Wood, cylindrical base, curved narrowing neck, sperical (approx) top; nail hammered diagionally through top.

Two slightly different wooden patterns for casting unknown item. (approx.) Rectangular piece of wood with a narrower piece affixed across top ( long side of rectangle); narrow piece has two curved 'wedges' attached (one loose).

It is unknown what this item was a pattern for.One flat piece of rectangular wood with a hole on the top - center and two nails, one at the top left corner, one at the bottom - RH corner. A second piece of wood is attached on top of the first; it is smaller in width and split exactly in two. There is a design cut out of second piece in shape of a pear. Bulbous part of design is centered around a hole in the first piece of wood. Three nails protrude from the second piece of wood. Three nails in the second piece of wood are located; one in each section of the more bulbous end of cut-out, & third on one section of the smaller end of cut-out. Hole on bottom of wood does not go all of the way through.

This is a pattern for the stove front for the oat kiln at the mill.Rectangular piece of wood, broken at one end with two full cutouts and part of third. One, and the part of another cut-out is high arches. Frame, missing in places, running along outer rim and along cut-outs. Two rows of nails run down between arches holding braces in palce on back.

Augers were used in processing the grain, however this wooden auger is possibly a pattern for a cast metal auger.A long piece of hexagonal wood with a descending spiral of square wooden blades. On the top it has a circular piece of wood

Used to make cast for the metal ring gear for the water wheel which powered the Mill.Slightly arched wooden pattern with wooden ridges along the edge. Three square metal plates with a hole in the centre, bolted on with four bolts. Ten pentagin pieces of wood attached to the face.

Used as pattern to cast crown wheel of drive on water wheel. Actual drive has since been sold, only mold remainsCircular wooden pattern, raised centre circular area surrounded by four wide, flat spokes at regular intervals (the interim spaces being cut out with rounded corners) which are in turn surrounded by a rim which tapers back from the centre of the piece and has fixed to it regularly interleaved slats. Slats of protruding oblongs tapered from attachment to top and also central end to outer point. Light coloured wood 1 & 2 are Broken off pieces of back.

Probably used to drive machinery as part of milling process.From left to right along long centre pole (horizontal) is a small wide wheel, on a narrow arched stand.At the centre of the pole is a larger, slimmer wheel followed by a smaller wheel.

This stencil was used on bags and possibly other packaging containing grain processed and packed at Anderson's Mill. The stencil would have indicated the destination of, or origin of the grain.Rectangular copper stencil plate, ribbed edging; Anderson's Mill trademark (circular saw) in centre; some lettering is difficult to read due to corrosion / breaking of this section; some green surface corrosion; red paint around central trademark saw and lettering."FLAKE / ANDERSON'S / OAT MEAL / SMEATON"

This stencil was used on bags and possibly other packaging containing grain processed and packed at Anderson's Mill. The stencil would have indicated the destination of, or origin of the grain.Rounded trapezoidal shape, metal, letters stamped out. Hole bottom RH corner."A PAT / KINGSTON"

This stencil was used on bags and possibly other packaging containing grain processed and packed at Anderson's Mill. The stencil would have indicated the destination of, or origin of the grain.(approx) Rectangular metal stencil for oat or flour bag; rectangular section has been cut away from top LH corner, triangular section has been cut away from top RH corner; significant surface rusting; one letter of the stencil marking (letter R) has been covered over with a rectangular metal piece soldered onto stencil surface."SGC (R) / PORT SWETTENHAM"

This stencil was used on bags and possibly other packaging containing grain processed and packed at Anderson's Mill. The stencil would have indicated the destination of, or origin of the grain.Metal stencil (steel), rusty rectangular shape, corners cut off. Lettering surrounded with blue paint. Square hole top RH corner."BMTC / PENANG"

This stencil was used on bags and possibly other packaging containing grain processed and packed at Anderson's Mill. The stencil would have indicated the destination of, or origin of the grain.Rectangular, brown, vinyl type material. Lettering: Andersons (blue) Cow Meal (red) Made by D. Anderson & Co Millers, Smeaton Vic, 100lbs, when Pac" (all blue) Some lettering broken bottom right."ANDERSONS / COW MEAL / MADE BY / D. ANDERSON & CO / MILLERS / SMEATON VIC / 100 LBS / WHEN PAC"

This stencil was used on bags and possibly other packaging containing grain processed and packed at Anderson's Mill. The stencil would have indicated the destination of, or origin of the grain. Paint applied to stencil in the 1980;s for use on an interpretation display board.Rectangular, galvanised iron stencil for oat bag; small section cut away from each corner; bottom R corner cut-out and replaced with new stencil (Lettering 'Horses'), soldered on from behind main sheet. GLEN DEVON lettering surrounded by red paint, then later with blue paint.; red paint around other lettering (feed oats for racehorses)"GLEN DEVON / FEED OATS / FOR / RACE HORSES"

This stencil was used on bags and possibly other packaging containing grain processed and packed at Anderson's Mill. The stencil would have indicated the destination of, or origin of the grain.Rectangular; two pieces of iron welded together. Extensive rusting. Letters ANK 299 inside trapezoidal pattern. Kuala Lumpur cut out along bottom of stencil."ANK 299 / KUALA LUMPUR"

Sifter, part of machine.Rectangular in shape, made from wood. Six large rectangular spaces covered with a finely perforated zinc sheet. Two smaller spaces are made with a third piece of wood dividing the bottom horizontally.

Attaches to a tap, used in the milling process. (some taps are still intact in the mill building.)Long cylindrical metal hose which gets narrower near the tip. attached to a long canvass hose.

Appears to be a millstone that would have been used with another stone to grind wheat.Large circular stone wheel with ridges carved into its outer side. It has a hole through the middle with a metal fixture in it.

This stencil was used on bags and possibly other packaging containing grain processed and packed at Anderson's Mill. The stencil would have indicated the destination of, or origin of the grain.Large stencil, metal (tin?). 3 corners of stencil chipped off at angle. Large piece of corner missing from top left.Cut out of stencil depicts cockerel & the words "SUNVALLEY FLAKED WHEATMEAL"

This is a bag trolley that was used to transport large bags of grain or other items at the mill.Wooden frame of trolley, with vertical handles with three stabilising cross bars. Base of trolley has a curved metal part. This mounted on two small metal wheels.

Used to drive the belt for machines.A long shaft with five wheels of varying height attached to it. The largest wheel has six spokes, the second to last in size has five curved spokes. One wheel is made of hard rubber. The shaft extends beyond the largest wheel, where it has a big bolt. The shaft extends an inch or two beyond the wheel at the other end. All wheels are bolted on.

Telephones x 3 (GILS 0001, 0038, 0070; attached fixtures) There are three, black Bakelite, wall mounted, crank handle telephones across the lightstation; one in the former assistant keeper’s quarters, and two in the former head keeper’s quarters. The phone has instructions for its use on the crank dial. Two have acoiled handset cord, which dates the phone to just after 1949 when these came into use. The third has a smooth cord and must pre date 1949 (GILS 0070). Another much older wallmounted phone remains in the lighthouse (GILS 0041; attached fixture; see above 6.1). The four telephones at Gabo Island formed an intercom system that facilitated communication between the lighthouse and lightstation buildings. They demonstrate the necessity for employing various methods of communication in a remotely located lighthouse as well as communication between the lightstation buildings. Telephones of the same wall mounted, crank dial type remain at Cape Otway and Point Hicks As fixtures, the telephones belong to the building fabric and are included in the existing listing of the Gabo Island Lightstation in the Victorian Heritage Register (H1773). These intact items of equipment have first level contributory significance for their historic value and provenance.Black bakelite telephone, wall mounted with reciever/ handset on spiral cord attached to the body of the phone. There is a crank handle attached to the front of the telephone.On dial under crank handle. Outer perimeter of circular LABEL,"TO CALL:-TURN HANDLE & LIFT HANDSET / WHEN FINISHED PEPLACE HANDSET & TURN HANDLE"

Government issue desk. Manufactured (perhaps 1970s)It has second level contributory significance as a furnishing that has remained at the lightstation to demonstrate its more recent working operations.Wooden desk with metal frame. Dark grey vinyl top, three drawers on left-hand sde with metal handles. Second drawer has filing inserts.Right-hand front leg on black sticker. "C. of A. / D.O.T. 147110"

Cupboard is original to Lighthouse. This nineteenth century cedar furnishing has two doors and one internal shelf. It remains in the lighthouse although its original location was probably the lantern room, where similar surviving cabinets are more typically found. It was purpose built for the lighthouse with a curved back to fit the proportions of the tower interior with the wood reputed to have originated from a partition in the assistant lightkeepers’ houses, and the cupboard doors possibly crafted at a different time. Curved cabinets similar to this example can be found at three other early lighthouses investigated by this study. It is possible that these specially designed cabinets were included in the standard complement of furnishings provided to the colony’s lightstations by the Victorian Public Works Department. Other similar cabinets with curved backs remain in the Point Hicks Lighthouse and at Cape Nelson (two examples )and Cape Schanck, which has a curved front as well as back .The Gabo Island cabinet has first level contributory significance for its historic value, uniqueness, provenance to the lightstation and clear association with the functions of the lighthouse lantern room.Two door wooden (cedar) cabinet. One internal shelf, panelled, curved back. Doors are attached. Frame has been stripped, doors are unpainted.

Lightstations Flying Doctor first aid kit. Medical first aid box kept at Lightstation. According to a Lighthouse keeper each item was numbered to ensure correct administration of medications by Lightstation staff via radio contact with The Flying Doctor Service. The lightstation’s first aid case is a red painted metal box. The hinged lid is stencilled with white words of caution such as ‘handle with care and ‘this side up’. Inside are four tray inserts of different sizes. Until recent years the contents of the kit, including medications and an instruction book, were intact but have since been lost and cannot be located. Of the six lightstations investigated by this assessment project, it would seem that the case, which possibly dates to the early 1900s, is unique in its survival at Gabo Island. The cabinet has first level contributory significance for its historic value and provenance to the lightstation.The cabinet has first level contributory significance for its historic value and provenance to the lightstation.Red painted metal box with hinged lid. It has side handles with four removable, red painted metal tray inserts of varying sizes. Inscriptions stencilled in white on lid. Trays have letters stencilled in white on three sides. There are three latches to secure lid. Lock on central latch.Main chest stencilled in white , on top: "NO 3 / LIGHTHOUSE / ROYAL FLYINNG DOCTOR/ MEDICATIONS/HANDLE WITH CARE / THIS SIDE UP" •Four tray inserts, stencilled in white: "A", "B", "C", "D".

This table was found in the shed and restored in the 1990's by lightstation staff. The late nineteenth century cedar table has turned legs, a front drawer with brass knob pull (this may not be original). The wood has lost its original finish. Despite this, it has first level contributory significance for its historic value as an original furnishing that has remained at the lightstation since the nineteenth century.It has first level contributory significance for its historic value as an original furnishing that has remained at the lightstation since the nineteenth century.Australian cedar table with turned legs and front drawer with brass keyhole and wooden knob. Unpainted.

Commonwealth government issue. This nest of tables are currently in use by the lighthouse staff.The set of three tables of descending size are designed in the same distinctive style as the bookcases and share the same wood type and finish (GILS 0012.2). Information on the underside of the tables indicates they were purchased by the Commonwealth through the Department of Transport for the CLS. The design bears the stylistic marks of the easily recognisable furnishings produced by the Kalmar firm, Sydney. Steven Kalmar (1909-1989), who migrated to Australia in 1939 and opened his own interiors business in 1949, played a significant role in popularising modernist design concepts in Australia drawing his ideas from Scandinavian and American trends. Born in Hungary, he trained as an architect and his contemporary affordable furnishings were especially suitable for the open-plan houses built in Australia’s new post-war suburbs. He closed the retail side of this in 1957 and concentrated on commissions, some for large-scale orders. One of these bulk orders came from the Commonwealth Government sometime between 1957 and the early 1970s, with several examples of light, compact and functional domestic furnishings supplied to lightstations in Victoria. Because the order was placed by the CLS, it is possible that Kalmar furnishings were also provided to lightstations in other states. Additional examples at Gabo Island include three bedside tables (GILS 0042.2 & 0076.10), chest of drawers (GILS 0077) and two bookcases (GILS 0012.2), with the backs of at least two of the furnishings bearing the Kalmar label. Kalmar furnishings in the other Victorian lightstations investigated by this study include bookcases at Cape Otway, Cape Nelson (3 examples) and Point Hicks (2 examples); two bedside tables at Cape Otway, and a long coffee table at Wilsons Promontory. The set of tables has first level contributory significance for their clear provenance, completeness and association with Steven Kalmar whose functional designs introduced modern, low cost furnishings to a number of Australia’s lightstations.Nest of three Scandinavian style tables, solid wood. Curved U shaped legs, one bar at base of table.Underside of GILS007.3:"C of A / D.O.T 1444248" (Commonwealth of Australia, Department of Transport.) •All tables have "16" on underside.

This device was used to measure surface wind speed and direction. This anemometer was located on a concrete pad outside room 2.15 on a steel pole. The pole was considered unsafe and the anemometer was relocated to it's current position. When lowering the pole it fell over and was badly damaged. The Bureau of Meteorology donated it to the museum. It was then repaired and restored. The central pole on which it is mounted is galvanised iron pipe painted black. The anemometer, a portable device that manually measures wind speed, was a necessary instrument once common to all weather stations. The arms are attached to a vertical rod and as the wind blows, the cups rotate, making the rod spin. The stronger the wind blows, the faster the rod spins. The anemometer counts the number of rotations, or turns, which is used to calculate wind speed, surface wind and direction. They were designed to be durable to withstand the corrosive environment and strong winds expected at coastal sites such as those at Gabo Island. Anemometers existed in the nineteenth century and their design was improved by various experts including John Robinson in 1846, John Patterson in 1926, Brevoort and Joiner in 1935 and Derek Watson in 1991 who added wind direction measurement to its functions. This example was made for the Bureau of Meteorology by the Melbourne instrument company, Synchrotac, which became registered and incorporated on 26 July 1966. It is now displayed inside the building. A good example of its kind, the anemometer has first level contributory significance for its historic value and provenance to the lightstation.Anemometer and tripod stand. Three cupped brass discs on rotating arms fixed to turned brass cylinder shaped shaft. Beneath discs is a lead directional wind arrow attached to a rotating arm. A wooden three legged stand with central supporting pole of black painted hardwood and attached to a white painted marine ply circular base.Under wind cups: " SYNCHROTAC / MELB. / ser.no.70/372 / MADE IN AUSTRALIA." Above wind direction arrow: "C.OF.APT..../ SYNCHROTAC / MELB ? MADE IN AUSTRALIA / ser.no.70/372"

Modern communications technology arrived on Gabo Island with the construction of the telegraph line from Eden to Gabo Island in 1870. This type of insulator was usually used with radio antennae wires, telegraph and radio antennae equipment. The items of telegraphic equipment comprise a number of ceramic and glass insulators of varying age and type. Five, knuckle-shaped white glazed ceramic examples are associated with radio antennae wires. In addition to insulators, there is a telephone insulator bracket made of metal with wooden pins. It was once attached to the top of a steel pole and some of these remain in situ along the former telegraph line. Telegraphic communication commenced at the Gabo Lightstation in 1870, just eight years after the lightstation opened. The line from Sydney reached Eden, NSW by 1868 and was then extended to Gabo with the costs shared equally by NSW and Victoria. It was initially carried on posts across the sea to the island but was changed to a line along the seabed after the posts were washed away. The first telegraph office was a timber building on east side of the assistants’ quarters. In 1887 a new concrete telegraph office was built which included quarters for the operator, with Victoria and NSW sharing the construction costs. The 1992 CMP identified remnants of the line from its various phases of operation, and these can still be seen in 2016. Other ceramic insulators in the collection are associated with lines supported on utility poles for the transmission of high voltage electricity. .The various insulators have second level significance for their historic value and provenanceFive white glazed ceramic insulators. Knuckle bone sized, oval shaped with one opening at either end. All five are the same.