Digital copy of photograph scanned from newspaper cutting, paper unknown. Photo depicts an Avro Anson Mk1 aircraft standing in front of Bellman Hanger facing toward the hanger. Doors of hanger partly open. Two personnel appear to be servicing starboard engine, a third person standing slightly apart from others. Photo taken at Nhill during WWII. The Avro Anson Mk1 was the only aircraft in constant use during the life of the RAAF base in Nhill during WWII. About thirty of these aircraft were stationed in Nhill during the most intensive part of training at Nhill.Taken at NhillDigital copy of photograph scanned from newspaper cutting, paper unknown. Photo depicts an Avro Anson Mk1 aircraft standing in front of Bellman Hanger facing toward the hanger. Doors of hanger partly open. Two personell appear to be servicing starboard engine, a third person standing slightly apart from others. Photo taken at Nhill during WWIINumber 32 on fuselage above wing in front of roundell. Number 332 at rear of fuselage.raaf, ww2, nhill, avro anson, aerodrome, bellman hanger, aircraft maintenance, n332

Murray Comrie Collection. Following the Armistice at the conclusion of the First World War, the residents of Tarnagulla, Newbridge, Arnold's Bridge (Arnold), Murphy's Creek and Woodstock gathered for a Peace Picnic celebration at Newbridge in July 1919. The traction engine of Calder Bros. was used to convey the Tarnagulla contingent to Newbridge on five wagons. A huge bonfire was lit at night. The picnic was declared an unqualified success, and the Tarnagulla participants returned to town at 7.30pm that evening.Monochrome photograph depicting children from Tarnagulla School on wagons pulled by Don Calder's steam traction engine, going to a Peace Celebration in 1919. Copy of an older original, Copy probably made in 1980s-90s. There were four wagons crammed with children, followed by a fifth wagon with the Tarnagulla Brass Band at full volume. The convoy travelled direct to Newbridge to the picnic ground, then home via Llanelly where they were cheered on by the Llanelly schoolchildren and residents. tarnagulla, war, military, ww1, first world war, peace, commemoration, community celebrations, school, children, calder, transport

Black and white photograph of a winding engine (Roberts & Son) at Monument Hill Mine. Winding gear, large drum with wire cable wound on, sitting on concrete base. Inscriptions: on back - lined paper, glued in centre 'Monument Hill Mine, Winding Engine, Roberts and Sons'.place, mining site, rope winding drum, mines and mining, equipment, mining equipment, bendigo, mines, mining, surface equipment

Handwritten notes describing the machinery at the Victoria Quartz Mine. Items mentioned are: Poppet Legs, Pithead Pulleys, Braces, Boilers, Winding Engines, Platform, Air Compressor, Boiler Feed Pump and a Feed-water Heater which was attached to the main exhaust pipe of the winding engines.document, gold, victoria quartz, victoria quartz, victoria quartz machinery, bendigo advertiser1/2/1897 & 4/9/1896 & 10/2/1897, roberts & sons, mr w foote, mr ennor

a. . Handdrawn copy of Snob's Hill Mines by Caleb Thomas (Long Section) 1885. Top drawing show mines and the distance between them. Lower drawing shows leases at a scale of 8 chains to 1 inch. Dams and sand heaps are included. The second page shows x-sections of the poppet legs and their heights. Shaft numbers are included. Two of the pulley diameters are also shown. b. Document headed Caleb Thomas cross sections 10.10.1884. South Catherine, engine east of shaft legs 44 ft high Ellenborough engine east of shaft, legs 40 feet Belmont and Saxby, engine and wheel west of shaft, legs 27 feet York and Durham, engine and wheel west of shaft legs 27 feet Snobs Hill , Old Williams, engine east of shaft legs 53 feet, L. Brace 21ft. 1884 Acadia Catherine engine west. Legs 44 feet, L.brace 11 ft.map, bendigo, goldfields, snob's hill, plan of snob's hill mines, caleb thomas, c reef united, catherine reef shaft, william's main, acadia, william's old main, gt northern, york & durham, snob's hill, belmont & saxby, ellenborough, st mungo, golden pyke, united c'holders, compy, snowdon & co, sth catherine coy, princess alice, saunders, williams & coy, acadia co, wearon & co, snob's hill, nelson trib, kneebone tribute, la belle co, york & durham, north st mungo, saxby & devonshire trib, n? trib, belmont co, durham c'land, kitti trib, sadowa trib, ran?eu co, nth devonshire co, lady barkly, devonshire reef trib, central devonshire co, j c macartney, catherine united

Refers to service of LAC Lance & Percy CoatesThis is a pocket sized booklet. It has a blue cardboard cover. It is fastened with two staples. THE PRINTING IS IN BLACK INK, IT HAS A RUBBER STAMP OF MCGILLS Agency, Melbourne. Inside it has 31 pages of aircraft silhouettes. Page 31 has drawings of a German paratrooper and his equipment.First page written in ink is LAC Coates. There are a few penciled entries with aircraft engine power.ww2, aircraft, paratrooper

Ford Customline, registration no. GKL 204, circa 1956Customline 1956. M.T.S. Engine # ASQ 4984. Sold 23.12.57 750 pounds. P. Wilsonpolice vehicles; motor transport branch; wireless patrol; ford customline car

Adolph Carl Auguste Ruhen was born in Germany in 1867. He married Mary Ann Cowling in Victoria in 1897 and they moved to Denmark, Western Australia in 1910. He died there 2/10/1943.Paper certificate awarded to Adolf Carl August Ruhen from Board of Examiners for Engine Drivers, certificate of Competency as Engine Driver Second Class 14th May 1896. Number of certificate 884, date of birth given 22nd January 1867, place of birth Hamburg Germany.document, certificate, ruhen

Black and White portrait of man seated and woman standing. James and Sarah (Prior) Rathgeber. c1900James + Sarah (nee Prior) Rathgeber Concongellaengine, industry, forrest, ww1

This photograph is of a train on the small rail bridge which crosses over the Burn Road Newmerella cutting. In 1912 work was underway to complete the Bairnsdale to Orbost section of the railway. This meant the end of river transport for the area. The railway was opened on April 10 1916 and closed in 1987. The letter written on the card is from Hilda Graham to her uncle.This item is associated with the history of the Orbost-Bairnsdale railway line and therefore reflects the role that the rail line played in the social and economic history of Orbost.A black / white postcard photograph showing a train engine crossing on a small rail bridge. On the back is a handwritten letter.Photo caption - "NEWMERELLA RAILWAY, ORBOST STANLEY VOGT"newmerella east-gippsland-railway

This is a photograph of the gravel pit at Newmerella, near Orbost. This pit was used during the construction of the Orbost to Bairnsdale Railway line.This item is associated with the history of the Orbost-Bairnsdale railway line and therefore reflects the role that the rail line played in the social and economic history of Orbost. The Bairnsdale-Orbost railway was opened in 1916 to serve the agricultural and timber industry. Because of the decline in traffic and heavy operating costs, the line was finally closed in August, 1987. A black / white photograph of a small steam engine with open freight wagons at a gravel pit. There are some men watching.

.1 Rimmed brass case for "shotgun" type aircraft engine starting system. .2 Plastic end cap..1 Base has "Cart Elec Eng Start MF 79/3 84 ME 7-79" .2 "Remove cap before loading EFM 79"machinery-engines, military history-raaf

Black and white photograph of a steam locomotive with coal tender engine number H220, in a timber frame under glass.photograph, train, steam train

Black and white photograph of diesel locomotive Edward Henty engine number 302, under glass in a timber frame.photograph, train, diesel

Black and white photo with mine engineer,Mick Amarto operating the mines engines at Central Deborah Mine, Bendigo.mining, business, central deborah gold mine

Slide. Bendigo Train in Town. The Engine is moved on rails in from the railway yards, between the Buckell & Jeffery buildings.slide, bendigo, bendigo train in town., bendigo train in town.

Slide. Bendigo Train in Town. 'R' Class 766 Engine, at rest in park near Bendigo Railway Station.slide, bendigo, bendigo train in town., bendigo train in town.

Metal toy train engine painted yellow and red with black coal scuttle at rear. (Despite inscription there is no Noddy)A Budgie toy/Noddy and his train.toys, general

Book of Pilot's Notes General. Promulgated by order of the Air Council. Contains notes on Aircraft , engines, and dealing with emergencies.

This model was found in the collection of Bay Steamers Maritime Museum. It is not knowt who created it but it is supposed that it was constructed to educate the many masters of the Wattle in the operation of a steam engine - a not so common mode of power these days. A Bay Steamers Maritime Museum examined the model in March 2012 and discovered that is was in poor repair. Using his existing knowledge, and with reference to some historic texts, he made some repairs and returned the model to working order. Here is his anaylsis of the situation as an excerpt from the Bay Steamers Maritime Museum newsletter Steamlines May 2012 "I was confronted with a model of a steam engine used years ago as a training aid for hopeful steam engineers. Already having a knowledge of steam operations, I considered a museum write-up for that model a ‘piece of cake’. However, on turning the model’s crankshaft, the valve timing seemed ‘out of kilter’ with the movement of the piston. Problem was that the two eccentrics on the crankshaft were not properly secured to it. Eventually I fastened the two eccentrics to the crankshaft where I felt that they should be and then realized that one of them had a chain-driven valve-timing device attached. This would be adjusted while an engine was running to achieve best performance and fuel economy whilst in operation by accurately controlling the period of time during which steam under pressure from the boiler would be admitted to the cylinder and give greater time for the steam to expand in the cylinder, move the piston and turn the crankshaft and thus, drive the attached apparatus. When the valves were correctly set up it was then possible to get the model to function properly.The model comprises a green section, which is the actual the model mounted on a brown painted board. There are two parts of the model, painted white representing the steam passages, and black representing the cast- iron portions of the cylinder-block casting, and of the main valve sliding between the cylinder a second sliding valve. Of the black portions, one slides back and forth being connected to a rod which is connected to an eccentric clamped to the crankshaft and is the nearer to the flywheel of two eccentrics. This eccentric is attached to the crankshaft at an angle of 90 degrees to the crank-pin attached to the flywheel. To operate the model simply turn the flywheel by means of the handle attached to its crank-pin. A second eccentric is also attached to the crankshaft, further away from the first eccentric, and it is adjusted to operate 90 degrees from the first eccentric (that is, 180 degrees from the crank-pin) A piston (painted silver) is located in a plastic cylinder and has a piston rod which passes through one end of the cylinder, (in actual practice a steam-proof gland seals the cylinder against loss of steam) terminating in a cross-head slide between four rails guiding it. From this cross-head, a connecting rod joins the piston-rod to the flywheel via the crank-pin attached to the flywheel which is part of the crankshaft. (In actual practice, a flywheel may not be used, particularly in a multi-cylinder engine.) The white portions of the model painted nearest to the cylinder represent the two steam ports cast into the main cylinder block, whilst one section painted in between those two represents the exhaust outlet (which may be connected to a condenser to conserve water, or to the open air). The main slide valve has three white-painted portions painted thereon. It has two white-painted marks representing the steam passages to the steam ports into the cylinder, and a third section in between the other two, being that part of the valve through which exhaust steam passes in line with the ports in the cylinder block. By rotating the flywheel, the operations of an engine will be observed as steam is admitted to the main valve via the gap between the two jaws of two moveable portions of a second sliding valve which is operated by the second eccentric attached to the crank-shaft. This eccentric is used to finely tune the valve timing of this model to obtain best running results of an engine. There are various methods used for reversing a steam engine. model compound steam engine, steam engine, model, crankshaft, valve, flywheel, wattle, engineer, eccentrics

Typed letter to Mr A Richardson from Hugh Sloane, Mount Clear, Ballarat, Vic. 3350 dated 30/5/68 thanking him for two letters and some information about the engines at the Red White & Blue Mine. He was interested to hear of such engines being installed at a gold mine and wished he could have seen them in operation. The description of the steam winding engine was most interesting and he was hoping the society could preserve some of the machinery.document, gold, red white & blue extended, red white & blue extended, letter to mr a richardson, hugh sloane, red white & blue mine, rustin & hornsby

A temporary saw-mill in the central Grampians.Photo shows a clearing containing a saw mill. There is a saw with traction engine to the right ands a bullock wagon containing a large log to the left. There is a man to the right working with the engine, four men among the wood in the centre and two men near the wagon on the left. A large wood stump is prominent in the foreground. timber industries, logging, sawmilling

Black and white photograph. Nell Gwynne Reefs; Mine winding engine. Walker and Coy. Dwellings in background. Machinery, winding drums, steel platform, lever, etc. Plant growing up between. Inscriptions: on back - in ballpoint pen 'Nell Gwynne Reef's Mine, winding engine, Walker & Co'.mining, surface equipment, nell gwynne, bendigo, mines and mining, mines, place, gold, surface equipment

9.7 x 12.4 negative of a man sitting on a scooter with a small train engine and a small engine? In front of him. He is in front of a brick building with a sign on the door. The sign reads - J. Kahland Wine Merchant. Negative contained in a white envelope with - 'Man? J Kahland Wine Merchant' on Door.german heritage society collection - negative of a man

This message concerned the P.S. Curlip's entry to the Snowy River Lakes Entrance. It was logged at 2:45 and received at 2:47.This item is associated with the P.S. Curlip and the Richardson family, early Orbost pioneers.A white paper telegram with blue print and details hand-written in black ink. It has been sent fro Orbost to "Allen Richardson Marlo". The handwritten message is difficult to decipher."You may enter - engine driver Curlip within two miles outside Entrance Snowy River."telegram-richardson-curlip communications-19th-century