for sailors on board sailing ships for hundreds of years. The tool in its original design is still in regular use today by recreational sailors all over the world to splice and join lengths of rope.Metal Fid painted brown, flattened point turned end and hole for a lanyardNoneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, marlinspike -
Churchill Island Heritage Farm
Print - Print of Margaret Amess (1861 - 1941) 2 of 2, 1930s
Margaret Amess was the youngest child of Samuel and Jane Amess, who first purchased Churchill Island in 1872. Margaret Amess was renowned for her china painting.1 sepia toned head study of Margaret Amess, face turned to left."MONTEATH"margaret amess, samuel and jane amess -
Coal Creek Community Park & Museum
Telephone
Corded handle/handset two bells Turn able handle to make callReplace handset when finished amd ring off S.T.CC D^D Press key while speaking -
Coal Creek Community Park & Museum
Gas lamp
Turnable valve Red and Green glass gems, Red is trigger then the Green A HandlePanther PcH B'HAM -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Crochet
Most likely collected and donated by Dr Frank Forster.Crochet, with slightly tapered rod, ["Continental" marked on label] and with a rosewood turned handle.obstetric delivery, destructive instrument, crochet