Lapel Badge for the Tramway Board (predecessor to MMTB and the successor to the Melbourne Tramway and Omnibus Co. staff. Has abbreviation of "TB". Made from a cast brass item, nickel plated to indicate the position held by the wearer as part of their uniform. Cast in the form of the handwritten or script word/s and underlined. On the rear, silver soldered on are two brass loops at either of the badge to enable badge to be sewn or fitted with clips onto the cap or the uniform No manufacturer's name on the rear of the badge.trams, tramways, cap badge, hat badge, uniforms, tramway board

Used by tramways to indicate the position of the person to a passenger or another employee. Most likely made as a general production item by Stokes for tramways and railways.Demonstrates an item made to indicate the wearer's position of the tramway employee.Uniform Badge for a "Conductor". Manufactured by Stokes and Sons, Melbourne. Made from a cast brass item and then nickel plated. Cast in the form of the handwritten or script word/s and underlined and rounded to fit on a cap. On the rear, silver soldered on are two brass loops at either of the badge to enable to be sewn or fitted with clips onto a cap. On the back of the back of the badge in very small letters is the name of the manufacturer - Stokes & Sons / Melbourne. tramways, trams, cap badge, hat badge, uniforms

Issued by the Prahran and Malvern Tramways Trust to its Officers to enable free travel on its tramcars. See item 1659 for another example of a Sterling Silver pass and 399 and 576 for examples of a similar passlDemonstrates a travel pass issued to PMTT Officers.Set of two cast hexagonal nickel plated brass or sterling silver badges with a single hole in the top, with words "Prahran Tramways Trust Malvern" on one side and on reverse"Officers No. Pass" with the number "17" or "78" stamped in. One fitted with a nickel-plated ring. Raised edges with flat sides. Manufacturer unknown. On the lower edge of the reverse of badge 17 are the letters "STC.SN" stamped in, indicating a Sterling Silver item.tramways, trams, badges, tickets, travel pass, pmtt, officers, passes

This item is from a collection donated by descendants of John Francis Turner of Wodonga. A wide range of small china pieces carrying scenic views of holiday destinations or key locations were a popular kind of souvenir during much of the 20th century. Several different items have been produced to commemorate Wodonga and its landmarks over time. These items document key changes in Wodonga and its heritage. This plate depicts three key landmarks in Wodonga. THE SOLDIERS' MEMORIAL in Wodonga was unveiled on Tuesday 18th November 1924. It was designed by Messrs. Hosken & Co., of Hawthorn, Victoria. The monument is all of Australian workmanship. The pedestal is made of Harcourt granite, 9ft x 9ft at the base, and rising in seven courses to a height of 10ft 2in. The emblems (rising sun and wreath) are of bronze, and the lettering of the inscription and names of fallen soldiers are in raised lead letters. Originally the Memorial was completed with a full life size, 6ft in height, sculpture of an Australian soldier in Sicilian marble. The memorial bore the inscriptions: ERECTED BY THE RESIDENTS OF WODONGA AND DISTRICT IN MEMORY of the Men of this Town and District who fell in the Great War, 1914-1919, Also in grateful recognition of the men who served and returned. “Lest We Forget.” In 1982, due to frequent vandalism and high cost of materials to repair, the soldier statue was removed and later installed at the RSL Rooms. THE WATER TOWER is a major landmark of High Street, Wodonga. It began operation from January 1924 until it ceased operation in 1959. It stood unused for a decade until the lower section was modified and put to use as “ The Tower’s Cobbler’s Inn” in 1962. In 1972 Wodonga City Council proposed to demolish the Tower. Their suggestion received an unfavorable response from the city’s citizens, so the Tower still stands today. THE BAND ROTUNDA was officially opened on Sunday 5th September 1920 at the naming of the triangular reserve at the corner of High and Hovell Streets as Woodland Grove. The Wodonga Band gave a public performance on this occasion. The tri-coloured ribbon, which stretched across the entrance to the Rotunda was cut by Mrs R.H Murphy, daughter of Mr. John Woodland, secretary of the Wodonga Shire Council for 35 years, after whom the area was named. The rotunda has since been moved to Martin Park, Wodonga.This item comes from a collection used by a prominent citizen of Wodonga. It is also an excellent example of souvenir items created featuring landmarks to represent the city of Wodonga.A china plate depicting the Soldiers' Memorial Wodonga. The central coloured image is surrounded by a 8 representations of a variety of flowers and a silver edge trim. The makers mark underneath the dish was used between 1918 - 1939 so assists in establishing provenance of the irem.Beneath image: "SOLDIERS' MEMORIAL WODONGA On back of dish, Beneath a crown " VICTORIA CHINA CZECHOSLAVAKIA"victoria china, souvenir wodonga, wodonga soldiers memorial, woodland grove wodonga

Demonstrates the detail of the uniform of tramway/motorman workers.1940 - Cap Badge for a "Motorman". Made from a cast brass item, nickel plated to indicate the position held by the wearer on their cap as part of their uniform. Cast in the form of the handwritten or script word/s and underlined. On the rear, silver soldered on are two brass loops at either of the badge to enable it to be sewn or fitted with clips onto the cap. On the back of the back of the badge in very small letters is the name of the manufacturer - Stokes & Sons / Melbourne. Same manufacturers logo as in Reg Item 1937. Part of the ESCo company and possibly early SEC uniform. ESCo employee number on a special lapel bade - see Reg. item 1952. Not used by the SEC from 1940 - employee number on the cap but early SEC uniforms show them on the collar of the jacked - not known if this uniform adopted. See Reg. Item 1368 for photos of early SEC uniform showing badge on the neck. Assumed collected by Les Denmead from materials left over from the ESCo era in the SEC offices. 1940.1 - Item - as above, with "Stokes & Sons" stamped into metal on rear of badge. Item ex SEC. Item 1940.1 added 2/1/05. BACK - Stokes & Sonstramways, trams, cap badge, hat badge, uniforms, esco, btm, ballarat tramways

Two male teenagers sit at a table covered in a white tablecloth. One is being served by a waiter, who is placing potatoes on his plate from a silver tray, whilst the other sits with his plate complete with potato and other foodstuffs that also look a bit like potatoes in variety of ways. Two glasses sit before the teenagers, as does salt and pepper shakers and a small plate with what looks like half a boiled potato topped with slices of cucumber. In the background another waiter is walking past towards a man in a dark white and white shirt (only just visible). The room has wooden panelling and a beige concertina window, possibly concealing the kitchen behind. The wording under the picture reads "Lance and Darren experiencing silver service at a C.O.H.A.T restaurant". This could have been part of a dining experience between students who came to Burwood school and a local TAFE college.Digital image of two boys at a restaurant with a waiterrvib burwood school, education

BHS CollectionSouvenir spoon - Flynn's Church Alice Springs. EPNS> Oval shaped motif of Flynn's Church at Alice Springa. Leaf shaped pattern on handle.Peninsula Plate EPNS A1ephemera, mementoes, silver plated spoon

Mess tins were used to prepare or heat food, but thay were also used as a container from which to eat or drink. The tins are lightweight and sturdy but they became hot very quickly when heated.Used by Australian military servicemen during WW1Two piece "D" shaped silver coloured metal mess tin and lid. Used by Australian military servicemen during WW1, it is believed to be based on a British design. Made of tin plated steel, this mess tin has a wire rod carrying handle and rectangular metal wire clips for a shoulder strap, attached to the top section of the mess tin by metal rivets and straps. There is a metal wire rod folding handle mounted on the inside of the removable lid section. The mess tin has a folded seam on the bottom edge and along the left hand side. A wire rod is mounted around the top section of the mess tin as a base for the removable lid. The lid has a folded metal seam on the top edge and along the left hand side. The bottom edge of the lid is folded around a metal wire rod.A. SIMPSON & SON LTD 1916 ADELAIDEmess tin, ww1, australia, military, metal, two piece

Used by the MMTB to indicate to Inspectors and the public, the driver or conductor traffic number or their personnel number. This number would appear on all reporting documents.Demonstrates a MMTB employee or traffic number badge.Set of two badges - numbered, "2116" and "2119", nickel plated brass to give a silver finish, with the numbers fixed to a bar top and bottom and two lugs on the rear to clip into a cap. Have been mounted onto a card with the clips used in practice. Made by Stokes and Sons Melbourne - has been stamped onto the rear. tramways, trams, mmtb, operations, badges, crews, drivers, conductors, personnel, employees

Item engraved with MCH (Margaret Coles maternity wing at the Alfred Hospital). MCH opened in 1943. "This maternity wing, which has been named after Mrs Coles, wife of Mr G. J. Coles, who gave more than £35,000 toward it." "The hospital's Margaret Coles House delivered maternity services from 1943-1984."An item that was used in MCH which is no longer in existence. Triangular with three bars of equal size with diamond shaped engraved crest 1st/ Floor/ M.C.H. / Hexagram star shaped emblem/ scroll inscribedmch, ahnl, alfred hospital, alfred hospital nurses league, melbourne hospitals, margaret coles, maternity care, obstetrics, midwifery

Portrait of David Duncan, the first treasurer of the Port Phillip Farmers' Society. A five-piece silver tea service given to Duncan and held by the family for 135 years was donated to the RASV in 1987. The painting is part of a pair with a portrait of Duncan's wife, Alexina Duncan.Oil Portrait In Heavy Elaborate Gilt Timber Frame. Envelope taped to back containing a press clipping from 'Country News', September 27, 1992 about David Duncan.ON BRASS PLATE -PRESENTED FOR ALEXINA DUNCAN BUTCHER BY HER FAMILY .THE ORIGINAL AUSTRALIAN ANCESTORS. DAVID DUNCAN TREASURER OF THE PORT PHILLIP FARMERS SOCIETY, FOUNDED 1848. RASV 4L ON BACKduncan, david duncan, rasv, royal agricultural society of victoria