Showing 534 items
matching u.s.a.
-
Whitehorse Historical Society Inc.
Audio - Army earphones, c 1940
A pair of earphones from the Army, World War 2Two black bakelite earphones connected to metal hinges and two cloth band head rests. Brown material wire at receiver fitting end; there is no connection fitting.Type TH 37A|OTE-49028 (on metal)|Telephonics Corporation New York NY OTE 490 800HZcommunication, radio, arms, ordnance -
Whitehorse Historical Society Inc.
Memorabilia - Pen St John's Mitcham Centenary, 1988
Produced and distributed during commemoration of Centenary of St John's Catholic Church MitchamBlue and black ink biro pen with plastic steel ball point and top with steel pocket clip and steel trim. The barrel of the pen has a printed dull gold logo and text.Logo: oval logo 'SJM/ with faith and love'|'1888 - 1988 / St John's Mitcham Centenary'|End of barrel: 'Made in USA'domestic items, writing equipment -
Whitehorse Historical Society Inc.
Machine - Sewing Machine, c1860s
Willcox and Gibbs: Serial No. 158679.|The Willcox& Gibbs Sewing Machine Company was founded in 1857 by James E. A. Gibbs and James Willcox and opened its London Office in 1859 at 135 Regent Street . By 1871 the Company's Chief Office for Europe was at 150 Cheapside, London, this office was later moved (post 1885) to 94 - 96 Wigmore Street, then 37 & 39 Moorgate Street (by 1891 to post 1907) and later 20 Fore Street, London .Right from the initial production the manufacturing of the Company's single thread, chain stitch machine was undertaken by Brown & Sharpe, Rhode Island and this continued up until 1948.|A special hand crank mechanism was produced in England for the European market, but the general design of the Willcox& Gibbs remained essentially the same throughout its production. The only major improvement was in 1875 when the glass tension discs were replaced with an automatic tension device which ensured the machine could not get out of adjustment.|In addition to the domestic hand and treadle machines the company produced a wide range of industrial models.|The Company finally closed in 1973.|This Willcox& Gibbs came complete with its wooden carry case. The machine was made in America in the late 1860's but it has the ornate hand crank produced at Coalbrookdale near Telford, England which was, in Victorian times, renown for producing high quality ornate iron castings. This machine has the glass tension discs which were used on domestic models until 1875. The Willcox& Gibbs badge is located on the rear of the base casting and it also has a deep wooden base.|The cloth plate has various American patent dates, four dating between 1857 & 1860 relating to J. E. A. Gibbs, three dating between 1860 & 1864 relating to Chas H. Willcox (son of James Willcox), the machine was also licensed under five other patents including the infamous Elias Howe patent of 1846.|There are only two English patents one for J. E. A Gibbs and the other for James Willcox.Upright sewing machine. Machine is quite small and set on wooden table. Ornate metal sides and treadle feet. One drawer. Brass name medallion on back.Willcox & Gibb Sewing Machine co, New York.|Other inscriptions are :-|London, Paris|Measures|Thread type|Needle 12 stitches to inch|Brevettees G.D.G.|En France|Eten Delgique|Under Royal Letters|Patent|James Willcox|July 4 - 71 [1871]handcrafts, equipment -
Whitehorse Historical Society Inc.
Clothing - Red Nylon Petticoat
Red nylon, deep laced trimmed half slip or petticoat - elastic waist - straight skirt - 15cm red lace trim on hem line.Warniers 100% Nyloncostume, female underwear -
Whitehorse Historical Society Inc.
Equipment - Camera
No.2 Brownie Box Camera Model F with black strap. Smaller than the No.2A (see NA1858).Used 120 film. Leatherette covered over possibly jute board. Lift up metal tag to change aperture. Provision for portrait or landscape photo. Winder for film and shutter lever are on side.No2 Browniephotography, cameras -
Whitehorse Historical Society Inc.
Equipment - Camera, c1915
Camera was originally owned by the owners grandfather and used by him at home and overseas. Later given to his son (donors farther)Brownie Autographic Folding No.2 Camera. Uses 120 roll film. Has a steel inscribing pin for writing on film through window on back of camera to record details. Has a ball bearing shutter - patented in USA, Jan 18, 1910 - Jan 7, 1913. Bellows folds back into camera and can be adjusted to 8,25, or 100 feet from object. Viewfinder can be varied from portrait to landscape view. It has a leather handle - film loaded by opening clip on lower front. Leather carrying case with name of original owner -G.H.Parsons, Melbourne, Victoria, Australia.photography, cameras -
Whitehorse Historical Society Inc.
Functional object - Raisin Stoner
Long curved stand from clamp to body. Two exposed circular grinders, one with handle, one screwed to hopper.Enterprise M.F.G. Philadelphia.P A. USA. Pat apr 2 Aug 20 & Oct 5 07 'Wet the Raisins' No36domestic items, food preparation -
Whitehorse Historical Society Inc.
Machine - Household Chopping Machine, Mechanical Chopper, c1886
Used in kitchen to cut carrots, cheese slices, onions. boiled eggs, etc.Painted black guillotine on a wooden stand. An iron pole keeps the guillotine in vertical position at one end of the block. Driven by two wheels when a handle is turned. A tilting beam moves the guillotine up and down to cut vegetables, etc. Blade 18cm long by 6.5cm wide. Metal plate missing under blade. A rotatable drum to contain the food to be chopped, which is rotated by a cog at the base (also missing) turns the container. The upright holding chopper blade e is a modification made because of the missing container.|The following description is from Ken Turner Booklet referred to under 'Reference'. ----|The Starrett food chopper would certainly have to be considered one of the more interesting inventions, which incidentally is now considered the ultimate in kitchen collectables. Laroy Starrett in later years' told of how the design of his food chopper was inspired by the action of the walking beam engine used on the Mississippi steam boats. When the crank handle of the chopper is turned, this sets in motion a mechanism which is just fascinating to watch. The crank activates a flywheel which in turn, by a series of cogs and levers, simultaneously rotates a food holding container and raises and lowers within the rotating container, a guillotine like 'chopping blade - the action does not only look like that of a beam steam engine, it even in a way sounds like one, although somewhat noisier. Starrett produced seven different models of these choppers, ranging in size appropriate for domestic use to heavy duty models for butchers, restaurants and for hotel use. The small model was capable of chopping 3lbs in three minutes, and the largest had a capacity for chopping something like 100 lbs in an hour. The mechanical chopper, which became affectionately known as the 'hasher', was the first of some one hundred of Starrett's inventions, and these include a washing machine patented in 1865 which had a similar action to his food chopper, a food press patented in 1873, and a device for lacing shoes he patented in 1886.domestic items, food preparation -
Whitehorse Historical Society Inc.
Vehicle - Orchard Spray Unit, C1915
It is presumed that the spray unit was imported in 1915 and a local manufacturer (unknown) made the wooden barrel and cart and mounted the Ballarat made motor and the imported spray unit.|Following the purchase of the R.E.Gray property, Nunawading Council Engineer, John Herbertson on finding the Spray Unit suggested that it become part of the Implements display at Schwerkolt Cottage.Myer Orchard Spray. It consist of the spray unit which is driven by a Ronaldson-Tippet Motor. The large wooden barrel spray container (mounted on the cart) contained approx 100 gallons of highly corrosive spray (hence the use of wood). The Myer pump is a twin plunger type.Myer 4078 on the barrel of the pump. Myer 3573 0n the inspection plate.rural industry, orcharding, machinery, engines - internal combustion, pumps -
Whitehorse Historical Society Inc.
Machine - Lawn Mower - Hand
Simple pushable hand mower with wooden handlesQualcastdomestic items, gardening -
Whitehorse Historical Society Inc.
Functional object - Lawn sprinkler
Lawn sprinkler with two splayed legs acting as a stand. Hose fixture on one side. Top shaft with nozzle at either end. Shaft on wheel to allow it to spin.Rain King Pat Fan 1956 P2056 Chicago Flexible Shaft Co Chicago.domestic items, gardening -
Whitehorse Historical Society Inc.
Domestic object - Wringer, Pre 1940
2007 - All metal parts treated for rust; wood carefully cleaned to preserve printing then treated with museum mixture.Hand operated two roller - spring pressure clothes wringer for mounting ( with two clamps) on the divider between the clothes trough.Anchor Brand No. 672 on top bar.|Anchor Brand Insignia on four uprights with LM Co. Erie P.A .|'oil here'(followed by an arrow) on four places near cogs.domestic items, laundering -
Whitehorse Historical Society Inc.
Machine - Sewing machine
Small, very early sewing machine with spindle handle which moves upper arm and allows needle to drop between teeth. Screws onto a bench.Wheeler & Wilson MFG.Co. New York Union Square.domestic items, sewing -
Whitehorse Historical Society Inc.
Tool - Post Drill Set
Used by donor's father, John Palmer, on his parents dairy farm at Mupunga East and later on his own dairy farm at Allansford. From 1966 until 1992 used in Mitcham and Blackburn.A post mounted drill stand with a gearing arrangement driven by a handle. The depth of drill is adjusted by a large red wheel which raises or lowers the drill. There are other adjusting devices on the drill.Buffalo Forge Co, Buffalo N.Y. No 151 (on both sides of main casting)trades, tools, metalworking -
Trafalgar Holden Museum
Container - wooden box without lid, Ca 1900
Shipping container for packages of Harness dressingImported and sold by Holden and FrostSmall wooden box without lid, with inscriptions of contents printed on outerOn all sides, Every owner of harnesses should use Frank Millers Harness Dressing manufactured by Frank Miller AND sONS On all sides is printed ," Every Owner of Harnesses should use Frank Millers Harness Dressing. Manufactured by Frank Miller and Sons, New York." box, unlidded, printed -
Trafalgar Holden Museum
Container - Wooden Box minus lid
Box used for transportation of Harness dressingsImported and sold by Holden and Frost Wooden box without lid with inscription printed on sideson both sides and ends, "Owners of Harness should use Frank Miller's Harness Dressing. Manufactured by Frank Miller and Sons, New York."box, timber, lidless -
Dandenong/Cranbourne RSL Sub Branch
Tin, The Curran Corporation
Possibly used in WWII or Vietnam campaigns?Khaki coloured tin of rifle cleaning oil.Shake well before using. P.O. No. (28.024) 44 - 40700.2 -
Dandenong/Cranbourne RSL Sub Branch
Flying goggles with spare lenses and instruction booklet, Approx 1944
Korean War/Japanese Occupation period historical significanceFlying goggles used by A34219 Stuart Simpson. Also contains lenses used for different flying conditions and instruction booklet. Goggles are with original box.Nil -
Whitehorse Historical Society Inc.
Equipment - UNIVEX Camera Model A, 1933
Small black camera with box like section at front and broader section at rear, to hold film. It has a film winding wheel at one side on top; at other side a small square raised section with a small hole to look through align with a small hole to look through and align with a folding metal frame to focus photograph. A small lever on side at front operates the shutter. A hole at front is lens, not adjustable. It comes apart at rear to place film inside. Cost new $US0.39 USED UNIVEX 00 FilmUNIVEX Universal Camera Corporationphotography, cameras -
Trafalgar Holden Museum
Container - Bickmore powder, Ca1900
Powdered medicinal dressing for cattle and horses Ca1900Imported and sold by Holden and FrostSquat tin flask with shaker on top of press lid yellow in colour, instructions printed thereon Bickmore powder for the treatment of superficial cuts and wounds on horses or cattle. Directions printed on the rear of the tin powder, medicinal, bickmore -
Trafalgar Holden Museum
Container - Graphite grease
Dixons flake graphite used as a dry lubricantAs imported, used and sold by Holden and FrostRectangular red painted tin with press lid contents and manufacturer printed on tinDixons Flake graphite 5Lb 2.27 kg Nettgraphite, lubricant, dry -
Flagstaff Hill Maritime Museum and Village
Instrument - Bass Drum, Ludwig & Ludwig, Early 1920's
This Marching Bass Drum is mid-size at 68 cm; these drums can range from 35 to 81 cm (14 to 32 inches). A Marching Bass Drum is slightly smaller than a Concert Base Drum and larger than a Kit or Drum Set Bass Drum. The drum is supported by a shoulder harness with a pin that connects to the eyelet incorporated on the shell of the drum, which keeps the drumheads vertical. The drum is played with one or two felt-covered drum mallets. The six tension rods connected between the drumheads can be screwed tighter or looser to change the tension of the calfskins on the drumheads, which changes their tune. This Marching base drum was made in the early 1920s by the firm Ludwig & Ludwig of Chicago, Illinois, USA. LUDWIG & LUDWIG: - William F. Ludwig was a professional drummer. He and his brother Theobold established the Ludwig & Ludwig drum factory in Chicago in 1909. They became famous for their invention of a bass drum pedal that could play faster beats on the bass drum. Theobald passed away in 1918. By 1923 Ludwig was the biggest drum manufacturer in the world. William continued on when his business was bought by C.O. Conn, but in 1937 he left to begin his own company; the WFL Drum Company. William and his son Bill purchased the Ludwig & Ludwig name back from Conn, and the name William F. Ludwig II continued on. The brand was sold to the Selmer Company and moved to Monroe, North Carolina in 1998, at the time of the 75th anniversary of the Ludwig name. Ludwig drums are still being manufactured over 100 years later. Many famous musicians and bands played the Ludwig bass drum, including Ringo Star who was the drummer in the 1960’s group The Beatles.This marching bass drum is significant for its connection to Ludwig & Ludwig, a famous and popular drum manufacturer established in 1909. The firm was once the largest drum manufacturer in the world. It is known for supplying drummers of fame, such as Ringo Star of The Beatles. This is the only drum in our collection. It is also rare, having only six tension rods, where most have from eight to twelve.Marching Bass Drum; the polished shell around the body is one continuous sheet of timber that has been steamed, shaped into a cylinder and joined together. The drumheads on the sides of the shell are strong timber strips joined into hoops that hold stretched, hand-painted white calfskin. Six Long Tube threaded nickel-plated brass tension rods are evenly spaced around the drumheads between the drumheads. A brass eyelet is fitted into the shell halfway between each drumhead, providing a connection point for the drummer’s shoulder harness. The eyelet has an indecipherable inscription. An oval brass plaque with a central formed hole has a stamped inscription. The imperial size is 27 x 13 inches. The drum was made by Ludwig and Ludwig, Chicago, Illinois, in early 1920's. On brass plaque; “LUDWIG / TRADE MARK / LUDWIG & LUDWIG / CHICAGO”flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum and village, shipwreck coast, great ocean road, shipwreck artefact, marching drum, bass drum, marching bass drum, pitched drum, band drum, drum mallet, marching band, military band, percussion instrument, calfskin, shoulder harness, ludwig & ludwig, wfl drum company, william f. ludwig, chicago, north carolina, the beatles, tension taps, tension rods, drum pedal, long tube tension rods -
Whitehorse Historical Society Inc.
Tool - Kitchen Cutter
The donor stated that the machine is about 100years old.Metal food cutter with rotary blade and handle. Base has lower shaft with screw to attach to table.Sterling Slicer No.10 NRS&Co Rochester New Yorkdomestic items, food preparation -
Trafalgar Holden Museum
Vehicle - Chevrolet Comaro, 2010
Vehicle designed in AustraliaDesigned in Australia Built in the U.S by ChevroletYellow bodied with black stripes, 2 door CoupeOn front and rear boot cover Chevrolet Logo SS Grille RHS SS Right hand boot lid, Comaro both front mudguards vehicle, comaro -
Whitehorse Historical Society Inc.
Domestic object - Clock, 1867 - patent date
Back panel has been stuck to case. Original case would have had feet due to length of pendulum. Dial now fitted does not relate to this clock. Original dial is on back of new dial.Mantel clock in ash veneer on a spruce case. Eight metal decorative clasps around case. Roman numerals on clock face. Four round wooden legs. Clock has a suspension pendulum.horology, clocks -
Whitehorse Historical Society Inc.
Audio - Phonograph, c1890
Black Edison Phonograph - black base, handle (wind-up) metal cylinder, metal horn and Wooden cover.'Gem'audio-visual technology, audio appliances, musical instruments, accessories -
National Vietnam Veterans Museum (NVVM)
Vehicle, Cessna 0-1 L-19 Bird Dog Aircraft
The shell is painted dark green & beige. There is an insignia on the side with a navy blue circle with a white star in the middle. Two red squares with 2 yellow stripes on either side.cessna o.1 bird dog -
National Vietnam Veterans Museum (NVVM)
Vehicle, Kiowa Helicopter
Former ADF - Army Bell 206 B-1 Kiowa helicopter (incomplete).A17-007kiowa, helicopter, navy, bell company, transport -
Whitehorse Historical Society Inc.
Shuttle, c1923
Spool with thread used for tatting or lace making. Patent applied April 17 , 1923'Boye' Improved. More Thread - Less Knotshandcrafts, equipment -
Flagstaff Hill Maritime Museum and Village
Book - Reference, M. Franklin Kline, Official Shippers Guide, 1930
This book has information about shipping companies and the world's ports. It was a handy guide for travellers of the time and included how and where to board ships going to various countries in 1930 & 1931. In effect, it was a reference work like a timetable for shippers and travellers alike.The book has maps depicting N.Y.K. shipping lines all over the world, indexes (including advertisers), and is thumb-indexed. This book is an official guide that supplies vast information for ships and shipping lines but also for tourists of the time. These types of reference works are keenly collected today.Official Shippers Guide reference book to the Principal Ports of the World, OSAKA SHOSEN KAISHA, 1930 – 1931, Seventeenth Edition, edited, compiled and designed by M. Franklin Kline. Large, hard covered, bound book with margin thumb tabs. Covers are dark red with gold lettering and embossed pattern. Centre of front cover has an oval image of a red steam ship on a gold sea. Above the ship is a white flag with a red emblem.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, traveller's guide, shippers guide, osaka shosen kaishaguide, guide to world ports, m. franklin kline