Showing 2176 items
matching house design
-
Geoffrey Kaye Museum of Anaesthetic History
Mask, Schimmelbusch, Elliott, c. 1930s
Curt Theodor Schimmelbusch (November 16, 1860 – August 2, 1895) was a German physician and pathologist who invented the Schimmelbusch mask, for the safe delivery of anaesthetics to surgical patients. In 1890, Schimmelbusch invented a mask for the delivery of anaesthetics to surgical patients. It was primarily designed for ether anaesthesia, but he also proposed its use for chloroform anaesthesia. Schimmelbusch designed a metal mask, over which a gauze could be stretched and secured. The mask was placed over the patient's mouth and nose, and anaesthetic was applied to the gauze, allowing the patient to inhale the anaesthetic as they breathed normally. Around the edge of the mask, a trough collected the residual anaesthetic, rather than allowing it to drip onto the patient's face.Oval shaped metal mask with a collapsible cross-shaped dome, hinged clamp and flat handleStamped into underside of handle: ELLIOTT SYDNEYschimmelbusch, mask, open method, chloroform, ether, german, physician, pathologist -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, Magill, 1926
Ivan Magill (1888-1986) designer, this piece was designed in 1926 along with other anaesthetic equipment.Chrome plated straight complete Magill laryngoscope in medium size format, with attached light bulb. Cylindrical handle for battery deposit and with a wavy hand grip for easy handling. Serrated and screwed lids on top and base of the handle grip for insertion of batteries and checking of electrical contact stud. The handle also has a metallic switch without any instruction of use. The arm of the handle has a detachable screw to adjust extendable blade position and firmness. The light bulb is attached to a metallic tube connector to the handle arm which is just pressed to the contact point base. The blade has a oxidation spot under the blade. The piece in full has several scratches marks mostly founded in handle, arm and top blade areas. Two stamped inscriptions are present on the arm area, the manufacturer name and register number.Stamped on the arm of the handle lateral side, A.CHARLES KING Stamped on the arm of the handle opposite lateral side, REG. NO. 74901[9]magill, a. charles king ltd, regi. no. 749019, switch, laryngoscope -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, Chevalier Jackson, Circa 1913
Please refer to The Wood Library for further information about this piece. URL: https://www.woodlibrarymuseum.org/museum/item/664/jackson-laryngoscope Chevalier Jackson direct laryngoscope, with attached small light bulb inside the internal blade. Brass coated piece with a large size. This piece has a discoloured and beaten surface with visible hit marks, deformation at the back of the blade and green spots in handle area. The hand anatomic handle is faceted and designed with a thumb rest section at the angle. Welding sections are visible along the blade base external canal and handle attachment area. No inscriptions.Anychevalier jackson, laryngoscope, light bulb, brass -
Geoffrey Kaye Museum of Anaesthetic History
Inhaler, Clover, Mayer & Meltzer, 1877
Dr. Joseph Clover (1825-1882), an English physician, first described his Portable Regulating Ether Inhaler on Jan. 20, 1877. Clover was an especially sought after anesthesiologist and early pioneer in the specialty. This was the best-known of many inhalers that Clover designed. The dome-shaped reservoir was turned to points on a control dial to gradually increase or decrease the percentage of the air that passed over the ether. Several inventors based new inhalers on this, while the original continued to be manufactured as late as the beginning of WWII. (Source: Wood Library Museum)Black round topped box with brass hooks at front and brass hinges at rear. There is a black fabric handle on the top. Inside the box is black padding with the manufacturer's logo printed in gold leaf. There is a square section in the base of the box for holding the square clear glass bottle for ether. There is also a dome-shaped metal inhaler with a "whistle tip" type connection to the mask. The mask is made of tan leather. There is also a metal ether measure for pouring the ether.Printed in gold leaf inside lid of box: MAYER & MELTZER [?] PORTLAND ST. / MAKERS •Engraved on side of inhaler: Mayer & Meltzer / London •Stamped on connector of inhaler: MAYER & MELTZER RN NO 212327 •Engraved on rear of inhaler: Clover's Inhaler •Printed in white on blue sticker: O.2.5A •Measurements have been stamped on the bottom of the inhaler. •Printed in black ink on mask: MADE IN ENGLAND •Stamped on metal connector inside mask: 6 •Printed in black ink on white manufacturer's label on glass bottle: ETHER PURUS '720 / H. Francis & Co., Melbourne.clover, joseph, mollison, crawford henry, george bankin, mccaul, kevin, royal women's hospital, coroner, freemason, surgeon, gynaecologist, obstetrician, mayer & meltzer, francis & co, melbourne, ether purus -
Geoffrey Kaye Museum of Anaesthetic History
Inhaler, Clover (modified), Allan & Hanbury
Dr. Joseph Clover (1825-1882), an English physician, first described his Portable Regulating Ether Inhaler on Jan. 20, 1877. Clover was an especially sought after anesthesiologist and early pioneer in the specialty. This was the best-known of many inhalers that Clover designed. The dome-shaped reservoir was turned to points on a control dial to gradually increase or decrease the percentage of the air that passed over the ether. Several inventors based new inhalers on this, while the original continued to be manufactured as late as the beginning of WWIIMetal based inhaler with glass dome lid. From the glass dome an elbow joint leads to a bulb for a rebreather bag [no bag]. There is a cork sealing an opening at the rear of the metal base and a blue sticker adhered.Printed in white on blue sticker: O.2.10 Manufacturer's logo moulded into metal insertjoseph clover, portable regulating ether inhaler -
Geoffrey Kaye Museum of Anaesthetic History
Inhaler, Clover (sectioned)
Dr. Joseph Clover (1825-1882), an English physician, first described his Portable Regulating Ether Inhaler on Jan. 20, 1877. Clover was an especially sought after anesthesiologist and early pioneer in the specialty. This was the best-known of many inhalers that Clover designed. The dome-shaped reservoir was turned to points on a control dial to gradually increase or decrease the percentage of the air that passed over the ether. Several inventors based new inhalers on this, while the original continued to be manufactured as late as the beginning of WWII. Dr Geoffrey Kaye sectioned equipment, enabling medical students to see the inner workings and gain insight into the engineering of the equipment.Cross section of Clover's inhaler attached to a circular metal base.Handwritten on white sticker at rear: P / 26 / B •White print on blue sticker: O.2.3. •Engraved on dome side of inhaler: G. Kaye sect. 1939.joseph clover, geoffrey kaye -
Geoffrey Kaye Museum of Anaesthetic History
Equipment - Inhaler, Clover, Mayer & Meltzer
Dr. Joseph Clover (1825-1882), an English physician, first described his Portable Regulating Ether Inhaler on Jan. 20, 1877. Clover was an especially sought after anesthesiologist and early pioneer in the specialty. This was the best-known of many inhalers that Clover designed. The dome-shaped reservoir was turned to points on a control dial to gradually increase or decrease the percentage of the air that passed over the ether. Several inventors based new inhalers on this, while the original continued to be manufactured as late as the beginning of WWII. Dome shaped metal chamber with a red leather face mask attached at one end and a metal elbow joint at the other, including a bulb for a rebreather bag and a tap mechanism.Engraved on dome of chamber: Mayer & Meltzer / London / Clover's Inhaler •Stamped on flat base of chamber: 1 2 3 1 2 3joseph clover, portable, inhaler -
Geoffrey Kaye Museum of Anaesthetic History
Inhaler, Clover, The Holborn Surgical Instrument Company, 1877
Dr. Joseph Clover (1825-1882), an English physician, first described his Portable Regulating Ether Inhaler on Jan. 20, 1877. Clover was an especially sought after anesthesiologist and early pioneer in the specialty. This was the best-known of many inhalers that Clover designed. The dome-shaped reservoir was turned to points on a control dial to gradually increase or decrease the percentage of the air that passed over the ether. Several inventors based new inhalers on this, while the original continued to be manufactured as late as the beginning of WWII. Clover, to spare the patient the unpleasantness of induction with his "closed" inhaler (1877), suggested the "mitigated-ether" technique. The inhaler was fitted with a bypass tap for the reception of N2O. The bag was filled with the gas and anaesthesia was inducted a combination of N2O and asphyxiation. Ether was then admitted gradually by rotation of the bowl of the inhaler. When the patient had been duly "weaned over" to ether, the mask was lifted, the N2O allowed to escape, the bag refilled with exhaled air, and normal anaesthesia "a la Clover's inhaler" was continued.Metal domed chamber with a bulb attachment for rebreather bag, including a tap mechanism. Remnants of the paper rebreather bag are attached to the bulb. At the other end is a yellow facemask made of plastic (probably celluloid). The manufacturer's logo has been moulded into the dome of the chamber.Manufacturer's logo: THE HOLBORN / SURGICAL INSTRUMENT CO. LTD. / LONDON •Blue sticker with white writing: O.2.4.joseph clover, mitigated-ether, nitrous oxide, n2o, closed method -
Geoffrey Kaye Museum of Anaesthetic History
Inhaler, Clover (modified), Mayer & Co. London, c. 1906
Dr. Joseph Clover (1825-1882), an English physician, first described his Portable Regulating Ether Inhaler on Jan. 20, 1877. Clover was an especially sought after anesthesiologist and early pioneer in the specialty. This was the best-known of many inhalers that Clover designed. The dome-shaped reservoir was turned to points on a control dial to gradually increase or decrease the percentage of the air that passed over the ether. Several inventors based new inhalers on this, while the original continued to be manufactured as late as the beginning of WWII.Metal dome chamber with flat base and two circular pains of glass on each side of the dome as viewing holes. There is a long connector tube with an elbow joint attached to a bulb for a rebreather bag. A previous exhibition label, typed in black ink on buff coloured card, has been tied to the connector.Moulded into the connector for the rebreather bag: MAYER & MELTZER No 212827 •Printed in white on blue sticker: O.2.9. •Stamped into dome: MAYER & MELTZER / LONDON •Typed onto exhibition label: MODIFIED CLOVER'S INHALER. / c.1906. / Name unknown. the modification consists / in windows to shew the ether-level in the / bowl. The inhaler has otherwise the same / restricted channels as the model of 1877 / and shares its faults. / (Gift of Dr. A.E. Rowden White, 1939).joseph clover, wilson smith -
Geoffrey Kaye Museum of Anaesthetic History
Inhaler, Clover, c. 1877
Dr. Joseph Clover (1825-1882), an English physician, first described his Portable Regulating Ether Inhaler on Jan. 20, 1877. Clover was an especially sought after anesthesiologist and early pioneer in the specialty. This was the best-known of many inhalers that Clover designed. The dome-shaped reservoir was turned to points on a control dial to gradually increase or decrease the percentage of the air that passed over the ether. Several inventors based new inhalers on this, while the original continued to be manufactured as late as the beginning of WWII.Metal domed chamber with a bulb attachment on an elbow joint for rebreather bag. There is also a connector for a facemask, but no facemask.White printing on blue sticker: O.2.2. •Engraved on dome: Clover's Inhaler / 1877.joseph clover, portable regulating ether inhaler -
Geoffrey Kaye Museum of Anaesthetic History
Inhaler, Clover, Mayer & Meltzer
Dr. Joseph Clover (1825-1882), an English physician, first described his Portable Regulating Ether Inhaler on Jan. 20, 1877. Clover was an especially sought after anesthesiologist and early pioneer in the specialty. This was the best-known of many inhalers that Clover designed. The dome-shaped reservoir was turned to points on a control dial to gradually increase or decrease the percentage of the air that passed over the ether. Several inventors based new inhalers on this, while the original continued to be manufactured as late as the beginning of WWII.Metal domed chamber with a bulb attachment on an elbow joint for rebreather bag. There is also a connector for a facemask, but no facemask.Engraved on dome of chamber: Clover's Inhaler / Mayer & Meltzer / London •Moulded in to metal at connector: MAYER & MELTZER RD. NO. 212327joseph clover, closed administration, mayer & meltzer -
Geoffrey Kaye Museum of Anaesthetic History
Inhaler, Clover, Mayer & Meltzer
Dr. Joseph Clover (1825-1882), an English physician, first described his Portable Regulating Ether Inhaler on Jan. 20, 1877. Clover was an especially sought after anesthesiologist and early pioneer in the specialty. This was the best-known of many inhalers that Clover designed. The dome-shaped reservoir was turned to points on a control dial to gradually increase or decrease the percentage of the air that passed over the ether. Several inventors based new inhalers on this, while the original continued to be manufactured as late as the beginning of WWII.Metal dome shaped chamber with an elbow joint for attaching a rebreather. A cotton rebreather bag is attached.Engraved on dome: Mayer & Meltzer / London / Clover's Inhalerjoseph clover, edward henry embley, closed administration, rebreather -
Geoffrey Kaye Museum of Anaesthetic History
Inhaler, Clover (modified)
Dr. Joseph Clover (1825-1882), an English physician, first described his Portable Regulating Ether Inhaler on Jan. 20, 1877. Clover was an especially sought after anesthesiologist and early pioneer in the specialty. This was the best-known of many inhalers that Clover designed. The dome-shaped reservoir was turned to points on a control dial to gradually increase or decrease the percentage of the air that passed over the ether. Several inventors based new inhalers on this, while the original continued to be manufactured as late as the beginning of WWII. This modified version differs from the original Clover inhaler as it has a glass dome chamber at the top allowing the level of ether to be monitored.Metal based chamber with glass dome top. There is a metal connection point at the top of the glass dome for a rebreather bag, with a whistle tip connection point at the base of the chamber for a facemask. There is no rebreather bag or facemask. There is a black plastic stopper to the side of the chamber, with a glass bulb with a metal wire cage covering.joseph clover, lambert buck, closed administration -
Geoffrey Kaye Museum of Anaesthetic History
Inhaler, Hewitt's (modified), Coxeter
Sir Frederick William Hewitt (1857-1916) wrote one of the earliest comprehensive textbooks on anaesthesia, and designed several pieces of anaesthetic equipment. In 1901, he described his wide-bore ether inhaler, a modification of the Clover Ether Inhaler. Unlike the Clover, it can be refilled with ether while still in use, and the mask is screwed into place so that it "cannot be unexpectedly detached." This version is a modified Hewitt's Inhaler which has a narrower 'ways' than the original Hewitt's, and no water compartment. Additionally, one side of the bowl is made of glass which enabled the person administering anaesthesia to see the level remaining in the bowl. Bowl shaped inhaler with a glass bowl base and metal dome top with a connector which appears to be for a rebreather bag. There is a metal switch at the base of the glass bowl to alter or regulate the flow.Stamped into central tube: COXETER LONDON Stamped into side of metal dome: 6460hewitt, wide-bore, clover, ether, anaesthesia, anesthesiology, anaesthesiology -
Geoffrey Kaye Museum of Anaesthetic History
Instrument - Laryngoscope, Chevalier Jackson, Circa 1913
It is likely that this object belonged to Dr Giles.Chevalier Jackson medium size steel made laryngoscope. Hexagonal shape design on handle and arm blade with a thumb support at the handle angle, missing the bulb light and all the system to support it. Deep scratches over the top and under blade with presence of dust marks over the handle, arm and inside the blade canal. Also has a grey paint mark over the top blade area. No stamped inscriptions are present just a label attached with a possible owner's name and a reference code to the museum old catalog.Attached label hand written inscription, Giles / S 4. 13chavalier jackson, laryngoscope, stainless steel -
Geoffrey Kaye Museum of Anaesthetic History
Equipment - Inhaler, Collison, Inhilation Institute Ltd, c 1932
This device was designed by W E Collison for self administration of oxygen therapy, particularly in the home. By his own description "It presents none of the tiresome and irksome features associated with medical apparatus and is readily understood by patients." Registration number: 772839 and 785517 Patent number: 415437Metal tubing designed to attach to an oxygen cylinder which leads to a number of gauges and continues on to a metal head which holds two glass bulbs. Glass bulb on left is amber in colour and the glass bulb on the right is clear.Both bulbs have residue on the inside. Between the bulbs is a connecter that leads to red rubber tubing that is fluted toward the end.collison, oxygen therapy, inhaler -
Geoffrey Kaye Museum of Anaesthetic History
Equipment - Mask, Ramsay Surgical Limited
One of a range of metal face masks designed to have a cover which helps protect the patient's face.Wire frame mask designed to cover mouth and nose. There is a metal hook on the left hand side protuding from the base of the mask and wire mesh raised from the base with a circle in the middle.facemask, anaesthesia, ramsay surgical -
Geoffrey Kaye Museum of Anaesthetic History
Inhaler, Rendle's cone, c. 1870
This inhaler appears to be a modification of the original Rendle's inhaler, developed in 1867 by Richard Rendle for use with bichloride of methylene. Rendle's original design was criticised as there was no clear way to regulate the dosage of anaesthetic and it was difficult to clean. Nevertheless, the inhaler was available until 1915. Richard Rendle was the second son of William Rendle (qv), Medical Officer of Health for St George the Martyr, Southwark, London, SE, of whom there is an account in the Dictionary of National Biography. Richard Rendle studied at Guy's Hospital, where he held the posts of House Surgeon, Surgical Registrar, and Demonstrator of Anatomy. He was afterwards House Surgeon at the Seamen's Hospital, Greenwich, and at the Waterloo Road Royal Infirmary for Women and Children, and then Resident Medical Officer at the Brompton Consumption Hospital. Resigning that post, he was put in medical charge of an emigrant ship to Australia, where he remained. He held several posts there: Resident Medical Officer of the Government Hospital, Fremantle; Medical Officer of the Lying-in Hospital and Hospital for Children; also Health Officer at Brisbane. In later years he practised at Taringa, near Brisbane, and died at Taringa, Queensland, on Aug 10th, 1907. The mask for the administration of bichloride of methylene was named after him in the instrument-makers' catalogues. (Source: RCS England, Plarr's Lives of the Fellows)Leather inhalational face mask in a cone shape covered with red flannel on the outside natural coloured linen lining the inside. There is a natural sea sponge inside the cone. A perferated ring sits at the top of the cone, surrounding a circular opening which is formed from metal. There is also a circular opening on the side.richard rendle, bichloride of methylene, guy's hospital, taringa -
Geoffrey Kaye Museum of Anaesthetic History
Mask, Yankauer, c. 1904
Sidney Yankauer, M.D. (1872-1932), an ear, nose and throat specialist and pioneer in bronchoscopy, practiced at the Mount Sinai Hospital in New York. Dr. Yankauer, a prolific inventor of medical equipment, might best be known for the tube he designed for suctioning the mouth and throat. Yankauer introduced the wire-mesh anaesthesia mask around 1904. The drop method involved placing the mask over the patient’s nose and mouth, and then placing gauze over the mesh of the mask. Next, liquid anaesthetic, such as ether or chloroform, was applied in drops or lightly poured onto the gauze so that the patient breathed in evaporated anesthetic as well as air. The gutter around the base of the mask was designed to catch any residue of the harmful anaesthetic. (The Wood Library Museum, 2016; Museum of Healthcare Kingston, 2016)A metal tear-shaped mask with gauze wire dome, gutter around the base and detachable spring piece with open circular handle to secure cloth over gauze. Found inside medical carry box #899Stamped underneath neck of circular handle: HATRICKdr [e.s.] holloway, hatrick, yankauer, drop method, mask, gauze -
Geoffrey Kaye Museum of Anaesthetic History
Mask, Murray
Seems to be a non- collapsible mask. Otherwise is a similar, thinner variety of Murray's mask, which was used for the administration of choloroform. John Murray was born in England, 1843 and described his wire mask in 1868 as a young chloroformist at Middlesex Hospital. It was wedge-shaped and made of thick wire and designed to be folded. The removable cover was originally made of several layers of flannel. Murray’s mask became very popular, especially in Australia, and was generally used with a single layer of flannel without an aperture or opening, as is this example. John Murray was an enthusiastic and innovative physician who also had an interest in nitrous oxide anaesthesia and conducted a series of experiments with J. Burdon Sanderson on dental patients comparing nitrous oxide to pure nitrogen. His career was short-lived and he died just before his 30th birthday. (Ball, C 1995, 'Cover Note: Murray's Chloroform Mask', Anaesthesia and Intensive Care, Vol. 23, No. 2, pg. 135)Triangular shaped wire mask covered by flannel. The flannel is sewn over frame and stitched around the base and along the vertical wire. The style and shape is similar to Murray's mask, which was used for the administration of chloroform, however this variation is not collapsible like Murray's mask.dr [e.s] holloway, mask, dr j. murray, chloroform -
Geoffrey Kaye Museum of Anaesthetic History
Goblet, Stuart Devlin, 1973
This goblet was gifted to the Faculty by Professor John Norman (UK) during the Combined Scientific Meeting (CSM) organized by Hong Kong College of Anesthesiologists (HKCA) with ANZCA, held in May 2001, Hong Kong. The goblet is a unique design by the Australian - born artist Stuart Devlin AO, CMG. Devlin is considered to be a significant contemporary gold and silversmith, having become well known as a London Designer in the '70s and '80s. His achievements include the Royal Warrant of Appointment as Goldsmith and Jeweller to the Queen of England granted in 1982.Hand made gold gilded sterling silver goblet. The stem is designed in a rope like twist holding up a simple tempered cup. The hallmarks are punched on the outside of the cup.[hallmarks] SD / lion passant / lion's head / Sprofessor norman, john, combined scientific meeting, csm, devlin, stuart -
Geoffrey Kaye Museum of Anaesthetic History
Anaesthetic machine, Minnitt, 1930 - 1937
This Minnitt machine was owned by Dr Mary Clementina DeGaris. Dr DeGaris qualified from medicine, MB BS, at the University of Melbourne in 1905. She continued her studies, becoming only the second woman in Victoria to qualify MD, in 1907. With the outbreak of war, DeGaris attempted to enlist as a doctor with the Australian Army but was refused. Undeterred she travelled to England, where she joined the Scottish Women's Hospitals for Foreign Service, a medical group made up entirely of women. After the war, she returned to Australia and set up practice as an obstetrician in Geelong, Victoria. Subsequently, the Geelong Hospital named a wing after her, "DeGaris House", which is now part of Geelong Private Hospital. DeGaris was awarded the St Saba medal, 3rd class, for her work during WWI. Robert James Minnitt introduced the concept of self-administered analgesia, using an apparatus designed and built in conjunction with London scientific instrument-maker, Charles King. The Minnitt apparatus met with considerable success and led to further modifications, including the introduction of the Queen Charlotte gas-air analgesia apparatus in 1936.Brown leather suitcase with brass locks and leather handle. Inside the case is metal equipment, with arms for attaching cylinders. On top of the case, located underneath the handle, is a small brass plate, bearing the name of the owner in black printed script on a piece of card or paper held inside the plate.Printed in black ink on name plate: Dr Mary C. De Garis.minnitt, geelong, scottish women's hospitals, world war i, obstetrician -
Geoffrey Kaye Museum of Anaesthetic History
Photograph
Robert James Minnitt introduced the concept of self-administered analgesia, using an apparatus designed and built in conjunction with London scientific instrument-maker, Charles King. The Minnitt apparatus met with considerable success and led to further modifications, including the introduction of the Queen Charlotte gas-air analgesia apparatus in 1936, manufactured by the British Oxygen Company.Black and white photograph of a Minnitt gas/air analgesia apparatus, in a Queen Charlotte case. The case is standing open with the apparatus inside. A label with instructions is on the left side of the case, and the apparatus is on the right side of the case. A nitrous oxide cylinder tank and valve is connected to a small box with a regulator. A tube with a breathing mask is attached to the box. The Queen Charlotte case has hinges on the side and a handle on the top.minnitt gas air apparatus, minnitt, nitrous oxide, queen charlotte case, anaesthetic equipment -
Geoffrey Kaye Museum of Anaesthetic History
Photograph
The Lidwill machine was designed by Mark Lidwill in 1913, for the purpose of mechanical or insufflation anaesthesia. It was manufactured by Elliott Bros. of Sydney.Colour photograph of a Lidwill anaesthetic machine sitting on carpet. A circular metal ether vaporiser sits on a brown wooden base, with brown tubes connecting to a trap bottle and metal valves, and a brown tube connected to the valve is coiled on the floor.anaesthetic equipment, lidwill anaesthetic machine, mark lidwill, ether vaporiser, elliott bros sydney -
Geoffrey Kaye Museum of Anaesthetic History
Photograph
The Bruck Inhaler is a modification of the Clover Inhaler, designed by Lambert Bruck.Colour photograph of a Bruck inhaler lying on its side on a wooden table. The metal inhaler is oval shaped with one half made of glass, and also has a vertical crosspiece. Lying next to the inhaler is a face mask and a filler for measuring ether.anaesthetic equipment, bruck inhaler, ludwig bruck, inhaler, clover inhaler -
Geoffrey Kaye Museum of Anaesthetic History
Photograph
The Lidwill machine was designed by Mark Lidwill in 1913, for the purpose of mechanical or insufflation anaesthesia. It was manufactured by Elliott Bros. of Sydney. Shortly afterwards, the Anaesthetic and Portable Machine Company of Sydney devised a machine that was functionally the same but also contained an electric lamp heater.Colour photograph of a modified Lidwill anaesthetic machine sitting on carpet, taken from above. The vaporiser is metal and circular, and has metal valves and controls and two orange tubes. The machine has an electric cord and power plug which is coiled on the floor.anaesthetic equipment, lidwill anaesthetic machine, mark lidwill, ether vaporiser, anaesthetic and portable machine company of sydney, vaporiser -
Geoffrey Kaye Museum of Anaesthetic History
Atomiser, De Vilbiss, Circa 1910
Dr. Allen De Vilbiss (1841-1917) of Toledo, Ohio, developed his first atomiser around 1887. This device was designed to allow for dissolving cocaine, as a local anaesthetic agent, in oil, and spraying into the nose and throat. In the early to mid 20th Century, The DeVilbiss Company began making perfume atomisers instead of medical ones. Red, heavy cardboard box with manufacturer's label at one end, containing a glass bottle with metal spray attachment, and a khaki rubber bulb for pumping liquid through the atomiser.Stamped into top of metal atomiser: DE VILBISS TOLEDO USAatomiser, local anaesthetic -
Geoffrey Kaye Museum of Anaesthetic History
Bird Anaesthesia Assistor/Controller Mark 4
The Bird Mark 4 is an anaesthesia assistor or controller with pressure and volume controller to be driven by a respirator. Combination of Mark 4 with respirator makes an automatic anaesthesia respirator eliminating manual bagging. The machine can work through Boyle anaesthetic system. It is designed for both paediatric and adult application. (Drugs and Equipment in Anaesthesia Practice, Aruna Parameswari, 2019)Green metal box atop a clear plastic unit with a black bellows inside, which forms one part of the overall unit. The unit is attached to a pole, enabling height adjustment. The pole is, in turn, attached to a set of four castors [not original].White text on black stick on strip on top of metal box: DO NOT PULL APART / FOR USE IN THEATRE ONLY A series of instructions are printed in white text over the unit.anaesthesia assistor, anaesthesia controller, pressure controller, volume controller, paediatric, adult -
Moorabbin Air Museum
Administrative record (item) - Documents Relating to a CAC Designed and Produced Housing Project, Housing Project - Myer House
Includes floor plans and other documents relating to the project -
National Vietnam Veterans Museum (NVVM)
Photograph, Ap Sui Nge Refugee Village
A black and white photograph of A Digger from 1st Australian Civil Affairs Unit stationed at 1st ATF Base in Phuoc Tuy Province assisted by a villager cuts timber for house construction during the building of the Ap Sui Nge Refugee Village. The village was designed by the officers and men of the 1st Australian Civil Affairs Unit and built as a major project involving Task Force Unitsphotograph, 1st australian civil affairs unit, 1st atf base, phuoc tuy province, ap sui nge village, gibbons collection catalogue, digger