Used for twisting square rod whilst held in a vice.rural industry, farm machinery, trades, blacksmithing

Used for twisting square rod whilst held in a vice.rural industry, farm machinery, trades, blacksmithing

Used for twisting square rod whilst held in a vice.rural industry, farm machinery, trades, blacksmithing

Used for twisting square rod whilst held in a vice.rural industry, farm machinery, trades, blacksmithing

George Hotchin was a trader on Church Street, Geelong West who began assisting the club in its first year and then became a committee member and auditor and supporter of Junior riders until the mid 1920's.The GWCC required assistance from traders and from other community members. Black and white photograph of George Hotchin who was a Club Official c 1912."G. Hotchin/Vice President"g. hotchin; vice president, gwcc; 1912;

Soft Cover Magazine, Robin Boyd was the Senior Vice-Presidentarchitecture, australian architecture, walsh st library

Soft Cover Magazine, Robin Boyd was the Senior Vice-Presidentarchitecture, australian architecture, walsh st library

Soft Cover Magazine, Robin Boyd was the Senior Vice-Presidentarchitecture, australian architecture, walsh st library

Soft Cover Magazine, Robin Boyd was the Senior Vice-Presidentarchitecture, australian architecture, walsh st library

Soft Cover Magazine, Robin Boyd was the Senior Vice-Presidentarchitecture, australian architecture, walsh st library

Soft Cover Magazine, Robin Boyd was the Senior Vice-Presidentarchitecture, australian architecture, walsh st library

Soft Cover Magazine, Robin Boyd was the Senior Vice-Presidentarchitecture, australian architecture, walsh st library

This item is part of the Federation University Art Collection. The Art Collection features over 1000 works and was listed as a 'Ballarat Treasure' in 2007. Deputy Vice Chancellor's Visual Art acquisition Award, 2007art, artwork, mark fox, fox, lightening, landscape

Ali Dad AFZALI Born Hazarajat, Afghanistan In 2017 and 2018 the Federation University Australia Foundation awarded the Foundation Asylum Seeker scholarship for 2018 to Ali Dad Afzali. Ben Quilty wrote of Ali Dad Afzali on his blog:- "New paintings, sculpture and video of my young friend Ali Dad Afzali who braved the Timor Sea, smugglers and a wild storm, against his mother's wishes to come to Australia. Ali was 16. Ali is now studying art at Federation University in Ballarat after being generously awarded a full scholarship by the university. He is waiting patiently for his refugee status. I am very proud of this body of work. The exhibition is for Ali and for his Hazara people." (https://www.pictame.com/user/benquilty/885785586/1325284963800834113_885785586, accessed 31/05/2019) Winner of the 2018 Federation University Deputy Vice-Chancellor's Awardali afzali, hazara, refugee, asylum seeker, alumni, available

One of a collection of over 400 photographs in an album commenced in 1960 and presented to the Phillip Island & Westernport Historical Society by the Shire of Phillip IslandPicture of Vice Regal Rolls Royce crossing bridge to Newhaven - 1962local history, photography, photographs, vice regal visit 1962, black & white photograph, phillip island bridge, rolls-royce, new warley hospital opening, john jenner, bryant west

A mandrel (/ˈmændrɪl/; also mandril or arbor) is one of the following: * a round object against which material can be forged or shaped; or * a flanged or tapered or threaded bar that grips a workpiece to be machined in a lathe. A flanged mandrel is a parallel bar of a specific diameter with an integral flange towards one end, and threaded at the opposite end. Work is gripped between the flange and a nut on the thread. A tapered mandrel (often called a plain mandrel) has a taper of approximately 0.005 inches per foot and is designed to hold work by being driven into an accurate hole on the work, gripping the work by friction. A threaded mandrel may have a male or female thread, and work which has an identical thread is screwed onto the mandrel.Iron frame with handle. Vice section for attaching to bench. Mandrel for shapingmachine wheel, mandrel, forged, shaped, holds workpiece

Foam-backed accreditation certificate issued 31st December 1985, registering the Probus Club of Ringwood with the Probus Centre - South Pacific.Signatures of Chairman, Vice Chairman and Secretary.

Certificate for Ian Sheppard, dated 18.11.1986 in original envelope.Signed by the Vice Principal, David Aldous.ian sheppard, david aldous, students, principal

THIS COPY OF PHOTOGRAPH WAS TAKEN FROM COLLAGE OF CLUNES GUN CLUB. JANUARY 1903. REG. NO. OF COLLAGE 1001.1.2.3COPY OF PHOTOGRAPH OF MR. A. KERSHAW. VICE PRES. MEMBER OF CLUNES GUN CLUBlocal history, photography, photographs, gun club

THIS COPY OF PHOTOGRAPH WAS TAKEN FROM COLLAGE OF CLUNES GUN CLUB. JANUARY 1903. REG. NO. OF COLLAGE 1001.1.2.3COPY OF PHOTOGRAPH OF MR.T. FAWCETT. VICE PRES. MEMBER OF CLUNES GUN CLUBlocal history, photography, photographs, gun club

The Officer in Uniform was Major Phil Chapman OC of 15th Transport Sqd based in Bendigo in the old Passchendaele Barracks depot in Mollison Street where the Battle Honour board was held. The other in civilian clothes is Cliff Richards who was Junior Vice President of the Bendigo RSL Sub Branch at the time. The photo relates to the Board being donated to the Bendigo RSL Museum in the SMI building in January 1999. The 38th Battalion AIF was known as Bendigo's own, raised in Bendigo in 1916 for service in the Great War. Due to its size it was placed high up in what was the Billiard Room in the Museum. After a major renovation to the BDRSL Inc Club in Havilah Rd in 2013 it was then placed over the foyer front entrance. Due to another up grade it was placed in storage for awhile and is now on display in the rear foyer patrons entrance. Refer Cat No 8176.Photograph colour showing one person in military uniform and another in civilian clothes, the Officer is steadying the 38th Battalion Battle honours board.On rear in black pen, "Jan 99 C Richards Jnr Vice - Major Chapman OC 15th Tpt Platoon".brsl, smirsl, 38th

Emily Martin was a student of Telegraphy at the Ballarat School of Mines..1) Cream foolscap paper with blue Ballarat School of Mines logo and handwriting. The memorandum is signed by Registrar Andrew Berry and Vice-President James Oddie and concerns Emily Martin's Certificate of Competency in the Art of Telegraphy. .2) Letter from Ballarat School of Mines registrar, Andrew Berry, to Emily Martin of 31 Grattan Street, Prahran.Handwritten "Memorandum this is to certify that Emily Martin passed the examinations at this institution held in April 1875 and on the recommendation of the Examiners was awarded a Certificate of Competency in the Art of Telegraphy by the Council of the School. Certificate No. 80. Received by Miss Martin 15th April 1875. James Oddie Vice President Andrew Berry Registrar 22.8.1885"ballarat school of mines, telegraphy, emily martin, oddie, james oddie, andrew berry, mine haulage

The subject item is a saw blade sharpening clamp that attaches to a bench allowing the operator to sharpen the teeth on a saw with a file while keeping the saw blade in an upright position. Henry Disston (1819–1878) began his career as an American saw maker in Philadelphia. He emigrated from England in 1833 and started making saws and squares in 1840. In 1850, he founded the company that would become the largest saw maker in the world the ”Keystone Saw Works” on the Delaware River. Some five years later, Disston built a furnace possibly the first melting plant for steel in America and began producing the first crucible saw steel ever made in the United States. While his competitors were buying good steel from Britain, he was making his own, to his specification, for his own needs. Disston subsequently constructed a special rolling mill exclusively for saw blades. Over the following decade, the Disston company continued to grow, even while dedicating itself to the Union Army's war effort. In 1865, when his son Hamilton Disston rejoined the business after serving in the Civil War, Disston changed the company's name to Henry Disston & Son. Henry Disston and his sons set the standards for American saw makers, both in terms of producing high-quality saws and developing innovative manufacturing techniques. Disston also started making files in 1865. In September 1872, Henry Disston and two other men dug a part of the foundation for what was to become the largest saw manufacturing facility in the world: Disston Saw Works. This was in the Tacony section of Philadelphia. Having previously moved his expanding business from near Second and Market Streets to Front and Laurel Streets, Disston sought to establish his business away from this cramped area. It took over 25 years to move the entire facility to Tacony. This Philadelphia neighborhood seems to have been the only company town in the United States established within an existing city. At its peak of operations, Disston Saw Works employed 8,000 people and the factory covered 300 acres. The company, known as Henry Disston and Sons, Inc by the early 20th century, cast the first crucible steel in the nation from an electric furnace in 1906. The firm's Armour plate building near Princeton Avenue and Milnor Street contributed tremendously to the World War II effort. But the company's innovation and industriousness would not last forever. In 1955, with mounting cash-flow problems and waning interest on the family's part to run the firm, Henry Disston and Sons were sold to the H.K. Porter Company of Pittsburgh. Porter's Disston Division was sold in 1978 and became the Henry Disston Division of Sandvik Saw of Sweden. This division was then sold in 1984 to R.A.F. Industries of Philadelphia and became known as Disston Precision Incorporated, a maker of specialized flat steel products. In 2013, R.A.F. Industries sold Disston Precision Inc. in a private sale. Although the company has ceased making Disston handsaws, the Disston brand name still exists in this firm. A significant American company that pioneered the making of high-quality steel and saws along with other tools and accessories. The subject item is significant as it was made at a time when the company was in its hay day. Adjustable Ball & Socket Saw Sharpening vice, cast iron, with clamp to attach to a workbench. Made by Henry Disston & Co. No 1 painted greyflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, saw clamp, henry disston & sons, saw sharpening, tool accessories, wood saws

THIS COPY OF PHOTOGRAPH WAS TAKEN FROM COLLAGE OF CLUNES GUN CLUB. JANUARY 1903. REG. NO. OF COLLAGE 1001.1.2.3COPY OF PHOTOGRAPH OF MR. G. FRASER. VICE PRES. MEMBER OF CLUNES GUN CLUBlocal history, photography, photographs, gun club

In 1996 and 1997 the University of Ballarat made a series of changes in response to the reductions in Commonwealth operating grant funding announced in the 1996 Commonwealth budget, and the university staff salary increases then being negotiated. The university decided that it would make its major decisions about changes as part of a continuing process of strategic repositioning. Brown soft covered book of 92 pages. Contents include the formation of the University of Ballarat, Review of the Office of the Vice-Chancellor and University administration, the process of strategic repositioning, Commonwealth budget (1996), Vice-Chancellors forums, and why the process workeduniversity of ballarat, university of ballarat act, david james, scholarships, campus plan, university plan

Pittock collection: small transportable vice * vice painted black and red * no manufacturerer's marks * 180 mm H x 140 mm L x 50 mm W Item stired in Pittock coach builder's box, reference 13000.1.