Showing 1457 items
matching throat
-
Upper Yarra Museum
Razor, Cut throat
Sharped Edged instrument used for cleaning hair from the skin. http://en.wikipedia.org/wiki/Straight_razor A straight razor is a razor with a blade that can fold into its handle.[1] They are also called open razors and cut-throat razors. HISTORY The first modern straight razor complete with decorated handles and hollow ground blades was constructed in Sheffield, England, by Benjamin Huntsman in 1740. Huntsman's process was adopted by the French sometime later. The English manufacturers were even more reluctant than the French to adopt the process and only did so after they saw its success in France.[5] Straight razors were the most common form of shaving before the 20th century and remained that common in many countries until the 1950s. TODAY Straight razors are still manufactured. DOVO, of Solingen, Germany, and Thiers Issard of France are two of the most well-known European manufacturers. Feather Safety Razor Co. Ltd. of Osaka, Japan makes a razor with the same form as a traditional straight, but featuring a disposable blade that can be installed through an injector-type system. Modern straight razor users are known to favor them for a variety of reasons. Some are attracted to the nostalgia of using old and traditional methods of shaving. It is a masculine ritual comparable to pipe smoking. Others profess an interest in reducing the waste of disposable blades.[11][22] Still others agree that straight razors provide a superior shave through a larger blade and greater control of the blade including the blade angle. Straight razors cover a much greater area per shaving stroke because their cutting edge is much longer than any of the multiblade razors. Ivory cut throat razor, with cream case 00121.3.Known as a straight razor.Razor with square point, full hollow ground 5/8” blade and double transverse stabiliser. The centre pin adds stability and rigidity to the handle---I think this is it ROM Parts The narrow end of the blade pivots on a pin, between 2 pieces of ivory forms the handle. LONG EXTRACT FROM WIKI _ SHORTEN to describe 00121 The parts of a straight razor and their function are described as follows: The narrow end of the blade rotates on a pin called the pivot, between two protective pieces called the scales or handle. The upward curved metal end of the narrow part of the blade beyond the pivot is called the tang and acts as a lever to help raise the blade from the handle. One or two fingers resting on the tang also help stabilize the blade while shaving. The narrow support piece between the tang and the main blade is called the shank, but this reference is often avoided because it can be confusing. The shank sometimes features decorations and the stamp of the country of origin. The top side and the underside of the shank can sometimes exhibit indentations known as fluting, or jimps for a more secure grip.[8] The curved lower part of the main blade from the shank to the cutting edge is called the shoulder.[9] The point where the shoulder joins the cutting edge is called the heel. A thick strip of metal running transversely at the junction where the main blade attaches to the shank is called the stabiliser. The stabiliser can be double,[10] single or can be absent in some razor models. The first stabiliser is usually very narrow and thicker and runs at the shank to blade junction, covering the shank and just spilling over to the shoulder. The second stabiliser can be distinguished since it is considerably wider and narrower, appearing after the first stabiliser and running lower into the shoulder. The non-cutting top of the blade is called the back or the spine while the cutting part of the blade opposite the back is called the cutting edge.[11] Finally the other free end of the blade, at the opposite end of the tang, is called the point and, sometimes, the head or the nose.[9][12] There are two to three pins in any handle. The middle pin, if present, is plastic coated and is called the plug.[13] Its function is to stabilise the sides of the handle so that they cannot be squeezed in the middle. When folded into the scales, the blade is protected from accidental damage, and the user is protected from accidental injury. During folding, the back of the blade, being thick and normally with a curved cross-section, acts as a natural stopper and prevents further rotation of the blade out of the handle from the other side shaving, lever, handle, blade, pivot, razor, tang -
Bendigo Historical Society Inc.
Clothing - MCGOWAN COLLECTION: CHILD'S JACKET, Late 19th Century
Clothing, cream coloured silk child's jacket. Part of a two piece suit. (see 11401.8 pants).Front opening with 4 X 1.6 cm and 1 X 14 cm white buttons from throat to waist. Chelsea collar at the front with sailor collar at the back. Long sleeves with 6 cm cuffs. Jacket has casing at lower hem with a drawstring of cotton tape. Single pocket on left breast. Jacket is fully lined with white cotton fabric. Old box 524.costume, children's, jacket -
Tennis Australia
Racquet, Circa 1930
A wooden racquet with a split open throat, and long handle. The base of the head on both sides features decal inscription: SPEEDWOOD. The short stem on the obverse features a decal of a crowned garter with the inscription: E. KENT. Company logo also features on red cloth butt cover, impressed in gold.The inscription DUCO PERMANENT/HIGH POLISH FINISH, feature across right side of stem. Patent information across left side of stem. Materials: Wood, Glue, Lacquer, Metal, Gut, Ink, Leather, Cloth, Stringtennis -
Tennis Australia
Racquet, Circa 1945
A Slazenger P.M.instructional racquet, with blue and white decoration. Decal on throat on obverse features a blue 'S' on a gold disc, with 'SLAZENGERS' below. Inscription at base of stem on obverse: P.M. Insstructions feature on base of racquet head, on both sides, and along right side of handle. Inscription along left side: SPECIALLY MADE BY SLAZENGER IN CONSULTATION WITH WORLD CHAMPION/FRED PER[RY A]ND L.T.A. TRAINING MANAGER DAN MASKELL. Materials: Wood, Nylon, Paint, Ribbon, Leather, Adhesive tape, Ink, Guttennis -
Tennis Australia
Racquet, Circa 1972
A Chemold Rod Laver Tournament tennis racquet, with ribbon whipping around shoulders, and leather grip with triangular perforations. Chemold logo features across base of head, flanked by ornamental motifs. A head and neck photo decal of Laver features on throat, with model name, and continuing along shaft. Gold, black and white Chemold trademark features on lower shaft. Plain white plastic butt cap. Materials: Wood, Nylon, String, Ribbon, Paint, Ink, Plastic, Leather, Rubber, Glue, Lacquer, Metal, Adhesive tapetennis -
Tennis Australia
Racquet, Circa 1972
A Chemold Rod Laver Professional Model tennis racquet, with ribbon whipping around shoulders and shaft, and leather grip with floral perforations. Model name features across base of head and throat, accompanied by an 8-pointed star device. Chemold logo features along shaft. Gold, black and white Chemold trademark features on lower shaft. Plain white plastic butt cap. Materials: Wood, Nylon, String, Ribbon, Paint, Ink, Plastic, Leather, Rubber, Glue, Lacquer, Metal, Adhesive tapetennis -
Tennis Australia
Racquet, Circa 1972
A Chemold Margaret Court Tournament tennis racquet, with ribbon whipping around shoulders, and leather grip with X-formation perforations. Chemold logo features across base of head, flanked by ornamental motifs. A head and neck illustrated decal of Court features on throat, with model name, and continuing along shaft. Gold, black and white Chemold trademark features on lower shaft. Plain white plastic butt cap. Materials: Wood, Nylon, Ribbon, Paint, Ink, Plastic, Leather, Rubber, Glue, Lacquer, Metal, Adhesive tapetennis -
Tennis Australia
Racquet, Circa 1972
A Chemold Margaret Court Tournament tennis racquet, with ribbon whipping around shoulders, and leather grip with X-formation perforations. Chemold logo features across base of head, flanked by ornamental motifs. A head and neck illustrated decal of Court features on throat, with model name, and continuing along shaft. Gold, black and white Chemold trademark features on lower shaft. Plain white plastic butt cap. Materials: Wood, Nylon, Ribbon, Paint, Ink, Plastic, Leather, Rubber, Glue, Lacquer, Metal, Adhesive tapetennis -
Tennis Australia
Racquet, Circa 1972
A Rawlings, John Newcombe Flash Junior tennis racquet, with plastic whipping around shoulders, and leather handle grip with quatrefoil perforations. Rawlings logo features across base of head. Model name features across throat and along shaft. Rawlings red, black and white 'R' trademark features on lower shaft, and black 'R' on butt cover. Shaft also features autograph by Newcombe. Materials: Wood, Nylon, Ink, Glue, Lacquer, Metal, Plastic, Adhesive tape, Paint, Leather, Rubbertennis -
Tennis Australia
Racquet, Circa 1974
A Rawlings, John Newcombe Signature tennis racquet, with ribbon whipping around shoulders, and mottled leather handle grip. Rawlings logo features across base of head. Model name features across throat. Inscription: LAMINATED CONSTRUCTION features along shaft. Black Rawlings 'R' trademark features on lower shaft. Red, white and black 'R' trademark features in sunken butt cap. Materials: Wood, Nylon, Ink, Glue, Lacquer, Metal, Ribbon, Adhesive tape, Paint, Leather, Plastic, Bambootennis -
Tennis Australia
Racquet, Circa 1975
A Seamco Ken Rosewall tennis racquet, with plastic ribbon whipping around shoulders, and, leather handle grip with patterned perforations. Model name features across base of head. Colour head and neck photo decal of Rosewall features on throat. Seamco logo features along the shaft. Seamco trademark symbol features on lower shaft and plastic butt cap. Rosewall autograph features along shaft, on obverse. Materials: Wood, Nylon, Leather, Plastic, Ink, Adhesive tape, Glue, Lacquer, Metaltennis -
Tennis Australia
Racquet, Circa 1975
A Davis Hi-Point tennis racquet, with ribbon whipping around shoulders, and leather handle grip with patterned perforations. Davis logo and model name features across base of head and throat. TAD "Kings of the Court" trademark features on lower shaft on reverse. Davis coat-of-arms "Duce virtute comite fortuna" trademark features on lower shaft on obverse. TAD trademark features on rubber butt cap. Materials: Wood, Nylon, Ink, Glue, Lacquer, Metal, Ribbon, Leather, Adhesive tape, Rubbertennis -
Tennis Australia
Racquet, Circa 1975
A Davis Hi-Point tennis racquet, with ribbon whipping around shoulders, and leather handle grip with patterned perforations. Davis logo and model name features across base of head and throat. TAD "Kings of the Court" trademark features on lower shaft on obverse. Davis coat-of-arms "Duce virtute comite fortuna" trademark features on lower shaft on reverse. TAD trademark features on rubber butt cap. Materials: Wood, Nylon, Ink, Glue, Lacquer, Metal, Ribbon, Leather, Adhesive tape, Rubbertennis -
Tennis Australia
Racquet, Circa 1975
An unstrung Davis Hi-Point tennis racquet, with ribbon whipping around shoulders, and leather handle grip with patterned perforations. Davis logo and model name features across base of head and throat. TAD "Kings of the Court" trademark features on lower shaft on obverse. Davis coat-of-arms "Duce virtute comite fortuna" trademark features on lower shaft on reverse. TAD trademark features on rubber butt cap. Materials: Wood, Ink, Glue, Lacquer, Metal, Ribbon, Leather, Adhesive tape, Rubbertennis -
Tennis Australia
Racquet, Circa 1968
A Dunlop, Frank Froehling Autograph tennis racquet, with ribbon whipping around shoulders and shaft, and leather handle grip with X-formation perforations. Dunlop logo features across base of head. Head and neck photo decal image of Froehling features on throat. Model name, and dynamic 'D' in arrowhead device, feature along the shaft. Dynamic 'D' trademark in arrowhead device features on plastic butt cover. Materials: Wood, Nylon, Plastic, Ink, Leather, Glue, Lacquer, Metal, Enamel, Adhesive tape, Fibreglass, Ribbontennis -
Tennis Australia
Racquet, Circa 1963
A Dunlop, Rod Laver, Grand Slam Winner tennis racquet, with string whipping around shoulders, and leather handle grip with linked diamond perforations. Model name features across base of head and along shaft. Head and neck photo decal image of Laver features on throat. Dunlop logo in red arrowhead features across base of the shaft. Dynamic 'D' trademark features on plastic butt cover. Materials: Wood, Nylon, Plastic, Ink, Leather, Glue, Lacquer, Metal, Enamel, Adhesive tape, Stringtennis -
Tennis Australia
Racquet, Circa 1968
A Dunlop, Marty Riessen Autograph tennis racquet, with ribbon whipping around shoulders and shaft, and leather handle grip with linear formation perforations. Dunlop logo features across base of head. Head and neck photo decal image of Riessen features on throat. Model name, and 'D' in arrowhead device, feature along the shaft. 'D' trademark in arrowhead device also features on plastic butt cover. Materials: Wood, Nylon, Plastic, Ink, Leather, Glue, Lacquer, Metal, Enamel, Adhesive tape, Fibreglass, Ribbon, Painttennis -
Tennis Australia
Racquet, Circa 1973
A Dunlop, Marty Riessen tennis racquet, with string whipping around shoulders, white enamelling from shoulders to butt, and leather handle grip with X-formation perforations. Model name features across base of head. Head photo decal of Riessen features on throat. Dunlop logo, and 'D' in arrowhead device, feature along the shaft. 'D' trademark in arrowhead device also features on plastic butt cap. Materials: Wood, Nylon, Plastic, Ink, Leather, Glue, Lacquer, Metal, Enamel, Stringtennis -
Tennis Australia
Racquet, Circa 1973
A Dunlop, Evonne Goolagong tennis racquet, with string whipping around shoulders, white enamelling from shoulders to butt, and leather handle grip with cross-hatch pattern. Model name features across base of head. Head photo decal of Goolagong features on throat. Dunlop logo, and 'D' in arrowhead device, feature along the shaft. 'D' trademark in arrowhead device also features on plastic butt cap. Materials: Wood, Nylon, Plastic, Ink, Leather, Glue, Lacquer, Metal, Enamel, Stringtennis -
Tennis Australia
Racquet, Circa 1973
A Dunlop, Evonne Goolagong tennis racquet, with string whipping around shoulders, white enamelling from shoulders to butt, and leather handle grip with cross-hatch pattern. Model name features across base of head. Head photo decal of Goolagong features on throat. Dunlop logo, and 'D' in arrowhead device, feature along the shaft. 'D' trademark in arrowhead device also features on plastic butt cap. Materials: Wood, Nylon, Plastic, Ink, Leather, Glue, Lacquer, Metal, Enamel, String, Adhesive tapetennis -
Tennis Australia
Racquet, Circa 1973
A Dunlop, Evonne Goolagong tennis racquet, with string whipping around shoulders, white enamelling from shoulders to butt, and leather handle grip with cross-hatch pattern. Model name features across base of head. Head photo decal of Goolagong features on throat. Dunlop logo, and 'D' in arrowhead device, feature along the shaft. 'D' trademark in arrowhead device also features on plastic butt cap. Materials: Wood, Nylon, Plastic, Ink, Leather, Glue, Lacquer, Metal, Enamel, String, Adhesive tapetennis -
Tennis Australia
Racquet, 1981
A Dunlop, John McEnroe Pro tennis racquet, with ribbon whipping around shoulders. Dunlop logo features across base of head. Model name features across throat and along shaft. 'D' trademark in arrowhead device also features on lower shaft and plastic butt cap. Dunlop logo and trademark feature on left and right sides of shaft. Retailer sticker features on left side of shaft. Materials: Wood, Nylon, Plastic, Ink, Leather, Glue, Lacquer, Metal, Fibreglass, Ribbon, Adhesive tapetennis -
Tennis Australia
Racquet, 1978
An AMF Head Vilas, wood/graphite composite tennis racquet, with open throat design. Head logo features across base of racquet head. Model name features along shaft. AMF Head emblem and logo feature on top of handle, above grip. AMF Head logo features on plastic sticker over black butt cap. Registration number written along left side of shaft: W-189430. Materials: Wood, Graphite, Leather, Plastic, Nylon, Glue, Lacquer, Metal, Ink, Adhesive tapetennis -
Tennis Australia
Racquet, 1978
An AMF Head Vilas, wood/graphite composite tennis racquet, with open throat design. Head logo features across base of racquet head. Model name features along shaft. AMF Head emblem and logo feature on top of handle, above grip. AMF Head logo features on plastic sticker over black butt cap. Registration number written along left side of shaft: W-58305. Materials: Wood, Graphite, Leather, Plastic, Nylon, Glue, Lacquer, Metal, Ink, Adhesive tapetennis -
Tennis Australia
Racquet, Circa 1972
An Head 'Arthur Ashe Competition 2, Boron Flex' tennis racquet, with: wood/boron/plastic composite frame with open throat; grooved outer crown; plastic butt cap; and, brown leather handle grip over hard plastic shaft encasement. Manufacturer's name features across base of head, across top of shaft encasement, and across butt cap. Model name features along left side of shaft. Materials: Metal, Plastic, Wood, Nylon, Leather, Adhesive tape, Ink, Papertennis -
Tennis Australia
Racquet & cover, Circa 1975
Two part object. (1) A Dura-Fiber XR-Graphite tennis racquet, featuring IPC core, brown frame with open throat, handle grip wrapped in tan leather printed with manufacturer name. Plastic butt cap. Manufacturer's logo on shaft and butt cap. Plastic strips around head as anchor for strings. (2) Original vinyl head cover with zip, featuring manufacturer name and logo and model name. Materials: Wood, Metal, Fibre, Leather, Adhesive tape, Vinyl, Plastic, Inktennis -
Tennis Australia
Racquet, Circa 1935
A Wright & Ditson 'Les Stoefen' model tennis racquet. String whipping around shoulders. On both sides of racquet, model name and manufactuer name printed across throat. Image of endorser featured on shaft on obverse. Name of manufacturer features on shaft on reverse. Handle spiral-wrapped with leather hand grip and has leather end wrap held with tacks. Manufacturer name and country of origin printed on left side of shaft. Materials: Wood, Metal, Lacquer, Glue, Ink, Leather, Nylon, Paint, Stringtennis -
Tennis Australia
Racquet, Circa 1955
A Spalding Top-Flite model tennis racquet, featuring whipping around shoulders and shaft, and wood grain finish on shaft & bottom section of head. Has leather wrapped handle and plastic butt cap. Manufacturer name features across base of head. Model name features across throat. On shaft is printed: 'SYNCHRO-POWER SHAFT'. Wreathed 'S' symbole features on lower shaft and on butt cap. Materials: Wood, Metal, Lacquer, Glue, Leather, Vinyl, Ink, String, Plastic, Adhesive tape, Painttennis -
Tennis Australia
Racquet, Circa 1930
A Spalding 'W. T. Tilden' Cannon Ball model tennis racquet, featuring whipping around shoulders and shaft, an open throat, fine-grooved handle and leather end wrap & butt cloth. Model name features across base of head, on obverse. Manufacturer name features across base of head on reverse. Image of endorser appears on shaft on obverse, and decal signature appears on shaft on reverse. Manufactuer logo printed on butt cloth. Materials: Wood, Metal, Lacquer, Glue, Leather, Vinyl, Ink, Stringtennis -
Tennis Australia
Racquet & cover, Circa 1975
A Spalding 'La Vitesse' tennis racquet (.1), with: a split lower shaft; whipping around shoulders; fibre reinforced bow and head; leather handle grip; and, plastic butt cap. Model name features across lower right of head. Manufacturer's name features across throat, handle grip, and butt cap. Racquet is accompanied by a vinyl racquet head cover (.2), originally unrelated to it. Materials: Wood, Glue, Metal, Lacquer, Nylon, Leather, Ink, Plastic, Adhesive tape, Plastic, Fibre, Paint, Polyvinyl Chloridetennis