A transitional flat top tennis racquet with a convex throat. Inscription across throat on obverse: ECLIPSE/TRADE MARK/HORSMAN/N.Y. Across the top of the head is a partly illegible inscription, which may spell 'SPECIAL'. Across the length of the side of the stem is the inscription: ORIENTAL/GUT. Ornamentally latticed cuts into the handle around all sides act as the grip. Materials: Wood, Gut, Metal, Lacquer, Leather, Stringtennis

A wooden racquet with a convex throat, and altered handle. Inscription across throat on obverse: 1920/SPECIAL. Red and yellow Reach 'baseball' trademark features on throat on reverse. Manufacturing details feature across right side of stem: A.J. REACH/MAKERS. Trademark is also stamped onto butt cap. Materials: Wood, Gut, Metal, Lacquer, Glue, Ink, Paint, Leather, Cloth tape, Stringtennis

A wooden racquet with a split open throat, and long handle. The base of the head on the obverse features decal inscription: WOVEN-WOOD. The short stem on the reverse features a decal of a crowned garter with the inscription: E. KENT. Patent information across left side of stem. A hand poked, then inlaid inscription across the handle on obverse: CED. Materials: Wood, Glue, Lacquer, Metal, Gut, Ink, Leather, Cloth, Stringtennis

Voting registers, or electoral rolls, are a census of those who were eligible to vote. They are valuable because a country-wide census was not taken until 1911. Early electoral rolls give an individual name, residence, status of property occupation/ownership, and the rate value of the property. Electoral rolls are arranged by electoral district and subdistrict. Name, Address, Occupation and gender for thirteen subdivisions (Bendigo, Carisbrook, Castlemaine, Eaglehawk, Elmore, Golden Square, Heathcote, Maldon, Marong, Maryborough, Raywood, Sandhurst East & Strathfieldsaye). Electoral rolls were published by each state during election years..Electoral Roll for the Commonwealth Division of Bendigo, State Assembly District of Bendigo, and State Electoral Province of Bendigo for 1952 (made up to 8th September 1952). Includes Name, Address, Occupation and gender for thirteen subdivisions (Bendigo, Carisbrook, Castlemaine, Eaglehawk, Elmore, Golden Square, Heathcote, Maldon, Marong, Maryborough, Raywood, Sandhurst East & Strathfieldsaye). Assembled and bound with string, and a red light-card cover.Stamped on cover as owned by Harold Curnow, Accountant and Auditor, Colonial mutual Building, View Street, Bendigo.electoral rolls, voting in bendigo

A wooden racquet with a concave throat, blue plastic shoulder and stem supports, white whipping, and grooved handle. Inscription along the throat on obverse: CONQUEROR. Manufacturer's mark, featured on throat on reverse, comprises of the letter 'M' at the centre of a circular, banded shield. Inscription: N.J. MAGNAN CORP./NORTH ATTLEBORO,MASS,U.S.A. Materials: Wood, Gut, String, Leather, Cloth, Metal, Glue, Lacquer, Ink, Plastictennis

A Wilson Speed Flo racquet, with 'SUPER-FLEX SHAFT', red painted throat and shaft, black-painted shoulder undersides, perforated black leather grip, and white cloth butt cover with red-stitched 'W' trademark. Inscription: WILSON/SPEED FLO/SPEED FLEX/FIBRE FACE. Materials: Wood, Nylon, Glue, Lacquer, Metal, Leather, Adhesive tape, Paint, Ink, String, Cloth, Ribbontennis

A Wilson Famous Player Series, Don Budge Super Stroke tennis racquet. Shaft features a decal head and neck illustration of Budge. Base of head features Wilson logo in banner device behind 'W' trademark. Leather handle grip features four-leaf clover perforations. Materials: Wood, Nylon, Leather, Adhesive tape, Ink, Glue, Lacquer, Metal, Plastic, Paint, Stringtennis

A Rawlings, Brian Fairlie Signature tennis racquet, with string whipping on shoulders, and leather handle grip with quatrefoil perforations. Rawlings logo features across base of head. Model name features along the shaft. Cursive 'R' trademark features on lower shaft (along with 'Mark of a Pro' motto), and in sunken butt cap. Materials: Wood, Nylon, Ink, Glue, Lacquer, Metal, Plastic, Leather, Ribbon, Enameltennis

A Garcia International GT-77 tennis racquet, with string whipping around shoulders and shaft, and vinyl handle featuring X-formation perforations. Company logo features across base of head. Model name features along shaft. Garcia 'G' trademark features on lower shaft and plastic butt cap. Materials: Wood, Nylon, Vinyl, Plastic, Ink, Adhesive tape, Glue, Lacquer, Metal, Painttennis

A Spalding Woodstar, "Interclub" model tennis racquet with whipping on shoulders, leather hand grip and white plastic butt cap. Manufacturer's name features along shaft. 'S' symbol on butt cap; model name across base of head. Star symbol spray-painted across net. Materials: Wood, Metal, Lacquer, Glue, Ink, Nylon, Paint, Leather, Plastic, Adhesive tape, Stringtennis

A Wilson 'T2000' metal tennis racquet, with double shaft; yellow plastic shaft casing and silver whipping. Handle wrapped with grey non-original grip tape. Net anchored to metal wire wrapped around head frame. Yellow plastic butt cap with white label featuring 'W' logo in red. Materials: Metal, Plastic, Adhesive tape, Nylon, String, Adhesive label, Rubbertennis

A Wilson 'T2000' metal tennis racquet, with double shaft; cream plastic shaft casing and silver whipping. Handle wrapped with black leather (non-original, but Wilson-branded). Net anchored to metal wire wrapped around head frame. Yellow plastic butt cap with white label featuring 'W' logo in red. Materials: Metal, Plastic, Adhesive tape, Nylon, Leather, String, Adhesive labeltennis

A Slazenger 'Plus' metal tennis racquet, with double shaft, blue metal throat reinforcement; blue metal shaft casing; and a handle wrapped in black perforated Slazenger-branded leather. Manufacturer name & logo appear on white plastic butt cap and on throat reinforcement on reverse. Model name appears on shaft pillar and on throat reinforcement on obverse. Materials: Metal, Plastic, Leather, Adhesive label, Nylon, Stringtennis

A Spalding 'Model AH' tennis racquet, featuring: concave throat; bevelled crown; whipping over hide reinforced shoulders; and, fine-grooved, octagonal handle. 'A.G. Spalding & Bros. Made in U.S.A.' logo encircling ball trademark features on throat on reverse. Decal of model name features across throat on obverse. Materials: Wood, Lacquer, Glue, Metal, Ink, Gut, Leather, Paint, String, Hidetennis

A Spalding 'Model EH' tennis racquet, featuring: concave throat; bevelled crown; whipping over hide reinforced shoulders; and, fine-grooved, octagonal handle. 'A.G. Spalding & Bros. Made in U.S.A.' logo encircling ball trademark features on throat on reverse. Decal of model name features across throat on obverse. Materials: Wood, Lacquer, Glue, Metal, Ink, Leather, Paint, String, Hide, Guttennis

A Spalding Top-Flite model tennis racquet, featuring whipping around shoulders and shaft, an open throat, fine-grooved handle and leather end wrap & butt cloth. Model name features across base of head, on obverse. Manufacturer name features across base of head on reverse. Butt cloth is printed with manufacturer logo. Materials: Wood, Metal, Lacquer, Glue, Leather, Vinyl, Ink, Stringtennis

A Spalding Top-Flite model tennis racquet, featuring whipping around shoulders and shaft, an open throat, leather wrapped handle and leather end wrap & butt cloth. Plastic reinforcement around base of throat. Model name features across base of head, on obverse. Manufacturer name features across base of head on reverse. Materials: Wood, Metal, Lacquer, Glue, Leather, Vinyl, Ink, Stringtennis

A Spalding 'Tournament' model tennis racquet, featuring concave throat and fine-grooved wooden handle with leather end wrap and butt cloth . White reinforcement tape around shoulders. Manufacter logo features on throat on reverse. Model name features on throat on obverse. Manufacturer logo printed on butt cloth. Materials: Wood, Metal, Lacquer, Glue, Leather, Gut, Ink, String, Adhesive tapetennis

A Spalding 'Johnny Lamb' tennis racquet, with whipping around shoulders and shaft, and a plain leather handle grip. Model name features across throat on obverse; logo of the Valley Hunt Club features on throat on reverse. Latin American version of Spalding ball trademark features on shaft (i.e. MARCA REGISTRADA/SPALDING). Materials: Wood, Glue, Metal, Lacquer, Nylon, Leather, Ink, Paint, String, Ribbontennis

A Spalding 'Davis Cup' tennis racquet, with whipping around shoulders, fibre reinforced shoulders, leather handle grip with patterned perforations, and plastic butt cap. Model name features across base of head. Manufacturer's name features along shaft. Spalding 'S' trademark features on butt cap. Materials: Wood, Glue, Metal, Lacquer, Nylon, Leather, Ink, String, Adhesive tape, Plastic, Fibretennis

A Spalding 'Davis Cup' tennis racquet, with whipping around shoulders, fibre reinforced shoulders, leather handle grip with patterned perforations, and plastic butt cap. Model name features across base of head. Manufacturer's name features along shaft. Spalding 'S' trademark features on butt cap. Materials: Wood, Glue, Metal, Lacquer, Nylon, Leather, Ink, String, Adhesive tape, Plastic, Fibretennis

A Wright & Ditson 'Columbia' tennis racquet, with: bevelled crown; whipping around shoulders; and, mid-grooved handle. Model name features across throat on obverse. Manufacturer details feature along right side of shaft. Wright & Ditson Championship 'tennis player on ball' trademark features across throat on reverse, and on butt cover. Materials: Wood, Metal, Lacquer, Glue, Ink, Leather, Gut, String, Painttennis

A Wright & Ditson 'Davis Cup' tennis racquet with whipping around shoulders; and handle wrapped with leather perforated grip. Has leather end wrap and 'DM' printed on butt. Model & manufacturer's name anda trophy logo feature across throat on both obverse and reverse. On reverse and obverse of shaft is printed:WRIGHT & DITSON/CHAMPIONSHIP QUALITY. Materials: Wood, Metal, Lacquer, Glue, Ink, String, Gut, Leathertennis

A Wilson, Maureen Connolly Mercury tennis racquet. Base of head features model name. Throat features Wilson logo. Shaft features decal head and shoulders image of Connolly. Base of shaft and plastic butt cap feature 'W' trademark. Leather handle grip features quatrefoil perforations. Materials: Wood, Nylon, Leather, Ink, Glue, Lacquer, Metal, Paint, Ribbon, Plastic, Stringtennis

A Wilson, Maureen Connolly Autograph tennis racquet. Base of head features Wilson logo. Throat features model name, and decal illustration of a golden crown. Base of shaft and plastic butt cap feature 'W' trademark. Leather handle grip features patterned perforations. Materials: Wood, Nylon, Leather, Ink, Glue, Lacquer, Metal, Paint, Ribbon, Plastic, String, Adhesive tape, Hidetennis

A Regent, Ellen Renwal tennis racquet. Regent logo features across the base of the head. Model name, with a decal head and shoulders image of Renwal features on the throat. An ornate squiggle device, flanked by two stars, features along the shaft. Inscription along right side of shaft: ESPECIALLY DESIGNED/FOR WOMEN. Materials: Wood, Nylon, String, Glue, Lacquer, Metal, Ink, Paint, Leather, Ribbontennis

A Regent PTX-80 tennis racquet, with an open throat, and wood/fibreglass composite construction. Regent logo and model name feature along the throat. 'R' trademark features at base of shaft. Manufacturer's details feature on the right side of the shaft. Leather handle grip features triangular-patterned perforations. Materials: Wood, Nylon, Glue, Lacquer, Metal, Ink, Plastic, Adhesive tape, Leather, String, Fibreglasstennis

A Spalding metal tennis racquet, with double shaft, rounded head; metal throat bridges; black plastic shaft casing; and handle wrapped in black perforated leather. Black plastic butt cap has adhesive label featuring wreathed 'S' logo. Strip of brown leather used under throat as string buffer. Materials: Metal, Adhesive tape, Plastic, Leather, Adhesive label, Nylontennis

'Wink Tennis' game. Incomplete according to Instructions sheet: contains two 'winks-on-a-string', four plastic discs, a plastic 'net' and a playing board. Should contain two plastic side clips - one plastic clip present, one missing. Also contains an instructions pamphlet. Three non-original metal clips contained in box. Materials: Cardboard, Paper, Ink, Plastic, Glue, Metaltennis

Three ruled foolscap sheets, tied in the top left hand corner with string, headed Prahran Malvern Tramways - tape measurement of surface slopes from High Street, Glenferrie Road Wattle tree Road to Burke Road. Prepared by Mr Mainwaring in black and red ink. Dated 30.6.1910. Items 2041 to 2052 within box 72.3 in a brown folder marked "PMTT" in red pencil.trams, tramways, pmtt, malvern, surveys, high st, wattle tree rd, burke rd