Showing 4424 items
matching shaped
-
Emerald Museum & Nobelius Heritage Park
Ring and Pin for Bullock Yoke
Iron pin 24.5cm long, attached to an iron ring of 12cm diameter, via an ovoid shaped hole in the pin. -
Wodonga & District Historical Society Inc
Functional object - Water Pump Pressure Gauges, North East Region Water Authority, Wodonga, Early 1900s
The water pump pressure gauges were used by the Wodonga Waterworks Trust and Sewerage Authority, which were established in 1897, and had the responsibility for providing Wodonga's drinking water and managing the wastewater. In 1923 a Wodonga Waterworks Trust referendum to provide funding for new infrastructure to supply more water of better quality to Wodonga was passed. This included building the Wodonga Water Tower and it was completed in 1924. It supplied water to Wodonga until 1959, when it was drained and decommissioned after the No 1 Basin on Huon Hill was completed in 1958. In 1983 the Wodonga Waterworks Trust and the Wodonga Sewerage Authority became part of the Wodonga Council. By 1989 a filtration plant at Huon Hill was completed, which provided filtered water of improved quality to Wodonga, in accordance with the World Health Organisation’s guidelines. In 1994 the Kiewa Murray Region Water Authority took over the Wodonga Council’s water and wastewater operations, and then in 1999 the Kiewa Murray Region Water Authority combined with the Ovens Region Water Authority and became the North East Region Water Authority or NERWA. NERWA then became known as North East Water.The water pump pressure gauges have local significance due to their use by the Wodonga Waterworks Trust and Sewerage Authority, and donation from the North East Region Water Authority. They also have wider historical significance as examples of the equipment used in the management of water in Victoria and Australia.Five metal and glass water pump pressure gauges, including one with a U-shaped pipe and lever attached. "-HOMPSONS (CASTLEMAINE) LT-" on pressure gauge no.1 "BOURDON'S / PRESSURE GAUGE / THE AUSTRAL OTIS /ENGINEERING Co. LD. / MELBOURNE" on pressure gauge no.2 "No. 1609 / POUNDS PRESSURE / PER SQ. INCH / FEET HEAD OF WATER" on pressure gauge no. 3 "FEET HEAD OF WATER / THOMPSONS (CASTLEMAI-- LTD" on pressure gauge no. 4 "SET SLOW 33' -" / BUDENBERG / MADE IN AUSTRALIA / ft water / 1 4 9 3 9 each number underlined" on pressure gauge no. 5north east region water authority, nerwa, wodonga sewerage authority, north east water, n.e. water, wodonga waterworks trust, pressure gauges, water pump pressure gauges -
Blacksmith's Cottage and Forge
Biscuit Forcer
Dough was put in forcer/case/cylinder and wooden pin pressed down to force dough out as a star-shaped biscuit. In use in a working-class home in the mid 20th century.Representative of kitchen utensils in common use in working class kitchens in 20th century prior to the common availability of packaged biscuits. Tin/metal outer cylinder/case/open one end, lid other end, with star pattern (can be removed for washing). Inner wooden pin or forcer, knob on end to be pushed into metal cylinder to force dough out through patterned disc.domestic, kitchen, food, technology, biscuit, forcer, baking, woman s, work, appliances -
Melbourne Tram Museum
Sign - Door stop sign ex an Z3 tram, Yarra Trams
Fitted to the folding doors of a Z3 class trams to warn motorists that a passenger was about to alight or board and that they must stop. Sign shaped to be above heads of people waiting on platform stops.Demonstrates methods of warning motorists that they must stop when passing a tram.Sign - galvanised steel sheet with a baked white enamel paint finish and overlaid with a reflective white and red "Stop" Two samples held - one with a more extensive red section. Has three stainless steel bolts with washers on the right hand side to fix the sign to an opening door.tramcars, z3 class, signs, passengers, safety -
Warrnambool and District Historical Society Inc.
Bottle, R F Kennedy & Co x2, Early 20th century
These bottles were used in the Warrnambool pharmacy of R. F. Kennedy & Co. Richard Frank Kennedy (1826-1903) was born in England and came to Warrnambool in the early 1880s, establishing a pharmacy in Timor Street. This was a retail, wholesale and manufacturing business. In 1891 Kennedy erected a new building which was described as one of the most elegant and best-stocked chemist’s shops in Victoria. Kennedy was active in Warrnambool community affairs and was a foundation member of the Warrnambool Bowls Club, being its first Vice-President and an early President. His business continued on after his death, trading as ‘R.F.Kennedy and Co.’ Richard Frank Kennedy was one of the most significant businessmen in Warrnambool in the late 19th century. The products of his shop and factory were distributed all over Victoria and beyond. These bottles are good examples of the types used in the Kennedy pharmacy. They show the well-known Kennedy lighthouse symbol. Warrnambool still has two working lighthouses today. These are two clear glass chemist’s bottles. They are identical in size and shape. They have a rectangular-shaped body with rounded edges, a circular-shaped neck and a moulded top with an opening. There are no stoppers. The sides of the bottles have the Kennedy logo of a lighthouse on a rocky cliff on the coastline with ships in the distance and the name of the chemist (R.F.Kennedy). ‘2/3 viii’ ‘R.F.Kennedy & Co. Chemists Warrnambool’ ‘L 389 M’ ‘A.G.M.’ r.f.kennedy,, warrnambool chemist, chemists in warrnambool, history of warrnambool -
Kiewa Valley Historical Society
Cream Can - Large
Milk and cream were stored in steel cans for transportation to stores or local dairy companies.The dairy industry is and has been one of the major industries of the Kiewa Valley. This cream can was used on a dairy farm in the Kiewa Valley.Large steel dairy can used for cream or milk. The irregular shaped ring handles are welded on each side in an upright position. The lid is stuck on the can. The flat outer edge of the lid has an inscription. The centre of the lid is indented with a bar shaped handle welded across it to enable lifting.Embossed at the top of the straight sides is "Dairymaster" between the handles on each side. Lid: "B.L.Paynter" along the outer edge.dairy; cream can; kiewa valley -
Flagstaff Hill Maritime Museum and Village
Ceramic - Beer Stein, Reinhold Merkelbach, 1945 to 1964
This mug was made by Reinhold Merkelbach. Reinhold Merkelbach was founded in 1845 by Wilhelm Merkelbach, a descendent of a long line of German potters, and the company eventually took the name of his son Wilhelm Reinhold Merkelbach, who left school early to get involved with the family business. The company became a major name in German ceramics, especially in the Jugendstil style. The company produced a large number of collectable beer steins in the late 18th and early 19th centuries, including a number of so-called “character steins.” In 1882, the firm began producing art pottery, which at that time was enjoying a revival and new appreciation in Europe in general and in Germany in particular. Reinhold Merkelbach produced ceramic objects both with and without pewter hardware but rarely altered its manufacturing techniques. Many of its products were destined for use at pubs, bars, or breweries as well as in the homes of Germany’s beer-drinking populace. It had a retail location in Munich and also sold products through its factory warehouse. In 1971, half of the company’s ownership was sold to W. Goebel KG and the firm’s name changed officially to Merkelbach Manufaktur GmbH & Co. KG. Goebel ultimately purchased the other half of the business before members of the Merkelbach family, along with a handful of collectors and former staff members, repurchased the factory in 1988. In 2007, Judith Merkelbach Engelmann decided to close the firm; demand for ceramics had been decreasing and the next generation of the family had no interest in maintaining the business. Luckily, Reinhold Merkelbach transferred its moulds to Töpferei Girmscheid Höhr-Grenzhausen to ensure that its best-known pieces of Jugendstil art pottery and steins would continue to be available to interested consumers and collectors.This beer stein was made around the mid-20th century by a popular German maker. It fits in with the context of maritime village life. At this current time, there is no particular connection with people, places and events. The German beer stein is made from ceramic ironstone. It has a bell-shaped hinged pewter lid with a leaf-shaped thumb lever. The lid has a pattern stamped on it. The design on the mug includes a woman in bright colours, a man holding a musket, and buildings in mountain settings. There are inscriptions on the mug. Marked "Made in Germany" "RM" "4070" (underside of mug) "05" to the side of mug flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, beer stein, ceramic beer stein, reinhold merkelbach, drinking vessel -
Flagstaff Hill Maritime Museum and Village
Domestic object - Food Mill, 1950s+
The Moulin Legumes No. 3 food mill is a useful manual kitchen utensil for milling, sieving, grating and pureeing various food types (legumes, vegetables, fruit and herbs). The food is placed in the chamber and the handle is turned to push the food through the holes in the blades and into a bowl placed below it. The various blades allow choice of consistency as they have different sized holes. It was in use before electric food processors were invented and is still used in modern times. The vegetable mill was invented by the French inventor and industrialist, Jean Mantelet, in 1932. Inspired by his wife, he invented the mill, which simply and quickly made cooked food into puree or mash. He said "My greatest pride is to rid women of a daily chore." The business started using the brand Moulinex in 1956 and today is it a household name linked to useful and good quality kitchen utensils and aids. The name comes from combining the words Moulin Express, which was an electric coffee mill. The embossed text "BREVETE S G D G" was a type of French patent without a government guarantee. It stopped being used in 1968. This Moulin is an example of a kitchen utensil used before electric food processors were invented, and had gained popularity to process foods such as vegetable's, fruit, nuts and herbs in a domestic or commercial kitchen. The first model of the Moulin Legunes was invented in 1932 by French industrialist Jean Mantelet to meet the reduce labour for housewives in the kitchen. Millions of this labour saving device have since been sold. Food mill, metal, for manually processing food. Conical-shaped food chamber, two U-shaped handles on opposite sides, two clips inside. Three interchangeable twelve-sided cutting blades, each with different sized holes. Made in France. Model is Moulin Legumes No. 3. Impressed into the side, within a circle "MADE IN FRANCE - BREVETE S G D C -" and in centre "2" (Brevete is French word for Patent)flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, made in france, french kitchen utensils, moulin, food preparation, kitchen utensil, food mill, food processor, sieve, moule, mouli, grater, puree, hand operated, moulin legumes no. 3, vingage, kitchen gadget, moulineux, jean mantelet -
Bayside Gallery - Bayside City Council Art & Heritage Collection
Photograph - hand-coloured photograph, Brighton Centenary Year, Stage decoration, Mayoral Ball, c. 1959
This work was presented to The Mayor and Mayoress, Cr. and Mrs R.G. Ward, by the citizens of Brighton to commemorate the Brighton Centenary in 1959. Brighton was first incorporated as a borough on 18 January 1859, it became a town on 18 March 1887 and was proclaimed a city on 12 March 1919. The new Brighton Municipal Offices were designed by Kevin Knight of Oakley and Parkes with the engineers John Connell and Associates and were erected by Prentice Builders Pty Ltd. The foundation stone was laid on 13 February 1959 and the building was opened on 21 July 1961. The interior decoration and furniture was by Grant Featherston.brighton centenary, brighton town hall, stage decoration, mayoral ball, brighton municipal offices, civic centre, oakley and parkes, kevin knight, r.g. ward, mayor -
Bendigo Military Museum
Accessory - IDENTITY DISCS, WW1
WW1 identity discs belonging to "J.P. Vercoe". See catalogue No. 9557 for details of his service. Part of the Cooper Collection.1. Octagonal shaped WW1 identity disc stamped with owner's details. Two holes punched in disc to accommodate a cord. Pressed fibre construction. 2. Circular shaped WW1 identity disc stamped with owner's details. Hole punched in disc to accommodate a cord. Pressed fibre construction.1. & 2. Stamped in each disc: '2530, J.P. Vercoe, 60, A.J., C.E.'cooper collection, identity discs, j p vercoe, ww1 -
Bendigo Historical Society Inc.
Ephemera - GREETING CARD, 1898
Greeting Card: Rectangle shaped Forget Me Not Christmas Greeting Card with green velvet cover. A Cream coloured moulded plastic like material fan shaped over a cream padded fan shaped silk material. 'Forget Me Not' is inscribed and has a cream ribbon woven through the fan. Painted flower across the front. Small metal lace work is in the left hand corner. The back is card with Christmas 1898' hand written. Back is torn. Box 625.ephemera, mementoes, christmas, christmas greeting card -
Parks Victoria - Gabo Island Lightstation
Cork fragments
From accompanying interpretive sign,"Early life jackets and life- rings were made using cork for bouyancy. A poignant reminder of the risks facing seafarers". Triangular and rectangular pieces of cork are from old life jackets. Curved piece with canvas remnant and white paint is a section of an old life ring. The piece with hole and split is a float off a fishing net. As cork is also used to provide buoyancy to fishing nets, further information on these fragments, such as their degree of rarity, and the historic use of cork for buoyancy in relation to lightstations and rescue equipment would be helpful. They will have second level contributory significance if it can be established that they are historically associated with the functions of the lightstation. 1. Triangular shaped piece of cork, has holes and cracks. 2. Rectangular shaped piece of cork, has large holes through piece. Remains of white textile covering on two sides (long sides). Piece is slightly convex. 3. Rectangular pieceof cork. Corners are rounded . Rough pitted surface. 4. Tube shaped section of cork. Has hole through middle with split in one side extending to hole. Around outside there are even lines extending horizontally. -
The Ed Muirhead Physics Museum
Wheatstone Bridge Leeds & Northrup Co
Machined metal sides and interior, machined plastic top with plastic dials, handmade wood base with dovetail joins and mitred corners. Perforated machined metal surface spray painted, machined plastic surface coating, wood base most likely hand varnished. Surface finish: metal sides painted matt blue, plastic top brownish red coating with smooth matt finish, wood base varnished. Inscribed on top face: “LEEDS & NORTHRUP CO./PHILADELPHIA/62798. Paper Sticker on back metal side: “PA 3” Diamond shaped paper label adhered to top face with diagram handwritten in black ink. -
Colac RSL Sub Branch
Medal - 1914-15 Star awarded to J. Bonner Service No: ??, World War 1 Medal and Ribbon. 1914-15 Star (?? 2nd Boer War 190? - 1903?)
Boer War??SignificantBrass Star with Red, white and blue Ribbon attachedFront:- Crown atop a star shaped medal. Wreath surrounding crossed swords and "V" in a circle (Lower point of the star) Rear:- Sut. J. Bonner. 2nd. S.A.M.R. (?? 2nd South Australian Mounted Rifles??)military awards -
Orbost & District Historical Society
paling knife, c. 1890s to 1960s
Used in the timber industry for making split palings. The palings are shaped by hand with the bottom edge put onto the timber and a mallet hit onto the top of the blade. This pre-dates sawn palings. Associated with the timber and household building industry in the Orbost region.A rectangular flat iron blade attached to a wooden handle. The cutting edge of the knife is along the bottom (rather than the end as with an axe). The wooden handle appears to be made from a small tree branch.paling-knife splitting-timber -
Australian National Surfing Museum
Photograph, Photographer Unknown, Peter Townend and three surfboards, circa 1976
This is a rare colour photograph of Australian surfer Peter Townend in Hawaii with three of his surfboards from his World Championship Year, 1976. Townend shaped the two surfboards he is holding.Two of the three surfboards Peter Townend is holding appeared on the cover of American surfing magazines - SURFER vol 15 #5, January 1975 and SURFER vol 18 #1, May 1977.Colour photographpeter townend, surfer magazine, -
National Wool Museum
Cuff links
Pairs of gold plated promotional cuff links shaped as merino rams. Part of a collection of Australian Wool Corporation promotional memorabilia believed to have used in the era of Sir William Gunn.wool marketing, australian wool corporation, gunn, sir william -
National Wool Museum
Cuff links
Pairs of gold plated promotional cuff links shaped as merino rams. Part of a collection of Australian Wool Corporation promotional memorabilia believed to have used in the era of Sir William Gunn.wool marketing, australian wool corporation, gunn, sir william -
National Wool Museum
Cuff links
Pair of gold coloured metal cufflinks, shaped in wool mark logo. Part of a collection of Australian Wool Corporation promotional memorabilia believed to have used in the era of Sir William Gunn.wool marketing, australian wool corporation, gunn, sir william -
Warrnambool and District Historical Society Inc.
Bottle, F W Bloore, Early 20th century
This bottle was used in the pharmacy of the Warrnambool chemist Francis Bloore. It contained a mixture made up for Archdeacon Thomas Bennett who was the Anglican Vicar of Christ Church, Warrnambool from 1912 to 1915. As Captain Bennett he was the chaplain of the 22nd Battalion in World War One from 1915 to 1917. He became Archdeacon of Warrnambool in 1917 and held this position until 1937. He spent much time on his return assisting returned World War One soldiers and their kin in the Warrnambool area. He was the first President of the Warrnambool Returned Soldiers League. Francis Bloore, born in Ballarat in 1874, came to Warrnambool about 1912. In 1914 he leased a newly-built shop at the corner of Liebig Street and Raglan Parade and continued on the business until the late 1930s. This bottle is of great interest as it is one of the few items we have in our collection associated with the pharmacy business of Francis Bloore. The bottle is also associated with an important Warrnambool Anglican Church identity, Archdeacon Bennett. This is a glass bottle with a rectangular-shaped body with rounded edges, a circular-shaped neck and a circular moulded top with an opening. It has a cork stopper. The top of the bottle is chipped. The label on the front of the bottle is partly torn away and very stained with most of the handwriting and some of the printing indecipherable. The inside of the bottle is discoloured. ‘The Mixture …. tablespoonful with water every three hours - Archdn Bennett’ ‘Shake the Bottle’ ‘F.W. Bloore Pharmaceutical Chemist Liebig Street Warrnambool’ ‘RT & Co’ francis bloore,, warrnambool chemist, archdeacon bennett,, warrnambool anglican minister, history of warrnambool -
Federation University Historical Collection
Photograph - Photograph - Colour, Churchill Service Memorial, 2015, 2015
In recognition of its fallen soldiers and Churchill's 50th birthday a service memorial was erected on a concrete plinth at the Churchill town plaza and used for the first time to mark the ANZAC centenary on Anzac Day 2015. Churchill never had a war memorial and received a grant from the Department of Veterans' Affairs six years ago to commission a sculpture with Latrobe City Council's support. It was decided the sculpture needed to recognise more than just the war effort, but service and volunteerism, considering Churchill was only founded in 1965. (http://www.latrobevalleyexpress.com.au/story/2816903/churchills-new-memorial/, accessed 01 may 2015) Sculptor Paul Jesse discussed the work in Churchill and District Community news, 18 December 2014: Some time ago CDCA commissioned a sculpture to be used as a Service Memorial to commemorate the fallen that have died in service of our community and country. Traditional memorials usually commemorate Armed Services personnel, but CDCA was of the opinion that a more inclusive view which included Emergency Services personnel, such as CFA, SES and Police, could be incorporated into the Churchill Memorial. Boolarra artist, Paul Jesse, who is accomplished in Ferro-Cement sculpture techniques, was commissioned to create a memorial that would cause people to reflect on the meaning of ‘service’ and ‘sacrifice’. The following is a description of the Churchill Service Memorial Sculpture written by the sculptor, Paul Jesse. “My sculpture is different from most War Memorial sculptures because it uses as its basis the reasons why people go into service or to war. One side of the sculpture is colourful and optimistic; its theme is home, family, community and the future. These themes are crafted by flow lines which are connected to the other side of the sculpture through the round hole and the Crosspiece. These lines can be seen as a multi-layered connection between the sides. On the “dark” side of the sculpture, the lines begin with a spiral of coloured mosaics. This spiral is representative of our service people. Its beginning can be seen on one level as their soul. The spiralling mosaics of them flow to the other side of the sculpture where they create the landscape and figures. These lines can also be seen as a range of connectors between the two sides, representing a flow of thoughts, love, fear, concern and dreams. They also represent physical communication such as letters and phone calls.” This ‘Service Memorial’ is located in the Churchill Plaza (adjacent to the Town Hall), along with four flagpoles, seating and garden beds. The Churchill Service Memorial has deliberately been designed as a thought-provoking public art work. It will complement the Art and Culture Pathway which links Switchback Gallery at the Federation University Campus to the Town Centre. We hope Churchill citizens will pause to view the Memorial, ponder its meaning, reflect on the service of others and commemorate the fallen. Colour photograph on an abstract Australia-shaped sculpture by Boolarra artist Paul Jesse. The abstract Australia-shaped sculpture is in stark contrast to the bronze-cast "fallen mate" or concrete cenotaph seen in many country towns. The photograph includes wreaths from the ANZAC centenary service on ANZAC Day 2015. churchill, churchill war memorial, paul jessie, anzac centenary, federation university, gippsland, art and culture pathway, world war -
Parks Victoria - Days Mill and Farm
Functional object - Funnels
Used for pouring liquids and other substances.Funnels x 7, handmade. 6 conical shaped, 2 of these have angled spouts, vertical spouts on other 4. 1 x squarish shaped funnel, spout, vertical. 6 funnels have a ring for hanging purposes. Some have mesh where the spout joins body of funnel.[square funnel]: shell motif/ "BIO.." -
Flagstaff Hill Maritime Museum and Village
Textile - Bedspread, patchwork, 1976
This patchwork bedspread or quilt is a modern creation along the lines of the traditional 1800s handmade patchwork quilting craft. It is made from reproduction fabric and quilt designs and represents the bed linen typical of a late 19th-century bedroom. Years ago, patchwork was a form of recycling, where leftover or previously used pieces of fabric were used to create other useful item such as quilts, rugs, cushion covers and jackets. Special projects were sometimes made with fabrics representing special memories, such as pieces from baby clothes, wedding gowns, and school uniforms. The maker would use a cardboard template shaped like a hexagon, place it onto the fabric and trace around it. Often the cardboard was cut from a box such as a cereal box. Women would gather to work on their patchwork while enjoying their social time together. As in the case of this quilt, members of the Embroiderers Guild in Warrnambool worked on the project, designing and quilting as a group to achieve their aim, of presenting the quilt to the recently opened Flagstaff Hill Maritime Museum. The quilt was perfectly suited to dress the bed in the Lighthouse Keeper's Cottage. Provision was made for the quilt to be hung for display, with the addition of loops along one edge.This carefully created and designed, recently made patchwork bedspread typifies bedding and handcraft of the late 19th century. The bedspread was the first community project of the South Western Branch of the Embroiderers' Guild of Victoria, and presented as an addition to the Lighthouse Keeper's Cottage tat Flagstaff Hill. Patchwork bedspread or quilt, double bed size, made from hundreds of hexagonal-shaped fabric of various colours and patterns, carefully stitched onto a white background. One edge of the quilt has loops dispersed at regular intervals. This would allow the quit to be used as a wall hanging. It was handmade by the South Western Branch of The Embroiders Guild, Victoria, and presented to Flagstaff Hill Maritime Museum and Village in 1976. An inscription is embroidered in blue on a patch of the quilt. "Made and Presented by The Embroiderers Guild, Victoria (S.W. Branch) 1976"flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, bedspread, patchwork quilt, quilt, embroiderers guild, bedding, bed linen, 1800's handcraft, quilting, south west branch, warrnambool embroiders guild, recycled fabric, 19th century, household textiles -
Churchill Island Heritage Farm
Tool - mallet
This mallet is of a basic construction. It is a rough shaped head which has been reinforced with rivets. The handle is slim in relation to the mallet head. Timber mallets were used to knock timber pieces together.Wooden mallet, with a rectangular replacement handle affixed to a large block of wood. Two rusted rivets are affixed through the top of the block, which is missing a chunk from one side. mallet, woodwork, carpenter's tools, churchill island -
Bendigo Historical Society Inc.
Container - Crib Tin
The D-shaped mess tin was designed for the British Army in 1916 for WW1 soldiers. The back metal loop was designed for attaching to the greycoat carrier harness. It is possible that this item was then reused as a crib tin in the mines. A semi- circular container with a lid in a canvas bag that has a two centimetre diameter ring attached and two three centimetre wide leather straps attached. The lid can be completely removed from the tin, both have handles attached inside.crib tin, food container -
Melbourne Legacy
Photograph - Photo, Widows function, Fete, 1993
Widows beside trading tables of books and plants at Legacy House. It could have been a fundraising event. Names unknown. Same film as the photos of a cake shaped like the Shrine of Remembrance (00673).A record of the type of activities Legacy provided as a social outlet for widows. Colour photo x 2 of trading tables of craft and plants at Legacy house.Printing on the back "MCP * Nov93" on Kodak paper. 00674.1 has Pg 6 (C) in blue pen. 00674.2 has Pg 6 (A) in blue pen.widows, activities -
Orbost & District Historical Society
bottle, 1930's
A clear glass bottle which is hexagonal shaped. It has a threaded top. The front face is flat and the back and sides are curved.On the base- AGM 1SM45 6bottle australian-glass-manufacturers container -
Orbost & District Historical Society
bottle, After 1862
Spa water bottle made in Daylesford, Victoria in 1860's.Small oval-shaped green tinted spa water bottle with flat side. Wide neck with string tied around.Front - Established 1862, Trademark, C.R. Moore, Daylesford.bottle -daylesford-moore c.r. -
Orbost & District Historical Society
dish
Used as a vegetable dish and donated by Alice Slatter.White oval-shaped china dish with lid. Lid has handle. Bottom has broken handles. Raised base. dish china domestic-storage meakin-j&g -
Flagstaff Hill Maritime Museum and Village
Pattern
Pattern-hanging bracket slightly pyramid shaped object with wide base. Has square attachment both painted white. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village