Coloured photo of painting. Joshua Black - Head and shoulders. Black Jacket and tie. White shirt.Back: Holland's Picture Framing and Art Supplies. Hilary. 16 Henty St, Portland. Phone 03 55233582

Historically this item represents women's fashion in the 1920s to 1950s. As the material used in the construction is not of a high monetary value it can be assumed it was a day to day working woman apparel to keep the hat firmly fastened into the hair. It does indicate that fashion of the time was important within the regionThis item is a reflection of both the fashion mode of the 1920s to 1950s when long hair needed to be controlled by hair pins rather than later manufactured hair sprays. It is also an example of society's mores of tidiness and quasi religious beliefs of covering the hair and head when outdoors This item is similar as the one worn by the "Queen Mother" in the film "The Kings' Speech"Silver coloured pin with a thistle shaped head also in silver/chrome colour. Sleek in appearancemillinery, costume, pin hat accessories, female hair restrainer

Black and white photograph showing a copied illustration of the head of a man. Partial caption underneath image Murdered by the Kelly Gang (written in ink on rear)kelly gang, edward kelly, ned kelly, aaron sherritt, murders, joe byrne

These items are examples of hand-made nails / spikes used in earlier times.Four hand-made large rusty iron pegs. They are tapered to points and have flat heads.spikes trades blacksmithing

Vida Cooper's first teaching post was Ringwood East Primary School, Everard Road. Clippings included with Cooper Collection memorabilia donated by Annette Rattray - a distant relative.Newspaper clipping circa 1975 headed Goodbye Miss Cooper and 1942 clipping of cattleyard scene.1. Michelle Smith of grade 6 at Verdale Primary School, Mitcham, presents Miss Cooper with a farewell gift - a copper electric kettle - on behalf of the students. 2. Wednesday, March 11, 1942 - Helping with the branding: Two city girls helping with the branding on Mr. John Roper's property, Mt. Yorke, Tawonga, via Wodonga.

WW1Photo,black and white-head and shoulders-WW1,uniform,-slouch,hat-rising,suns,on,collarsno, william, thompson, reg, 1136

The tintype (or ferrotype or Melainotype) was produced on metallic sheet (not, actually, tin) instead of glass. The plate was coated with collodion and sensitized just before use. It was introduced by Adolphe Alexandre Martin in 1853. The most common size was about the same as the carte-de-visite, 5.5cm x 9.0cm, but both larger and smaller ferrotypes were made. The smallest were "Little Gem" tintypes, about the size of a postage-stamp, made simultaneously on a single plate in a camera with 12 or 16 lenses. They were often produced by travelling photographers, and were cheaper than Ambrotypes so made photography available to working classes, not just to the more well-to-do. The print would come out laterally reversed (as one sees oneself in a mirror). Being quite rugged, tintypes could be sent by post. Tintypes were eventually superseded by gelatin emulsion dry plates in the 1880s, though street photographers in various parts of the world continued with this process until the 1950s. (Above information abridged from http://www.rleggat.com/photohistory/history/tintype.htm) The firm of Gove and Allen opened in Sydney in 1880 and were responsible for the belated popularizing of the gem tintype in Australia. The firm traded as both The American Gem Studio and The American Studio. Others franchises were opened in Melbourne, Ballarat and Sandhurst (Bendigo). The Sandhurst branch closed in 1882 and Adelaide in 1884. All Gove and Allen studios had ceased trading by 1885. The studio addresses were: 23 King William St, Adelaide; 324 George St, Sydney; 95 Swanston St, Melbourne; Howard Place, Sandhurst; 7 Queen St, Brisbane; The card mounts used in Gove and Allen studios in Australia are identical to those used in America. They were initially made of plain white card with embossing around the oval image opening in the mount while some also had simple geometric and floral printed designs as well. Although Gove and Allen studios produced the majority of gem tintypes in Australia, other studios offered them including: - London, American & Sydney Photo Company, 328 George St, Sydney; - David Edelsten, 55 & 57 Bourke St, Melbourne; - Burman's Portrait Rooms, St. George's Hall, 209 Bourke St, Melbourne; - Bell's Gem Portrait Studio, 57 Bourke St East, Melbourne; - R. H. Kenny, Bridge St, 6 Sturt St Ballarat; - Marinus W. Bent, Sandhurst (Bendigo); - George Fisher, Victoria; - Anson Brothers, Hobart Town. (Abridged information from http://members.ozemail.com.au/~msafier/photos/tintypes.html) .8)A tintype portrait of a man's head, attached to a card. The cheeks have been hand coloured.little gem

The tintype (or ferrotype or Melainotype) was produced on metallic sheet (not, actually, tin) instead of glass. The plate was coated with collodion and sensitized just before use. It was introduced by Adolphe Alexandre Martin in 1853. The most common size was about the same as the carte-de-visite, 5.5cm x 9.0cm, but both larger and smaller ferrotypes were made. The smallest were "Little Gem" tintypes, about the size of a postage-stamp, made simultaneously on a single plate in a camera with 12 or 16 lenses. They were often produced by travelling photographers, and were cheaper than Ambrotypes so made photography available to working classes, not just to the more well-to-do. The print would come out laterally reversed (as one sees oneself in a mirror). Being quite rugged, tintypes could be sent by post. Tintypes were eventually superseded by gelatin emulsion dry plates in the 1880s, though street photographers in various parts of the world continued with this process until the 1950s. (Above information abridged from http://www.rleggat.com/photohistory/history/tintype.htm) The firm of Gove and Allen opened in Sydney in 1880 and were responsible for the belated popularizing of the gem tintype in Australia. The firm traded as both The American Gem Studio and The American Studio. Others franchises were opened in Melbourne, Ballarat and Sandhurst (Bendigo). The Sandhurst branch closed in 1882 and Adelaide in 1884. All Gove and Allen studios had ceased trading by 1885. The studio addresses were: 23 King William St, Adelaide; 324 George St, Sydney; 95 Swanston St, Melbourne; Howard Place, Sandhurst; 7 Queen St, Brisbane; The card mounts used in Gove and Allen studios in Australia are identical to those used in America. They were initially made of plain white card with embossing around the oval image opening in the mount while some also had simple geometric and floral printed designs as well. Although Gove and Allen studios produced the majority of gem tintypes in Australia, other studios offered them including: - London, American & Sydney Photo Company, 328 George St, Sydney; - David Edelsten, 55 & 57 Bourke St, Melbourne; - Burman's Portrait Rooms, St. George's Hall, 209 Bourke St, Melbourne; - Bell's Gem Portrait Studio, 57 Bourke St East, Melbourne; - R. H. Kenny, Bridge St, 6 Sturt St Ballarat; - Marinus W. Bent, Sandhurst (Bendigo); - George Fisher, Victoria; - Anson Brothers, Hobart Town. (Abridged information from http://members.ozemail.com.au/~msafier/photos/tintypes.html) .9) A tintype portrait of a woman's head, attached to a card. The cheeks have been hand coloured.little gem, woman, unidentified woman, women, photography

The tintype (or ferrotype or Melainotype) was produced on metallic sheet (not, actually, tin) instead of glass. The plate was coated with collodion and sensitized just before use. It was introduced by Adolphe Alexandre Martin in 1853. The most common size was about the same as the carte-de-visite, 5.5cm x 9.0cm, but both larger and smaller ferrotypes were made. The smallest were "Little Gem" tintypes, about the size of a postage-stamp, made simultaneously on a single plate in a camera with 12 or 16 lenses. They were often produced by travelling photographers, and were cheaper than Ambrotypes so made photography available to working classes, not just to the more well-to-do. The print would come out laterally reversed (as one sees oneself in a mirror). Being quite rugged, tintypes could be sent by post. Tintypes were eventually superseded by gelatin emulsion dry plates in the 1880s, though street photographers in various parts of the world continued with this process until the 1950s. (Above information abridged from http://www.rleggat.com/photohistory/history/tintype.htm) The firm of Gove and Allen opened in Sydney in 1880 and were responsible for the belated popularizing of the gem tintype in Australia. The firm traded as both The American Gem Studio and The American Studio. Others franchises were opened in Melbourne, Ballarat and Sandhurst (Bendigo). The Sandhurst branch closed in 1882 and Adelaide in 1884. All Gove and Allen studios had ceased trading by 1885. The studio addresses were: 23 King William St, Adelaide; 324 George St, Sydney; 95 Swanston St, Melbourne; Howard Place, Sandhurst; 7 Queen St, Brisbane; The card mounts used in Gove and Allen studios in Australia are identical to those used in America. They were initially made of plain white card with embossing around the oval image opening in the mount while some also had simple geometric and floral printed designs as well. Although Gove and Allen studios produced the majority of gem tintypes in Australia, other studios offered them including: - London, American & Sydney Photo Company, 328 George St, Sydney; - David Edelsten, 55 & 57 Bourke St, Melbourne; - Burman's Portrait Rooms, St. George's Hall, 209 Bourke St, Melbourne; - Bell's Gem Portrait Studio, 57 Bourke St East, Melbourne; - R. H. Kenny, Bridge St, 6 Sturt St Ballarat; - Marinus W. Bent, Sandhurst (Bendigo); - George Fisher, Victoria; - Anson Brothers, Hobart Town. (Abridged information from http://members.ozemail.com.au/~msafier/photos/tintypes.html) A tintype portrait of a woman's head and shoulders, attached to a card. The cheeks have been hand coloured.little gem, woman, unidentified woman, women, photography

W.H. Wooster was associated with the Ballarat Observatory. .1) Photograph of W.H. Wooster with the telescope at the Ballarat Observatory. .2) Head and shoulders of W.H. Woosterballarat observatory, observatory, wooster, w.h. wooster, portrait, mount pleasant

Arthur Nicholson former member of the Ballarat School of Mines Council for many years, Councillor of the City of Ballarat (mayor several time), Master Builder, Chairman of the Ballarat Water Commission, and much else.Head and shoulders of a balding man with grey hair wearing a suit and tie. He is Arthur Nicholson. portrait, ballarat school of mines, arthur nicholson, city of ballarat, ballarat water commission

Brace metal with "spoford" or split chuck operated by a thumbscrew, wooden head and handle with varnished finish.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, brace

The Philips Company was founded in 1891, by Gerard Philips and his father Frederik Philips in Holland (Netherlands) and started the production of carbon-filament lamps and other electro-technical products in 1892. The first Philips shaver was introduced in the 1930s, and was simply called Philishave. The Philishave has remained part of the Philips product . In 2018, the independent Philips Lighting N.V. was renamed Signify N.V. However, it continues to produce and market Philips-branded products such as LED light bulbs After World War 11 1939-45, new estates were opened for housing returned soldiers in City of Moorabbin and most of the men began using the new convenient electric razors manufactured by Philips and Gillette.An electric shaver 'Philishave' c 1950 with box, shaver head protector, electrical cord and plug Box ; PHILI SHAVE / PHILIPS Trademark Shaver :PHIL / SHAVE / AW / 209230V 4030 / AC ONLY / RTM / PHILLIPS / MADE IN / AUSTRALIApersonal effects, razors, electric shavers, philips pty ltd,, early settlers, city of moorabbin, post world war 11 settlement, bentleigh, highett, cheltenham, ormond, reed george, clark judy

These multi function pliers were imported and used in Moorabbin Shire Many tools were imported by early settlers and also among the early settlers in Moorabbin Shire were blacksmiths who made tools for the other settlers who were establishing the homes, market gardens, farms, orchards and various businesses. Early settlers were self reliant and repaired their own equipment for kitchen,dairy, farm, horses, carts using various tools . This pair of multi purpose pliers is typical of the type used by early settlers in Moorabbin Shire c1900 Steel adjustable locking pliers c1900 with lion head vise, and spring loaded multi grip FOREIGNadjustable pliers, early settlers, market gardeners, blacksmiths, tools, building equipment, hammers, moorabbin shire, bentleigh, mckinnon, highett, cheltenham,mcewan james pty ltd, melbourne, bunnings pty ltd,

Made in England, O'Cedar Ltd Slough, BucksA small duster mop impregnated with 'O-CEDAR' furniture polish with cotton head and wood handle O'Cedar Dust Absorbing Handimop for your car - for your furnituremop, manufactured object, o'cedar

Sepia Studio portrait woman head & Shoulders. Growelle 69& 71 Swanston Street Melbourne.Growelle 69 & 71 Swanston St Melbourne.photograph, person, female

Head and shoulder portrait of a man wearing a jacket and bow tie. He also has a beard.photograph, portrait, male, portrait of a man

Buildings in front of poppet head. Smoking chimney in background. Inscriptions: 'Hercules' on the back, written in pencil.topic, mining