Showing 369349 items
matching not degrees
-
Orbost & District Historical Society
wash board
Glass washboards were popular during World War II due to a shortage of metal. The body was made of wood, but the scrubbing area was glass. Washboards were normally two-sided with one side having more refined ridges and also came in a variety of sizes. The smaller washboards were used for delicates such as undergarments and petticoats, while larger washboards were used for such items of clothing as shirts and pants. They were used over the laundry tubs. (ref. Antique Traders)This glass scrubbing board is an example of the typical laundry equipment used by families in the Orbost district in the early 20th century.A rectangular glass washboard with a wooden frame. The glass insert is corrugated glass and the backing at the top is original. Frame is new (original had borer damage).On backing at top - Possum trademarklaundry-equipment washing scrubbing-board -
Orbost & District Historical Society
rabbit trap, first half 20th century
During the Great Depression from 1929 to 1932, rabbit trapping was a means of survival for many people. Rabbits provided meat and pelts which were sold for making felt hats such as the Akubra. Rabbit populations are controlled in the 21st century by poisoning, destroying or 'ripping' burrows (warrens), biological control with rabbit haemorrhagic disease and myxomatosis, and by shooting. Rabbit-proof fences also prevent the spread of rabbits into some areas. (ref. Powerhouse Museum) This trap was used in the Orbost district. Steel-jawed rabbit traps were widely used in urban and rural Australia from 1880 to 1980. This trap is symbolic of the battle that Australians have waged against burgeoning rabbit populations for over a century. Rabbits cause enormous damage to Australian soils and biodiversity. The introduction of rabbits to this country was an environmental disaster.A rusted iron rabbit trap which consists of a pair of jaws held closed by spring tension and a triggering mechanism. When the trap is triggered the jaws close over the top of the bridge, plate and tongue mechanism that is designed to trigger the trap. A chain is attached by a hook on the bent end of the trap's spring with a long steel spike looped over the last link of the other end of the chain. The trap is designed so that the metal jaws snap shut against each other when the trap is activated by the application of weight to the pressure plate. In use, traps are set with open jaws, buried lightly just below the surface of the earth. When an animal steps on the pressure plate, the jagged teeth of the jaws snap around the animal's leg, usually breaking bone and sinew. Thus the animal is immobilised. rabbit-trap rural -
Orbost & District Historical Society
bit, late 19th century - early 20th century
A bit is a type of horse tack used in equestrian activities, usually made of metal or a synthetic material, and is placed in the mouth of a horse to assist a rider in communicating with the animal. It rests in the mouth where there are no teeth.Horses played a vital role in the agricultural history of Orbost. This item is connected to that role.An iron horse bit. It has a small piece of leather at one end - possibly from the bridle. It has a piece of wire attached as a hook for hanging.equestrian horse-bit transport -
Orbost & District Historical Society
buggy spanners, late 19th century -early 20th century
These were used on a horse-drawn wagons, carriages, stagecoaches, and carts. A wheelwright would use this tool to make or repair the wheels. All sizes of buggy spanners, or wagon wrenches, were needed as wagon wheels were of many different sizes. Horse-drawn wagons are an important part of Australia’s agricultural history. Light buggies were popular with farmers for trips into town before the common use of motorised vehicles.A collection of thirteen iron wheel spanners on an iron hook. One spanner has a wooden handle and is an adjustable spanner.tool wagon-wrench-spanner transport -
Orbost & District Historical Society
sledge hammer, first half 20th century
A sledge hammer is generally wielded with both hands and is used for driving wedges and posts and for other heavy work. It can be used to remove concrete slabs, to drive heavy steel bolts into concrete, to hammer large stakes as well as for demolition.This item was a common tool used by farmers or blacksmiths.A large flat hammer with a wooden handle.Underneath hammer - 10hammer sledge-hammer tool -
Orbost & District Historical Society
food safe, from the 1890s until the mid 20th century
A food safe was a piece of domestic equipment widely used in Australia before refrigeration to preserve perishable food in summer. A food safe was a common domestic item widely used in rural Victoria before cheap refrigeration was available.A rectangular tin food safe. It is painted green and has thin wire bent into a triangular shape for hanging.Inside is a cream coloured painted shelf. It has six circular air vents on three sides and four on the door.domestic food-preservation food-safe -
Orbost & District Historical Society
coal scuttle, first half 20th century
Coal scuttles or hods were made with some sort of tipped lip that made it easy to pour out the lumps of coal. It also was used to carry ashes away from the fireplace. This one could have been used to carry firewood more likely to be used in Orbost.A metal coal scuttle with two handles - a tipping handle and a carrying handle. scuttle fireplace-accessories domestic -
Orbost & District Historical Society
fish landing net, first half 20th century
This landing net is a small, bag-shaped net with a long handle at the mouth, for scooping a hooked fish out of the water and bringing it to shore or into a boat. this one is home-made by an Orbost angler.This fishing net is an example of a home-made piece of equipment. It shows the self-reliance of rural people.A home-made fish landing net. It has a long wooden handle. Hose clamps hold the wire frame of the net,. The end of the bag shaped string net is bound with tape.fishing-net handcraft -
Orbost & District Historical Society
ornament, first half 20th century
This item shows the creativity and resourcefulness of rural families in the early 20th century.Seven iron horse shoes welded together to make an ornament.horse-shoes ornament -
Orbost & District Historical Society
double bag hook, late 19th -first half 20th century
This hook was probably used in lift sacks of corn / maize to the lofts in the barns using a pulley beam system sometimes driven by a small tractor or a horse.This item is connected to the agricultural history of the Snowy River flats of the Orbost district. Intensive farming for maize was an integral part of the history of Orbost.A double bag hook consisting of two double metal hooks on a metal ring.bag-hook rural -
Orbost & District Historical Society
vice, c 1950's
This vice is used to secure an object to allow work to be performed on it. It would have been attached to a workbench.A large metal bench vice. It has two parallel jaws, one fixed and the other movable, threaded in and out by a screw and lever.Dawn 3 1/2bench-vice -
Orbost & District Historical Society
scythe blade, late 19th - early 20th century
Scythes were used to manually mow wheat or grass. Scythes were used with a long sweeping movement which made them much less tiring for labourers to use than reaping hooks or sickles though they still involved great physical labour and considerable skill to perfect. Both hands were in use and the operator did not have to bend his back to reach down to the crop. On farms scythes were sharpened on a sandstone wheel mounted on an axle with a crank handle on one side. This was hand powered and used with water. Scythes were not used as often on farms after the mechanisation of harvesting. They were still used for cutting awkward shaped small plots and for opening a path for the tractors. This item is an example of a tool used by the early settlers of the Orbost district. An iron scythe blade, curved and tapered. There is no handle and the blade is rusted and pitted."ROSE"scythe tool agriculture rural -
Orbost & District Historical Society
horseshoes, first half 20th century
This item shows the creativity and resourcefulness of rural families in the early 20th century.Three iron horseshoes welded together for use as an ornament or hanging hooks.horseshoes iron ornament -
Orbost & District Historical Society
horse winkers, late 19th -mid 20th century
This set of winkers was probably used on draught horses in farming.Horses played a vital role in the agricultural history of Orbost. This item is connected to that role.A set of horse winkers made of dark brown leather with a metal chain bit. The strap which goes behind the ears is green hide - possibly not original. winkers horse-equipment equestrian agriculture -
Orbost & District Historical Society
road flares, First half 20th century
These flares were possibly used during WW11. They were used by Orbost Aero Club at Marlo from 1964 onwards for transporting patients by aerial ambulance to Melbourne. They were placed on the L.H.S. of the runway to indicate wind direction. They were superseded in the late 1970's by pilot activated lighting (PAL) switched on by incoming pilots via radio.These lamps are associated with the history of the Orbost Aero Club.Eight kerosene smudge pot road flares - round metal bases painted red. There is a reservoir at the bottom used for kerosene storage. It was lit at the top for flare.DIETZ . 51 Use Kerosene only Made in U.S.A.lighting kerosene-flares road-flares beacons marlo-airport -
Orbost & District Historical Society
scythe, early -mid 20th century
Scythes were used with a long sweeping movement which made them much less tiring for labourers to use than reaping hooks or sickles though they still involved great physical labour and considerable skill to perfect. Both hands were in use and the operator did not have to bend his back to reach down to the crop. Scythes were not used as often on farms after the mechanisation of harvesting. They were still used for cutting awkward shaped small plots and for opening a path for the tractors. This item is an example of a tool used by the early settlers of the Orbost district.A curved iron blade with one sharp edge. It is attached to a curved hollow handle with two extensions on one side where the scythe can be held by two hands.scythe agriculture tool -
Orbost & District Historical Society
pump, late 19th -early 20th century
Hand operated water pumps were used to supply water prior to the widespread use of windmill pumps, electric pumps and city water systems. Usually an old pump was made from cast iron, wood or tin. Pumps were very important to people up through the 19th century as farm houses seldom had indoor plumbing with running water. These pumps were also used for outdoor irrigation or laundry purposes.Hand operated water pumps were important before indoor plumbing was adequate. An iron water pump - hand-operated by a lever to the side. A plunger moves up and down (missing). It has a spout and has been painted brown.pump-water irrigation rural -
Orbost & District Historical Society
pair of hames, late 19th - early 20th century
Hames are attached to a horse collar used to distribute the load around a horse's neck and shoulders when pulling a wagon or plough. The collar often supports and pads a pair of curved metal or wood pieces, called hames, to which the traces, which attach to the wagon or plough, of the harness are attached. The collar allows the horse to use its full strength when pulling. This pair of hames would have been used on a farm in the Orbost district.Horses were a vital part of the agricultural industry in Orbost before the mechanisation of farm machinery. This item is associated with that time.A pair of hames, joined together by a metal chain. Iron has been cased over wood to form the hames. Each has a hook attached and a ring.WARRANTED picture of bull's head FORGEDsaddlery equestrian agriculture horses hames -
Orbost & District Historical Society
horse hames, late 19th -early 20th century
Hames are attached to a horse collar used to distribute the load around a horse's neck and shoulders when pulling a wagon or plough. The collar often supports and pads a pair of curved metal or wood pieces, called hames, to which the traces, which attach to the wagon or plough, of the harness are attached. The collar allows the horse to use its full strength when pulling. This pair of hames would have been used on a farm in the Orbost district. Horses played a vital role of the agricultural industry in Orbost before the mechanisation of farm machinery. This item is associated with that time.A pair of hames, iron shaped over a wooden frame. They are linked together by a metal chain. Each has a hook attached and a metal ring at the end.WARRANTED PLOUGHMANBRAND FORGEDequestrian saddlery rural agriculture horses hames -
Orbost & District Historical Society
pair of horse hames, late 19th -early 20th century
Hames are attached to a horse collar used to distribute the load around a horse's neck and shoulders when pulling a wagon or plough. The collar often supports and pads a pair of curved metal or wood pieces, called hames, to which the traces, which attach to the wagon or plough, of the harness are attached. The collar allows the horse to use its full strength when pulling. This pair of hames would have been used on a farm in the Orbost district. Horses were a vital part of the agricultural industry in Orbost before the mechanisation of farm machinery. This item is associated with that time.A pair of horse hames, iron shaped over a wood frame and linked together by a metal chain and hook. Each has a hook attached and a ring at the end held by string,WARRANTED SWAN BRAND FORGEDsaddlery horses hames agriculture rural equestrian -
Orbost & District Historical Society
pair of horse hames
Hames are attached to a horse collar used to distribute the load around a horse's neck and shoulders when pulling a wagon or plough. The collar often supports and pads a pair of curved metal or wood pieces, called hames, to which the traces, which attach to the wagon or plough, of the harness are attached. The collar allows the horse to use its full strength when pulling. This pair of hames would have been used on a farm in the Orbost district. Horses were a vital part of the agricultural industry in Orbost before the mechanisation of farm machinery. This item is associated with that time.A pair of all metal horse hames, flat and angular shape. They are held together by a metal chain. Each has a hook attached and a metal ring at the end. One of the chain links has been repaired with wire.DOWNEE ALL STEELequestrian saddlery horses agriculture rural hames -
Orbost & District Historical Society
sieve, First half 20th century
Possibly used for sieving bean seeds or corn seeds. Could have been a sand sieve.A round wooden framed sieve. It has a double frame with 1/4 " wire mesh held in through two frames. It has a galvanised iron inset.sieve agriculture tool -
Orbost & District Historical Society
sieve, First half 20th century
Probably used in the local bean growing industry. The Orbost area was once a large bean growing area as the fertile snowy River flats produced good quality beans. It was exported to other states of Australia. Green beans were sent to Melbourne by train and later to Sydney, either via Bombala where they were railed, or to Eden to continue the journey on fish trucks. One pound per bag was considered a good price in the early 1920's and pickers were paid one shilling and sixpence. (Ref: Newmerella Valley of Plenty)A round wooden framed sieve. The frame holds the wire mesh sieve. It is braced with seven thin wire strips.sieve agriculture tool -
Orbost & District Historical Society
horse winkers, late 19th -mid 20th century
This set of winkers was probably used on draught horses in farming.Horses played a vital role in the agricultural history of Orbost. This item is connected to that role.A set of horse winkers made of dark brown leather with a metal chain bit. There are two leather cups that are placed on either side of the eyes. agriculture winkers blinkers horse farming -
Orbost & District Historical Society
horse winkers, late 19th century - mid 20th century
This set of winkers was probably used on draught horses in farming.Horses played a vital role in the agricultural history of Orbost. This item is connected to that role.A set of dark leather horse winkers. There is a metal chain bit and a leather strap to go around the top part of the horse's head.winkers blinkers farming agriculture horse -
Orbost & District Historical Society
harness, first half 20th century
This harness would have been used on a rural property in the Orbost district.Horses played a vital role in the agricultural history of Orbost. This item is connected to that role.A dark brown leather horse harness with a britchen strap.harness horse farming rural -
Orbost & District Historical Society
wheel
A cast iron wheel. The rim is ridged with fine teeth. In the centre is a fixed axle - bent and snapped off. It has six circular holes.wheel cast-iron machinery -
Orbost & District Historical Society
cross cut saw, first half 20th century
Crosscut saws are used to cut down trees and to saw the trunks to length. This is a two man cross cut saw. The two-man crosscut saw has wooden handles that fit into a steel socket at each end. The teeth are designed to enable both users to have equal strength.Orbost has historically been based on the timber industry and it remains an important but diminishing economic activity. Timber cutting tools are reminders of this history.A steel bladed cross cut saw with wooden handles that fit into a steel socket at each end. The blade has one straight edge and a toothed curved edge. saw timber cross-cut-saw tool -
Orbost & District Historical Society
harness
The spider harness was specifically designed for fall protection at heights and in any hanging direction.It can be used in rescue situations. It is a fully adjustable harness.A leather harness with chains (called a spider). A round piece with leather straps threaded through and chains attached to both sides. It has metal (brass?) rivets. On each end is a large hook.harness-spider -
Orbost & District Historical Society
hames and traces, late 19th century - first half 20th century
Hames are attached to a horse collar used to distribute the load around a horse's neck and shoulders when pulling a wagon or plough. The collar often supports and pads a pair of curved metal or wood pieces, called hames, to which the traces, which attach to the wagon or plough, of the harness are attached. The collar allows the horse to use its full strength when pulling. This pair of hames would have been used on a farm in the Orbost district for pulling ploughs or other farm implements.Horses were a vital part of the agricultural industry in Orbost before the mechanisation of farm machinery. This item is associated with that time.Wooden hames with leather traces which have chains and springs (to absorb shock) on each end.equestrian rural farming harness traces